Individual trip rate transferability analysis based on a decision tree approach

Transferring trip rates to areas without local survey data is a common practice which is typically performed in an ad hoc fashion using household-based cross-classification tables. This paper applies a rule-based decision tree method to develop individual-level trip generation models for eight different trip purposes as defined in the US National Household Travel Survey in addition to daily vehicle miles traveled. For each trip purpose, the models are obtained by finding the best fitted statistical distribution to each of the final decision tree clusters while considering the correlation between the trip rates for other trip purposes. The rule-based models are sensitive to changes in demographics. The performance of the models is then tested and validated in a transferability application to the Phoenix Metropolitan Region. These models can be employed in a disaggregate microsimulation framework to generate trips with different purposes at the individual or household level.     

Incorporating spatial interactions in zero-inflated negative binomial models for freight trip generation

This paper formulates a spatial autoregressive zero-inflated negative binomial model for freight trip productions and attractions. The model captures the following freight trip characteristics: count data type, positive trip rates, overdispersion, zero-inflation, and spatial autocorrelation. The spatial autoregressive structure is applied in the negative binomial part of the models to obtain unbiased estimates of the effects of different regressors. Further, we estimate parameters using the full information maximum likelihood estimator. We perform empirical analysis with an establishment based freight survey conducted in Chennai. Separate models are estimated for trips generated by motorised two-wheelers and three-wheelers, and pickups besides an aggregate model. Spatial variables such as road density and indicator of geolocation are insignificant in all the models. In contrast, the spatial autocorrelation is significant in all of the models except for the freight trips attracted and produced by pickups. From a policy standpoint, the elasticity results show the importance of considering spatial autocorrelation. We also highlight the bias due to aggregation of vehicle classes, based on the elasticities.

     

Spatial transferability assessment of a composite walkability index: The Pedestrian Index of the Environment (PIE)

This paper analyzes the transferability of a composite walkability index, the Pedestrian Index of the Environment (PIE), to the Greater Montréal Area (GMA). The PIE was developed in Portland, Oregon, and is based on proprietary data. It combines six urban form variables into a score ranging from 20 to 100. The measure introduces several methodological refinements which have not been applied concurrently in previous efforts: a wide coverage of the different dimensions of the urban form, together with the use of a distance-based decay function and modelling-based weighing of the variables.This measure is applied to the GMA using local data in order to evaluate the feasibility of its transfer (the possibility of locally replicating the measure). It is then included in a series of mode choice models to assess its transferability (the capacity of the measure to describe walkability and predict mode choice in another urban area). The models, segmented by trip distance or trip purpose, are estimated and validated against observed trip data from the 2013 Origin-Destination survey.Significant positive correlation is found between the PIE and the choice of walking for short trips, for all purposes as well as for four specific trip purposes. The inclusion of the PIE also improves the accuracy of the modelling process as well as the prediction of the choice of walking for short trips. The PIE can therefore be used in the GMA, and potentially in other metropolitan areas, to improve the modelling of travel behavior for short trips.     

Estimating time dependent O‐D trip tables during peak periods

Intelligent transportation systems (ITS) have been used to alleviate congestion problems arising due to demand during peak periods. The success of ITS strategies relies heavily on two factors: 1) the ability to accurately estimate the temporal and spatial distribution of travel demand on the transportation network during peak periods, and, 2) providing real‐time route guidance to users. This paper addresses the first factor. A model to estimate time dependent origin‐destination (O‐D) trip tables in urban areas during peak periods is proposed. The daily peak travel period is divided into several time slices to facilitate simulation and modeling. In urban areas, a majority of the trips during peak periods are work trips. For illustration purposes, only peak period work trips are considered in this paper. The proposed methodology is based on the arrival pattern of trips at a traffic analysis zone (TAZ) and the distribution of their travel times. The travel time matrix for the peak period, the O‐D trip table for the peak period, and the number of trips expected to arrive at each TAZ at different work start times are inputs to the model. The model outputs are O‐D trip tables for each time slice in the peak period. 1995 data for the Las Vegas metropolitan area are considered for testing and validating the model, and its application. The model is reasonably robust, but some lack of precision was observed. This is due to two possible reasons: 1) rounding‐off, and, 2) low ratio of total number of trips to total number of O‐D pair combinations. Hence, an attempt is made to study the effect of increasing this ratio on error estimates. The ratio is increased by multiplying each O‐D pair trip element with a scaling factor. Better estimates were obtained. Computational issues involved with the simulation and modeling process are discussed.     

Traffic assignment by trip type using volume restraint and link restraint for application in small urban areas

This research involved the development of a new traffic assignment model consisting of a set of procedures for an urbanized area with a population of 172,000. Historical, social, and economic data were used as input to conventional trip generation and trip distribution models to produce a trip table for network assignment. This fixed table was divided into three trip types: external-external trips, external-internal trips, and internal-internal trips. The methodology used to develop the new traffic assignment model assigned each of the trip types by varying the diversion of trips from the minimum path. External-external trips were assigned on a minimum path routing and external-internal trips were assigned with a slight diversion from the minimum path. Internal-internal trips were assigned with more diversion than external-internal trips and adjusted by utilizing iterative volume restraint and incremental link restraint. A statistical analysis indicated that assigning trips by trip types using trip diversion and volume and link restraint produces a significant improvement in the accuracy of the assigned traffic volumes.     

Traveler delay costs and value of time with trip chains, flexible activity scheduling and information

The delay costs of traffic disruptions and congestion and the value of travel time reliability are typically evaluated using single trip scheduling models, which treat the trip in isolation of previous and subsequent trips and activities. In practice, however, when activity scheduling to some extent is flexible, the impact of delay on one trip will depend on the actual and predicted travel time on itself as well as other trips, which is important to consider for long-lasting disturbances and when assessing the value of travel information. In this paper we extend the single trip approach into a two trips chain and activity scheduling model. Preferences are represented as marginal activity utility functions that take scheduling flexibility into account. We analytically derive trip timing optimality conditions, the value of travel time and schedule adjustments in response to travel time increases. We show how the single trip models are special cases of the present model and can be generalized to a setting with trip chains and flexible scheduling. We investigate numerically how the delay cost depends on the delay duration and its distribution on different trips during the day, the accuracy of delay prediction and travel information, and the scheduling flexibility of work hours. The extension of the model framework to more complex schedules is discussed.     

A comparative analysis of traditional four-step and activity-based travel demand modeling: a case study of Tampa,Florida

Activity-based travel demand modeling (ABTDM) has often been viewed as an advanced approach, due to its higher fidelity and better policy sensitivity. However, a review of the literature indicates that no study has been undertaken to investigate quantitatively the differences and accuracy between an ABTDM approach and a traditional four-step travel demand model. In this paper we provide a comparative analysis against each step – trip generation, trip distribution, mode split, and network assignment – between an ABTDM developed using travel diary data from the Tampa Bay Region in Florida and the Tampa Bay Regional Planning Model (TBRPM), an existing traditional four-step model for the same area. Results show salient differences between the TBRPM and the ABTDM, in terms of modeling performance and accuracy, in each of the four steps. For example, trip production rates calculated from the travel diary data are found to be either double or a quarter less than those used in the TBRPM. On the other hand, trip attraction rates computed from activity-based travel simulations are found to be either more than double or one tenth less than those used in the TBRPM. The trip distribution curves from the two models are similar, but both average and peak trip lengths of the two are significantly different. Mode split analyses show that the TBRPM may underestimate driving trips and fail to capture any usage of alternative modes, such as taxi and nonmotorized (e.g., walking and bicycling) modes. In addition, the ABTDMs are found to be less capable of reproducing observed traffic counts when compared to the TBRPM, most likely due to not considering external and through trips. The comparative results presented can help transportation engineers and planners better understand the strengths and weaknesses of the two types of model and this should assist decision-makers in choosing a better modeling tool for their planning initiatives.     

Design charts for estimating transportation planning statistics from area population

Utilizing data collected for urban transportation studies in Ontario, regression analysis has been used to establish relationships between the daily number of person trips in an urban area and the area population. In particular the number of trips by auto drivers, auto passengers and mass transit riders have been investigated. Further, auto driver trips have been stratified into the following destination trip purposes: return home, work and related business, shopping, social-recreational and miscellaneous. The results of this analysis have been used to prepare a set of design charts. These charts are presented graphically and in the form of a nomogram. The accuracy of these charts has been investigated and found satisfactory for most planning purposes.     

Energy consumption,pollutant production,and dollar costs of diesel suburban commuter trains

The results presented in this report are based on data obtained from Chicago's three largest diesel commuter railroads. Those aspects of their operations that relate to energy and pollution are described. Service characteristics, such as average occupancy and average trip distance, are presented. Energy consumption results are presented and discussed. With energy efficiency measured in passenger-miles per Btu, it is found that trips by diesel commuter train are 3.5 times more energy efficient than Chicago Central Area auto trips. The total trip from home to suburban station, then by train to a downtown terminal, is found to be 2.2 times more energy efficient than Chicago Central Area auto trips. Pollutant production rates are presented for five pollutants. For every pollutant except sulfur oxides, trains are found to be less polluting per passenger-mile than autos. Per passenger-mile pollutant emissions from trains are, overall, less damaging by a factor of 5.5 than the per passenger-mile emissions from autos. Travel on these diesel commuter trains is less costly to society than auto travel (1972 suburban-based autos). This is the case whether one compares the train trip alone with an auto trip or the home-to-suburb an-station-tlien-to-a-downtown-terminal trip with a home-to-downtown auto trip.     

Effects of household structure and selected travel characteristics on trip chaining

This paper analyzes trip chaining, focusing on how households organize non-work travel. A trip chaining typology is developed using household survey data from Portland, Oregon. Households are organized according to demographic structure, allowing analysis of trip chaining differences among household types. A logit model of the propensity to link non-work trips to the work commute is estimated. A more general model of household allocation of non-work travel among three alternative chain types — work commutes, multi-stop non-work journeys, and unlinked trips — is also developed and estimated. Empirical results indicate that the likelihood of linking work and non-work travel, and the more general organization of non-work travel, varies with respect to household structure and other factors which previous studies have found to be important. The effects of two congestion indicators on trip chaining were mixed: workers who commuted in peak periods were found to have lower propensity to form work/non-work chains, while a more general congestion indicator had no effect on the allocation of non-work trips among alternative chains.     

Is accessibility relevant in trip generation? Modelling the interaction between trip generation and accessibility taking into account spatial effects

The influence of accessibility to opportunities in trip generation continues to be debated in the specialised literature given its relevance to simulate phenomena such as induced demand. This article estimates multiple linear regression models (MLR), spatial autoregressive models (SAR), spatial autoregressive models in the error term (SEM) and spatially filtered Poisson regression models (SPO) to discover whether or not accessibility is a significant factor in trip generation using data from the urban area of Santander (Spain). The results obtained provide evidence which shows that, on an intraurban scale, more accessibility to opportunities decreases trip production in private vehicle for work purpose, whereas it increases trip production in other transport modes for non—mandatory purposes. For the correct interpretation of the estimated parameters it was important to consider the direct and indirect effects of the independent variables in the SAR production models. Finally, the validation of the models showed that the SAR and SEM models had a mean squared error slightly lower than the MLR models in predicting overall trip production. This was because the spatial models reduced the correlation of the residuals present in the MLR models. Furthermore, the SPO models performed better in validation mode than all the continuous models.     

Intrapersonal variability in daily urban travel behavior: Some additional evidence

Researchers have used multiday travel data sets recently to examine day-to-day variability in travel behavior. This work has shown that there is considerable day-to-day variation in individuals' urban travel behavior in terms of such indicators of behavior as trip frequency, trip chaining, departure time from home, and route choice. These previous studies have also shown that there are a number of important implications of the observed day-to-day variability in travel behavior. For example, it has been shown that it may be possible to improve model parameter estimation precision, without increasing the cost of data collection, by drawing a multiday sample (rather than a single day sample) of traveler behavior, if there is considerable day-to-day variability in the phenomenon being modeled. This paper examines day-to-day variability in urban travel using a three-day travel data set collected recently in Seattle, WA. This research replicates and extends previous work dealing with day-to-day variability in trip-making behavior that was conducted with data collected in Reading, England, in the early 1970s. The present research extends the earlier work by examining day-to-day variations in trip chaining and daily travel time in addition to the variation in trip generation rates. Further, the present paper examines day-to-day variations in travel across the members of two-person households. This paper finds considerable day-to-day variability in the trip frequency, trip chaining and daily travel time of the sample persons and concludes that, in terms of trip frequency, the level of day-to-day variability is very comparable to that observed previously with a data set collected almost 20 years earlier in Reading, England. The paper also finds that day-to-day variability in daily travel time is similar in magnitude to that in daily trip rates. The analysis shows that the level of day-to-day variability is about the same for home-based and non-homebased trips, thus indicating that day-to-day variability in total trip-making is attributable to variation in both home-based and non-home-based trips. Day-to-day variability in the travel behaviors of members of two-person households was also found to be substantial.     

Fuel consumption and emission modelling by power demand and a comparison with other models

Part 1 describes a fuel consumption model based upon the instantaneous power demand experienced by a vehicle, which has been developed from chassis dynamometer experiments on 177 in-use Australian vehicles. When applied to an individual vehicle, the model provides aggregate fuel consumption estimates for on-road driving which are within 2% of the actual measured fuel usage. Emission rate models for hydrocarbons and nitrogen oxides which are of the same form as the fuel consumption model are also presented. The vehicle model can be applied in any traffic situation provided on-road power demand is known. On-road instantaneous power demand is derived from the vehicle's mass, drag, velocity acceleration and road gradient. In the first part 1929 km and 2778 links of traffic driving pattern data for both urban and non-urban trips are presented. Correlations between the link power and traffic parameters are presented and it is shown that vehicle link fuel consumption and emissions can be accurately calculated from vehicle mass, engine capacity, link average velocity, link average positive inertial power, link altitude change and link trip time. In the non-urban case, link power, and hence fuel consumption and emissions, are not dependent upon positive inertial power. In Part 2 the instantaneous vehicle power demand model is used to develop fuel usage input information to evaluate a simple average velocity model and an elemental model. The performance of these two models is compared with that of the on-road power method by “driving” all three models over 2281 links and 956 km of recorded on-road velocity, acceleration and gradient data. It is shown that all three models can be made to perform well for long trips. The elemental model, however, suffers from an inability to adequately describe the fuel usage of different stop-start manoeuvres and requires some calibration in order to account for cruise speed fluctuations. For short trips, 3.5 km in length or less, the on-road power demand method is superior. Under these conditions, both the simple V̄ and elemental models are unable to adequately describe the fuel usage relating to inertial power demands. It is shown that for short trips, inertial power demand does not correlate with average velocity and may range from near zero to up to twice the total trip averaged power.     

Modelling the impact of weather conditions on active transportation travel behaviour

Three weather sensitive models are used to explore the relationship between weather and home-based work trips within the City of Toronto, focusing on active modes of transportation. The data are restricted to non-captive commuters who have the option of selecting among five basic modes of auto driver, auto passenger, transit, bike and walk. Daily trip rates in various weather conditions are assessed. Overall, the results confirm that impact of weather on active modes of transportation is significant enough to deserve attention at the research, data collection and planning levels.     

An analysis of the factors influencing differences in survey-reported and GPS-recorded trips

Recent advances in global positioning systems (GPS) technology have resulted in a transition in household travel survey methods to test the use of GPS units to record travel details, followed by the application of an algorithm to both identify trips and impute trip purpose, typically supplemented with some level of respondent confirmation via prompted-recall surveys. As the research community evaluates this new approach to potentially replace the traditional survey-reported collection method, it is important to consider how well the GPS-recorded and algorithm-imputed details capture trip details and whether the traditional survey-reported collection method may be preferred with regards to some types of travel. This paper considers two measures of travel intensity (survey-reported and GPS-recorded) for two trip purposes (work and non-work) as dependent variables in a joint ordered response model. The empirical analysis uses a sample from the full-study of the 2009 Indianapolis regional household travel survey. Individuals in this sample provided diary details about their travel survey day as well as carried wearable GPS units for the same 24-h period. The empirical results provide important insights regarding differences in measures of travel intensities related to the two different data collection modes (diary and GPS). The results suggest that more research is needed in the development of workplace identification algorithms, that GPS should continue to be used alongside rather than in lieu of the traditional diary approach, and that assignment of individuals to the GPS or diary survey approach should consider demographics and other characteristics.     

A hazard-based approach to modelling the effects of online shopping on intershopping duration

Despite growing prevalence of online shopping, its impacts on mobility are poorly understood. This partially results from the lack of sufficiently detailed data. In this paper we address this gap using consumer panel data, a new dataset for this context. We analyse one year long longitudinal grocery shopping purchase data from London shoppers to investigate the effects of online shopping on overall shopping activity patterns and personal trips. We characterise the temporal structure of shopping demand by means of the duration between shopping episodes using hazard-based duration models. These models have been used to study inter-shopping spells for traditional shopping in the literature, however effects of online shopping were not considered. Here, we differentiate between shopping events and shopping trips. The former refers to all types of shopping activity including both online and in-store, while the latter is restricted to physical shopping trips. Separate models were estimated for each and results suggest potential substitution effects between online and in-store in the context of grocery shopping. We find that having shopped online since the last shopping trip significantly reduces the likelihood of a physical shopping trip. We do not observe the same effect for inter-event durations. Hence, shopping online does not have a significant effect on overall shopping activity frequency, yet affects shopping trip rates. This is a key finding and suggests potential substitution between online shopping and physical trips to the store. Additional insights on which factors, including basket size and demographics, affect inter-shopping durations are also drawn.     

The relationship between land use and intrazonal trip making behaviors: Evidence and implications

This paper addresses the relationship between land use, destination selection, and travel mode choice. Specifically, it focuses on intrazonal trips, a sub-category of trip making where both trip origin and trip destination are contained in the same geographic unit of analysis, using data from the 1994 Household Activity and Travel Diary Survey conducted by Portland Metro. Using multinomial logit and binary logistic models to measure travel mode choice and decision to internalize trips, the evidence supports the conclusions that (1) intrazonal trips characteristics suggest mode choice for these trips might be influenced by urban form, which in turn affects regional trip distribution; (2) there is a threshold effect in the ability of economic diversity/mixed use to alter travel behavior; and (3) greater emphasis to destinations within the area where an individual’s home is located needs to be given in trip distribution models.     

Development of destination choice models for pedestrian travel

Most research on walking behavior has focused on mode choice or walk trip frequency. In contrast, this study is one of the first to analyze and model the destination choice behaviors of pedestrians within an entire region. Using about 4500 walk trips from a 2011 household travel survey in the Portland, Oregon, region, we estimated multinomial logit pedestrian destination choice models for six trip purposes. Independent variables included terms for impedance (walk trip distance), size (employment by type, households), supportive pedestrian environments (parks, a pedestrian index of the environment variable called PIE), barriers to walking (terrain, industrial-type employment), and traveler characteristics. Unique to this study was the use of small-scale destination zone alternatives. Distance was a significant deterrent to pedestrian destination choice, and people in carless or childless households were less sensitive to distance for some purposes. Employment (especially retail) was a strong attractor: doubling the number of jobs nearly doubled the odds of choosing a destination for home-based shopping walk trips. More attractive pedestrian environments were also positively associated with pedestrian destination choice after controlling for other factors. These results shed light on determinants of pedestrian destination choice behaviors, and sensitivities in the models highlight potential policy-levers to increase walking activity. In addition, the destination choice models can be applied in practice within existing regional travel demand models or as pedestrian planning tools to evaluate land use and transportation policy and investment scenarios.     

Beyond the journey to work

This paper analyses the Nationwide Personal Transportation Study (NPTS) surveys of 1977 and 1983–1984 that reveal a remarkable increase in nonwork travel. This growth occurred among all city size classes but was stronger for suburban residents. Also interesting is that the rate of increase in nonwork trips was higher in the peaks (especially in the morning peak) than in the off-peak period. Some, but not all, of these trips may be price-elastic and might be diverted by congestion pricing strategies. The nonwork trip growth is concentrated in the “family and personal” and the “social and recreational” categories. Although higher-income households make more trips than low-income households, the increase in nonwork travel is common to all income groups. The growth in nonwork travel does not appear to be closely associated with the growth in female employment or trips related to the children of working women. The most convincing explanation of the growth in nonwork travel is that the trip cost savings (less time and distance) experienced because of more efficient spatial settlement patterns have provided an incentive to undertake more trips. Another implication is that urban economic models and urban transport policies have overemphasized the journey to work, especially to the central business district (CBD).