化学成分对ERW油井管用J55热轧钢带组织性能的影响

设计了8种不同化学成分的J55钢,通过组织观察、性能检验等,分析、研究了化学成分对ERW油井管用J55热轧钢带组织性能的影响。结果表明:所有试验钢的焊缝质量均良好,具有良好的焊接性能;碳含量为0.10%时的组织为铁素体加极少量的细珠光体,随着碳含量的增加,珠光体的量增加,当碳含量增加至0.18%,为铁素体加珠光体组织;随着碳含量的增加,抗拉强度明显增加,屈服强度稍有增加,冲击功下降;当加入0.01%~0.04%V时,钢的屈服强度和抗拉强度均明显增加;添加一定的Cu、Ni时,强度增加,特别是屈服强度明显增加,冲击功稍有降低;钙处理钢的纯净度明显地高于稀土处理钢,其管坯超声波探伤合格率明显提高;随着硫含量的降低,冲击功明显增加,经深脱硫的钢超声波探伤合格率提高。     

基于DSP/GPRS的长输管道阴极保护在线监测系统的设计

针对人工巡检长输管道阴极保护的不足,设计了一种长输管道阴极保护在线监测系统.整个系统分为硬件部分和软件部分.硬件部分基于DSP和GPRS技术,实现管道阴极保护电位的在线测量和信息的传输.软件部分基于VC ++,实现数据的接收、保存和计算机辅助分析.现场试验表明:研制的在线监测系统实时性好、可靠性高.     

A multi-commodity flow network design problem

There exist systems which can be usefully described by a network containingarcs through which a commodity of one type flows. This paper is concerned with finding a solution procedure for a particular multi-commodity flow network design problem. The problem is to identify a set of arcs in the network such that if travel is prohibited in them all flow travels by feasible paths and its total cost is minimal. The total flow in each arc may not exced its capacity, which is a known constant. Each arc and each node of the network has a non-negative constant unit traversal cost. Between each pair of distinct nodes there is a given non-negative rate of flow from the first vertex to the second which may be split up among a number of paths according to some constant traversal cost flow assignment process. The optimality criterion is the total traversal cost of all flow, which is to be minimized. Previous work on network design problems of this type is surveyed. The principal contribution of this paper is the presentation of a solution procedure for the above problem based on branch and bound enumeration. An illustrative numerical example is included. Computational experience gained in using the procedure with a FORTRAN IV program on an IBM 370 is favourable.     

含水原油水力计算

讨论了含水原油为牛顿流体和非牛顿流体情况下管流的水力计算。当含水原油为牛顿流体时，其压降计算按传统方法采用达西公式计算；当含水原油为非牛顿流体时，介绍了幂律流体和宾汉流体的本构方程、流态判别方法、层流和紊流压降计算公式。还介绍了含水原油为牛顿流体时黏度计算的一些经验公式，并提出了一种回归含水原油黏度(牛顿流体)、表观黏度(非牛顿流体)计算公式的新方法，将回归公式的计算结果与实测结果进行了比较。     

浅谈我国中小企业成本控制

企业是以盈利为目的的社会团体,追求的是经营利润最大化,其开展各项活动的最终目标是实现企业价值最大化,而进行成本控制则是实现这一目标的重要手段。我国的大部分中小型企业成本控制程度较差,生产效率较低,运作流程较混乱,所以生产成本均较高,对企业内部成本控制进行科学、合理的整顿,在生产成本控制方面大有潜力可挖。本文从中小企业成本控制的重要性入手,对中小企业成本控制中存在的一些问题进行分析,试探讨成本控制的有效方法。     

An investigation of passenger interchange and train standing time at LRT stations: (i) Alighting,boarding and platform distribution of passengers

The train standing-time at a station is a determinant of the line capacity and the necessary fleet-size. Its determination is usually based on the assumption that boarding and alighting is uniform at all doors of a train. Uniform boarding and alighting is conceivable if passengers distribute themselves uniformly on station platforms while waiting for trains. The validity of the uniformity assumptions is tested using data from two stations (one CBD, one suburban) of the Calgary, Alberta LRT system. It is shown that passenger distribution on the platform, alighting and boarding is not uniform and is closely related to the location of platform access points. Some strategies that will encourage uniformity are discussed. However, procedures that can estimate the standing time for non-uniform boarding and alighting need to be developed.     

Two-class freeway traffic regulation to reduce congestion and emissions via nonlinear optimal control

The objective of this paper is the regulation of freeway traffic by means of optimal control techniques. A first innovative aspect of the proposed approach is the adopted objective function in which, besides the reduction of traffic congestion (which is typically considered in traffic control schemes), the minimization of traffic emissions is also included. Moreover, a multi-class framework is defined in which two classes of vehicles (cars and trucks) are explicitly modelled, and specific control actions for each vehicle class are sought. This results in the formulation of a multi-objective optimal control problem which is described in the paper and for which a specific solution algorithm is developed and used. The algorithm exploits a specific version of the feasible direction algorithm whose effectiveness is demonstrated in the paper by means of simulation results.     

A demand model for recreational travel

A model is developed to describe and to predict the patterns of regional recreational travel. The model is designed in such a manner to allow its calibration and use without the need to conduct extensive travel surveys in a large region. To allow its use for prediction, the model is based on a causal structure and attempts to derive recreational travel demand from behavioural variables. The main hypothesis of the model is that the amount of recreational travel a recreation area attracts is affected by the accessibility of this area to points of demand potential and by its attractiveness relative to the recreation areas.

The calibration is founded on actual data on recreational travel to national forests in California, U.S.A. It is found in the calibration that accessibility to demand potential is the single most important determinant of recreational travel attraction. A simple relationship is derived to relate travel to each national forest to the relative accessibility of the forest. The model is calibrated and statistically validated.

It is suggested that when constructing travel demand models simplicity be sought, even at the risk of the loss of some explanatory power. In the calibration of such models statistical significant is more important than the ability to reproduce observed patterns.     

Tree-building with complex cost structures — A new algorithm for incorporation into transport demand models

This paper highlights some of the difficulties involved in the implementation of complex cost structures in the tree-building section of a transport demand model. The conventional tree-building algorithm is briefly described and is seen to be inadequate for the present purpose. A new algorithm is then presented which is able to implement complex cost structures properly. An example is given of the application of this algorithm to the building of tree in a public transport network. The performance of a computer program incorporating the new alrogrithm is evaluated against alternative methods of implementing complex cost structures. Some mention is then made of the vast range of potential uses for the new algorithm in the field of transport modelling and simulation.     

高压燃气管道储气能力分析

高压燃气管道储气能力与两端压力和管长有着密切的联系.为了得到高压管道的储气量与压力和管长的关系,利用稳态仿真模型,采用四阶龙格-库塔法对模型进行求解,对求出的沿线压力进行线性拟合,得到沿线压力变化公式.结合储气定义推导出储气量与管长的关系式,并得到实例验证.从关系式来看,当管长等于最优管长时储气量最大.     

管道污垢监测装置的研究进展

介绍了管道污垢的种类,并对国内外目前较流行的污垢监测设备进行了分析。污垢广泛存在于各种工业生产过程中,使管道截面积减小,设备处理能力降低,能耗增加,甚至使管道破裂,带来巨大的经济损失。污垢的形成是个复杂的过程,现阶段的研究处在实验阶段,没有形成完整的理论体系,污垢监测装置的研发显得尤为重要。采用合理、经济的监测装置有利于除垢、防垢工作的进行。国内污垢监测装置的开发起步较晚,技术水平还不太成熟,通过对不同污垢监测装置的分析比较,可以促进国内污垢监测水平的提高。     

A new method for evaluation of level of service in pedestrian facilities

Safe and comfortable walking is essential for pedestrian movement in modern urban transportation systems. Since pedestrian traffic cannot be restricted in some specified streets, some measures for pedestrians have to be taken everywhere in urban areas. This research describes a way to evaluate ordinary sidewalks, and two different methods are proposed. One is an evaluation based on pedestrian behaviour and the other is an evaluation based on pedestrian opinion. Using the indices of pedestrian density and sidewalk width, we can estimate the level of service of sidewalk usage. But generally speaking, since it is not often that a sidewalk is insufficient to deal with pedestrian flow, another approach is necessary for its evaluation, that is, pedestrian awareness of sidewalks must be taken into account. The former method is recommended for all sidewalks, especially with comparatively heavy pedestrian traffic, and the latter method is recommended for ones with light pedestrian traffic.     

改进不等时距GM模型在施工控制中的应用

刚构桥施工过程中应力变化复杂,影响因素多,较难预测把握应力发展趋势,实测应力缺失时,单一使用GM(1,1)模型预测精度低,对原始应力数据要求苛刻.文章改进了不等时距GM(1,1)模型,结合罗天乐特大桥工程进行验证,结果表明,改进不等时距GM(1,1)模型在刚构桥施工应力预测中具有较好的适用性和较高的预测精度.     

基于工期目标的单跨四车道市政隧道施工优化研究

贵阳南垭路三号隧道为两座分离式的单跨四车道市政隧道,最大开挖跨度21.878 m,最大开挖面积为245.7 m^2,处于喀斯特地貌区,地下岩溶和岩石节理裂隙发育,围岩破碎且施工工期紧。基于以上施工背景,文章开展基于工期目标的软弱破碎围岩单跨四车道市政隧道施工优化研究。首先利用强度折减法对裸洞围岩稳定性进行定量评价,发现Ⅳ级围岩裸洞具有自稳条件,Ⅴ级围岩裸洞则不满足安全系数要求;在此基础上结合不同工法的施工模拟和工期推演,对施工方案进行优化,最终确定了南垭路三号隧道在Ⅳ级围岩地段采用三台阶五步法施工,Ⅴ级围岩地段采用双侧壁导坑法施工的方案;最后对洞身Ⅳ级、Ⅴ级围岩地段工法转换进行优化,将施工工期提前了9个月,创造了显著的经济和社会效益,研究成果可为今后类似工程的修建提供借鉴。     

Surrounding Rock Classification of Banxi Group Slate with Abundant Water北大核心CSCD

For water-rich slate, surrounding rock argillization and softening is a serious problem. At present the uni-axial saturated compressive strength of rock is used as one of the indexes for classification of water-rich slate sur-rounding rock. Since Banxi Group slate has special geological characteristics, the above mentioned grading index is not completely suitable for its surrounding rock classification due to limitations. For this reason, using the Youfang-ping tunnel at the Changsha to Kunming Section of the Shanghai to Kunming high-speed railway in China as an ex-ample, a softening coefficient is introduced, and the underground water, rock mass integrity coefficient and angle of the main structural surface and tunnel axis are regarded as the main controlling factors. A system of surrounding rock classification for tunnels in water-rich slate is established. Based on the theory of fuzzy mathematics, the member-ship function of each index is structured and the weight of each index is calculated by AHP, and the grade of the sur-rounding rock is determined according to the maximum membership degree principle. The results show that the fuzzy information of surrounding rock classification is processed effectively and the classification of surrounding rock is achieved by qualitative analysis to quantitative evaluation by using fuzzy theory. The surrounding rock classification determined by introducing the softening coefficient on the basis of fuzzy theory is close to that determined in practical application, indicating that the practicability of this classification of tunnel surrounding rock in water-rich slate is high. This classification system therefore is a reference for the design and construction of tunnels in water-rich slate. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Driving behaviour models enabling the simulation of Advanced Driving Assistance Systems: revisiting the Action Point paradigm

In the field of Intelligent Transportation Systems (ITS), one of the most promising sub-functions is that of Advanced Driver Assistance Systems (ADAS). Development of an effective ADAS, and one that is able to gain drivers’ acceptance, hinges on the development of a human-like car-following model, and this is particularly important in order to ensure the driver is always ‘in the (vehicle control) loop’ and is able to recover control safely in any situation where the ADAS may release control. One of the most commonly used models of car-following is that of the Action Point (AP) (psychophysical) paradigm. However, while this is widely used in both micro-simulation models and behavioural research, the approach is not without its weaknesses. One of these, the potential redundancy of some of the identified APs, is examined in this paper and its basic structure validated using microscopic driving behaviour collected on thirteen subjects in Italy. Another weakness in practical application of the Action Point theory is the identification of appropriate thresholds, accounting for the perception, reaction and adjustment of relative speed (or spacing) from the leading vehicle. This article shows that this identification is problematic if the Action Point paradigm is analysed in a traditional way (car-following spirals), while it is easier if the phenomenon is analysed in terms of car-following ‘waves’, related to Time To Collision (TTC) or the inverse of TTC. Within this new interpretative framework, the observed action points can be observed to follow a characteristically linear pattern. The identification of the most significant variables to be taken into account, and their characterisation by means of a simple linear pattern, allows for the formulation of more efficient real-time applications, thereby contributing to the development and diffusion of emerging on-board technologies in the field of vehicle control and driver’s assistance.     

The concept and impact analysis of a flexible mobility on demand system

This paper introduces an innovative transportation concept called Flexible Mobility on Demand (FMOD), which provides personalized services to passengers. FMOD is a demand responsive system in which a list of travel options is provided in real-time to each passenger request. The system provides passengers with flexibility to choose from a menu that is optimized in an assortment optimization framework. For operators, there is flexibility in terms of vehicle allocation to different service types: taxi, shared-taxi and mini-bus. The allocation of the available fleet to these three services is carried out dynamically so that vehicles can change roles during the day. The FMOD system is built based on a choice model and consumer surplus is taken into account in order to improve passenger satisfaction. Furthermore, profits of the operators are expected to increase since the system adapts to changing demand patterns. In this paper, we introduce the concept of FMOD and present preliminary simulation results. It is shown that the dynamic allocation of the vehicles to different services provides significant benefits over static allocation. Furthermore, it is observed that the trade-off between consumer surplus and operator’s profit is critical. The optimization model is adapted in order to take into account this trade-off by controlling the level of passenger satisfaction. It is shown that with such control mechanisms FMOD provides improved results in terms of both profit and consumer surplus.     

Latent structure in road systems

The application of Q-analysis to road transport systems is introduced in this paper, but no prior knowledge of the methodology is assumed. It is argued that the route-link relation of transport systems has a connectivity structure overlooked by conventional transportation theory, and that this structure constrains traffic flow. This is illustrated at the micro-level by a complicated road intersection, and at the macro-level with a simple analysis of a town. The representation of road systems is discussed in this context, and it leads to a new result called the Link Face Theorem. It is suggested that the conventional theory can be usefully extended by studying the latent structure of road systems which is presently overlooked.