共查询到20条相似文献,搜索用时 390 毫秒
1.
汽车风挡玻璃作为重要的外饰功能零件,其周边的尺寸匹配是评价整车外观质量的重要指标.风挡玻璃在安装过程中受拍击易产生变形,进而影响玻璃与周边零件外观尺寸配合质量.文章介绍了用CAE软件仿真后举门玻璃安装变形情况;通过研究安装过程中的拍击力(动载)转化为CAE模型特定位置等效持续力(静载)的方法,建立了风挡玻璃受力CAE模... 相似文献
2.
文章采用DIC(Digital Image Correlation)技术对汽车门饰板在座椅侧气囊点爆时变形及受力情况进行测试,研究了内饰板关键区域的三维光学测试方法,获得门饰板受到气囊点爆时高速撞击产生的变形和云图,通过云图可以表征出毫米级微观区域材料的应变。进一步开发和分析应变数据,计算零件受到的应力。测试结果表明:将实测结果与仿真数据在同一软件中对齐,可以输出相同的网格结点坐标及应变。结合材料高应变拉伸数据及内饰板的应变速率,可以初步预测不同时刻不同区域的应力,为提高仿真准确性提供支持。 相似文献
3.
汽车内饰除了为乘员提供舒适的驾驶体验外,当发生碰撞时,还要起到乘员保护的作用.为了提高内饰件仿真分析效率,文章根据美国联邦机动车安全标准FMVSS201,使用Generator软件提供的碰撞点选取及头模定位等功能,以A柱为研究对象,建立了CAE仿真模型,分析了乘员头部受力情况,通过与试验结果的比较,验证了该方法的准确性.因此,该方法为内饰件仿真分析提供了一种更高效和精确的方法. 相似文献
4.
5.
6.
7.
济南兰光机电技术公司新近研制成国内首台汽车内饰件雾化测试仪,为理想内饰材料的选择提供了科学高效的检测方法。在高温作用下,汽车内饰材料蒸发出的易挥发性成分会凝结在挡风玻璃或车窗上,造成视线不良并影响行车安全。这款FT-F1雾化测试仪模拟汽车置于阳光照射的状况,采用高温加速完成蒸发过程, 相似文献
8.
9.
装配了侧气帘后,汽车内饰设计成为侧气帘静态展开试验的一大障碍。文章从设计实践出发,结合侧气帘试验中内饰件的破坏形式,对装配侧气帘汽车的内饰件设计给出优化顶蓬结构、立柱饰板合理选材及强化遮阳板连接结构等设计方案和数据,有效地避免了内饰件在侧气帘静态展开试验中发生破损的现象,从而确保装配了侧气帘的汽车可以顺利通过试验。 相似文献
10.
11.
仪表板简称IP(Instrument Panel),是汽车内饰的重要组成部分,它是集功能性、安全性、舒适性与装饰性为一体的部件,仪表板应有较好的吸能性,能抵抗一定的冲击,使其在发生意外时,减少外力对正、副驾驶员的冲击;仪表板区域布置各种形式的出风口、储物盒、烟灰缸以及扶手箱,安装设计非常巧妙,设计风格各异,充分考虑人机... 相似文献
12.
文章所用车身为某车厂开发的一款新型商用车,车身结构为非承载式车身,相较于承载式车身而言,非承载式车身多了底盘大梁架,在遇到碰撞或者冲击时,车架的振动通过弹性单元传到车身,可以削减大部分冲击力,车身的安全性得以保证,在恶劣道路上,可以保证其稳定性和舒适性,车内噪声和振动也较小。车身主要包括了白车身、车门、座椅、中控、内外饰等主要总成。车身主体大部分都是钣金类零部件,文章所述的车身钣金件有624个,文章完成了车身钣金件的网格划分和属性赋予,并对白车身整体进行了网格质量的验证,并完成了车身模态从1阶到6阶的校核,证明了白车身模态的合理性。 相似文献
13.
汽车碰撞变形区域的测量是交通事故处理及事故再现的重要工作,利用基于图像的三维建模软件Image Modeler.可以直接通过按照一定原则拍摄的二维照片,恢复和重构三维模型,有利于提高变形车辆测量的效率和精度。文章介绍了基于二维照片的三维建模基本原理,阐述了利用该技术实现汽车碰撞变形区域三维重建的过程,实验表明,此方法能提供详细的汽车碰撞变形区域描述,对交通事故的公平处理和科学研究提供有力的参考。 相似文献
14.
Gao Chang Yang Liangliang Zhang Min Luo Shihui 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2018,56(3):366-384
With the increase of railway wagon axle load and the growth of marshalling quantity, the problem caused by impact and vibration of vehicles is increasingly serious, which leads to the damage of vehicle structures and the components. In order to improve the reliability of longitudinal connection model for vehicle impact tests, a new railway wagon longitudinal connection model was developed to simulate and analyse vehicle impact tests. The new model is based on characteristics of longitudinal force transmission for vehicles and parts. In this model, carbodies and bogies were simplified to a particle system that can vibrate in the longitudinal direction, which corresponded to a stiffness-damping vibration system. The model consists of three sub-models, that is, coupler and draft gear sub-model, centre plate sub-model and carbody structure sub-model. Compared with conventional draft gear models, the new model was proposed with geometrical and mechanical relations of friction draft gears considered and with behaviours of sticking, sliding and impact between centre plate and centre bowl added. Besides, virtual springs between discrete carbodies were built to describe the structural deformation of carbody. A computation program for longitudinal dynamics based on vehicle impact tests was accomplished to simulate. Comparisons and analyses regarding the train dynamics outputs and vehicle impact tests were conducted. Simulation results indicate that the new wagon longitudinal connection model can provide a practical application environment for wagons, and the outputs of vehicle impact tests agree with those of field tests. The new model can also be used to study on longitudinal vibrations of different vehicles, of carbody and bogie, and of carbody itself. 相似文献
15.
驾驶室内饰设计最重要的是舒适性,舒适性由使用功能与审美功能决定,使用功能为内饰设计体现工程机械原理及人机学,能带给驾乘人员操作上的舒适感,而审美功能则着重于外观造型与色彩搭配,能带给驾乘人员视觉上的舒适感,从而达到精神上的愉悦感,由此可见色彩搭配的重要性。商用车最重要的是运输功能,司机长途跋涉的开车过程易产生疲劳感,而良好的内饰设计可通过造型和色彩搭配直接冲击司机视觉从而缓解疲劳。而此论文就主要介绍色彩及色彩搭配的基本知识,并通过奔驰Actors作为经典案例来介绍如何设计好驾驶室内饰色彩搭配。 相似文献
16.
17.
在某车型开发过程中针对整车车内噪声较大的问题,使用实验的方法对影响NVH性能的主要声学零件进行了分析,其中地毯作为最大面积的零件,重点研究不同材料、密度及工艺过程对其吸声性能的具体影响,实验结果表明针刺毯面中PE淋膜对地毯正面吸声性能影响较大,毯面克重及背部吸声材料覆盖面积的提升都可有效提升地毯正面的吸声性能,在地毯初始方案上进行的改进,包括更改PE撒粉工艺、增加背部PET成型毡覆盖面积,地毯吸声系数提升超过30%,满足了整车NVH性能需求。 相似文献
18.
S. M. Yang S. H. Yoo D. S. Gi S. B. Choi K. S. Kim N. T. Jeong S. U. Choi M. W. Suh J. H. Lee 《International Journal of Automotive Technology》2016,17(4):671-679
While a screw is a fastening element that can tighten the two parts at low cost, the loosening of the screw is generated due to external forces such as repetitive load, vibration, and thermal stress. This phenomenon decreases the initial clamping force, and this can be a serious problem to the safety of the product. However, while fastening parts are handled through experiment and experience, there is a lack of research on the screw loosening of plastic fastening parts. For example, vehicles have various fastening parts. Among the fastening elements, screws are typically used for tightening parts of the vehicle door trim. Vehicle interior materials are mainly composed of plastic parts. Especially, the temperature of the vehicle interior changes from a sub-zero temperature to 100 degrees (°C) due to solar radiation. Unlike metals, plastic materials are commonly susceptible to the environment. In this study, the fastening screw of automotive door trim parts is selected. First, a screw loosening mechanism is implemented through Computer Aided Engineering (CAE) analysis and the influences of degradation are then analyzed. Secondly, the selecting method of clamping force is suggested through the analysis result of reduction according to the tightening torque. 相似文献
19.
我国侧面碰撞安全法规和新车评价体系都对侧面碰撞提出了“在碰撞过程中车门不得开启”的要求。文章对某车型开发过程中出现的后门开启问题进行了深入分析和研究,通过在侧碰分析模型中加入门锁系统有限元模型,找出了门把手区域在碰撞时发生过大的翻转是导致后门开启的原因。根据该原因,提出了门外板上部加强件下延以及门把手下部增加贴片的改进方案,成功解决了门锁开启的问题。通过研究可以得出:在侧面碰撞分析模型中建立详细的门锁系统的模型,不仅能更准确地模拟侧门的变形,而且能很好地发现和解决门锁的自动解锁问题。 相似文献
20.
通过四款目标车的整车气密性试验,得到这四款车型的当量孔面积,从而设定了车身的气密性目标,再改进车身各部位的密封设计,提高焊装、涂装和总装过程的工艺精度,最终降低了车内高速风噪声。 相似文献