Active front wheel steering model and controller for integrated dynamics control systems

We report a model and controller for an active front-wheel steering (AFS) system. Two integrated dynamics control (IDC) systems are designed to investigate the performance of the AFS system when integrated with braking and steering systems. An 8-degrees-of-freedom vehicle model was employed to test the controllers. The controllers were inspected and compared under different driving and road conditions, with and without braking input, and with and without steering input. The results show that the AFS system performs kinematic steering assistance function and kinematic stabilisation function very well. Three controllers allowed the yaw rate to accurately follow a reference yaw rate, improving the lateral stability. The two IDC systems improved the lateral stability and vehicle control and were effective in reducing the sideslip angle.     

Modeling and control of an anti-lock brake and steering system for cooperative control on split-mu surfaces

The brake and steering systems in vehicles are the most effective actuators that directly affect the vehicle dynamics. In general, the brake system affects the longitudinal dynamics and the steering system affects the lateral dynamics; however, their effects are coupled when the vehicle is braking on a non-homogenous surface, such as a split-mu road. The yaw moment compensation of the steering control on a split-mu road is one of the basic functions of integrated or coordinated chassis control systems and has been demonstrated by several chassis suppliers. However, the disturbance yaw moment is generally compensated for using the yaw rate feedback or using wheel brake pressure measurement. Access to the wheel brake pressure through physical sensors is not cost effective; therefore, we modeled the hydraulic brake system to avoid using physical sensors and to estimate the brake pressure. The steering angle controller was designed to mitigate the non-symmetric braking force effect and to stabilize the yaw rate dynamics of the vehicle. An H-infinity design synthesis was used to take the system model and the estimation errors into account, and the designed controller was evaluated using vehicle tests.     

An adaptive integrated algorithm for active front steering and direct yaw moment control based on direct Lyapunov method

In this article, an adaptive integrated control algorithm based on active front steering and direct yaw moment control using direct Lyapunov method is proposed. Variation of cornering stiffness is considered through adaptation laws in the algorithm to ensure robustness of the integrated controller. A simple two degrees of freedom (DOF) vehicle model is used to develop the control algorithm. To evaluate the control algorithm developed here, a nonlinear eight-DOF vehicle model along with a combined-slip tyre model and a single-point preview driver model are used. Control commands are executed through correction steering angle on front wheels and braking torque applied on one of the four wheels. Simulation of a double lane change manoeuvre using Matlab^®/Simulink is used for evaluation of the control algorithm. Simulation results show that the integrated control algorithm can significantly enhance vehicle stability during emergency evasive manoeuvres on various road conditions ranging from dry asphalt to very slippery packed snow road surfaces.     

用于电子稳定程序的汽车模型和控制策略

电子稳定程序(ElectronicStabilityProgram)是行驶车辆的一种主动安全系统,它综合了制动防抱死系统,驱动力控制系统和横摆力矩控制系统,使行驶车辆的安全性得到很大的提高。本文首先建立用于电子稳定程序的汽车模型,包括车身模型、悬架模型、转向模型、轮胎模型、制动系统模型、发动机模型和传动系模型。然后建立了主动横摆控制的控制逻辑,通过加入制动防抱死系统和牵引力控制系统,构成了电子稳定程序的控制逻辑。最后对移线运动、紧急转向、制动转向、驱动转向4个典型的工况进行仿真,从而验证了电子稳定程序控制逻辑的正确性。     

Integrated Control of Active Rear Wheel Steering and Direct Yaw Moment Control

An integrated control system of active rear wheel steering (4WS) and direct yaw moment control (DYC) is presented in this paper. Because of the tire nonlinearity that is mainly due to the saturation of cornering forces, vehicle handling performance is improved but limited to a certain extent only by steering control. Direct yaw moment control using braking and/or driving forces is effective not only in linear but also nonlinear ranges of tire friction circle. The proposed control system is a model matching controller which makes the vehicle follow the desired dynamic model by the state feedback of both yaw rate and side slip angle. Various computer simulations are carried out and show that vehicle handling performance is much improved by the integrated control system.     

Integrated Control of Active Rear Wheel Steering and Direct Yaw Moment Control

SUMMARY

An integrated control system of active rear wheel steering (4WS) and direct yaw moment control (DYC) is presented in this paper. Because of the tire nonlinearity that is mainly due to the saturation of cornering forces, vehicle handling performance is improved but limited to a certain extent only by steering control. Direct yaw moment control using braking and/or driving forces is effective not only in linear but also nonlinear ranges of tire friction circle. The proposed control system is a model matching controller which makes the vehicle follow the desired dynamic model by the state feedback of both yaw rate and side slip angle. Various computer simulations are carried out and show that vehicle handling performance is much improved by the integrated control system.     

Risk management algorithm for rear-side collision avoidance using a combined steering torque overlay and differential braking

This paper describes a risk management algorithm for rear-side collision avoidance. The proposed risk management algorithm consists of a supervisor and a coordinator. The supervisor is designed to monitor collision risks between the subject vehicle and approaching vehicle in the adjacent lane. An appropriate criterion of intervention, which satisfies high acceptance to drivers through the consideration of a realistic traffic, has been determined based on the analysis of the kinematics of the vehicles in longitudinal and lateral directions. In order to assist the driver actively and increase driver's safety, a coordinator is designed to combine lateral control using a steering torque overlay by motor-driven power steering and differential braking by vehicle stability control. In order to prevent the collision while limiting actuator's control inputs and vehicle dynamics to safe values for the assurance of the driver's comfort, the Lyapunov theory and linear matrix inequalities based optimisation methods have been used. The proposed risk management algorithm has been evaluated via simulation using CarSim and MATLAB/Simulink.     

Real-time implementation of a traction control algorithm on a scaled roller rig

Traction control is a very important aspect in railway vehicle dynamics. Its optimisation allows improvement of the performance of a locomotive by working close to the limit of adhesion. On the other hand, in case the adhesion limit is surpassed, the wheels are subjected to heavy wear and there is also a big risk that vibrations in the traction occur. Similar considerations can be made in the case of braking. The development and optimisation of a traction/braking control algorithm is a complex activity, because it is usually performed on a real vehicle on the track, where many uncertainties are present due to environmental conditions and vehicle characteristics. This work shows the use of a scaled roller rig to develop and optimise a traction control algorithm on a single wheelset. Measurements performed on the wheelset are used to estimate the optimal adhesion forces by means of a wheel/rail contact algorithm executed in real time. This allows application of the optimal adhesion force.     

对开路面弯道制动ABS控制策略研究

在对开路面弯道制动工况下分析了轮胎受力情况,提出一种基于转角预测前馈、路径偏移量反馈的车辆最佳滑移率动态调节方法,在SIMPACK中建立汽车多体模型,在MATLAB/Simulink中搭建控制系统,并进行了虚拟在环试验。试验结果显示,与传统ABS相比,所提出的控制方法可以显著改善车辆的侧偏位移、横摆角速度以及制动时方向的稳定性,保证了制动效能,使车辆侧向稳定性得到显著提高。     

汽车底盘控制技术的现状和发展趋势

电子控制系统在汽车底盘技术中的广泛应用极大地改善了汽车的主动安全性。常见的底盘控制系统可分为制动控制、牵引控制、转向控制和悬挂控制。介绍通过高速网络将各控制系统联成一体形成的全方位底盘控制(GCC),汽车开放性系统构架工程(AUTOSAR)和底盘的线控技术(X-by-w ire)。     

Vehicle dynamics control by using a three-dimensional stabilizer pendulum system

Active safety systems of a vehicle normally work well on tyre–road interactions, however, these systems deteriorate in performance on low-friction road conditions. To combat this effect, an innovative idea for the yaw moment and roll dynamic control is presented in this paper. This idea was inspired by the chase and run dynamics animals like cheetahs in the nature; cheetahs have the ability to swerve while running at very high speeds. A cheetah controls its dynamics by rotating its long tail. A three-dimensional stabilizer pendulum system (3D-SPS) resembles the rotational motion of the tail of a cheetah to improve the stability and safety of a vehicle. The idea has been developed in a stand-alone 3D stabilizer pendulum system as well as in an integrated control system, which consists of an ordinary differential braking direct yaw control (DYC) and active steering control that is assisted by the 3D-SPS. The performance of the proposed 3D-SPS has been evaluated over a wide range of handling manoeuvres by using a comprehensive numerical simulation. The results show the advantage of 3D-SPS over conventional control approaches, which are ineffective on low-friction road conditions and high lateral acceleration manoeuvres. It should however be noted that the best vehicle dynamics performance is obtained when an integrated 3D-SPS and DYC and AFS is utilised.     

Handling stability improvement through robust active front steering and active differential control

The design of the integrated active front steering and active differential control for handling improvement of road vehicles is undertaken. The controller design algorithm is based on the solution of a set of linear matrix inequalities that guarantee robustness against a number of vehicle parameters such as speed, cornering and braking stiffnesses. Vehicle plane dynamics are first expressed in the generic linear parameter-varying form, where the above-stated parameters are treated as interval uncertainties. Then, static-state feedback controllers ensuring robust performance against changing road conditions are designed. In a first series of simulations, the performance of the integrated controller is evaluated for a fishhook manoeuvre for different values of road adhesion coefficient. Then, the controller is tested for an emergency braking manoeuvre executed on a split-μ road. In all cases, it is shown that static-state feedback controllers designed by the proposed method can achieve remarkable road handling performance compared with uncontrolled vehicles.     

Nonlinear optimal integrated vehicle control using individual braking torque and steering angle with on-line control allocation by using state-dependent Riccati equation technique

This paper proposes the solution of state-dependent Riccati equation as a nonlinear optimal regulator to stabilise the motion dynamics of the vehicle model subjected to sudden disturbance inputs in the lateral direction. The proposed nonlinear regulator coordinates individually actuated wheel braking torque and steering wheel angle simultaneously in an optimal manner. Performance criteria are satisfied by solving the Riccati equation based on the given cost function subjected to the nonlinear vehicle dynamics. On-line control allocation in terms of optimal brake torque distribution enhanced by optimal wheel steering angle input is achieved. Furthermore, the proposed optimal nonlinear regulator is an active fault-tolerant control system against partial by-wire actuator failures while guaranteeing stability with good performance due to its capability to allocate the individual control inputs in an optimal way. The main aim is to stabilise the motion dynamics of the vehicle model during short-term emergency situations along the desired straight trajectory manageable by average drivers and to provide vehicle stability and handling predictability through the interaction of individual wheel braking and steering actuators. Simulation results are used to illustrate the effectiveness of the proposed methodology.     

基于混杂理论的电磁与摩擦集成制动方法

鉴于传统电子液压制动系统连续制动易产生"热衰退"现象，结构缺陷导致的制动响应慢，制动系统与电控系统衔接差等缺点，提出了一种基于混杂自动机模型的电磁与摩擦集成制动方法。首先分析集成制动器制动时的工作特点以及不同情况下对应的工作模式（纯电磁制动、纯摩擦制动以及集成制动），并确定3种制动模式的切换条件，通过逻辑门限算法将其实现。根据制动时车辆既具有连续运动状态又有离散状态的混杂特性，使用MATLAB/Stateflow建立基于制动模式切换系统的推广自动机模型，并根据制动模式切换控制策略，对3种制动模式切换进行试验，验证制动模式切换控制策略的合理性。最后选取车辆制动初速度为28 m·s^-1的直线制动工况，分别在高附着系数（0.85）以及低附着系数（0.3）的路面条件下，通过试验平台对控制算法和制动系统性能进行试验验证。研究结果表明：所提出的汽车混杂理论模型以及优化方法在在低附着系数（0.3）路面条件下，集成制动方法较传统液压制动系统缩短5.12%的制动距离，缩短制动时间0.3 s；在高附着系数（0.85）路面条件下，集成制动方法较传统液压制动系统缩短5.66%的制动距离，缩短制动时间0.2 s，能有效提高制动效能。     

基于模糊解耦控制的车辆转向制动系统研究

车辆转向系统和制动系统之间存在着很强的速度耦合关系,造成两个系统之间的性能相互影响,使得车辆在转向制动这一工况成了汽车最危险的工况之一。本文结合实际车辆参数建立转向系统的二自由度模型和制动系统的单车轮模型,针对车辆转向制动工况设计了模糊解耦控制器,实现了车辆的转向与制动同时控制。经验证含有模糊解耦控制的车辆转向制动系统具有很好的动态控制效果,并且有很强的鲁棒性和自适应性。     

Energy and wear optimisation of train longitudinal dynamics and of traction and braking systems

Traction and braking systems deeply affect longitudinal train dynamics, especially when an extensive blending phase among different pneumatic, electric and magnetic devices is required. The energy and wear optimisation of longitudinal vehicle dynamics has a crucial economic impact and involves several engineering problems such as wear of braking friction components, energy efficiency, thermal load on components, level of safety under degraded or adhesion conditions (often constrained by the current regulation in force on signalling or other safety-related subsystem). In fact, the application of energy storage systems can lead to an efficiency improvement of at least 10% while, as regards the wear reduction, the improvement due to distributed traction systems and to optimised traction devices can be quantified in about 50%. In this work, an innovative integrated procedure is proposed by the authors to optimise longitudinal train dynamics and traction and braking manoeuvres in terms of both energy and wear. The new approach has been applied to existing test cases and validated with experimental data provided by Breda and, for some components and their homologation process, the results of experimental activities derive from cooperation performed with relevant industrial partners such as Trenitalia and Italcertifer. In particular, simulation results are referred to the simulation tests performed on a high-speed train (Ansaldo Breda Emu V250) and on a tram (Ansaldo Breda Sirio Tram). The proposed approach is based on a modular simulation platform in which the sub-models corresponding to different subsystems can be easily customised, depending on the considered application, on the availability of technical data and on the homologation process of different components.     

Trends in vehicle motion control for automated driving on public roads

ABSTRACT

In this paper, we describe how vehicle systems and the vehicle motion control are affected by automated driving on public roads. We describe the redundancy needed for a road vehicle to meet certain safety goals. The concept of system safety as well as system solutions to fault tolerant actuation of steering and braking and the associated fault tolerant power supply is described. Notably restriction of the operational domain in case of reduced capability of the driving automation system is discussed. Further we consider path tracking, state estimation of vehicle motion control required for automated driving as well as an example of a minimum risk manoeuver and redundant steering by means of differential braking. The steering by differential braking could offer heterogeneous or dissimilar redundancy that complements the redundancy of described fault tolerant steering systems for driving automation equipped vehicles. Finally, the important topic of verification of driving automation systems is addressed.     

变路面车辆稳定性控制策略研究

建立了某四轮汽车9自由度车辆模型和轮胎动力模型,并提出了一种基于侧向力利用系数的差动制动、主动转向切换控制策略。模拟了汽车以车速24.5m/s行驶时的一个紧急避让情况,研究了无控制模式、差动制动控制模式、联合控制模式下的车辆横摆角速度、质心侧偏角、质心侧向位移的变化。结果表明,所提出的差动制动联合主动转向技术的控制策略可以满足变路面下车辆稳定性控制要求。     

A Comparative Study of Four Wheel Steering Models Using the Inverse Solution

An inverse solution study of various four wheel steering models is carried out for the purpose of comparison of steering/braking input needed to track a lane change maneuver. Optimal control is used to solve the non-linear inverse problem. Comparisons are made when the vehicle is coasting, when the time required to track the trajectory is minimized with appropriate utilization of brake/traction forces, and in a front wheel lock situation. A rear steering model which produces neutral steering characteristics displayed the best steering behavior with respect to ease of steering.     

Fault-tolerant braking control with integerated EMBs and regenerative in-wheel motors

This paper presents a fault-tolerant brake torque controller for four-wheel-distributed braking systems with in-wheel motors and Electro-Mechanical Brakes (EMB). Mechanical and electrical faults can degrade the performance of the EMB actuators and, thus, their effects need to be compensated in vehicle dynamics level. In this study, the faults are identified as performance degradation and expressed by the gains of each actuator. Assuming the brake force distribution and the regenerative braking ratios, the over-actuated braking system is simplified into a two-input system. A sliding mode controller is designed to track the driver’s braking and steering commands, even if there exist faults in EMBs. In addition, adaptive schemes are constructed to achieve the fault-tolerant control in braking. The proposed controller and strategies are verified in the EMB HILS (Hardware-in-loop-simulation) unit for various conditions.