共查询到20条相似文献,搜索用时 78 毫秒
1.
在系统分析了现有的道路三维模型构建方法的基础上,提出了一种将道路设计面模型与地形表面模型融为一体的整体模型构建方法,该方法基于约束Delaunay三角网内插入点和约束边的理论,利用逐点插入算法原理和Windows文件映射技术,快速实现了道路设计面与地形表面的整体建网.应用道路整体模型可以实现道路景观的三维漫游,评价三维立体线形以及与周围地形的配合情况. 相似文献
2.
道路与地形整体模型的构建是实现道路三维可视化的关键。基于在约束delaunay三角网中插入点和约束边的理论,提出一种道路设计面模型的构建方法以及其与地形表面模型融为一体的整体模型构建方法,使得道路设计面模型和地表模型不仅表面上是整合在一起,并且其内部关系也是统一的。对其原理、方法及程序实现进行了介绍。 相似文献
3.
道路与地形整体模型的构建是实现道路三维可视化的关键.论文基于在约束delaunay 三角网中插入点和约束边的理论,提出一种道路设计面模型的构建方法以及其与地形表面模型融为一体的整体模型构建方法,使得道路设计面模型和地表模型不仅表面上是整合在一起的,并且其内部关系也是统一的.对其原理、方法及程序实现进行了介绍. 相似文献
4.
道路与地形整体模型的构建是实现道路三维可视化的关键。论文基于在约束delaunay三角网中插入点和约束边的理论,提出一种道路设计面模型的构建方法以及其与地形表面模型融为一体的整体模型构建方法,使得道路设计面模型和地表模型不仅表面上是整合在一起的,并且其内部关系也是统一的。对其原理、方法及程序实现进行了介绍。 相似文献
5.
6.
《公路工程》2017,(4)
当前,基于城市道路信息模型构建来实现对道路设计和施工过程的三维动态化还处于探索阶段。提出了将BIM技术应用于城市道路建设中,构建基于道路设计施工的信息模型理念,利用BIM构建了基于道路线性选择的指标参数,同时引入Civil 3D软件构建三维虚拟模型,提取相应的模型参数,并利用建立的指标评价体系进行了不同线性选型的方案对比,获得最佳的线路设计效果。研究结果表明:采用BIM技术下的三维地形曲面获得的模型结构更为直观,模型指标层次分析更具优势,模型参数的结果计算更精确;通过融合Civil 3D和BIM技术,将信息模型参数应用于道路综合设计、施工模拟和道路景观设计、行驶舒适度体验等道路工程项目全周期都具备了很强的适应性。可产生良好的经济效益。 相似文献
7.
8.
9.
10.
11.
12.
SMA是沥青码蹄脂碎石(Stone Matrix Asphal)的缩写,是一种以沥青结合料与少量的纤维稳定剂、细集料,以及较多的填料(矿粉)组成的沥青玛蹄脂,填充于间断级配粗集料骨架间隙中组成一体所形成的沥青混合料,简称SMA。该文介绍了SMA在上海的应用及其施工技术。 相似文献
13.
14.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(4):573-596
An existing driver–vehicle model with neuromuscular dynamics is improved in the areas of cognitive delay, intrinsic muscle dynamics and alpha–gamma co-activation. The model is used to investigate the influence of steering torque feedback and neuromuscular dynamics on the vehicle response to lateral force disturbances. When steering torque feedback is present, it is found that the longitudinal position of the lateral disturbance has a significant influence on whether the driver’s reflex response reinforces or attenuates the effect of the disturbance. The response to angle and torque overlay inputs to the steering system is also investigated. The presence of the steering torque feedback reduced the disturbing effect of torque overlay and angle overlay inputs. Reflex action reduced the disturbing effect of a torque overlay input, but increased the disturbing effect of an angle overlay input. Experiments on a driving simulator showed that measured handwheel angle response to an angle overlay input was consistent with the response predicted by the model with reflex action. However, there was significant intra- and inter-subject variability. The results highlight the significance of a driver’s neuromuscular dynamics in determining the vehicle response to disturbances. 相似文献
15.
预应力曲线箱梁和异形箱梁的研究 总被引:7,自引:0,他引:7
近年来 ,国内外学者对曲线箱梁和异形箱梁的静力分析理论和计算方法作过大量的研究 ,但这些理论和方法在某种程度上都存在着一定的局限性 ,特别是在实际设计工作中 ,运用起来不能得心应手。为此本文在综合前人已取得经验下 ,针对桥梁结构设计中分析曲线箱梁、异形箱梁 ,经常遇到的难题进行了研究 ,建立一个较为完善的理论和方法 ,编制了等参元空间分析程序。在实际工程中进行实桥试验 ,验证了本文理论和方法的正确性。本文的研究工作更准确描述了箱梁的荷载响应 ,为设计人员提供直观的设计依据。对曲线箱梁和异形箱梁受力特性有了更一步的理解 ,并提出了新的见解 相似文献
16.
利用AVL公司开发的BOOST软件可宏观地描述发动机的热力学过程且优化发动机的性能,而AVL的CRUISE软件可调用BOOST建立的发动机模型.在进行道路循环工况的仿真时,须对发动机全部工况点进行准确的标定.文中采用BOOST开发了发动机的仿真模型.通过调整节气门开度和燃烧模型参数,标定了发动机在多个转速和负荷点的转矩、功率和油耗,较好地模拟了发动机的动力性和经济性.最后基于ECE循环工况,将此模型与CRUISE进行联合仿真,分析了发动机瞬态工况的动力性、油耗和NO_x排放等参数. 相似文献
17.
混凝土的推广使用已有一个世纪,目前在现代工程建设中仍占有重要的地位。而在今天,混凝土的裂缝较为普遍,在桥梁工程中裂缝几乎无所不在,尽管我们在施工中采取各种各样的措施,但收效甚微,裂缝仍然时有出现。该文指出,究其原因,人们对混凝土温度变化所产生的应力注意不够是其中之一,尤其是大体积混凝土。对此,温度应力与温度控制具有重要的意义。 相似文献
18.
针对互通式立交出口可能出现的多种情况,结合工程实践,探讨其设计技术问题,提出设计思路及技术对策,并在技术分析中强调融入“安全至上”“动态设计”“灵活性设计”“宽容性设计”等设计新理念,使出口设计安全、合理. 相似文献
19.
J. R. Serrano F. J. Arnau V. Dolz A. Tiseira M. Lejeune N. Auffret 《International Journal of Automotive Technology》2008,9(3):277-288
This article presents a two-stage turbocharged heavy-duty diesel (HDD) engine designed to fulfil the US2007 anti-pollution
directive. This directive imposes very restrictive limits on the NOx and particle emissions of HDD engines. In this work,
the possibility of combining particle traps in the exhaust line to reduce soot emissions with very high EGR rates to reduce
NOx emissions is considered. This new generation engine implements two-stage turbocharging in order to improve the bsfc when
the engine is working on steady conditions as well as to optimize the engine transient response. After carrying out the tests,
the results were analyzed and the engine settings were adjusted to maximise its behaviour and minimise pollutant emissions.
NOx and soot emission peaks were also analyzed at engine transient conditions in order to keep them under certain levels,
and thus maintain the overall pollutant emissions to a level that is as low as possible. In summary, a double-stage turbocharging
configuration can greatly improve engine driveability (between 23% and 36% depending on engine speed), while reducing NOx
emissions during transient evolution without increasing opacity peaks beyond the stated limits. 相似文献
20.
水泥混凝土安全护栏 总被引:1,自引:0,他引:1
赵文光 《筑路机械与施工机械化》1994,11(2):9-14
通过水泥混凝土安全护栏在道路交通中的实际应用,对其结构形式和主要参数以及具体的施工方法进行了较为详实的叙述,并对比介绍了水泥混凝土安全护栏的使用效果。 相似文献