Design of rollover prevention controller with linear matrix inequality-based trajectory sensitivity minimisation

This paper presents a method to design a rollover prevention controller for vehicle systems. The vehicle rollover can be prevented by a controller that minimises the lateral acceleration and the roll angle. Rollover prevention capability can be enhanced if the controlled vehicle system is robust to the variation of the height of the centre of gravity and the speed of the vehicle. For this purpose, a robust controller is designed with linear matrix inequality-based trajectory sensitivity minimisation. Differential braking and active suspension are adopted as actuators that generate yaw and roll moments, respectively. The newly proposed method is shown to be effective in preventing rollover by the simulation on a non-linear multibody dynamic simulation software, CarSim^®.     

Rollover mitigation for a heavy commercial vehicle

A heavy commercial vehicle has a high probability of rollover because it is usually loaded heavily and thus has a high center of gravity. An anti-roll bar is efficient for rollover mitigation, but it can cause poor ride comfort when the roll stiffness is excessively high. Therefore, active roll control (ARC) systems have been developed to optimally control the roll state of a vehicle while maintaining ride comfort. Previously developed ARC systems have some disadvantages, such as cost, complexity, power consumption, and weight. In this study, an ARC-based rear air suspension for a heavy commercial vehicle, which does not require additional power for control, was designed and manufactured. The rollover index-based vehicle rollover mitigation control scheme was used for the ARC system. Multi-body dynamic models of the suspension subsystem and the full vehicle were used to design the rear air suspension and the ARC system. The reference rollover index was tuned through lab tests. Field tests, such as steady state cornering tests and step steer tests, demonstrated that the roll response characteristics in the steady state and transient state were improved.     

Stability and optimised H∞ control of tripped and untripped vehicle rollover

Vehicle rollover is a serious traffic accident. In order to accurately evaluate the possibility of untripped and some special tripped vehicle rollovers, and to prevent vehicle rollover under unpredictable variations of parameters and harsh driving conditions, a new rollover index and an anti-roll control strategy are proposed in this paper. Taking deflections of steering and suspension induced by the roll at the axles into consideration, a six degrees of freedom dynamic model is established, including lateral, yaw, roll, and vertical motions of sprung and unsprung masses. From the vehicle dynamics theory, a new rollover index is developed to predict vehicle rollover risk under both untripped and special tripped situations. This new rollover index is validated by Carsim simulations. In addition, an H-infinity controller with electro hydraulic brake system is optimised by genetic algorithm to improve the anti-rollover performance of the vehicle. The stability and robustness of the active rollover prevention control system are analysed by some numerical simulations. The results show that the control system can improve the critical speed of vehicle rollover obviously, and has a good robustness for variations in the number of passengers and longitude position of the centre of gravity.     

基于制动与悬架系统的车辆主动侧翻控制的研究

为提高车辆抗侧翻能力,建立了10自由度整车侧翻动力学模型,应用车辆动力学和轮胎力耦合特性,提出了一种基于差动制动和半主动悬架协同工作的车辆主动抗侧翻控制策略。通过对制动力矩的差动调节和半主动悬架阻尼力的适时匹配,实现对车辆侧翻的有效控制。根据子系统运动特性,设计了制动系统基于滑移率的积分滑模控制器和悬架系统灰模糊控制器。分别对制动、悬架控制及综合控制进行的鱼钩试验仿真结果表明,综合控制策略可有效降低危险时域车辆的侧倾角,相对于单一系统控制进一步提高了车辆抗侧翻能力。     

Integrated chassis control for a three-axle electric bus with distributed driving motors and active rear steering system

This paper describes an integrated chassis control framework for a novel three-axle electric bus with active rear steering (ARS) axle and four motors at the middle and rear wheels. The proposed integrated framework consists of four parts: (1) an active speed limiting controller is designed for anti-body slip control and rollover prevention; (2) an ARS controller is designed for coordinating the tyre wear between the driving wheels; (3) an inter-axle torque distribution controller is designed for optimal torque distribution between the axles, considering anti-wheel slip and battery power limitations and (4) a data acquisition and estimation module for collecting the measured and estimated vehicle states. To verify the performances, a simulation platform is established in Trucksim software combined with Simulink. Three test cases are particularly designed to show the performances. The proposed algorithm is compared with a simple even control algorithm. The test results show satisfactory lateral stability and rollover prevention performances under severe steering conditions. The desired tyre wear coordinating performance is also realised, and the wheel slip ratios are restricted within stable region during intensive driving and emergency braking with complicated road conditions.     

Integration of vehicle yaw stabilisation and rollover prevention through nonlinear hierarchical control allocation

This work presents an approach to rollover prevention that takes advantage of the modular structure and optimisation properties of the control allocation paradigm. It eliminates the need for a stabilising roll controller by introducing rollover prevention as a constraint on the control allocation problem. The major advantage of this approach is the control authority margin that remains with a high-level controller even during interventions for rollover prevention. In this work, the high-level control is assigned to a yaw stabilising controller. It could be replaced by any other controller. The constraint for rollover prevention could be replaced by or extended to different control objectives. This work uses differential braking for actuation. The use of additional or different actuators is possible. The developed control algorithm is computationally efficient and suitable for low-cost automotive electronic control units. The predictive design of the rollover prevention constraint does not require any sensor equipment in addition to the yaw controller. The method is validated using an industrial multi-body vehicle simulation environment.     

兼具馈能与主动抗侧倾功能的电控液压悬架系统设计与研究

为解决特种车辆或载重车辆在极端工况下易侧翻的问题,提出了一种兼具馈能与主动抗侧倾功能的电控液压悬架系统。对该悬架系统的主动抗侧倾模式和馈能模式进行了功能原理设计与分析;针对主动抗侧倾模式与馈能模式,构建了电液悬架系统仿真模型;设计了电液悬架系统主动抗侧倾模糊PID控制策略和侧倾力矩分配方案,以及执行机构逻辑门限值控制策略,并基于Matlab/Simulink、TruckSim和AMESim仿真软件,搭建了电液悬架系统主动抗侧倾控制策略联合仿真平台;对装配有电液悬架系统的车辆模型在极限工况下的抗侧倾性能进行仿真分析,并对车辆在随机路面激励输入下的馈能特性进行仿真分析。结果表明,装配该电液悬架的特种车辆具备较强的防侧翻能力,并具有较好的悬架运动能量回收潜力。     

Heavy duty vehicle rollover detection and active roll control

This paper presents the results of a comprehensive study on heavy-duty vehicle (HDV) roll stability improvement technology. The proposed rollover threat warning system uses the real-time dynamic model-based time-to-rollover (TTR) metric as a basis for online rollover detections. Its feasibility for implementation in a HDV rollover threat detection system is demonstrated through vehicle dynamic simulation studies. The research on the development of a rollover threat detection system is further enhanced in combination with an active roll control system using active suspension mechanism to improve heavy-duty trucks’ roll stability both in the static cornering and in emergency maneuvers. It has been demonstrated that the roll stability of typical heavy-duty trucks has been largely improved by the proposed active safety monitoring and control system.     

Active roll control for rollover prevention of heavy articulated vehicles with multiple-rollover-index minimisation

This paper presents the application of a nominal control design algorithm for rollover prevention of heavy articulated vehicles with active anti-roll-bar control. This proposed methodology is based on an extension of linear quadratic regulator control for ‘state derivative-induced (control coupled) output regulation’ problems. For heavy articulated vehicles with multiple axles, a performance index with multiple rollover indices is proposed. The proposed methodology allows us to compare the usefulness of various control configurations (i.e. actuators at different axles of the vehicle) based on the interaction of this control configuration with vehicle dynamics. Application of this methodology to a specific heavy articulated vehicle with a tractor semi-trailer shows that a single active anti-roll-bar system at the trailer unit gives better performance than multiple-axle actuators at tractor and trailer together with the single lane change manoeuvre as the external disturbance. Thus, the proposed methodology of this paper not only highlights the importance of the interactions between control and vehicle dynamics in rollover prevention problems but, in fact, proposes a novel technique to exploit the benefits of these interactions judiciously.     

Coordinated control strategies for active steering,differential braking and active suspension for vehicle stability,handling and safety improvement

ABSTRACT

In this paper, a coordinated control strategy is proposed to provide an effective improvement in handling stability of the vehicle, safety, and comfortable ride for passengers. This control strategy is based on the coordination among active steering, differential braking, and active suspension systems. Two families of controllers are used for this purpose, which are the high order sliding mode and the backstepping controllers. The control strategy was tested on a full nonlinear vehicle model in the environment of MATLAB/Simulink. Rollover avoidance and yaw stability control constraints have been considered. The control system mainly focuses on yaw stability control. When rollover risk is detected, the proposed strategy controls the roll dynamics to decrease rollover propensity. Simulation results for two different critical driving scenarios, the first one is a double lane change and the other one is a J-turn manoeuvre, show the effectiveness of the coordination strategy in stabilising the vehicle, enhancing handling and reducing rollover propensity.     

用于电子稳定程序的汽车模型和控制策略

电子稳定程序(ElectronicStabilityProgram)是行驶车辆的一种主动安全系统,它综合了制动防抱死系统,驱动力控制系统和横摆力矩控制系统,使行驶车辆的安全性得到很大的提高。本文首先建立用于电子稳定程序的汽车模型,包括车身模型、悬架模型、转向模型、轮胎模型、制动系统模型、发动机模型和传动系模型。然后建立了主动横摆控制的控制逻辑,通过加入制动防抱死系统和牵引力控制系统,构成了电子稳定程序的控制逻辑。最后对移线运动、紧急转向、制动转向、驱动转向4个典型的工况进行仿真,从而验证了电子稳定程序控制逻辑的正确性。     

Design of a rollover index-based vehicle stability control scheme

This paper presents a rollover index (RI)-based vehicle stability control (VSC) scheme. A rollover index, which indicates an impending rollover, is developed by a roll dynamics phase plane analysis. A model-based roll estimator is designed to estimate the roll angle and roll rate of the vehicle body with lateral acceleration, yaw rate, steering angle and vehicle velocity measurements. The rollover index is computed using an estimated roll angle, estimated roll rate, measured lateral acceleration and time-to-wheel lift. A differential braking control law is designed using a direct yaw control method. The VSC threshold is determined from the rollover index. The effectiveness of the RI, the performance of the estimator and the control scheme are investigated via simulations using a validated vehicle simulator. It is shown that the proposed RI can be a good measure of the danger of rollover and the proposed RI-based VSC scheme can reduce the risk of a rollover.     

Vehicle lift-off modelling and a new rollover detection criterion

The modelling and development of a general criterion for the prediction of rollover threshold is the main purpose of this work. Vehicle dynamics models after the wheels lift-off and when the vehicle moves on the two wheels are derived and the governing equations are used to develop the rollover threshold. These models include the properties of the suspension and steering systems. In order to study the stability of motion, the steady-state solutions of the equations of motion are carried out. Based on the stability analyses, a new relation is obtained for the rollover threshold in terms of measurable response parameters. The presented criterion predicts the best time for the prevention of the vehicle rollover by applying a correcting moment. It is shown that the introduced threshold of vehicle rollover is a proper state of vehicle motion that is best for stabilising the vehicle with a low energy requirement.     

Contour line of load transfer ratio for vehicle rollover prediction

For vehicle rollover control systems, an accurate and predictive rollover index is necessary for a precise rollover threat detection and rollover prevention. In this paper, the contour line of load transfer ratio (CL-LTR) and the CL-LTR-based vehicle rollover index (CLRI) are proposed, describing LTR threshold and LTR change rate precisely, providing an accurate prediction of vehicle rollover threat. In detail, the CL-LTR is proposed via the roll dynamics phase plane analysis, and its analytical solution of one-degree-of-freedom vehicle roll model and extension for full vehicle are derived. Moreover, the predictive CLRI is proposed and evaluated via vehicle dynamics study. The results demonstrate that vehicle rollover threat is predicted accurately based on the CLRI, which shows benefits for the vehicle rollover prediction and stability control.     

State estimation in roll dynamics for commercial vehicles

Accurate lateral load transfer estimation plays an important role in improving the performance of the active rollover prevention system equipped in commercial vehicles. This estimation depends on the accurate prediction of roll angles for both the sprung and the unsprung subsystems. This paper proposes a novel computational method for roll-angle estimation in commercial vehicles employing sensors which are already used in a vehicle dynamic control system without additional expensive measurement units. The estimation strategy integrates two blocks. The first block contains a sliding-mode observer which is responsible for calculating the lateral tyre forces, while in the second block, the Kalman filter estimates the roll angles of the sprung mass and those of axles in the truck. The validation is conducted through MATLAB/TruckSim co-simulation. Based on the comparison between the estimated results and the simulation results from TruckSim, it can be concluded that the proposed estimation method has a promising tracking performance with low computational cost and high convergence speed. This approach enables a low-cost solution for the rollover prevention in commercial vehicles.     

Vehicle trajectory challenge in predictive active steering rollover prevention

High center of mass vehicles are likely to rollover in extreme maneuvers. Available works present control strategies to prevent rollover. In these works, however, other important parameters such as path trajectory tracking are not a main concern. In this paper conflicts between rollover prevention and trajectory tracking is investigated. Model predictive control (MPC) is adopted to predict and avoid rollover while tracking desired trajectory. For this regard a model based future error estimation is introduced. The control framework predicts both rollover and trajectory error simultaneously. It avoids rollover while tries to track the trajectory. Simulation results for two controllers with and without trajectory tracking are presented. The results indicate that the controllers effectively limit rollover as a hard constraint while the trajectory tracking controller also minimizes and recovers the path error.     

Path-following in model predictive rollover prevention using front steering and braking

In this paper vehicle path-following in the presence of rollover risk is investigated. Vehicles with high centre of mass are prone to roll instability. Untripped rollover risk is increased in high centre of gravity vehicles and high-friction road condition. Researches introduce strategies to handle the short-duration rollover condition. In these researches, however, trajectory tracking is affected and not thoroughly investigated. This paper puts stress on tracking error from rollover prevention. A lower level model predictive front steering controller is adopted to deal with rollover and tracking error as a priority sequence. A brake control is included in lower level controller which directly obeys an upper level controller (ULC) command. The ULC manages vehicle speed regarding primarily tracking error. Simulation results show that the proposed control framework maintains roll stability while tracking error is confined to predefined error limit.     

Practical vehicle rollover avoidance control using energy method

In this paper, a novel rollover prevention control algorithm is developed for application on vehicles with a high centre of gravity. The developed algorithm can be implemented on any vehicle equipped with an electronic stability program with or without an extra roll rate sensor. The vehicle rollover index is defined from the vehicle lateral kinetic energy and the new concept of virtual gravity. The algorithm is implemented on a production hydraulic control unit and tested using a typical medium size sport utility vehicle up to a speed of 110 km h^-1. The test results show that the control algorithm prevents the vehicle rollover very successfully without any noticeable false activation or over correction resulting in severe under steer. Also, the controlled wheel speed shows a very stable and smooth trace.     

半主动悬架的SIRMs模糊控制算法研究

文章以车身垂向振动速度、车身垂向振动加速度、悬架动行程和轮胎动位移为输入项目,主动悬架所产生的阻尼力F作为输出量,即设计一个包含4个输入项目和1个输出量的半主动SRIM模糊控制模型,并进行了凸起路面和随机路面下的仿真分析,计算结果显示该控制方法相对于半主动悬架经典控制方法有着更好的控制效果。     

主动悬架系统控制策略研究

文章设计一种主动悬架控制策略,通过建立四分之一车辆主动悬架系统模型,设计模糊滑模控制策略对主动悬架系统进行控制,并使用Matlab/Simulink软件对所建立的模型进行仿真分析。通过仿真结果验证了所建模型和控制策略的准确性,同时也改善了悬架系统的性能。