Estimating potential increases in travel with autonomous vehicles for the non-driving,elderly and people with travel-restrictive medical conditions

Automated vehicles represent a technology that promises to increase mobility for many groups, including the senior population (those over age 65) but also for non-drivers and people with medical conditions. This paper estimates bounds on the potential increases in travel in a fully automated vehicle environment due to an increase in mobility from the non-driving and senior populations and people with travel-restrictive medical conditions. In addition, these bounding estimates indicate which of these demographics could have the greatest increases in annual vehicle miles traveled (VMT) and highlight those age groups and genders within these populations that could contribute the most to the VMT increases. The data source is the 2009 National Household Transportation Survey (NHTS), which provides information on travel characteristics of the U.S. population. The changes to light-duty VMT are estimated by creating and examining three possible travel demand wedges. In demand wedge one, non-drivers are assumed to travel as much as the drivers within each age group and gender. Demand wedge two assumes that the driving elderly (those over age 65) without medical conditions will travel as much as a younger population within each gender. Demand wedge three makes the assumption that working age adult drivers (19–64) with medical conditions will travel as much as working age adults without medical conditions within each gender, while the driving elderly with medical any travel-restrictive conditions will travel as much as a younger demographic within each gender in a fully automated vehicle environment. The combination of the results from all three demand wedges represents an upper bound of 295 billion miles or a 14% increase in annual light-duty VMT for the US population 19 and older. Since traveling has other costs besides driving effort, these estimates serve to bound the potential increase from these populations to inform the scope of the challenges, rather than forecast specific VMT scenarios.     

Long distance truck tracking from advanced point detectors using a selective weighted Bayesian model

Truck flow patterns are known to vary by season and time-of-day, and to have important implications for freight modeling, highway infrastructure design and operation, and energy and environmental impacts. However, such variations cannot be captured by current truck data sources such as surveys or point detectors. To facilitate development of detailed truck flow pattern data, this paper describes a new truck tracking algorithm that was developed to estimate path flows of trucks by adopting a linear data fusion method utilizing weigh-in-motion (WIM) and inductive loop point detectors. A Selective Weighted Bayesian Model (SWBM) was developed to match individual vehicles between two detector locations using truck physical attributes and inductive waveform signatures. Key feature variables were identified and weighted via Bayesian modeling to improve vehicle matching performance. Data for model development were collected from two WIM sites spanning 26 miles in California where only 11 percent of trucks observed at the downstream site traversed the whole corridor. The tracking model showed 81 percent of correct matching rate to the trucks declared as through trucks from the algorithm. This high accuracy showed that the tracking model is capable of not only correctly matching through vehicles but also successfully filtering out non-through vehicles on this relatively long distance corridor. In addition, the results showed that a Bayesian approach with full integration of two complementary detector data types could successfully track trucks over long distances by minimizing the impacts of measurement variations or errors from the detection systems employed in the tracking process. In a separate case study, the algorithm was implemented over an even longer 65-mile freeway section and demonstrated that the proposed algorithm is capable of providing valuable insights into truck travel patterns and industrial affiliation to yield a comprehensive truck activity data source.     

Linking land use with household vehicle emissions in the central puget sound: methodological framework and findings

A leading cause of air pollution in many urban regions is mobile source emissions that are largely attributable to household vehicle travel. While household travel patterns have been previously related with land use in the literature (Crane, R., 1996. Journal of the American Planning Association 62 (1, Winter); Cervero, R. and Kockelman, C., 1997. Transportation Research Part D 2 (3), 199–219), little work has been conducted that effectively extends this relationship to vehicle emissions. This paper describes a methodology for quantifying relationships between land use, travel choices, and vehicle emissions within the Seattle, Washington region. Our analysis incorporates land use measures of density and mix which affect the proximity of trip origins to destinations; a measure of connectivity which impacts the directness and completeness of pedestrian and motorized linkages; vehicle trip generation by operating mode; vehicle miles/h of travel and speed; and estimated household vehicle emissions of nitrogen oxides, volatile organic compounds, and carbon monoxide. The data used for this project consists of the Puget Sound Transportation Panel Travel Survey, the 1990 US Census, employment density data from the Washington State Employment Security Office, and information on Seattle’s vehicle fleet mix and climatological attributes provided by the Washington State Department of Ecology. Analyses are based on a cross-sectional research design in which comparisons are made of variations in household travel demand and emissions across alternative urban form typologies. Base emission rates from MOBILE5a and separate engine start rates are used to calculate total vehicle emissions in grams accounting for fleet characteristics and other inputs reflecting adopted transportation control measures. Emissions per trip are based on the network distance of each trip, average travel speed, and a multi-stage engine operating mode (cold start, hot start, and stabilized) function.     

How reliable is the bureau of motor carrier safety truck accident data?

This paper examines the degree of compliance with the accident reporting requirements imposed by the Bureau of Motor Carrier Safety (BMCS) of the U.S. Department of Transportation on motor carriers involved in interstate and foreign transport. It also examines the reliability and validity of the accident information reported by these carriers to the BMCS. The study shows that there is a high degree of accident underreporting, especially by the private and exempt carriers, and that the information reported on variables such as cargo weight, gross vehicle weights, and usage of seat belts at the time of accident, is biased toward the interests of the reporters of the accidents.     

What neighborhood are you in? Empirical findings of relationships between household travel and neighborhood characteristics

In recent years, there have been studies of the influence of neighborhood or built environment characteristics on residential location choice and household travel behavior. Interestingly, there is no uniform definition of neighborhood in the literature and the definition is often vague. This paper presents an alternative way of defining neighborhood and neighborhood type, which involves innovative usage of public data sources. Furthermore, the paper investigates the interaction between neighborhood environment and household travel in the US. A neighborhood here is spatially identical to a census tract. A neighborhood type identifies a group of neighborhoods with similar neighborhood socio-economic, demographic, and land use characteristics. This is accomplished by performing log-likelihood clustering on the Census Transportation Planning Package (CTPP) 2000 data. Five household travel measures, i.e., number of trips per household, mode share, average travel distance and time per trip, and vehicle miles of travel (VMT), are then compared across the resulting 10 neighborhood types, using the 2001 National Household Travel Survey (NHTS) household and trip files. It is found that household life cycle status and residential location are not independent. Transit availability at place of residence tends to increase the transit mode share regardless of household automobile ownership and income level, and job-housing trade-offs are evident when mobility is not of concern. The study also reveals racial preference in residential location and contrasting travel characteristics among ethnic groups.

Small area estimation of vehicle ownership and use

A national model of vehicle ownership and use is developed for the USA. Decisions about the number of cars owned by households and the annual miles traveled are jointly modeled using a discrete–continuous probit model, which has been estimated on the 2009 National Household Travel Survey (NHTS) data. The model system covers four Census Regions (Northeast, Midwest, South and West) and three area types (urbanized area, urban clusters and rural). Models’ estimates have been applied to data extracted from the American Community Survey (ACS) to forecast household vehicle demand at county level. Results show that the national models are transferable to small areas with different geographical and socio-demographic characteristics.     

Analysis of Metropolitan Highway Capacity and the growth in vehicle miles of travel

A number of recent studies have examined the hypothesis of induced travel in an attempt to quantify the phenomenon (Hansen & Huang 1997; Noland, forthcoming). No study has yet attempted to adjust for potential simultaneity bias in the results. This study addresses this issue by the use of an instrumental variable (two stage least squares) approach. Metropolitan level data compiled by the Texas Transportation Institute for their annual congestion report is used in the analysis and urbanized land area is used as an instrument for lane miles of capacity. While this is not an ideal instrument, results still suggest a strong causal relationship but probably that most previous work has had an upward bias in the coefficient estimates. The effect of lane mile additions on VMT growth is forecast and found to account for about 15% of annual VMT growth with substantial variation between metropolitan areas. This effect appears to be closely correlated with percent growth in lane miles, suggesting that rapidly growing areas can attribute a greater share of their VMT growth to growth in lane miles.     

What will autonomous trucking do to U.S. trade flows? Application of the random-utility-based multi-regional input–output model

Transportation - This study anticipates changes in U.S. highway and rail trade patterns following widespread availability of self-driving or autonomous trucks (Atrucks). It uses a...     

True Walking Distance to Transit

Abstract

People riding transit in the city of Detroit walk on average 0.8 miles (1.3 km) per round trip. The straight-line walking distance was found by buffering the bus stop locations and comparing them to the weighted US Census blocks. However, the true walking path follows the street pattern. Rather than undertaking network analysis, which would require connecting all addresses in the city with all bus stops, a Monte Carlo simulation was performed in geographic information system with random addresses. The simulation was performed over several addresses until convergence was achieved. The distances were converted to walking times and compared to the US National Household Transportation Survey.     

Estimating vehicle miles traveled (VMT) in urban areas using regression kriging

The recent increase in demand for performance‐driven and outcome‐based transportation planning makes accurate and reliable performance measures essential. Vehicle miles traveled (VMT), the total miles traveled by all vehicles on roadways, has been utilized widely as a proxy for traffic impact assessment, vehicle emissions, gasoline consumption, and crashes. Accordingly, a number of studies estimate VMT using diverse data sources. This study estimates VMT in the urban area of Bucheon, South Korea, by predicting the annual average daily traffic for unmeasured locations using spatial interpolation techniques (i.e., regression kriging and linear regression). The predictive performance of this method is compared with that of the existing Highway Performance Monitoring System (HPMS) method. The results show that regression kriging could provide more accurate VMT estimates than the HPMS method and linear regression, especially with a small sample size. Copyright © 2016 John Wiley & Sons, Ltd.     

How do they get by without cars? An analysis of travel characteristics of carless households in California

Transportation - In spite of their substantial number in the U.S., our understanding of the travel behavior of households who do not own motor vehicles (labeled “carless” herein) is...     

Assessing the energy and greenhouse gas emissions mitigation effectiveness of potential US modal freight policies

This paper estimates the total embodied energy and emissions modal freight requirements across the supply chain for each of over 400 sectors using Bureau of Transportation Statistics Commodity Flow Survey data and Bureau of Economic Analysis economic input-output tables for 2002. Across all sectors, direct domestic truck and rail transportation are similar in magnitude for embodied freight transportation of goods and services in terms of ton-km. However, the sectors differ significantly in energy consumption, greenhouse gas emissions, and costs per ton-km. Recent pressure to reduce energy consumption and emissions has motivated a search for more efficient freight mode choices. One solution would be to shift freight transportation away from modes that require more energy and emit more (e.g., truck) to modes that consume and emit less (e.g., rail and water).Our results show there are no individual sectors for which targeting changes would significantly decrease the total freight transportation energy and emissions, therefore we have also looked at the prospect of policies encouraging many sectors to shift modes. There are four scenarios analyzed: (1) shifting all truck to rail, shifting top 20% sector mode choice, (2) based on their emissions, (3) based on a multi-attribute analysis, and (4) increasing truck efficiency (e.g., mpg). Increasing truck efficiency by 10% results in similar energy and emissions reductions (approximately 7% for energy and 6% for emissions) as targeting the top 20% of sectors when selected based on emissions, whereas selecting the top 20% based on availability to shift from truck results in slightly less reductions of energy and emissions. Implementing policies to encourage higher efficiency in freight trucks may be a sufficient short term goal while efforts to reduce truck freight transportation through sectoral policies are implemented in the long term.     

Small area estimates of daily person-miles of travel: 2001 National Household Transportation Survey

The National Household Transportation Survey (NHTS) was designed at the national level, and for most states it does not have a large enough sample to produce reliable estimates, especially for subdomains (e.g., age groups) within a state. Using the 2001 NHTS, we produced small area estimates (SAEs) of the percentage of persons among four age groups (17 or younger, 18–39, 40–54, and 55 or older) having high daily person-miles of travel (more than 87.5 miles a day, which is the 90th percentile for daily person-miles traveled) and associated prediction intervals for all 50 states and the District of Columbia. The survey weighted hierarchical Bayes (Folsom et al., Proc of the Sect on Surv Res Methods of the Am Stat Assoc 371–375, 1999) small area estimation (SAE) methodology was used to produce state-level SAEs. This paper describes the methodology and shows that SAE can be an effective technique for producing reliable state-level estimates from large, national surveys like the NHTS. In particular, the prediction interval relative widths for SAEs were, on average, 31–48% narrower than the corresponding design-based confidence interval widths, whereas for small states the reduction was around 47–63%.     

New approaches to transportation forecasting models

In 1992, the Federal Highway Administration awarded small research contracts to four teams of transportation researchers to design alternative approaches for improving the urban travel demand forecasting process. The purpose of these contracts was to enable each research team to explain how transportation planning models could and should be improved to meet the new forecasting requirements brought on by recent legislation, to address the impacts of new transportation technology, and to exploit the travel behavior theories and methodologies that have developed over the past two decades.This paper presents a summary and synthesis of the ideas which emerged from the four research reports. Its purpose is to identify common themes suggested by several of the research teams, to point out what appear to be critical elements missing from some approaches, and to combine the best aspects of the four approaches into a research plan for improving the current generation of travel demand models.Abbreviations CAAA Clean Air Act Amendments - FHWA Federal Highway Administration - GIS Geographic Information System - IIA Independence of Irrelevant Alternatives - IT Information Technology - IVHS Intelligent Vehicle Highway System - SUE Stochastic User Equilibrium - TCM Transportation Control Measures - UTPS Urban Transportation Planning System - VMT Vehicle Miles of Travel The paper was prepared as a report for the Federal Highway Administration.     

Time use in travel surveys and time use surveys – Two sides of the same coin?

An in-depth understanding of travel behaviour determinants, including the relationship to non-travel activities, is the foundation for modelling and policy making. National Travel Surveys (NTS) and time use surveys (TUS) are two major data sources for travel behaviour and activity participation. The aim of this paper is to systematically compare both survey types regarding travel activities and non-travel activities. The analyses are based on the German National Travel Survey and the German National Time Use Survey from 2002.The number of trips and daily travel time for mobile respondents were computed as the main travel estimates. The number of trips per person is higher in the German TUS when changes in location without a trip are included. Location changes without a trip are consecutive non-trip activities with different locations but without a trip in-between. The daily travel time is consistently higher in the German TUS. The main reason for this difference is the 10-min interval used. Differences in travel estimates between the German TUS and NTS result from several interaction effects. Activity time in NTS is comparable with TUS for subsistence activities.Our analyses confirm that both survey types have advantages and disadvantages. TUS provide reliable travel estimates. The number of trips even seems preferable to NTS if missed trips are properly identified and considered. Daily travel times are somewhat exaggerated due to the 10-min interval. The fixed time interval is the most important limitation of TUS data. The result is that trip times in TUS do not represent actual trip times very well and should be treated with caution.We can use NTS activity data for subsistence activities between the first trip and the last trip. This can potentially benefit activity-based approaches since most activities before the first trip and after the last trip are typical home-based activities which are rarely substituted by out-of-home activities.     

Analysis of plug-in hybrid electric vehicles’ utility factors using GPS-based longitudinal travel data

The benefit of using a PHEV comes from its ability to substitute gasoline with electricity in operation. Defined as the proportion of distance traveled in the electric mode, the utility factor (UF) depends mostly on the battery capacity, but also on many other factors, such as travel pattern and recharging pattern. Conventionally, the UFs are calculated based on the daily vehicle miles traveled (DVMT) by assuming motorists leave home in the morning with a full battery, and no charge occurs before returning home in the evening. Such an assumption, however, ignores the impact of the heterogeneity in both travel and charging behavior, such as going back home more than once in a day, the impact of available charging time, and the price of gasoline and electricity. Moreover, the conventional UFs are based on the National Household Travel Survey (NHTS) data, which are one-day travel data of each sample vehicle. A motorist’s daily travel distance variation is ignored. This paper employs the GPS-based longitudinal travel data (covering 3–18 months) collected from 403 vehicles in the Seattle metropolitan area to investigate how such travel and charging behavior affects UFs. To do this, for each vehicle, we organized trips to a series of home and work related tours. The UFs based on the DVMT are found close to those based on home-to-home tours. On the other hand, it is seen that the workplace charge opportunities significantly increase UFs if the CD range is no more than 40 miles.     

Fuel price elasticities for single-unit truck operations in the United States

This paper provides fuel price elasticity estimates for single-unit truck activity, where single-unit trucks are defined as vehicles on a single frame with either (1) at least two axles and six tires; or (2) a gross vehicle weight greater than 10,000 lb. Using data from 1980 to 2012, this paper applies first-difference and error correction models and finds that single-unit truck activity is sensitive to certain macroeconomic and infrastructure factors (gross domestic product, lane miles expansion, and housing construction), but is not sensitive to diesel fuel prices. These results suggest that fuel price elasticities of single unit truck activity are inelastic. These results may be used by policymakers in considering policies that have a direct impact on fuel prices, or policies whose effects may be equivalent to fuel price adjustments.     

Hierarchical travel demand estimation using multiple data sources: A forward and backward propagation algorithmic framework on a layered computational graph

Aiming to develop a theoretically consistent framework to estimate travel demand using multiple data sources, this paper first proposes a multi-layered Hierarchical Flow Network (HFN) representation to structurally model different levels of travel demand variables including trip generation, origin/destination matrices, path/link flows, and individual behavior parameters. Different data channels from household travel surveys, smartphone type devices, global position systems, and sensors can be mapped to different layers of the proposed network structure. We introduce Big data-driven Transportation Computational Graph (BTCG), alternatively Beijing Transportation Computational Graph, as the underlying mathematical modeling tool to perform automatic differentiation on layers of composition functions. A feedforward passing on the HFN sequentially implements 3 steps of the traditional 4-step process: trip generation, spatial distribution estimation, and path flow-based traffic assignment, respectively. BTCG can aggregate different layers of partial first-order gradients and use the back-propagation of “loss errors” to update estimated demand variables. A comparative analysis indicates that the proposed methods can effectively integrate different data sources and offer a consistent representation of demand. The proposed methodology is also evaluated under a demonstration network in a Beijing subnetwork.     

Quantifying the transport-related impacts of parental school choice in England

School travel is becoming increasingly car-based and this is leading to many environmental and health implications for children all over the world. One of several reasons for this is that journey to school distances have increased over time. This is a trend that has been reinforced in some countries by the adoption of so-called ‘school choice’ policies, whereby parents can apply on behalf of their child(ren) to attend any school, and not only the school they live closest to. This paper examines the traffic and environmental impacts of the school choice policy in England. It achieves this by analysing School Census data from 2009 from the Department for Education. Multinomial logit modelling and mixed multinomial logit modelling are used to illustrate the current travel behaviour of English children in their journey to school and examine how there can be a significant reduction in vehicle miles travelled, CO₂ emissions and fuel consumption if the ‘school choice’ policy is removed. The model shows that when school choice was replaced by a policy where each child only travelled to their ‘nearest school’ several changes occurred in English school travel. Vehicle Miles Travelled (VMT) by motorised transport fell by 1 % for car travel and 10 % for bus travel per day. The reduction in vehicle miles travelled could lead to less congestion on the roads during the morning rush hour and less cars driving near school gates. Mode choice changed in the modelled scenario. Car use fell from 32 to 22 %. Bus use fell from 12 to 7 %, whilst NMT saw a rise of 17 %. With more children travelling to school by walking or cycling the current epidemic of childhood obesity could also be reduced through active travel.     

A copula-based joint multinomial discrete–continuous model of vehicle type choice and miles of travel

In this paper, a joint model of vehicle type choice and utilization is formulated and estimated on a data set of vehicles drawn from the 2000 San Francisco Bay Area Travel Survey. The joint discrete–continuous model system formulated in this study explicitly accounts for common unobserved factors that may affect the choice and utilization of a certain vehicle type (i.e., self-selection effects). A new copula-based methodology is adopted to facilitate model estimation without imposing restrictive distribution assumptions on the dependency structures between the errors in the discrete and continuous choice components. The copula-based methodology is found to provide statistically superior goodness-of-fit when compared with previous estimation approaches for joint discrete–continuous model systems. The model system, when applied to simulate the impacts of a doubling in fuel price, shows that individuals are more likely to shift vehicle type choices than vehicle usage patterns.