Maneuvers of motorcycles in queues at signalized intersections

The maneuvering models of motorcycles in previous studies often considered motorcycles' traveling in terms of movements in a physical static lane and not in terms of dynamic virtual lane‐based movements. For that reason, these models are not able to imitate motorcyclists' behavior well. This paper proposes a maneuverability model framework for motorcycles in queues at signalized intersections with considering the dynamic motorcycle's lane. The model includes (i) a dynamic motorcycle's lane to identify the current, left, and right lanes of the subject motorcycle, (ii) a threshold distance to determine when a motorcyclist starts to consider maneuvering, (iii) a lane selection model to identify the lane preferred by a motorcyclist, and (iv) a gap acceptance model to describe whether or not the lead and lag gaps are acceptable for maneuvering. The model framework captures the variation across the motorcyclist population and over time observations. The models were applied to Hanoi and Hochiminh city, Vietnam, based on microscopic data collected from video images. All of the parameters were estimated using the maximum likelihood method with the statistical estimation software GAUSS. The results show that 77.88% of the observed maneuvers – either staying in the current lane or turning left or right – could be modeled correctly by the proposed models. Copyright © 2010 John Wiley & Sons, Ltd.     

Traffic conflict models to evaluate the safety of signalized intersections at the cycle level

The safety of signalized intersections has often been evaluated at an aggregate level relating collisions to annual traffic volume and the geometric characteristics of the intersection. However, for many safety issues, it is essential to understand how changes in traffic parameters and signal control affect safety at the signal cycle level. This paper develops conflict-based safety performance functions (SPFs) for signalized intersections at the signal cycle level. Traffic video-data was recorded for six signalized intersections located in two cities in Canada. A video analysis procedure is proposed to collect rear-end conflicts and various traffic variables at each signal cycle from the recorded videos. The traffic variables include: traffic volume, maximum queue length, shock wave characteristics (e.g. shock wave speed and shock wave area), and the platoon ratio. The SPFs are developed using the generalized linear models (GLM) approach. The results show that all models have good fit and almost all the explanatory variables are statistically significant leading to better prediction of conflict occurrence beyond what can be expected from the traffic volume only. Furthermore, space-time conflict heat maps are developed to investigate the distribution of the traffic conflicts. The heat maps illustrate graphically the association between rear-end conflicts and various traffic parameters. The developed models can give insight about how changes in the signal cycle design affect the safety of signalized intersections. The overall goal is to use the developed models for the real-time optimization of signalized intersection safety by changing the signal design.     

Traffic performance of shared lanes at signalized intersections based on cellular automata modeling

Shared lanes at signalized intersections are designed for use by vehicles of different movement directions. Shared lane usage increases the flexibility of assigning lane grouping to accommodate variable traffic volume by direction. However, a shared lane is not always beneficial as it can at time result in blockage that leads to both capacity and safety constraints. This paper establishes a cellular automata model to simulate traffic movements at signalized intersections with shared lanes. Several simulation experiments are carried out both for a single shared lane and for an approach with a shared lane. Simulation of a single shared lane used by straight‐through and right‐turn (as similar to left‐turn in the USA) vehicles suggests that the largest travel delay occurs when traffic volumes (vehicles/lane) of the two movement streams along the shared lane are at about the same level. For a trial lane‐group with a shared lane, when traffic volumes of the two movement streams are quite different, the shared lane usage is not efficient in terms of reduction in traffic delay. The simulation results are able to produce the threshold traffic volume to arrange a shared lane along an approach. Copyright © 2013 John Wiley & Sons, Ltd.     

Modeling traffic operation at signalized intersections without explicit left‐turn yielding rules with an enhanced cell transmission model

This paper presents an enhanced cell transmission model (CTM) to capture traffic operation at signalized intersections without explicit permissive left‐turn yielding rules (i.e. aggressive permissive left‐turn maneuvers may not necessarily yield to opposing through traffic), which can be widely observed in many developing countries. Different from previous studies that focus on traffic dynamics on approaching links, this study contributes to modeling traffic operations within the intersection. A novel cell transmission framework with various types of virtual cells is proposed to model the dynamics of traffic movements from approach to exit. The unique phenomenon of competitive occupying of the conflict point between the left turn and opposing through movements is modeled. The cell state indicating its blockage is proposed to capture the dynamic queue formulation and dissipation and to evaluate the operational traffic performance at the intersection. Field validation results show that the proposed model can capture the operation of traffic at signalized intersections without explicit permissive left‐turn yielding rules with significantly higher level of accuracy than traditional traffic flow models. Copyright © 2016 John Wiley & Sons, Ltd.     

An exact modelling of the uniform control traffic delay in undersaturated signalized intersections

The average delay experienced by vehicles at a signalized intersection defines the level of service (LOS) at which the intersection operates. A major challenge in this regard is the ability to accurately estimate all the components underlying the overall control delay, including the uniform, incremental and initial queue delays. This paper tackles this challenging task by proposing a novel exact model of the uniform control delay component with a view to enhancing the accuracy of the existing approximate models, notably, the one reported in the Highway Capacity Manual 2010. Both graphical and analytical proofs are employed to derive exact closed‐form expressions for the uniform control delay at undersaturated signalized intersections. The high degree of accuracy of the proposed models is analysed through extensive simulations to demonstrate their abilities to exactly characterize the performance of real‐life intersections in terms of the resulting vehicle delay. Unlike the existing widely adopted uniform delay models, which tend to overestimate the LOS of real‐life intersections, the delay models introduced in this paper have the merit of exactly capturing such a LOS. Copyright © 2016 John Wiley & Sons, Ltd.     

Application of traffic microsimulation for evaluating safety performance of urban signalized intersections

The primary objective of this paper is to provide a statistical relationship between traffic conflicts estimated from microsimulation and observed crashes in order to evaluate safety performance, in particular the effect of countermeasures. A secondary objective is to assess the effect of conflict risk tolerance and number of simulation runs on the estimates of countermeasure effects so obtained. Conflicts were simulated for a sample of signalized intersections from Toronto, Canada, using VISSIM microscopic traffic simulation and several crash–conflict relationships were obtained. A separate sample of treated intersections from Toronto was used to compare countermeasure effects from the integrated crash–conflict expression to a conventional, but rigorous crash-based Empirical Bayes before-and-after analysis that was already done, with the results published, for the same sites and treatment. The countermeasure considered for this investigation involved changing the left turn signal operation for the treated intersection sample from permissive to protected-permissive. The results support the view that countermeasure effects can be estimated reliably from conflicts derived from microsimulation, and more so when a suitable number of simulation runs and conflict tolerance thresholds are used in the crash–conflict relationship.     

Severity of pedestrian injuries due to traffic crashes at signalized intersections in Hong Kong: a Bayesian spatial logit model

The present study intended to (1) investigate the injury risk of pedestrian casualties involved in traffic crashes at signalized intersections in Hong Kong; (2) determine the effect of pedestrian volumes on the severity levels of pedestrian injuries; and (3) explore the role of spatial correlation in econometric crash‐severity models. The data from 1889 pedestrian‐related crashes at 318 signalized intersections between 2008 and 2012 were elaborately collected from the Traffic Accident Database System maintained by the Hong Kong Transport Department. To account for the cross‐intersection heterogeneity, a Bayesian hierarchical logit model with uncorrelated and spatially correlated random effects was developed. An intrinsic conditional autoregressive prior was specified for the spatial correlation term. Results revealed that (1) signalized intersections with greater pedestrian volumes generally exhibited a lower injury risk; (2) ignoring the spatial correlation potentially results in reduced model goodness‐of‐fit, an underestimation of variability and standard error of parameter estimates, as well as inconsistent, biased, and erroneous inference; (3) special attention should be paid to the following factors, which led to a significantly higher probability of pedestrians being killed or sustaining severe injury: pedestrian age greater than 65 years, casualties with head injuries, crashes that occurred on footpaths that were not obstructed/overcrowded, heedless or inattentive crossing, crashes on the two‐way carriageway, and those that occurred near tram or light‐rail transit stops. Copyright © 2017 John Wiley & Sons, Ltd.     

A comparison between PARAMICS and VISSIM in estimating automated field‐measured traffic conflicts at signalized intersections

The main objective of this study is to investigate the relationship between field‐measured conflicts and simulated conflicts estimated from microsimulation model (PARAMICS) using the surrogate safety assessment model. An urban signalized intersection was selected for analysis. Automated video‐based computer vision techniques were used to identify field conflicts. The applicability of a two‐step model calibration procedure applied to VISSIM in a recent study was investigated using PARAMICS. In the first calibration step, the PARAMICS model was calibrated to ensure that the simulation gives reasonable results of average delay times. The second calibration step used a genetic algorithm procedure to calibrate PARAMICS parameters to enhance the correlation between simulated and field‐measured conflicts. Finally, the results obtained from PARAMICS were compared with results obtained from VISSIM. The comparison included three aspects: (i) the car‐following model and safety‐related parameters; (ii) the correlation between simulated and field‐measured conflicts; and (iii) the conflict spatial distributions. The results show that the default simulation model parameters give poor correlation with the field‐measured data, and therefore, using simulation models without a proper calibration should be avoided. Overall, good correlation between field‐measured and simulated conflicts was obtained after calibration for both models, especially at higher time‐to‐collision (TTC) values. At TTC threshold of 1.5 s, PARAMICS overestimates the number of conflicts and VISSIM underestimates it. Both models overestimated the number of conflicts at TTC threshold of 3.00 s. There were major differences between field‐measured and simulated conflicts spatial distributions for both simulation models. This indicates that despite the good correlation obtained from the calibration process, both PARAMICS and VISSIM do not capture the actual conflict occurrence mechanism. Copyright © 2016 John Wiley & Sons, Ltd.     

Operational analysis of the contraflow left-turn lane design at signalized intersections in China

The primary objective of the study was to evaluate the impacts of an unconventional left-turn treatment called contraflow left-turn lane (CLL) on the operational performance of left-turn movement at signalized intersections. An analytical model was developed for estimating the capacity of left-turn movement at signalized intersections with the CLL design. The capacity model was calibrated and validated using field data collected at six approaches at five signalized intersections in the city of Handan, China. The results of field data analyses showed that the use of CLL design improved the capacity of left-turn movements. However, the capacity gains with the CLL design were quite stochastic considering the randomness in the arrivals of left-turning vehicles. Analytical delay models were proposed for estimating the delay to left-turning vehicles at intersections with the CLL design. A procedure was also proposed for optimizing the location of the upstream median opening and the green interval of the pre-signal. Simulation analyses were conducted to compare the delay experienced by the left-turning and through vehicles at signalized intersections with the conventional left-turn lane, the CLL and another unconventional left-turn treatment entitled “tandem design”. The results showed that both CLL and tandem designs outperformed conventional left-turn lane design; and the CLL design generated less delay to both the left-turning and through vehicles as compared with the tandem design.     

Real time queue length estimation for signalized intersections using travel times from mobile sensors

We study how to estimate real time queue lengths at signalized intersections using intersection travel times collected from mobile traffic sensors. The estimation is based on the observation that critical pattern changes of intersection travel times or delays, such as the discontinuities (i.e., sudden and dramatic increases in travel times) and non-smoothness (i.e., changes of slopes of travel times), indicate signal timing or queue length changes. By detecting these critical points in intersection travel times or delays, the real time queue length can be re-constructed. We first introduce the concept of Queue Rear No-delay Arrival Time which is related to the non-smoothness of queuing delay patterns and queue length changes. We then show how measured intersection travel times from mobile sensors can be processed to generate sample vehicle queuing delays. Under the uniform arrival assumption, the queuing delays reduce linearly within a cycle. The delay pattern can be estimated by a linear fitting method using sample queuing delays. Queue Rear No-delay Arrival Time can then be obtained from the delay pattern, and be used to estimate the maximum and minimum queue lengths of a cycle, based on which the real-time queue length curve can also be constructed. The model and algorithm are tested in a field experiment and in simulation.     

Special provisions for left turns at signalized intersections to increase capacity and safety

Heavy left-turns at intersections are not only difficult to accommodate but also often cause traffic accidents. Such problem can be reduced by adopting an exclusive left-turn signal phase, but in this case the cycle length needs to be extended and the overall intersection capacity reduced. This problem is particularly important in such countries as Korea where unprotected left turns are rarely used. Innovative intersection designs and operational methods for avoiding these problems are presented and their effects of increasing capacity and reducing vehicle delay are analyzed. They rule out the requirement for exclusive left-turn phase while accommodating a large volume of left-turns quite safely.     

Real-time estimation of turning movement counts at signalized intersections using signal phase information

A variety of sensor technologies, such as loop detectors, traffic cameras, and radar have been developed for real-time traffic monitoring at intersections most of which are limited to providing link traffic information with few being capable of detecting turning movements. Accurate real-time information on turning movement counts at signalized intersections is a critical requirement for applications such as adaptive traffic signal control. Several attempts have been made in the past to develop algorithms for inferring turning movements at intersections from entry and exit counts; however, the estimation quality of these algorithms varies considerably. This paper introduces a method to improve accuracy and robustness of turning movement estimation at signalized intersections. The new algorithm makes use of signal phase status to minimize the underlying estimation ambiguity. A case study was conducted based on turning movement data obtained from a four-leg signalized intersection to evaluate the performance of the proposed method and compare it with two other existing well-known estimation methods. The results show that the algorithm is accurate, robust and fairly straightforward for real world implementation.     

Exploration of correlation between environmental factors and mobility at signalized intersections

Characterizing the relationship between environmental factors and mobility is critical for developing a sustainable traffic signal control system. In this study, the authors investigate the correlation of the environmental impacts of transport and mobility measurements at signalized intersections. A metamodeling-based method involving experimental design, simulations, and regression analysis was developed. The simulations, involving microscopic traffic modeling and emission estimation with an emerging emission estimator, provide the flexibility of generating cases with various intersection types, vehicle types, and other parameters such as driver behavior, fuel types, and meteorological factors. A multivariate multiple linear regression (MMLR) analysis was applied to determine the relationship between environmental and mobility measurements. Given the limitations of using the built-in emissions modules within current traffic simulation and signal optimization tools, the metamodeling-based approach presented in this paper makes a methodological contribution. The findings of this study set up the base for extensive application of simulation optimization to sustainable traffic operations and management. Moreover, the comparison of outputs from an advanced estimator with those from the current tool recommend improving the emissions module for more accurate analysis (e.g., benefit-cost analysis) in practical signal retiming projects.     

Testbed for evaluation of vehicular detection systems

Reliable and robust detection systems are the cornerstone in the efficient and proper functioning of vehicle infrastructure integration. This paper presents the design and implementation of a testbed for evaluating vehicular detection systems. The development of the testbed involved design of the hardware setup required for real‐time monitoring of the sensors, programming the devices for data capture, and development of algorithms to automate the analysis of the recorded data. The methodology used to calibrate and validate the algorithms to automate the analysis of the data is presented as well. Although the testbed is presented in the context of evaluation of video detection systems at signalized intersections, it can be used for evaluating any vehicular detection systems. Copyright © 2010 John Wiley & Sons, Ltd.     

A measurement to driving situation awareness in signalized intersections

Drivers get involved easily in Left-Turn Across Path with Opposite Direction Traffic (LTAP-OD) conflicts at signalized intersection with unprotected left-turn phasing. This study classified the left-turn drivers’ performance into four types: (1) the correct acceptance of safe lags/gaps, (2) the correct rejection of dangerous lags/gaps, (3) the false rejection of safe lags/gaps and (4) the false acceptance of dangerous lags/gaps. Based on the high mounted video camera data, the logistic regression model was used to obtain the critical gaps for estimating whether the lags/gaps were safe or not. The results show that the cognition behavior of the left-turn drivers should be improved while the gap/lag is drawn near the critical gap. Furthermore, the conservative drivers are more likely to reject the larger lags/gaps and yield the right-of-way to the opposing vehicles. Simultaneously the poor response execution may cause drivers to have difficulties during the turning performance when the lags/gaps are large enough. These results could be used as the basis for a discussion of the right time to support the drivers.     

Increasing the capacity of signalized intersections by allocating exit lanes to turning movements

Unconventional intersection designs have been used to increase the capacity of intersections that are over‐saturated under conventional ones. However, existing unconventional designs typically require extra land space and their effectiveness often depends on drivers' familiarity with the uncommon operating rules. To overcome these challenges, we propose a new unconventional design, where movements that are mutually incompatible under the conventional design can be made compatible of each other by allocating exit lanes to them appropriately, thereby creating opportunities for capacity improvement. We develop a lane‐based capacity optimization model that incorporates the allocation of exit lanes as decision variables. The model is formulated as a Binary Mixed Integer Linear Programming problem, which can be efficiently solved by standard branch‐and‐bound algorithms. Numerical experiments show that significant capacity improvement can be obtained under our design. Besides proposing a new unconventional design, we also contribute to the literature of lane‐based signal optimization methods by providing a novel linear formulation for the latest, yet nonlinear, model described in Wong and Heydecker [Transportation Research Part B 45(4):667–681]. This improvement is methodologically beneficial as linear models are computationally more convenient than nonlinear ones. Copyright © 2017 John Wiley & Sons, Ltd.     

Development of a delay model for unsignalized intersections applicable to traffic assignment

Abstract

This paper develops a model for estimating unsignalized intersection delays which can be applied to traffic assignment (TA) models. Current unsignalized intersection delay models have been developed mostly for operational purposes, and demand detailed geometric data and complicated procedures to estimate delay. These difficulties result in unsignalized intersection delays being ignored or assumed as a constant in TA models.

Video and vehicle license plate number recognition methods are used to collect traffic volume data and to measure delays during peak and off-peak traffic periods at four unsignalized intersections in the city of Tehran, Iran. Data on geometric design elements are measured through field surveys. An empirical approach is used to develop a delay model as a function of influencing factors based on 5- and 15-min time intervals. The proposed model estimates delays on each approach based on total traffic volumes, rights-of-way of the subject approach and the intersection friction factor. The effect of conflicting traffic flows is considered implicitly by using the intersection friction factor. As a result, the developed delay model guarantees the convergence of TA solution methods.

A comparison between delay models performed using different time intervals shows that the coefficients of determination, R ², increases from 43.2% to 63.1% as the time interval increases from 5- to 15-min. The US Highway Capacity Manual (HCM) delay model (which is widely used in Iran) is validated using the field data and it is found that it overestimates delay, especially in the high delay ranges.     

Optimality versus run time for isolated signalized intersections

Simulation-based optimization of traffic signal timing has become pervasive and popular, in the field of traffic engineering. When the underlying simulation model is well-trusted and/or well-calibrated, it is only natural that typical engineers would want their signal timing optimized using the judgment of that same model. As such, it becomes important that the heuristic search methods typically used by these optimizations are capable of locating global optimum solutions, for a wide range of signal systems. However off-line and real-time solutions alike offer just a subset of the available search methods. The result is that many optimizations are likely converging prematurely on mediocre solutions. In response, this paper compares several search methods from the literature, in terms of both optimality (i.e., solution quality) and computer run times. Simulated annealing and genetic algorithm methods were equally effective in achieving near-global optimum solutions. Two selection methods (roulette wheel and tournament), commonly used within genetic algorithms, exhibited similar effectiveness. Tabu searching did not provide significant benefits. Trajectories of optimality versus run time (OVERT) were similar for each method, except some methods aborted early along the same trajectory. Hill-climbing searches always aborted early, even with a large number of step-sizes. Other methods only aborted early when applied with ineffective parameter settings (e.g. mutation rate, annealing schedule). These findings imply (1) today’s products encourage a sub-optimal “one size fits all” approach, (2) heuristic search methods and parameters should be carefully selected based on the system being optimized, (3) weaker searches abort early along the OVERT curve, and (4) improper choice of methods and/or parameters can reduce optimization benefits by 22–33%.     

A probabilistic approach to calculate capacity of signalized intersections with a red light camera

In recent years, red light cameras (RLCs) have been installed at many signalized intersections. The main reason behind installing RLCs is to reduce intersection‐related accidents caused because of a driver's behavior to cross the intersection when the signal turns red. By nature, if the driver is aware of the presence of RLC his or her driving behavior is bound to change. This behavioral change, however, may be intentional or unintentional. This may influence the utilization of yellow intervals resulting in a possible increase in dilemma zone, which in turn, may reduce the service capacity of the intersection. To accurately capture this capacity reduction, we present a probabilistic approach to modify the saturation flow rate formula in the Highway Capacity Manual that is currently used to calculate the capacity of signalized intersections. We introduce a new factor in the saturation flow rate calculation called red light reduction factor, to account for the capacity reduction owing to RLCs. Using field data from Baltimore, Maryland, we establish a relationship for the red light reduction factor. We then show that capacity of RLC‐equipped intersections is generally lower than that without RLCs. Although the percentage reduction in capacity of a single intersection may not seem significant, the cumulative impact of such reduction in a heavily traveled road network may be quite significant, resulting in significant loss in travel time. In future works, the systemwide capacity reduction owing to the presence of RLCs can be studied in congested transportation networks. Copyright © 2012 John Wiley & Sons, Ltd.