基于免疫算法的汽车主动悬架控制研究

应用免疫算法理论,以车身垂直加速度、悬架动行程和车轮动载为控制目标,设计了基于汽车1/4模型的主动悬架控制策略。该算法利用信息熵作为评价抗体亲和力的指标,具有多样识别能力、强鲁棒性和免疫记忆功能。仿真结果表明,基于免疫控制器的主动悬架对汽车的平顺性和操纵稳定性有较明显的改善。     

State observer-based sliding mode control for semi-active hydro-pneumatic suspension

This paper proposes an improved virtual reference model for semi-active suspension to coordinate the vehicle ride comfort and handling stability. The reference model combines the virtues of sky-hook with ground-hook control logic, and the hybrid coefficient is tuned according to the longitudinal and lateral acceleration so as to improve the vehicle stability especially in high-speed condition. Suspension state observer based on unscented Kalman filter is designed. A sliding mode controller (SMC) is developed to track the states of the reference model. The stability of the SMC strategy is proven by means of Lyapunov function taking into account the nonlinear damper characteristics and sprung mass variation of the vehicle. Finally, the performance of the controller is demonstrated under three typical working conditions: the random road excitation, speed bump road and sharp acceleration and braking. The simulation results indicated that, compared with the traditional passive suspension, the proposed control algorithm can offer a better coordination between vehicle ride comfort and handling stability. This approach provides a viable alternative to costlier active suspension control systems for commercial vehicles.     

汽车主动悬架的单神经元自适应控制

在1/4汽车动力学模型的基础上,设计了汽车主动悬架的自适应神经元控制器。以车辆的行驶平顺性为主要控制目标,车身垂直加速度、悬架动挠度、车轮动位移为具体评价参数,研究了系统在随机路面激励条件下的时域响应,计算了振动响应的均方根值,考察了在变参数条件下控制器的鲁棒性。仿真结果表明,该控制器能有效改善车辆的综合性能,尤其是平顺性和舒适性,并且具有较好的鲁棒性,对模型参数的变化有一定的适应性。     

汽车主动悬架与电动助力转向系统多目标优化及集成控制

建立了整车主动悬架和电动助力转向系统动力学模型,构建线性控制的主动悬架和PD控制的电动助力转向系统集成控制器,应用遗传算法对集成控制系统的结构参数和控制参数进行多目标优化。结果表明,经过多目标优化后的集成控制系统,既可保证车辆操纵轻便性,又显著提高了整车操纵稳定性、安全性和行驶平顺性。     

汽车主动悬架系统的自适应模糊控制方法

本文提出了一种汽车主动悬架系统的自适应模糊控制方法，该模糊控制方法可以有线自适应调整模糊控制的有关参数。1/4车辆模型作为系统仿真对象，模糊逻辑控制器可以显著发减小车辆的振动及干扰，提高车辆受路面激励时车辆的舒适性。仿真结果清楚地表明该模糊控制方法的有效性。另外，当主动悬架系统模型参数发生变化时该模糊控制器表现出良好的鲁棒性。     

A Two DOF Model for Jerk Optimal Vehicle Suspensions

Researchers have proposed various active suspension concepts to optimize the tradeoff between ride and handling in passenger vehicles. A few investigators suggested inclusion of the passenger jerk, the derivative of the passenger acceleration, as a measure of ride quality in the performance index. Minimization of a performance index then optimizes both the acceleration and jerk as well as other outputs representing handling quality and design constraints. This approach is called jerk optimal control.

This paper compares two different vehicle models of increasing complexity (the one and two DOF quarter car) using jerk optimal control. Different aspects of suspension performance are investigated, including the structure of the system transfer functions, the structure of the force control laws, and the tradeoffs between the various root mean square (rms) outputs defining system ride and handling performance. Tables compare the numerical results of the two models, allowing predictions of actual vehicle performance.

The results of the two models show the same basic trend for the tradeoff between ride and handling quality: at a constant level of rms passenger acceleration the rms passenger jerk can be reduced significantly, but only at a cost of increased rms tire deflections. In physical terms, a softer ride results in degraded handling performance. For a chosen level of ride improvement, the more realistic two DOF quarter car model predicts more severe degradation of handling. The latter nevertheless predicts a substantial increase in vehicle ride quality is possible through a 55% reduction in jerk. It is expected that actual suspensions could also produce significant increases in ride quality through jerk reduction. Jerk optimal suspensions could find use both in higher end passenger vehicles and in transports for vibration sensitive cargo.     

基于混合遗传算法的主动悬架集成优化研究

作者提出的主动悬架的集成优化方法是以主动悬架的结构参数与LQG控制器为优化对象,以主动悬架系统输出的车身垂直加速度、悬架动位移、轮胎动位移和主动控制力的加权和为优化性能指标。同时提出了一种混合优化算法,它利用梯度算法每次迭代得到的结果来改进遗传算法的群体,而用遗传算法的最优个体与梯度算法的迭代解相比较,选择其中的最优点作为梯度算法下一步迭代的初始点。运用该混合遗传算法进行主动悬架系统的集成优化控制能有效地提高汽车行驶平顺性和安全性。     

Structured H2 Optimization of Vehicle Suspensions Based on Multi-Wheel Models

Summary Various control techniques, especially LQG optimal control, have been applied to the design of active and semi-active vehicle suspensions over the past several decades. However passive suspensions remain dominant in the automotive marketplace because they are simple, reliable, and inexpensive. The force generated by a passive suspension at a given wheel can depend only on the relative displacement and velocity at that wheel, and the suspension parameters for the left and right wheels are usually required to be equal. Therefore, a passive vehicle suspension can be viewed as a decentralized feedback controller with constraints to guarantee suspension symmetry. In this paper, we cast the optimization of passive vehicle suspensions as structure-constrained LQG/H2 optimal control problems. Correlated road random excitations are taken as the disturbance inputs; ride comfort, road handling, suspension travel, and vehicle-body attitude are included in the cost outputs. We derive a set of necessary conditions for optimality and then develop a gradient-based method to efficiently solve the structure-constrained H2 optimization problem. An eight-DOF four-wheel-vehicle model is studied as an example to illustrate application of the procedure, which is useful for design of both passive suspensions and active suspensions with controller-structure constraints.     

Roll and pitch independently tuned interconnected suspension: modelling and dynamic analysis

In this paper, a roll and pitch independently tuned hydraulically interconnected passive suspension is presented. Due to decoupling of vibration modes and the improved lateral and longitudinal stability, the stiffness of individual suspension spring can be reduced for improving ride comfort and road grip. A generalised 14 degree-of-freedom nonlinear vehicle model with anti-roll bars is established to investigate the vehicle ride and handling dynamic responses. The nonlinear fluidic model of the hydraulically interconnected suspension is developed and integrated with the full vehicle model to investigate the anti-roll and anti-pitch characteristics. Time domain analysis of the vehicle model with the proposed suspension is conducted under different road excitations and steering/braking manoeuvres. The dynamic responses are compared with conventional suspensions to demonstrate the potential of enhanced ride and handling performance. The results illustrate the model-decoupling property of the hydraulically interconnected system. The anti-roll and anti-pitch performance could be tuned independently by the interconnected systems. With the improved anti-roll and anti-pitch characteristics, the bounce stiffness and ride damping can be optimised for better ride comfort and tyre grip.     

Modelling Combined Ride and Handling Manœuvres for a Vehicle with Slow-Active Suspension

SUMMARY

The computer modelling of vehicle ride and handling has been widely reported, but often only one or other of these functions is considered. This is especially true in the design of active suspension controllers, where the effects that improvements in the performance of one aspect have on the other are often not presented. This paper initially describes a combined ride and handling model for a large executive saloon fitted with a slow-active suspension. Separately derived ride and roll control strategies are combined and the effects on both ride and handling considered for straight running and various handling man?uvres on rough roads. The results are compared to the original passively suspended vehicle and the effect of running each strategy separately.     

汽车半主动悬架的模型参考自适应控制

在1／4车辆动力学模型的基础上，基于李雅普诺夫稳定性理论，以天棚阻尼半主动悬架为参考模型，设计了半主动悬架模型参考自适应控制器。自适应控制器包括可调前置控制器和状态反馈控制器两个部分。推导了自适应控制律与相应的约束条件。仿真结果表明：该控制器对于模型参数的不确定性具有良好的鲁棒特性。自适应控制器不仅明显降低了车身加速度，提高了平顺性，同时也使汽车的行驶安全性获得了改善，悬架动变形稍有增大。     

Development of Preview Active Suspension Control System and Performance Limit Analysis by Trajectory Optimization

The main role of the suspension system is to achieve ride comfort by reducing vibrations generated by the road roughness. The active damper is getting much attention due to its reduced cost and ability to enhance ride comfort especially when the road ahead is measurable by an environment sensor. In this study a preview active suspension control system was developed in order to improve ride comfort when the vehicle is passing over a speed bump. The control system consists of a feedback controller based on the skyhook logic and a feedforward controller for canceling out the road disturbance. The performance limit for the active suspension control system was computed via trajectory optimization to provide a measure against which to compare and validate the performance of the developed controller. The simulation results indicated that the controller of this study could enhance ride comfort significantly over the active suspension control system employing only the skyhook feedback control logic. Also the developed controller, by displaying similar control pattern as the trajectory optimization during significant time portions, proved that its control policy is legitimate.     

电液主动悬架滤波输出反馈控制器的设计及仿真实现

基于1／2车辆模型和非线性电液作动器，提出并详细设计了主动悬架滤波输出反馈控制器。整个主动悬架系统分解为内、外两个回路，外回路采用滤波输出反馈控制，大幅度衰减了车辆在高低频范围内的起伏和俯仰运动，提高了车辆的乘坐舒适性。内回路基于非线性作动器模型，采用传统的PI控制器，较好地跟踪输出了控制系统需要的作用力。此外，还对作动系统的摩擦力进行了详细建模。频域和时域仿真结果演示了主动悬架的良好性能并验证了结论。     

基于T-S模型的主动悬架保性能控制研究

建立了1/2车4自由度主动悬架的T-S模糊模型,提出了基于该模型的模糊保性能控制方案,并且针对含有参数不确定性的主动悬架系统进行了仿真。结果表明该方法能够取得较满意的控制效果,也证明了主动悬架系统在减少振动、提高汽车平顺性方面要优于被动悬架。     

Non-linear modelling and control of semi-active suspensions with variable damping

Electro-hydraulic dampers can provide variable damping force that is modulated by varying the command current; furthermore, they offer advantages such as lower power, rapid response, lower cost, and simple hardware. However, accurate characterisation of non-linear f–v properties in pre-yield and force saturation in post-yield is still required. Meanwhile, traditional linear or quarter vehicle models contain various non-linearities. The development of a multi-body dynamics model is very complex, and therefore, SIMPACK was used with suitable improvements for model development and numerical simulations. A semi-active suspension was built based on a belief–desire–intention (BDI)-agent model framework. Vehicle handling dynamics were analysed, and a co-simulation analysis was conducted in SIMPACK and MATLAB to evaluate the BDI-agent controller. The design effectively improved ride comfort, handling stability, and driving safety. A rapid control prototype was built based on dSPACE to conduct a real vehicle test. The test and simulation results were consistent, which verified the simulation.     

汽车主动悬架与电动助力转向系统自适应模糊集成控制

建立了包含转向运动模型、俯仰运动模型和侧倾运动模型的汽车整车模型,在设计了电动助力转向系统PD控制的基础上,构建了基于自适应模糊控制的汽车主动悬架与电动助力转向系统集成控制器,当控制系统偏差变小或变大时,调整因子总能保证系统稳定,便于工程应用。计算结果表明,该自适应模糊集成控制策略,既保证了车辆操纵轻便性,又显著提高了整车操纵稳定性、安全性和行驶平顺性等整车综合性能。     

DSP-based self-organising fuzzy controller for active suspension systems

This study proposed a self-organising fuzzy controller (SOFC) for controlling an active suspension system to evaluate its control performance. During the control process, the SOFC continually updated the learning strategy in the form of fuzzy rules. The fuzzy rule table of this SOFC could be initially set to zero. This not only overcame the difficulty in finding appropriate membership functions and control rules for designing a fuzzy controller, but also solved the database problem where the fuzzy rules of a fuzzy controller, once determined, remained fixed and could not suitably regulate them in real time to optimise the dynamic response of the system required to gain the desired control performance. To demonstrate the applicability of the proposed SOFC for active suspension systems, a quarter-car hydraulic-servo suspension system was designed and constructed to evaluate the feasibility of active suspension control. Additionally, to conform to real-time application requirements in the vehicular industry, the SOFC was implemented with a digital signal processor to control the hydraulic-servo suspension system so that the control performance could be determined. The SOFC has shown a better control performance in suppressing the vibration amplitude of the vehicle body for enhancing the structural safety of the vehicle and increasing the life of the suspension system. It also effectively suppressed the amplitude of the vehicle body acceleration and reduced the tire deflection for improving the ride and the handling quality of a vehicle better than a passive control, as verified in experimental results.     

汽车转向与悬架系统的集成控制研究

在建立了汽车转向与悬架系统的综合模型的基础上,运用一种具有扩展的调节器结构LQG控制方法,设计了 主动悬架控制器,实现对车身横摆角速度、车身垂直加速度、车身侧倾角和俯仰角的集成控制,从而显著提高汽车的 平顺性、操纵稳定性和安全性。     

A semi-active suspension control algorithm for vehicle comprehensive vertical dynamics performance

Comprehensive performance of the vehicle, including ride qualities and road-holding, is essentially of great value in practice. Many up-to-date semi-active control algorithms improve vehicle dynamics performance effectively. However, it is hard to improve comprehensive performance for the conflict between ride qualities and road-holding around the second-order resonance. Hence, a new control algorithm is proposed to achieve a good trade-off between ride qualities and road-holding. In this paper, the properties of the invariant points are analysed, which gives an insight into the performance conflicting around the second-order resonance. Based on it, a new control algorithm is proposed. The algorithm employs a novel frequency selector to balance suspension ride and handling performance by adopting a medium damping around the second-order resonance. The results of this study show that the proposed control algorithm could improve the performance of ride qualities and suspension working space up to 18.3% and 8.2%, respectively, with little loss of road-holding compared to the passive suspension. Consequently, the comprehensive performance can be improved by 6.6%. Hence, the proposed algorithm is of great potential to be implemented in practice.     

Active Suspension Control to Improve Vehicle Ride and Handling

In practice most active vehicle suspension work can be traced to two sources, Lotus' modal control and Karnopp's skyhook damper. A model is developed which allows comparison of different active suspension control algorithms. The Lotus modal control algorithm is reviewed, and compared with Karnopp's skyhook damper. It is shown that a tight inner closed loop allows the Lotus algorithm to achieve the inertial damping described by Kamopp for a single comer or quarter car. It is suggested that to achieve simultaneously high inertial damping and good disturbance rejection an inner force loop is desirable. A vehicle control scheme is presented which combines the Lotus modal decomposition with Karnopp's skyhook damper, allowing nearly optimal ride and simultaneously permitting modification of vehicle handling properties.