共查询到20条相似文献,搜索用时 187 毫秒
1.
2.
现阶段国内外的汽车企业都非常重视空气弹簧在车辆悬架系统中的运用与研究,由于空气弹簧独特的非线性刚度特性使得其在汽车悬架系统中能够起到很好的减振作用,提高车辆的平顺性能和舒适性能。高端重型卡车空气弹簧进行了刚度测试实验,然后运用ABAQUS软件对空气弹簧进行了有限元建模与刚度特性分析,将刚度测试实验结果与有限元分析结果进行比对验证了仿真结果的正确与可行性,同时确定了其他工作行程所需数据可以通过仿真数据进行模拟来实现,为后续的空气弹簧悬架子系统的动力学模型的建立提供了较为完整的数据资料。 相似文献
3.
4.
5.
对采用新型单片Z字型变截面钢板弹簧的复合式空气悬架进行了刚度分析,从理论上验证了其可行性.给出了复合式空气悬架结构的设计实例,利用UGNX进行Z型钢板弹簧的三维建模,利用HYPER MESH对空气悬架所采用的新型Z型钢板弹簧进行网格划分并应用Patran对其进行有限元分析,确定了钢板弹簧在极限载荷下的应力和应变状态.通... 相似文献
6.
在已有的普通悬架螺旋弹簧设计系统的基础上,以减振器侧向力作为侧载螺旋弹簧的设计目标,应用有限元方法进行结构优化设计。利用C++ Builder编程工具,借助有限元软件,将此优化算法程序化。自动生成ABAQUS有限元模型。包括六面体网格自动生成、边界条件自动施加等,并通过后台调用ABAQUS求解器完成侧载螺旋弹簧的有限元分析。同时系统还能够进行侧载弹簧的精确建模,实现了侧载弹簧的优化设计。 相似文献
7.
8.
针对特殊行驶工况下空气悬架客车横向动力学失稳现象的揭示问题,本文中提出一种系统非线性动力学建模和稳定性分析方法。为准确反映空气悬架客车横向动力学演化规律,建立了考虑空气弹簧和轮胎非线性力学特性的系统3自由度动力学模型。为实现复杂高维动力学系统的稳定性分析,首先基于中心流形理论对系统进行降维处理,而后对得到的约化系统进行定性性态分析,确定了系统满足鞍结分岔的充分必要条件。设置4种工况对空气悬架客车横向动力学系统在平衡点处的分岔行为进行了相平面分析,掌握了空气悬架客车在不同路面条件下随车速及前轮转角变化的横向动力学失稳演化规律,最后基于整车动力学进行仿真验证表明解析分析结果与仿真分析结果一致,证明本文提出的非线性稳定性分析方法有效可行。 相似文献
9.
汽车用膜式空气弹簧的非线性有限元分析 总被引:2,自引:0,他引:2
简述空气弹簧在汽车空气悬架使用中的优点,采用非线性有限元分析技术分析空气弹簧的非线性特性,得到不同帘线角的空气弹簧在不同载荷作用下的形变特性。 相似文献
10.
本文说明了汽车电子悬架系统中的两种类型---变刚度空气弹簧系统和变阻尼减振器系统的各自组成部件及其结构,分析了它们的工作原理。 相似文献
11.
P. Karimi Eskandary A. Khajepour A. Wong M. Ansari 《International Journal of Automotive Technology》2016,17(5):807-816
Suspensions play a crucial role in vehicle comfort and handling. Different types of suspensions have been proposed to address essential comfort and handling requirements of vehicles. The conventional air suspension systems use a single flexible rubber airbag to transfer the chassis load to the wheels. In this type of air suspensions, the chassis height can be controlled by further inflating the airbag; however, the suspension stiffness is not controllable, and it depends on the airbag volume and chassis load. A recent development in a new air suspension includes two air chambers (rubber airbags), allowing independent ride height and stiffness tuning. In this air suspension system, stiffness and ride height of the vehicle can be simultaneously altered for different driving conditions by controlling the air pressure in the two air chambers. This allows the vehicle’s natural frequency and height to be adjusted according to the load and road conditions. This article discusses optimization of an air suspension design with ride height and stiffness tuning. An analytical formulation is developed to yield the optimum design of the new air suspension system. Experimental results verify the mathematical modeling and show the advantages of the new air suspension system. 相似文献
12.
13.
载人车室内部空气流场温度场的数值模拟 总被引:3,自引:1,他引:3
本文通过人体热特性分析,讨论了人体热边界条件的确定,在载人车室内部空气流动数值计算的基础上,对人体的热边界条件的选取进行了研究探讨,在此基础上建立了数字式暖体假人模型,为汽车空调热舒适性研究提供分析工具。 相似文献
14.
针对某重型车进气系统,在Hyperworks11.0→Engineering Solutins11.0-CFD中对其进行了含边界层的非结构网格划分。由于进气系统空滤器部分空气流动方向不唯一,仿真计算结果中空滤器部分按多孔介质模型处理时与试验结果差别较大,故对空滤器部分按StarCCM+多孔Baffle处理,并对进气系统进行了流体动力学仿真分析,得到了额定工况下进气系统流场的分布和不同工况下的进气阻力及空滤阻力。最后将空滤器仿真结果与试验结果进行比较,进一步验证了仿真结果的准确性。 相似文献
15.
Power Requirements for Vehicle Suspension Systems 总被引:1,自引:0,他引:1
D. Karnopp 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》1992,21(1):65-71
This paper attempts to analyze the power requirements of a vehicle due solely to its suspension system, neglecting the important powers associated with air and rolling resistance. Power requirements for active and passive suspensions are compared using the simplest possible mathematical model. A mass in a gravity field moves at constant velocity over a surface and is supported by a point contact on the surface by a massless but otherwise arbitrary suspension system. It is shown that the average propulsive power required is equal to the average power lost in the suspension. In the limit cases of very stiff or very soft suspensions this power vanishes. Passive suspensions require no other power, but active suspensions may require significant extra power from the prime mover to generate the suspension forces. 相似文献
16.
17.
对多传感器信息融合技术作了简要介绍,并结合汽油机过渡工况空燃比控制系统的要求与特点,探讨了信息融合技术用于空燃比控制系统的基本层次结构。将信息融合的层次与空燃比控制的功能相对应,提出了汽油机过渡工况空燃比控制的信息融合模型,进而对汽油机空燃比系统中信息融合在不同层次上的实现方法进行了讨论。 相似文献
18.
19.
实测轻型货车轮载作用下沥青路面力学响应分析 总被引:1,自引:1,他引:1
作者利用自己实测的轮胎接地压力分布,用三维有限元方法分析了轻型货车不同轮胎,在不同胎压和不同负荷作用下,沥青路面结构层的力学响应。结果表明:实际的轮胎接地压力分布具有明显的非均匀性,且随轮胎的结构类型、花纹、胎压、负荷甚至使用年限的不同而有很大的差异。轻型货车对路面结构产生的应力响应不能忽视。 相似文献