Lateral Tyre Force by a Milliken Test on a Flat Track Roadway Simulator

The lateral tyre force versus slip angle and vertical load is obtained through specific tests on the single tyre or with a theoretical-empirical analysis with physical models. This study is about the possibility to use a third way: Executing a particular handling test, known as Force-Moment test, using a Flat Track Roadway Simulator (the Fiat-Elasis MTS FTRS). The understanding and the project of vehicle handling is strongly based on the knowledge of lateral tyre force response [1, 2, 3, 7].     

String tyre model for evaluating steering agility performance using tyre cornering force and lateral static characteristics

The cornering force and lateral static characteristics of a tyre are fundamental factors that describe the steering feel for handling performance. However, it is difficult to justify the contribution of each factor when the tyre’s cornering motion is evaluated through subjective assessment. Currently, the relaxation length of Pacejka’s tyre model is close to describing these tyre motions. Therefore, this paper proposes a string tyre model based on the relaxation length in order to represent the steering performance. The proposed method provides a more accurate modelling of the steering agility performance. Therefore, it is possible to use this model to predict the steering response performance, and this is validated through comparison with a real relaxation length.     

Kinematics of a smart variable caster mechanism for a vehicle steerable wheel

The lateral force of a tyre is a function of the sideslip and camber angles. The camber angle can provide a significant effect on the stability of a vehicle by increasing or adjusting the required lateral force to keep the vehicle on the road. To control the camber angle and hence, the lateral force of each tyre, we can use the caster angle of the wheel. We introduce a possible variable and controllable caster angle ? in order to adjust the camber angle when the sideslip angle cannot be changed. As long as the left and right wheels are steering together according to a kinematic condition, such as Ackerman, the sideslip angle of the inner wheel cannot be increased independently to alter the reduced lateral force because of weight transfer and reduction of the normal load F _z . A variable caster mechanism can adjust the caster angle of the wheels to achieve their top capacity and maximise the lateral force, when needed. Such a system would potentially increase the safety, stability, and maneuverability of the vehicles. Using the screw theory, this paper will examine the kinematics of a variable caster and present the required mathematical equation to calculate the camber angle as a function of suspension mechanism parameters and other relevant variables. Having a steered wheel about a tilted steering axis will change the position and orientation of the wheel with respect to the body of the car. This paper provides the required kinematics of such a suspension and extracts the equations in special practical situations. The analysis is for an ideal situation in which we substitute the tyre with its equivalent disc at the tyre plane.     

Experimental analysis of tyre-enveloping characteristics at low speed

In this study, experiments are conducted to investigate tyre-enveloping characteristics. Four different types of tyres are tested. Parameters such as different tyre inflation pressures, vertical loads and types of obstacles (cleats) are considered. In addition to vertical stiffnesses of all tyres, vertical and horizontal force variations while traversing different obstacles at low speed are studied. The effects of inflation pressure and vertical load on variations of force and moment are investigated. Static test results showed that after a certain vertical displacement, all curves in force–deflection diagrams plotted with and without cleat intersect regardless of cleat and tyre types, depending on the inflation pressure of the tyre, which can be called typical static tyre-enveloping characteristics. Test results at low speed show that there is a considerable influence of the vertical load on vertical and lateral force responses of a tyre.     

Design of a feedback-feedforward steering controller for accurate path tracking and stability at the limits of handling

This paper presents a feedback-feedforward steering controller that simultaneously maintains vehicle stability at the limits of handling while minimising lateral path tracking deviation. The design begins by considering the performance of a baseline controller with a lookahead feedback scheme and a feedforward algorithm based on a nonlinear vehicle handling diagram. While this initial design exhibits desirable stability properties at the limits of handling, the steady-state path deviation increases significantly at highway speeds. Results from both linear and nonlinear analyses indicate that lateral path tracking deviations are minimised when vehicle sideslip is held tangent to the desired path at all times. Analytical results show that directly incorporating this sideslip tangency condition into the steering feedback dramatically improves lateral path tracking, but at the expense of poor closed-loop stability margins. However, incorporating the desired sideslip behaviour into the feedforward loop creates a robust steering controller capable of accurate path tracking and oversteer correction at the physical limits of tyre friction. Experimental data collected from an Audi TTS test vehicle driving at the handling limits on a full length race circuit demonstrates the improved performance of the final controller design.     

Sliding mode-based lateral vehicle dynamics control using tyre force measurements

In this work, a lateral vehicle dynamics control based on tyre force measurements is proposed. Most of the lateral vehicle dynamics control schemes are based on yaw rate whereas tyre forces are the most important variables in vehicle dynamics as tyres are the only contact points between the vehicle and road. In the proposed method, active front steering is employed to uniformly distribute the required lateral force among the front left and right tyres. The force distribution is quantified through the tyre utilisation coefficients. In order to address the nonlinearities and uncertainties of the vehicle model, a gain scheduling sliding-mode control technique is used. In addition to stabilising the lateral dynamics, the proposed controller is able to maintain maximum lateral acceleration. The proposed method is tested and validated on a multi-body vehicle simulator.     

A tyre slip-based integrated chassis control of front/rear traction distribution and four-wheel independent brake from moderate driving to limit handling

This paper presents a tyre slip-based integrated chassis control of front/rear traction distribution and four-wheel braking for enhanced performance from moderate driving to limit handling. The proposed algorithm adopted hierarchical structure: supervisor – desired motion tracking controller – optimisation-based control allocation. In the supervisor, by considering transient cornering characteristics, desired vehicle motion is calculated. In the desired motion tracking controller, in order to track desired vehicle motion, virtual control input is determined in the manner of sliding mode control. In the control allocation, virtual control input is allocated to minimise cost function. The cost function consists of two major parts. First part is a slip-based tyre friction utilisation quantification, which does not need a tyre force estimation. Second part is an allocation guideline, which guides optimally allocated inputs to predefined solution. The proposed algorithm has been investigated via simulation from moderate driving to limit handling scenario. Compared to Base and direct yaw moment control system, the proposed algorithm can effectively reduce tyre dissipation energy in the moderate driving situation. Moreover, the proposed algorithm enhances limit handling performance compared to Base and direct yaw moment control system. In addition to comparison with Base and direct yaw moment control, comparison the proposed algorithm with the control algorithm based on the known tyre force information has been conducted. The results show that the performance of the proposed algorithm is similar with that of the control algorithm with the known tyre force information.     

A study of the relationship between Magic Formula coefficients and tyre design attributes through finite element analysis

Pacejka's Magic Formula Tyre Model is widely used to represent force and moment characteristics in vehicle simulation studies meant to improve handling behaviour during steady-state cornering. The experimental technique required to determine this tyre model parameters is fairly involved and highly sophisticated. Also, total test facilities are not available in most countries. As force and moment characteristics are affected by tyre design attributes and tread patterns, manufacturing of separate tyres for each design alternative affects tyre development cycle time and economics significantly. The objective of this work is to identify the interactions among various tyre design attributes-cum-operating conditions and the Magic Formula coefficients. This objective is achieved by eliminating actual prototyping of tyres for various design alternatives as well as total experimentation on each tyre through simulation using finite element analysis. Mixed Lagrangian–Eulerian finite element technique, a specialized technique in ABAQUS, is used to simulate the steady-state cornering behaviour; it is also efficient and cost-effective. Predicted force and moment characteristics are represented as Magic Formula Tyre Model parameters through non-linear least-squares fit using MATLAB. Issues involved in the Magic Formula Tyre Model representation are also discussed. A detailed analysis is made to understand the influence of various design attributes and operating conditions on the Magic Formula parameters. Tread pattern, tread material properties, belt angle, inflation pressure, frictional behaviour at the tyre–road contact interface and their interactions are found to significantly influence vehicle-handling characteristics.     

A comprehensive study on the stability analysis of vehicle dynamics with pure/combined-slip tyre models

In this paper, a vehicle's lateral dynamic model is developed based on the pure and the combined-slip LuGre tyre models. Conventional vehicle's lateral dynamic methods derive handling models utilising linear tyres and pure-slip assumptions. The current article proposes a general lateral dynamic model, which takes the linear and nonlinear behaviours of the tyre into account using the pure and combined-slip assumptions separately. The developed methodology also incorporates various normal loads at each corner and provides a proper tyre–vehicle platform for control and estimation applications. Steady-state and transient LuGre models are also used in the model development and their responses are compared in different driving scenarios. Considering the fact that the vehicle dynamics is time-varying, the stability of the suggested time-varying model is investigated using an affine quadratic stability approach, and a novel approach to define the critical longitudinal speed is suggested and compared with that of conventional lateral stability methods. Simulations have been conducted and the results are used to validate the proposed method.     

Velocity and normal tyre force estimation for heavy trucks based on vehicle dynamic simulation considering the road slope angle

A precise estimation of vehicle velocities can be valuable for improving the performance of the vehicle dynamics control (VDC) system and this estimation relies heavily upon the accuracy of longitudinal and lateral tyre force calculation governed by the prediction of normal tyre forces. This paper presents a computational method based on the unscented Kalman filter (UKF) method to estimate both longitudinal and lateral velocities and develops a novel quasi-stationary method to predict normal tyre forces of heavy trucks on a sloping road. The vehicle dynamic model is constructed with a planar dynamic model combined with the Pacejka tyre model. The novel quasi-stationary method for predicting normal tyre forces is able to characterise the typical chassis configuration of the heavy trucks. The validation is conducted through comparing the predicted results with those simulated by the TruckSim and it has a good agreement between these results without compromising the convergence speed and stability.     

Identifying tyre models directly from vehicle test data using an extended Kalman filter

Individual tyre models are traditionally derived from component tests, with their parameters matched to force and slip measurements. They are imported into vehicle models which should, but do not always properly provide suspension geometry interaction. Recent advances in Global Positioning System (GPS)/inertia vehicle instrumentation now make full state measurement viable in test vehicles, so tyre slip behaviour is directly measurable. This paper uses an extended Kalman filter for system identification, to derive individual load-dependent tyre models directly from these test vehicle state measurements. The resulting model therefore implicitly compensates for suspension geometry and compliance. The paper looks at two variants of the tyre model, and also considers real-time adaptation of the model to road surface friction variations. Test vehicle results are used exclusively, and the results show successful tyre model identification, improved vehicle model state prediction – particularly in lateral velocity reproduction – and an effective real-time solution for road friction estimation.     

Contents Index Volume 35 and 36

Active safety systems would benefit from tyre force and friction potential information. Different sensor concepts, including, among others, the EU–funded Apollo–project developed tyre sensor based on optical position detection, are being studied. The sensor can measure tyre carcass deflections with respect to the rim. The carcass deflections can be used to calculate tyre forces and they may be exploited in the estimation of friction potential. The waveforms of the sensor signal are illustrated. The vertical and lateral force estimations are presented with unavoidable compensation parts. The tyre sensor measurements were compared to the measurement–vehicle results and good correlations achieved. Continuing activities are concerned with the estimation of friction potential and the detection of aquaplaning.     

3D brush model to predict longitudinal tyre characteristics

A 3D tyre brush model, which aims to predict the longitudinal tyre characteristic under steady-state conditions by modelling the occurring physical effects in the tyre–road contact patch, is presented. The model includes an analytical method to describe the tyre footprint geometry, the pressure distribution, the slip due to the lateral tyre contour, the slip due to braking or traction and the longitudinal as well as the lateral shear stresses on a flattened tyre. The presented development tool offers a method to investigate different rubber friction data (caused by different tread compounds and/or surface textures) and to analyse its influence on longitudinal tyre characteristics. The tyre design is fixed (same casing, dimension and pattern). The results include the shear stresses as well as the different sliding velocities in the contact patch for different slip conditions. The model was developed for a standard summer pattern design and a standard tyre dimension (205/55R16). It can also be adapted to other tread designs and tyre dimensions. To offer a good comparability between model results and test bench measurements, the surface curvature of an internal test rig is considered.     

Analysis of bifurcation and stability for a tractor semi-trailer in planar motion

This paper is intended for bifurcation analysis of a nonlinear tractor semi-trailer vehicle model in planar motion and for investigating its stability under constant running conditions. Bifurcation analysis shows that bifurcation diagrams of a tractor semi-trailer are quite different from those of a single-unit vehicle. Some instability phenomena of the vehicle system such as jackknifing, sideslip, and spinning are explained by correlating them with the behaviour in the neighbourhood of unstable fixed points based on analysis of eigenvectors, phase trajectories, and status of lateral tyre force saturation. It is also found that yaw planar instability of a tractor semi-trailer is caused by lateral tyre force saturation of the tractor's rear axles and/or the trailer's axles. Moreover, the stability region in the state space is demarcated, and a stability index for evaluating size of the stability region in a feasible domain is proposed. Yaw stability under constant driving conditions is analysed by using the proposed stability index.     

A combined use of phase plane and handling diagram method to study the influence of tyre and vehicle characteristics on stability

This paper deals with in-curve vehicle lateral behaviour and is aimed to find out which vehicle physical characteristics affect significantly its stability. Two different analytical methods, one numerical (phase plane) and the other graphical (handling diagram) are discussed. The numerical model refers to the complete quadricycle, while the graphical one refers to a bicycle model. Both models take into account lateral load transfers and nonlinear Pacejka tyre–road interactions. The influence of centre of mass longitudinal position, tyre cornering stiffness and front/rear roll stiffness ratio on vehicle stability are analysed. The presented results are in good agreement with theoretical expectations about the above parameters influence, and show how some physical characteristics behave as saddle-node bifurcation parameters.     

Shear forces in the contact patch of a braked-racing tyre

This article identifies tyre modelling features that are fundamental to the accurate simulation of the shear forces in the contact patch of a steady-rolling, slipping and cambered racing tyre. The features investigated include contact patch shape, contact pressure distribution, carcass flexibility, rolling radius (RR) variations and friction coefficient. Using a previously described physical tyre model of modular nature, validated for static conditions, the influence of each feature on the shear forces generated is examined under different running conditions, including normal loads of 1500, 3000 and 4500 N, camber angles of 0° and?3°, and longitudinal slip ratios from 0 to?20%. Special attention is paid to heavy braking, in which context the aligning moment is of great interest in terms of its connection with the limit-handling feel. The results of the simulations reveal that true representations of the contact patch shape, carcass flexibility and lateral RR variation are essential for an accurate prediction of the distribution and the magnitude of the shear forces generated at the tread–road interface of the cambered tyre. Independent of the camber angle, the contact pressure distribution primarily influences the shear force distribution and the slip characteristics around the peak longitudinal force. At low brake-slip ratios, the friction coefficient affects the shear forces in terms of their distribution, while, at medium to high-slip ratios, the force magnitude is significantly affected. On the one hand, these findings help in the creation of efficient yet accurate tyre models. On the other hand, the research results allow improved understanding of how individual tyre components affect the generation of shear forces in the contact patch of a rolling and slipping tyre.     

Pragmatic Tyre Model for Short Wavelength Side Slip Variations

The first-order relaxation length concept is often used to model transient tyre behaviour. It gives a rather good representation of the lateral force response, also at shorter wavelengths. The self aligning moment appears to behave rather differently and its responses cannot be represented by a relaxation length system only. Based on the analytical frequency response functions of the pneumatic trail of the brush type tyre model, a new pragmatic approach is developed. The model consists of a phase leading system in series with the first-order model for the lateral force. The results are compared to the responses of a discrete brush type simulation model. It appears that the aligning moment can be represented by this new pragmatic model very well.     

Pragmatic Tyre Model for Short Wavelength Side Slip Variations

The first-order relaxation length concept is often used to model transient tyre behaviour. It gives a rather good representation of the lateral force response, also at shorter wavelengths. The self aligning moment appears to behave rather differently and its responses cannot be represented by a relaxation length system only. Based on the analytical frequency response functions of the pneumatic trail of the brush type tyre model, a new pragmatic approach is developed. The model consists of a phase leading system in series with the first-order model for the lateral force. The results are compared to the responses of a discrete brush type simulation model. It appears that the aligning moment can be represented by this new pragmatic model very well.