High speed rail market projection: Survey design and analysis

This paper summarises work done to assess the market potential and likely financial performance of a planned high-speed rail link connecting Sydney, Canberra and Melbourne, under a variety of scenarios concerning the services offered and the possible market responses of the competing transport modes in the corridor. In the Australian context, such a link has the characteristics of an essentially new transport mode since existing rail services are extremely poorly developed. The expectation was that generated demand could be a substantial part of the overall ridership. A programme of market research was commissioned by the private consortium considering the project, designed to support forecasting models capable of predicting both diverted and generated travel on the new service. A major survey of current travellers was conducted in 1988, followed by an extensive collection of stated preference evidence about the factors affecting the travel decisions of both existing travellers and those who had not recently made any journeys in the corridor. The paper focuses mainly on the design and organisation of the surveys, on the analysis approach, and on the methods used to generate forecasts for simulated populations and scenarios.     

Intercity rail services: A nested logit stated choice analysis of pricing options

There is a renewed interest in intercity and long-distance rail services in many countries, with both new high-speed rail services and improvements to conventional rail under review. The current study reports on an investigation using a stated choice experiment, of the demand for sleeper services between Sydney, Northern New South Wales (NSW) and Brisbane in Australia, a 12 to 14 hour trip, just after a decision by the NSW government to temporarily suspend sleeper services and introduce seating service only, pending an inquiry into the demand for such loss-making services under alternative price and service levels. A matrix of direct fare elasticities within the rail mode and between rail and competing modes are obtained for concession and non-concession travellers from a nested logit model. The empirical evidence extends our knowledge of the sensitivity of the long distance passenger market to a range of rails fares, distinguishing between classes of fares and levels of service.     

Role of the Railways in the Future of Air Transport

Abstract

The role of the railways in the air transport industry is usually limited to provision of access to airports. However, the development of high-speed rail networks and the congestion and environmental problems faced by the air transport industry suggest the railways could have a greater role in working with the airlines to provide an integrated transport service for medium-distance journeys (up to 800 km). Many air journeys involve two flights and a transfer at a hub airport. The alternative being investigated here would replace air journeys by a rail journey and a flight, and a transfer between them at the hub airport. Such integration could offer a positive alternative to aircraft on some routes and lead to railway journeys to airports becoming part of air transport services, and not only to provide access to them. Integration could therefore provide a better use of available air capacity rather than duplicating some high-speed rail routes and services.     

Modelling passenger demand for parkway rail stations

Interest in Parkway stations emerged in the 1980s. These act as convenient out-of-town stations for inter-urban rail journeys. There were 13 so-called Parkway stations in Great Britain in 1999 and two have subsequently been opened. This paper reports the development and application of a new Parkway forecasting model which was conducted for the Association of Train Operating Companies (ATOC), undertaken as part of an extensive update to the Passenger Demand Forecasting Handbook, which recommends demand forecasting frameworks and associated parameters that are widely used in the railway industry in Great Britain. The objective was to develop a model that had more desirable properties and was more straightforward to apply than the previously recommended procedure. The focus is entirely upon inter-urban journeys of over 80 km.The model forecasts the demand for Parkway stations based solely on rail ticket sales data and its properties are illustrated with two case study applications. The nature of Parkway stations forces consideration of competition, and it is demonstrated that the inclusion of a station choice component leads to a somewhat improved explanatory power and a more plausible generalised cost elasticity.In addition to the methodological developments, the model has provided generally reasonable elasticities and forecasts and shown that Parkway users have different preferences to rail travellers in general. In a test based around a newly opened Parkway station, its forecasts are more accurate than the procedure it replaces.     

Cost and time damping: evidence from aggregate rail direct demand models

There is a significant body of evidence from both disaggregate choice modelling literature and practical travel demand forecasting that the responsiveness to cost and possibly to time diminishes with journey length. This has, in Britain at least, been termed ‘Cost Damping’, and is recognised in guidance issued by the UK Department for Transport. However, the consistency of the effect across modes and data types has not been established. Cost damping, if it exists, affects both the forecasting of demand and our understanding of behaviour. This paper aims to investigate the evidence for cost and time damping in rail demand using aggregate rail ticket sales data. The rail ticket sales data in Britain has, for many years, formed the basis of analysis of a wide range of impacts of rail demand. It records the number of tickets sold between station pairs, and it is generally felt to provide a reasonably accurate reflection of travel demand. However, the consistency of these direct demand models with choice modelling and highway demand model structures has not been investigated. Rail direct demand models estimated by ticket sales data indicate only slight variation in the fare elasticity with distance, as is evidenced in the largest meta-analysis of price elasticities conducted to date (Wardman in J Transp Econ Policy 48(3):367–384, 2014). This study of UK elasticities shows strong variation between urban and inter-urban trips, presumably a segmentation at least in part by purpose, but less remaining variation by trip length. A lack of variation by length supports the hypothesis of cost damping, because constant cost sensitivity would imply that fare elasticity would increase strongly with distance, because of the increasing impact of higher fares at longer distances. In this paper we indicate that rail direct demand models have some consistency of behavioural paradigm with utility based choice models used in highway planning. We go on to use rail demand data to estimate time and fare elasticities in the context of various cost damping functions. Our empirical contribution is to estimate time elasticities on a basis directly comparable with cost elasticities and to show that the phenomenon of cost damping is strongly present in ticket sales data. This finding implies that cost damping should be included in models intended for multimodal analysis, which may otherwise give incorrect predictions.     

New routes on old railways: increasing rail’s mode share within the constraints of the existing railway network

This paper describes an integrated methodology for identifying potential ‘quick wins’ for mode shift from road to passenger rail transport. Firstly, a procedure for analysing rail’s relative competitiveness in the market for passenger transport between large urban areas is developed and then applied to a UK case study. The purpose of such analysis is to allow the identification of flows where rail is currently relatively uncompetitive (in terms of journey time in particular) and to assess the reasons for this poor performance, so that the issues which suppress rail use may be addressed. In parallel, a framework, methodology and tool for the assessment of existing and potential capacity (trains, seats, TEUs, etc.) is developed for both passenger and freight traffic, to identify and address network constraints. An illustrative example of the use of these demand and capacity assessment tools is then presented, with the tools used to identify and evaluate flows where rail demand is suppressed by poor service quality and where spare capacity exists which would allow the passenger rail service to be improved without requiring significant investments in infrastructure. The effects of such improvements on demand are predicted, and the cost implications of operating such additional services are discussed. The analysis suggests that there may be significant potential for increasing rail’s mode share by providing additional inter-urban services where rail currently offers an inferior service.     

Long-term impact of the Shinkansen on rail and air demand: analysis with data from Northeast Japan

This paper analyses how the high-speed rail construction in Northeast Japan (Tohoku) has affected total demand and interregional travel patterns. We use annual interregional passenger data from 1989 to 2012 and apply regression analysis with the demand between Tokyo and the Tohoku prefectures as the dependent variable. We distinguish particularly between the ‘Full-’ and the ‘Mini-’ Shinkansen, where the latter are branch services running with reduced speed. We find that the ‘Full-Shinkansen’ quickly increases rail and total public transport trips and generates additional rail demand year on year. The ‘Mini-Shinkansen’ impacts are less pronounced. Furthermore, our analysis shows that the Shinkansen has shifted some demand from air to rail once it started operation and increased rail share gradually. We therefore suggest that predictions of demand impacts should carefully distinguish immediate from gradual impacts. We also discuss differences in regional demand in that not all prefectures have gained equally from Shinkansen construction.     

Investigating the market for inter-modal freight technologies

Freight carried by rail has traditionally been mainly low value bulk commodities. The market for transport of such commodities appears at best static and is forming a smaller proportion of the total demand for freight transport. There is thus an urgent need for rail operators to develop practical and cost effective inter-modal systems, which offer high quality services to consignors of consumer goods whose premises are not usually connected to the rail network. Much long-haul traffic of this type is international. In continental Europe, a number of inter-modal technologies—including swapbodies and piggyback—have long been in use. Development of similar technologies for use within the more constrained loading gauge of Great Britain, has received a great boost from the impending opening of the Channel Tunnel. The alternative technologies are discussed, before turning to ways of stimating the market for them. A large part of the paper is devoted to reporting on a computerised survey using our LASP (Leeds Adaptive Stated Preference) technique. The reason for using hypothetical Stated Preference data is the inadequate nature and extent of data on actual choice decisions, particularly in circumstances in which confidential freight rates are individually negotiated and little general merchandise goes by rail. By bringing together the results of this survey with information on costs and quality of service, the likely future market for inter-modal freight technologies is assessed. It is seen that the potential for inter-modal services within Britain is very limited, although there should be a good opportunity on the major corridor from London to Scotland through the West Midlands and the North West. When the Channel Tunnel is opened, however, the potential for services between Britain and continental Europe will be enormous, provided that an adequate quality of service can be offered.     

The integration of Taiwanese and Chinese air networks for direct air cargo services

The two sides of the Taiwan Strait perform mutually dependent but complementary activities in the global manufacturing supply-chain. As a result, trade between Taiwan and China grew in double digits annually in the 1990s. With growing economic ties, direct air links are inevitable. In this research, we analyzed government documents and interviewed the air cargo carriers and airlines that currently serve the Taiwan–China air cargo market. This information enabled us to tabulate the trade, estimate the airport-to-airport air cargo demand and calibrate the international and domestic freight tariffs. We used a connectivity measurement and classified Chinese airports into national, regional and local classes in a hub-and-spoke air cargo network. We developed a mathematical model and a branch-and-bound algorithm. The results showed that at least two transit airports are economically necessary for a Taiwan–China air link. Shanghai and Xiamen were always the top two transit airports. The third airport would be Changsha if the decision becomes three air-links. These links are different from the top three passenger transit airports, Fuzhou, Xiamen and Shanghai, even though the cost saving is moderate.     

Inter-temporal variation in the travel time and travel cost parameters of transport models

The parameters for travel time and travel cost are central in travel demand forecasting models. Since valuation of infrastructure investments requires prediction of travel demand for future evaluation years, inter-temporal variation of the travel time and travel cost parameters is a key issue in forecasting. Using two identical stated choice experiments conducted among Swedish drivers with an interval of 13 years, 1994 and 2007, this paper estimates the inter-temporal variation in travel time and cost parameters (under the assumption that the variance of the error components of the indirect utility function is equal across the two datasets). It is found that the travel time parameter has remained constant over time but that the travel cost parameter has declined in real terms. The trend decline in the cost parameter can be entirely explained by higher average income level in the 2007 sample compared to the 1994 sample. The results support the recommendation to keep the travel time parameter constant over time in forecast models, but to deflate the travel cost parameter with the forecasted income increase among travellers and the relevant income elasticity of the cost parameter. Evidence from this study further suggests that the inter-temporal and the cross-sectional income elasticities of the cost parameter are equal. The average elasticity is found to be ?0.8 to ?0.9 in the present sample of drivers, and the elasticity is found to increase with the real income level, both in the cross-section and over time.     

Structural equation modeling for national travel demand: an examination of the relationships between communication modes

This paper examines the relationships among different transportation modes, and between transportation and telecommunications, by applying the structural equation modeling (SEM) technique. For this purpose, we collected and compiled time series data on national travel demand, and socioeconomic and telecommunications conditions in Taiwan, and built national travel demand models using SEM. The estimation results show that the relationship between telecommunications and transportation demand (either car ownership or public transportation) is more complementary than substitutional. Moreover, car ownership is a type of inelastic necessity good, and its relationship with public transportation is more substitutional than complementary. Finally, among the three public transportation modes – rail, bus and domestic air – it is found that air is weakest in terms of competitive power. From the viewpoint of long-term forecasting trends, the bus holds its competitive power in comparison with other public transportation modes and would not be replaced in the future.     

An investigation into the feasibility of increasing rail use as an alternative to the car

With rail travel largely seen to be a more sustainable method than road-based transport, this paper examines the market segments amongst existing motorists that would be most likely to travel by train in the UK. The analysis is based on a large survey in London and the south-east of England, the area surrounding the routes operated by the train company First Capital Connect. Findings show that train travellers tend to be middle-aged and of a higher social grade, typically taking commuting or business trips. Individuals living within four miles of a station are considerably more likely to travel by rail than those further away. Given the competition from road-based transport, it is of particular interest that the measure highlighted to increase rail use for those living further away from the rail network is to enhance car parking at train stations.     

On the relationship between airport pricing models

Airport pricing papers can be divided into two approaches. In the traditional approach the demand for airport services depends on airport charges and on congestion costs of both passengers and airlines; the airline market is not formally modeled. In the vertical-structure approach instead, airports provide an input for an airline oligopoly and it is the equilibrium of this downstream market which determines the airports’ demand. We prove, analytically, that the traditional approach to airport pricing is valid if air carriers have no market power, i.e. airlines are atomistic or they behave as price takers (perfect competition) and have constant marginal operational costs. When carriers have market power, this approach may result in a surplus measure that falls short of giving a true measure of social surplus. Furthermore, its use prescribes a traffic level that is, for given capacity, smaller than the socially optimal level. When carriers have market power and consequently both airports and airlines behave strategically, a vertical-structure approach appears a more reasonable approach to airport pricing issues.     

Investigation and analysis of evidence of asymmetric churn in travel demand models

There is a large amount of research work that has been devoted to the understanding of travel behaviour and for the prediction of travel demand and its management. Different types of data including stated preference and revealed preference, as well as different modelling approaches have been used to predict this. Essential to most travel demand forecasting models are the concepts of utility maximisation and equilibrium, although there have been alternative approaches for modelling travel behaviour. In this paper, the concept of asymmetric churn is discussed. That is travel behaviour should be considered as a two way process which changes over time. For example over time some travellers change their mode of travel from car to bus, but more travellers change their mode from bus to car. These changes are not equal and result in a net change in aggregate travel behaviour. Transport planners often aim at producing this effect in the opposite direction. It is important therefore to recognise the existence of churns in travel behaviour and to attempt to develop appropriate policies to target different groups of travellers with the relevant transport policies in order to improve the transport system. A data set collected from a recent large survey, which was carried out in Edinburgh is investigated to analyse the variations in departure time choice behaviour. The paper reports on the results of the investigation.     

Living with aircraft noise: Airport proximity,aviation noise and subjective wellbeing in England

Airport expansion is an issue of intense public debate due to the potential impacts on climate change and the quality of life of affected local communities. This paper is the first study to analyse the relationships between airports and multiple subjective wellbeing measures, by merging national-level population statistics with noise measurement maps for seventeen English airports. The presence of daytime aviation noise was found to consistently negatively impact on five subjective wellbeing measures. We found a marginal negative association with every additional decibel of aircraft noise. We found no significant association between wellbeing and living within night-time noise contours or living in close airport proximity. We conclude that living under air traffic flight paths has a negative effect on peoples’ overall and momentary wellbeing, equivalent to around half the effect of being a smoker for some wellbeing measures. The subjective wellbeing method findings support wider revealed preference literature showing lower market demand in areas affected by aviation noise.     

Optimization of airport bus timetable in cultivation period considering passenger dynamic airport choice under conditions of uncertainty

An airport bus service, which is newly introduced in a multi-airport region, commonly leads to a gradually increasing market share of airports until a new state of equilibrium is reached. With the goal of speeding up and enlarging the increase in market share, this paper proposes a timetable optimization model by incorporating reactions of airport-loyal passengers to bus service quality. The simulation part of the model, which uses cumulative prospect theory to formulate discrete airport choices, results in predicted passenger demand needed in the optimization part. Then a genetic algorithm for multi-objective optimization problems called NSGA-II is applied to solve the model. To illustrate the model, the “Lukou airport-Wuxi” airport bus in China is taken as an example. The results show that the optimized timetables shorten the cultivation period and impel the market share to grow rapidly.     

Novel approaches to forecasting the demand for new local rail services

Revealed Preference(RP) studies based on actual behaviour suffer from a number of statistical problems. Furthermore, RP methods are of little use when the effects of a new or radically altered service need to be considered. As a result, for a case study of demand forecasting for new passenger rail services, a new approach has been developed. Our starting point is to seek what we call Stated Intentions (SI) responses as to the likely usage of a new rail service. However, due to a combination of systematic biases, these responses may be taken to be gross overestimates. A check on the biases of this SI data may be supplied by a Stated Preference (SP) survey. Respondents are asked to make hypothetical choices which are sufficiently complex for there to be little chance of policy bias. It is ensured that choices presented contain useful ‘boundary values,’ being the relative valuation for which respondents would be indifferent between two offered alternatives. It is, however, crucial to ensure that the SP survey is simple enough for respondents to manage, since excessive error variability in the responses will cause the calibrated coefficients to be rescaled, presenting problems for forecasting. From the SP surveys, it is estimated that SI data overstates usage of new rail services by around 50%, even if it is assumed that nonrespondents to the SI survey are nonusers. It is concluded that an SI/SP approach can potentially provide accurate forecasts, but there are a number of practical constraints that may prevent this.     

Access to railway stations and its potential in increasing rail use

The propensity to travel by rail, and not, for example by car, can be considered to be a factor of the rail service offered, the access to it and the characteristics of the population served. Efforts to increase rail use usually focus on the rail service itself while the accessibility of the rail network receives less attention. In this context, the paper has two broad aims. First, to evaluate how important the ‘access-to-the-station’ part of a rail journey is to passengers in their overall satisfaction with the rail journey and second, to investigate the balance between characteristics of the service, the access to it and the population served in determining rail use in different parts of the rail network. The analysis is carried out for the Netherlands. To achieve the first aim, we use the Dutch Railways customer satisfaction survey and apply principal component analysis and derived importance techniques to assess the relative importance of accessibility in determining the overall satisfaction with the rail journey. For the second aim, we use regression analysis to explain, at the Dutch postcode level, the propensity to use rail. We find that satisfaction with the level and quality of the access to the station is an important dimension of the rail journey which influences the overall satisfaction from that journey and that the quality and level of accessibility is an important element in explaining rail use. The conclusion reached is that in many parts of the rail network improving and expanding access services to the railway station can substitute for improving and expanding the services provided on the rail network and that it is probably more cost efficient when the aim is to increase rail use. These parts of the network are mainly in the periphery where the current level of rail service is relatively low.     

Travel time reliability: a review of late time valuations,elasticities and demand impacts in the passenger rail market in Great Britain

This paper provides an extensive review and reconciliation of British and European evidence relating to the value of, and demand responses to, rail reliability. In particular, we compare the elasticities implied by stated preference valuations of late time with directly estimated lateness elasticities. We find that the implied lateness elasticities are substantially greater than those directly estimated. A possible explanation for this is that lateness has been over-valued, but more sobering explanations would be to suggest that, whilst rail travellers dislike unreliability, they may be unwilling or unable to reduce their rail travel in response to experiences of poor performance, or else conventional economic approaches to deducing elasticities are not appropriate. The findings have been used to update the recommendations of the UK rail industry’s Passenger Demand Forecasting Handbook.     

Airline’s choice of aircraft size – Explanations and implications

When facing a growth in demand, airlines tend to respond more by means of increasing frequencies than by increasing aircraft size. At many of the world’s largest airports there are fewer than 100 passengers per air transport movement, although congestion and delays are growing. Furthermore, demand for air transport is predicted to continue growing but aircraft size is not. This paper aims to investigate and explain this phenomenon, the choice of relatively small aircraft. It seems that this choice is associated mainly with the benefits of high frequency service, the competitive environment in which airlines operate and the way airport capacity is allocated and priced. Regression analysis of over 500 routes in the US, Europe and Asia provides empirical evidence that the choice of aircraft size is mainly influenced by route characteristics (e.g. distance, level of demand and level of competition) and almost not at all by airport characteristics (e.g. number of runways and whether the airport is a hub or slot coordinated). We discuss the implications of this choice of aircraft size and suggest that some market imperfections exist in the airline industry leading airlines to offer excessive frequency on some routes and too low frequency on others.