Economic and ecological optimization of electric bus charging considering variable electricity prices and CO2eq intensities

In many cities, diesel buses are being replaced by electric buses with the aim of reducing local emissions and thus improving air quality. The protection of the environment and the health of the population is the highest priority of our society. For the transport companies that operate these buses, not only ecological issues but also economic issues are of great importance. Due to the high purchase costs of electric buses compared to conventional buses, operators are forced to use electric vehicles in a targeted manner in order to ensure amortization over the service life of the vehicles. A compromise between ecology and economy must be found in order to both protect the environment and ensure economical operation of the buses.In this study, we present a new methodology for optimizing the vehicles’ charging time as a function of the parameters CO_2eq emissions and electricity costs. Based on recorded driving profiles in daily bus operation, the energy demands of conventional and electric buses are calculated for the passenger transportation in the city of Aachen in 2017. Different charging scenarios are defined to analyze the influence of the temporal variability of CO_2eq intensity and electricity price on the environmental impact and economy of the bus. For every individual day of a year, charging periods with the lowest and highest costs and emissions are identified and recommendations for daily bus operation are made. To enable both the ecological and economical operation of the bus, the parameters of electricity price and CO₂ are weighted differently, and several charging periods are proposed, taking into account the priorities previously set. A sensitivity analysis is carried out to evaluate the influence of selected parameters and to derive recommendations for improving the ecological and economic balance of the battery-powered electric vehicle.In all scenarios, the optimization of the charging period results in energy cost savings of a maximum of 13.6% compared to charging at a fixed electricity price. The savings potential of CO_2eq emissions is similar, at 14.9%. From an economic point of view, charging between 2 a.m. and 4 a.m. results in the lowest energy costs on average. The CO_2eq intensity is also low in this period, but midday charging leads to the largest savings in CO_2eq emissions. From a life cycle perspective, the electric bus is not economically competitive with the conventional bus. However, from an ecological point of view, the electric bus saves on average 37.5% CO_2eq emissions over its service life compared to the diesel bus. The reduction potential is maximized if the electric vehicle exclusively consumes electricity from solar and wind power.     

Life cycle ownership cost and environmental externality of alternative fuel options for transit buses

This paper assesses alternative fuel options for transit buses. We consider the following options for a 40-foot and a 60-foot transit bus: a conventional bus powered by either diesel or a biodiesel blend (B20 or B100), a diesel hybrid-electric bus, a sparking-ignition bus powered by Compressed Natural Gas (CNG) or Liquefied Natural Gas (LNG), and a battery electric bus (BEB) (rapid or slow charging). We estimate life cycle ownership costs (for buses and infrastructure) and environmental externalities caused by greenhouse gases (GHGs) and criteria air pollutants (CAPs) emitted from the life cycle of bus operations. We find that all alternative fuel options lead to higher life cycle ownership and external costs than conventional diesel. When external funding is available to pay for 80% of vehicle purchase expenditures (which is usually the case for U.S. transit agencies), BEBs yield large reductions (17–23%) in terms of ownership and external costs compared to diesel. Furthermore, BEBs’ advantages are robust to changes in operation and economic assumptions when external funding is available. BEBs are able to reduce CAP emissions significantly in Pittsburgh’s hotspot areas, where existing bus fleets contribute to 1% of particulate matter emissions from mobile sources. We recognize that there are still practical barriers for BEBs, e.g. range limits, land to build the charging infrastructure, and coordination with utilities. However, favorable trends such as better battery performance and economics, cleaner electricity grid, improved technology maturity, and accumulated operation experience may favor use of BEBs where feasible.     

Numerical analysis of electric bus fast charging strategies for demand charge reduction

Electric transit buses have been recognized as an important alternative to diesel buses with many environmental benefits. Electric buses employing lithium titanate batteries can provide uninterrupted transit service thanks to their ability of fast charging. However, fast charging may result in high demand charges which will increase the fuel costs thereby limiting the electric bus market penetration. In this paper, we simulated daily charging patterns and demand charges of a fleet of electric buses in Tallahassee, Florida and identified an optimal charging strategy to minimize demand charges. It was found that by using a charging threshold of 60–64%, a $160,848 total saving in electricity cost can be achieved for a five electric bus fleet, comparing to a charging threshold of 0–28%. In addition, the impact of fleet sizes on the fuel cost was investigated. Fleets of 4 and 12 buses will achieve the lowest cost per mile driven when one fast charger is installed.     

Optimizing bus-size and headway in transit networks

Optimization models for calculating the best size for passenger carrying vehicles in urban areas were popular during the 1980s. These studies were abandoned in the ‘90s concluding that it was more efficient to use smaller buses at higher frequencies. This article returns to this controversial question, starting from the point of view that any calculation of bus size can only be made after considering the demand for each of the routes on the system. Therefore, an optimization model for sizing the buses and setting frequencies on each route in the system is proposed in accordance with the premises detailed below. The proposed model is a bi-level optimization model with constraints on bus capacity. The model allows buses of different sizes to be assigned to public transport routes optimizing the headways on each route in accordance with observed levels of demand. At the upper level the model considers the optimization of the system’s social and operating costs, these are understood to be the sum of the user’s and operator’s costs. At the lower level there is an assignment model for public transport with constraints on vehicle capacity which balances the flows for bus sizes and headways at each iteration. By graphically representing the results of the model applied to a real case, a series of useful conclusions are reached for the management and planning of a fleet of public transport vehicles.     

The transition to zero-emission buses in public transport – The need for institutional innovation

Zero-emission buses (ZEBs) are considered a vital element in the transition to a more sustainable (urban) transport system. Both battery-electric and hydrogen fuel cell buses do however face significant barriers to large-scale implementation. These barriers, e.g. high investment costs and limited driving range, are generally regarded as exogenous technological barriers which are beyond the sphere of influence of actors in the public transport sector. In this paper we question this assumption and therefore we look at the role of institutions in public bus transport. Based on a series of interviews with stakeholders in the Dutch public transport sector we argue that various regulative, normative, and cognitive institutions discourage the use of zero-emission buses in public transport. We conclude with several suggestions for institutional innovation to increase the chances for these buses.     

Energy consumption and cost-benefit analysis of hybrid and electric city buses

This paper presents a cost-benefit analysis (CBA) of hybrid and electric city buses in fleet operation. The analysis is founded on an energy consumption analysis, which is carried out on the basis of extensive simulations in different bus routes. A conventional diesel city bus is used as a reference for the CBA. Five different full size hybrid and electric city bus configurations were considered in this study; two parallel and two series hybrid buses, and one electric city bus. Overall, the simulation results indicate that plug-in hybrid and electric city buses have the best potential to reduce energy consumption and emissions. The capital and energy storage system costs of city buses are the most critical factors for improving the cost-efficiency of these alternative city bus configurations. Furthermore, the operation schedule and route planning are important to take into account when selecting hybrid and electric city buses for fleet operation.     

Local environmental impact assessment as decision support for the introduction of electromobility in urban public transport systems

The urban transport sector offers a noteworthy potential for the reduction of national greenhouse gas emissions as well as local pollutant emissions such as nitrogen oxides and particulate matter if electric drive systems are increasingly used. Owing to the fact that electric busses are still in the development phase, higher investment costs have evolved for public transport providers. Hence, decision making about where to introduce electric bus lines is mainly characterized by economic as well as technological considerations. The integration of local or regional ecological aspects is often neglected. An interdisciplinary approach was applied to the bus network of an urban public transport provider. By combining spatial-analytical techniques and statistical methods, the local environmental relief potential of electric busses has been evaluated. The results show that due to their specific line characteristics and the frequency of service, two bus lines out of 28 are particularly suitable for the introduction of electromobility in Dresden, Germany. The presented scientific work contributes to the extension of environmental assessments and decision making tools by including the spatial dimension of environmental impacts. It increases the practical relevance, especially for management decisions of political and entrepreneurial stakeholders by providing a sensible decision basis for local or regional infrastructure projects.     

Modeling charging infrastructure impact on the electric vehicle market in China

The plug-in electric vehicle (PEV) is deemed as a critical technological revolution, and the governments are imposing various vehicle policies to promote its development. Meanwhile, the market success of PEVs depends on many aspects. This study integrates one’s use of charging infrastructure at home, public place and workplace into the market dynamics analysis tool, New Energy and Oil Consumption Credits (NEOCC) model, to systematically assess the charging infrastructure (home parking ratio, public charging opportunity, and charging costs) impact on PEV ownership costs and analyze how the PEV market shares may be affected by the attributes of the charging infrastructure. Compared to the charging infrastructure, the impact of battery costs is incontrovertibly decisive on PEV market shares, the charging infrastructure is still non-negligible in the PEV market dynamics. The simulation results find that the public charging infrastructure has more effectiveness on promoting the PEV sales in the PEV emerging market than it does in the PEV mature market. However, the improvement of charging infrastructure does not necessarily lead to a larger PEV market if the charging infrastructure incentives do not coordinate well with other PEV policies. Besides, the increase of public charging opportunities has limited motivations on the growth of public PEV fleets, which are highly correlated to the number of public fast charging stations or outlets. It also finds that more home parking spaces can stimulate more sales of personal plug-in hybrid electric vehicles instead of personal battery electric vehicles.     

A cost-competitiveness analysis of charging infrastructure for electric bus operations

This study investigates the cost competitiveness of different types of charging infrastructure, including charging stations, charging lanes (via charging-while-driving technologies) and battery swapping stations, in support of an electric public transit system. To this end, we first establish mathematical models to investigate the optimal deployment of various charging facilities along the transit line and determine the optimal size of the electric bus fleet, as well as their batteries, to minimize total infrastructure and fleet costs while guaranteeing service frequency and satisfying the charging needs of the transit system. We then conduct an empirical analysis utilizing available real-world data. The results suggest that: (1) the service frequency, circulation length, and operating speed of a transit system may have a great impact on the cost competitiveness of different charging infrastructure; (2) charging lanes enabled by currently available inductive wireless charging technology are cost competitive for most of the existing bus rapid transit corridors; (3) swapping stations can yield a lower total cost than charging lanes and charging stations for transit systems with high operating speed and low service frequency; (4) charging stations are cost competitive only for transit systems with very low service frequency and short circulation; and (5) the key to making charging lanes more competitive for transit systems with low service frequency and high operating speed is to reduce their unit-length construction cost or enhance their charging power.     

Bus congestion, optimal infrastructure investment and the choice of a fare collection system in dedicated bus corridors

Microeconomic optimisation of scheduled public transport operations has traditionally focused on finding optimal values for the frequency of service, capacity of vehicles, number of lines and distance between stops. In addition, however, there exist other elements in the system that present a trade-off between the interests of users and operators that have not received attention in the literature, such as the optimal selection of a fare payment system and a designed running speed (i.e., the cruising speed that buses maintain in between two consecutive stops). Alternative fare payment methods (e.g., on-board and off-board, payment by cash, magnetic strip or smart card) have different boarding times and capital costs, with the more efficient systems such as a contactless smart card imposing higher amounts of capital investment. Based on empirical data from several Bus Rapid Transit systems around the world, we also find that there is a positive relationship between infrastructure cost per kilometre and commercial speed (including stops), achieved by the buses, which we further postulate as a linear relationship between infrastructure investment and running speed. Given this context, we develop a microeconomic model for the operation of a bus corridor that minimises total cost (users and operator) and has five decision variables: frequency, capacity of vehicles, station spacing, fare payment system and running speed, thus extending the traditional framework. Congestion, induced by bus frequency, plays an important role in the design of the system, as queues develop behind high demand bus stops when the frequency is high. We show that (i) an off-board fare payment system is the most cost effective in the majority of circumstances; (ii) bus congestion results in decreased frequency while fare and bus capacity increase, and (iii) the optimal running speed grows with the logarithm of demand.     

Enhanced bus operations: The Curitiba model and its applicability to China

Buses will remain the backbone of public transport systems for some time to come because of their lower cost and higher flexibility in relation to rail transport. However, buses are perceived as being an inferior mode of public transport and do not offer as much carrying capacity as rail transport. Following the Curitiba model, this paper looks at the potential for transferring some of the key advantages of rail transport to bus operations. This involves transforming bus stops into enclosed stations, with ticket purchase and/or checking in the station and at‐grade access to vehicles. It also involves the extensive use of bus lanes. The potential contribution of transport telematics is looked at, in particular the use of smartcards for payment in a closed fare system. The potential role of the Curitiba model for China is assessed in the context of toll road construction.     

Energy use in personal rapid transit building and running personal rapid transit in Sweden

Travel by a Personal Rapid Transit (PRT) system may be much more energy efficient than travel by conventional road transport. The difference could be so large that the energy invested in the PRT infrastructure may be equivalent to the fuel that is saved by previous car and bus riders in less than five years. We analyzed the propulsion energy requirements of a PRT system and made a first-order calculation of the energy cost of the infrastructure and maintenance. Operation of the PRT requires only half the energy required by buses and a quarter of the energy used by passenger cars per passenger kilometer. The energy used to build the PRT infrastructure in a city may be recovered in five years if 10% of the car drivers switch to the PRT.     

Charging infrastructure demands of shared-use autonomous electric vehicles in urban areas

Ride-hailing is a clear initial market for autonomous electric vehicles (AEVs) because it features high vehicle utilization levels and strong incentive to cut down labor costs. An extensive and reliable network of recharging infrastructure is the prerequisite to launch a lucrative AEV ride-hailing fleet. Hence, it is necessary to estimate the charging infrastructure demands for an AEV fleet in advance. This study proposes a charging system planning framework for a shared-use AEV fleet providing ride-hailing services in urban area. We first adopt an agent-based simulation model, called BEAM, to describe the complex behaviors of both passengers and transportation systems in urban cities. BEAM simulates the driving, parking and charging behaviors of the AEV fleet with range constraints and identifies times and locations of their charging demands. Then, based on BEAM simulation outputs, we adopt a hybrid algorithm to site and size charging stations to satisfy the charging demands subject to quality of service requirements. Based on the proposed framework, we estimate the charging infrastructure demands and calculate the corresponding economics and carbon emission impacts of electrifying a ride-hailing AEV fleet in the San Francisco Bay Area. We also investigate the impacts of various AEV and charging system parameters, e.g., fleet size, vehicle battery capacity and rated power of chargers, on the ride-hailing system’s overall costs.     

Performance evaluation and obstacle factors analysis of urban public transport priority

ABSTRACT

Through the comprehensive consideration of four subsystems – overall development level, infrastructure construction, public transportation service level and policy support – an index system of public transport priority performance evaluation is established. A performance evaluation of bus priority implementation in Wuhan City from 2007 to 2016 is carried out by applying the difference coefficient CRITIC-TOPSIS model. The obstacle factor model is also used to diagnose the factors affecting the priority performance of urban public transport. The research results show that, during this decade, the comprehensive performance of Wuhan City’s public transport priority developed from poor to medium, then to good and finally to excellent. The overall development level and infrastructure construction performance subsystems have the highest obstacle degree, followed by public transportation service levels and policy support performance subsystems. The research idea and method of this paper provide a realistic basis for promoting the priority performance of urban public transport.     

Within-day recharge of plug-in hybrid electric vehicles: Energy impact of public charging infrastructure

This paper examines the role of public charging infrastructure in increasing the share of driving on electricity that plug-in hybrid electric vehicles might exhibit, thus reducing their gasoline consumption. Vehicle activity data obtained from a global positioning system tracked household travel survey in Austin, Texas, is used to estimate gasoline and electricity consumptions of plug-in hybrid electric vehicles. Drivers’ within-day recharging behavior, constrained by travel activities and public charger availability, is modeled. It is found that public charging offers greater fuel savings for hybrid electric vehicles s equipped with smaller batteries, by encouraging within-day recharge, and providing an extensive public charging service is expected to reduce plug-in hybrid electric vehicles gasoline consumption by more than 30% and energy cost by 10%, compared to the scenario of home charging only.     

Environmental life-cycle assessment of transit buses with alternative fuel technology

The paper presents a life-cycle assessment of costs and greenhouse gas emissions for transit buses deploying a hybrid input-output model to compare ultra-low sulfur diesel to hybrid diesel-electric, compressed natural gas, and hydrogen fuel-cell. We estimate the costs of emissions reductions from alternative fuel vehicles over the life cycle and examine the sensitivity of the results to changes in fuel prices, passenger demand, and to technological characteristics influencing performance and emissions. We find that the alternative fuel buses reduce operating costs and emissions, but increase life-cycle costs. The infrastructure requirement to deploy and operate alternative fuel buses is critical in the comparison of life-cycle emissions. Additionally, efficient bus choice is sensitive to passenger demand, but only moderately sensitive to technological characteristics, and that the relative efficiency of compressed natural gas buses is more sensitive to changes in fuel prices than that of the other bus types.     

Smart charging management for shared autonomous electric vehicle fleets: A Puget Sound case study

Increasingly, experts are forecasting the future of transportation to be shared, autonomous and electric. As shared autonomous electric vehicle (SAEV) fleets roll out to the market, the electricity consumed by the fleet will have significant impacts on energy demand and, in turn, drive variation in energy cost and reliability, especially if the charging is unmanaged. This research proposes a smart charging (SC) framework to identify benefits of active SAEV charging management that strategically shifts electricity demand away from high-priced peak hours or towards renewable generation periods. Time of use (TOU), real time pricing (RTP), and solar generation electricity scenarios are tested using an agent-based simulation to study (1) the impact of battery capacity and charging infrastructure type on SAEV fleet performance and operational costs under SC management; (2) the cost reduction potential of SC considering energy price fluctuation, uncertainty, and seasonal variation; (3) the charging infrastructure requirements; and (4) the system efficiency of powering SAEVs with solar generation. A case study from the Puget Sound region demonstrates the proposed SC algorithm using trip patterns from the regional travel demand model and local energy prices. Results suggest that in the absence of electricity price signals, SAEV charging demand is likely to peak the evening, when regional electricity use patterns already indicate high demand. Under SC management, EVs with larger battery sizes are more responsive to low-electricity cost charging opportunities, and have greater potential to reduce total energy related costs (electricity plus charging infrastructure) for a SAEV fleet, especially under RTP structure.     

Charging infrastructure planning for promoting battery electric vehicles: An activity-based approach using multiday travel data

This paper studies electric vehicle charger location problems and analyzes the impact of public charging infrastructure deployment on increasing electric miles traveled, thus promoting battery electric vehicle (BEV) market penetration. An activity-based assessment method is proposed to evaluate BEV feasibility for the heterogeneous traveling population in the real world driving context. Genetic algorithm is applied to find (sub)optimal locations for siting public charging stations. A case study using the GPS-based travel survey data collected in the greater Seattle metropolitan area shows that electric miles and trips could be significantly increased by installing public chargers at popular destinations, with a reasonable infrastructure investment.     

An analysis of public bus transit performance in Indian cities

Maintaining and enhancing public transit service in Indian cities is important, to meet rapidly growing mass mobility needs, and curb personal motor vehicle activity and its impacts at low cost. Indian cities rely predominantly on buses for public transport, and are likely to continue to do so for years. However, the public bus transit service is inadequate, and unaffordable for the urban poor. The paper explores the factors that contribute to and affect efforts to improve this situation, based on an analysis of the financial and operational performance of the public bus transit service in the four metropolitan centres and four secondary cities during the 1990s. Overall, there were persistent losses, owing to increasing input costs and declining productivity. The losses occurred despite rapidly increasing fares, and ridership declined. The situation, and the ability to address it, is worse in the secondary cities than the metropolitan centres. We suggest a disaggregated approach based on the needs and motivations of different groups in relation to public transit, along with improved operating conditions and policies to internalize costs of personal motor vehicle use, to address the challenge of providing financially viable and affordable public bus transit service.     

Modeling the interaction between buses,passengers and cars on a bus route using a multi-agent system

This paper models part of a public transport network (PTN), specifically, a bus route, as a small-size multi-agent system (MAS). The proposed approach is applied to a case study considering a ‘real world’ bus line within the PTN in Auckland, New Zealand. The MAS-based analysis uses modeling and simulation to examine the characteristics of the observed system – autonomous agents interacting with one another – under different scenarios, considering bus capacity and frequency of service for existing and projected public transport (PT) demand. A simulation model of a bus route is developed, calibrated and validated. Several results are attained, such as when the PT passenger load is not close to bus capacity, this load has no effect on average passenger waiting time at bus stops. The model proposed can be useful to practitioners as a tool to model the interaction between buses and other agents.