支架法在海中箱梁现浇施工中的应用

针对海中箱梁现浇施工中的工程量大、工期紧迫、悬臂法施工不能满足工期要求和施工难度大等问题,文章结合青岛海湾大桥箱梁现浇施工实践,介绍以钢管桩支撑作为承载基础,采用贝雷梁与碗扣式支架相结合的支架,成功地解决现浇箱梁施工难题的方法。     

浅谈高速公路美丽服务区的建设思路

构建美丽服务区应以绿色、低碳、循环发展、智慧化以及满足出行用户的多元化需求为出发点,从节能建筑、清洁能源应用、污水处理及循环利用、固废处理及循环利用、生态服务、人性化服务等环节综合考虑,从而提升服务区整体形象,加强服务区设施的人性化和标准化服务管理。本文从高速公路美丽服务区构建的必要性入手,探讨了从节能建筑、清洁能源应用、污水处理及循环利用、固废处理及循环利用、生态服务、人性化服务等方面构建美丽服务区。     

桥梁下部结构加固主要工艺

结合京福高速K30+924通道桥维修加固工程,叙述了高压喷射灌浆法、粘贴碳纤维贴片法及钢板补强法的施工工艺。     

基于声电类比法的管系气柱固有频率的计算

基于平面波动理论与电学系统方程的等价,建立管道气柱单元声学等效电路.采用MATLAB/SIMULINKL软件,通过谐振法对气柱系统进行电路仿真,得到其各阶固有频率,并与传递矩阵法计算结果相比较,误差很小,说明采用声电类比法计算气柱固有频率是有效的.     

武汉长江隧道盾构段结构型式研究

武汉长江隧道是我国在高水压、强透水地层中修建的第一条大直径盾构隧道,且左侧河床历年冲淤变化幅度较大,如何选择合理的隧道结构型式是工程设计必须考虑的关键问题.为此,在国内外现有单层管片衬砌和全环双层衬砌的基础上,研究提出了一种新型的“管片衬砌+非封闭内衬”的双层衬砌结构该结构在不增加隧道开挖直径的前提下,允分利用圆形隧道底部和两侧的富余空间现浇钢筋混凝土,并与车道板结构共同组成非封闭二次衬砌结构,可以大幅度地减少河床冲淤变化时的结构横向变形,并确保隧道底部与两侧这些重点部位的防水性能及结构长期稳定性,是一种值得推荐的创新结构方案.     

浅覆土砂层土压平衡盾构始发掘进对环境的影响分析

盾构始发和到达安全掘进控制技术是困扰盾构隧道施工的主要难题之一。盾构进出洞施工中,面临掌子面失稳、土体坍塌、涌水涌砂、地表沉陷、盾构"抬头及磕头"等诸多施工风险。本文从基坑及隧道的破坏模式,塑性区分布范围出发,通过有限差分法针对易受扰动的浅埋砂层地层盾构始发段进行了研究,为加固区范围大小的选择提供了依据。研究表明,在不采取加固措施时,基坑开挖后隧道始发段的竖向位移、拱底的隆起和最大纵向挤出变形量均过大,显示基坑将发生坍塌等破坏。当盾构始发段主要加固措施为旋喷桩,加固后的土体的物理参数得到了显著的提升。本文在此基础上得出了旋喷桩的合理加固区域。     

紧邻有轨电车高架桥基坑施工安全保障措施

结合苏州太湖大道改造工程阳山西路隧道基坑工程,文章分析了紧邻有轨电车高架桥基坑施工时存在的风险及相应安全保证措施,研究了各主要施工工序的控制要点,并对施工期间可能出现的风险提出了针对性的应急措施,不仅可以确保基坑的安全和稳定,而且将基坑施工对高架桥的影响降到最低,安全保障措施可供类似工程参考。     

绝热材料下沉对蒸汽管道热损失的影响

文中从绝热材料下沉的角度，利用形状因子法对高温蒸汽管线保温问题进行了探讨。通过理论分析和实验测试，得出了“复合硅酸盐保温涂料＋复合硅酸盐保温型材＋复合硅酸盐保温涂料”的保温结构，可有效改善绝热材料的下沉问题。     

开挖工况对偏压连拱隧道结构及上覆山体稳定性的影响

文章采用弹塑性有限元数值模拟,对不同开挖工况下地形偏压连拱隧道围岩及主体结构的应力场、位移场、破坏区分布进行了分析,研究了开挖工况对隧道上覆山体稳定性的影响。分析表明,当先开挖浅埋侧隧道时,围岩、结构及上覆山体稳定性都要优于先开挖深埋侧隧道的方式,其计算结果可为同类隧道的设计、施工提供有益的参考。     

埋地管道防腐保温层失效评价

明确埋地管道防腐保温层的技术评价标准,对埋地钢质管道的安全运行,延长管道使用寿命具有重要意义。为了对埋地管道防腐保温层做出有效评价,从间接检测与开挖检测2个方面,结合现场检测数据,提出了基于防腐保温层的电流衰减率、绝缘电阻率、质量状况与厚度的分级评价标准及基于4种评价指标的综合评判方法。工程实践表明,该评价标准对防腐保温层是否存在失效能做出有效判断。     

广州地铁东山口站站台隧道扩挖修建技术

广州地铁六号线东山口站为国内首例在周边环境复杂条件下实施"先隧后站、盾构隧道扩挖"修建地铁车站的工程。文章介绍了该站左线站台隧道在盾构隧道的基础上扩挖形成地铁车站的主要修建技术及施工特点和难点。实践证明,采用盾构与明(暗)挖法相结合修建地铁车站的施工技术,是城市繁华地区修建地铁车站有效解决区间盾构隧道与车站施工相互干扰难题的重要途径。     

Catching the tail: Empirical identification of the distribution of the value of travel time

Recent methodological advances in discrete choice analysis in combination with certain stated choice experiments have allowed researchers to check empirically the identification of the distribution of latent variables such as the value of travel time (VTT). Lack of identification is likely to be common and the consequences are severe. E.g., the Danish value of time study found the 15% right tail of the VTT distribution to be unidentified, making it impossible to estimate the mean VTT without resorting to strong assumptions with equally strong impact on the resulting estimate. This paper analyses data generated from a similar choice experiment undertaken in Sweden during 2007-2008 in which the range of trade-off values between time and money was significantly increased relative to the Danish experiment. The results show that this change allowed empirical identification of effectively the entire VTT distribution. In addition to informing the design of future choice experiments, the results are also of interest as a validity test of the stated choice methodology. Failure in identifying the right tail of the VTT would have made it difficult to maintain that respondents’ behaviour is consistent with utility maximisation in the sense intended by the experimenter.     

原油管道检测器通过能力评价方法

为了探明管道内部通过能力,保证管道内部腐蚀检测器的顺利投放,制定了由泡沫检测器到几何尺寸检测器的管道通过能力检测流程,并将此方法在多条原油管线上进行了验证。结果表明：该方法能准确地识别管线上的变形尺寸大小,并对变形部位进行定位。根据检测结果对管道通过能力进行评价,对不符合要求的管段及时进行修复,保证了后期检测的顺利进行。此外,在检测的过程中有效地清理了管道内部污物,提高检测器通过能力及管道的输油效率。     

川气东送天然气管道线路水合物形成预测

为了更好地预测、分析和处理水合物造成的不良后果,以川气东送管道为例讨论了天然气水合物的形成原因,提出了输气管线水合物预测模型,并建立了水合物形成预测的压力和温度计算模型,编制了“水合物预测软件”,预测该管道线路和场站的水合物形成条件和易形成水合物的区域.文中通过以上方法很好地预测了川气东送管道水合物的形成区域及情况,该预测方法可用于天然气管道线路水合物的形成预测.     

输油气管道清管器跟踪定位方法及跟球选址技巧

以提高清管器现场定点跟踪的准确性为目的,提出了清管器模糊定位的数学计算方法,并针对球前后不同介质形式,给出了相应的选址技巧。结合实际应用,结果表明该简易计算方法对清管器的模糊位置判断具有一定的可信度,应用此方法计算的时间要综合考虑管道路由情况,可更加准确地预判清管器到达时间,对现场实际操作人员的工作具有一定的借鉴意义。     

Social Impacts of Transport: Literature Review and the State of the Practice of Transport Appraisal in the Netherlands and the United Kingdom

Abstract

Transport appraisals in European countries increasingly address three dimensions of sustainability—economic, ecological and social. However, social impacts of transport have been underexposed in (ex‐ante) transport project appraisal, at least in the Netherlands. Firstly, this article presents a theoretical framework describing the relationships between determinants of social impacts of transport; it also provides a definition and categorization of those impacts. Secondly, the article reviews the state of the practice of national transport project appraisal in the Netherlands and the United Kingdom. The article shows that social impacts of transport investments can take on many forms and their levels of importance may vary widely, in project appraisal. The UK transport appraisal guidance includes a spectrum of social impacts through quantitative and qualitative assessments that is broader than the Dutch appraisal guidance. However, it does not cover the full range as identified in the literature. This holds, in particular, for the temporary impacts of transport investments, health impacts, social cohesion, the distribution and accumulation of impacts across population groups and social justice. All in all, it can be concluded that there is a long way to go before social impacts of transport projects are completely included in appraisals, in a way that allows us to compare them to economic and ecological effects.     

数字图像处理技术在隧道围岩收敛量测中应用的初步研究

文章系统地总结了国内外图像处理技术在隧道工程中的应用现状和隧道变形收敛量测的各种方法,并对各种方法的优缺点进行了详细分析;尝试了应用数字图像处理技术对隧道围岩收敛进行量测的新方法(二次比较法);编制了一套隧道图像处理系统(TUNNEL IMAGE PROCESSING SYSTEM,简称TIPS)。室内试验证明,本系统对距离的量测结果是可靠的,灵敏度和精度达到了相关要求。本研究成果可供有关人员在现场实用研究中参考。     

Role of the Railways in the Future of Air Transport

Abstract

The role of the railways in the air transport industry is usually limited to provision of access to airports. However, the development of high-speed rail networks and the congestion and environmental problems faced by the air transport industry suggest the railways could have a greater role in working with the airlines to provide an integrated transport service for medium-distance journeys (up to 800 km). Many air journeys involve two flights and a transfer at a hub airport. The alternative being investigated here would replace air journeys by a rail journey and a flight, and a transfer between them at the hub airport. Such integration could offer a positive alternative to aircraft on some routes and lead to railway journeys to airports becoming part of air transport services, and not only to provide access to them. Integration could therefore provide a better use of available air capacity rather than duplicating some high-speed rail routes and services.     

土质浅埋隧道CRD法施工中隔壁变形监测与分析

以天恒山隧道为工程依托,应用全站仪对边量测原理,对土质浅埋隧道CRD法施工中隔壁的变形情况进行现场监控量测,研究和分析了中隔壁的变形规律.研究结果表明:中隔壁的水平变形受CRD法前3部施工影响较大,第1部和第3部施工使中隔壁产生收敛变形,而第2部施工使中隔壁产生扩张变形;中隔壁的竖向变形受CRD法各部施工影响都较大,只有仰拱全部闭合后竖向变形才趋于缓和.     

用正交试验法确定弯管几何参数对变形量的影响

在不同壁厚、弯曲角度以及弯曲半径条件下,用计算机模拟方法,计算出内部压力对弯管变形量的影响,采用正交试验的方法找出对变形量影响较大的几何参数。数据显示弯曲角度对弯管的变形量有重要影响,角度越大,在相同受力条件下,弯管变形量越显著。