共查询到19条相似文献,搜索用时 609 毫秒
1.
2.
3.
随着汽车工业的发展,人们对汽车保险杠的要求也越来越高。今天,轿车前、后保险杠除保持原有的保护功能外,还要追求与车体造型的和谐与统一及本身的轻量化。为了达到上述目的,目前轿车的前、后保险杠采用了塑料保险杠。 相似文献
4.
爱丽舍轿车是神龙汽车公司2002年6月6日才推出的一款新型三厢轿车,该车采用了全新的造型设计,特别是其前保险杠、水晶前大灯、前栅格、翼子板、发动机罩等构成的前部造型,非常动感时尚;车身尾部的后保险杠、行李厢装饰板、尾灯罩、大大的雪铁龙标识,使尾部造型显得稳健大方;车内仪表板采用了全新的造型,优美流畅。悬架系统继承了雪铁龙产品独有的后轮随动转向专利技术,而且 相似文献
5.
SC6350/SC1015X是中日双方联合设计开发的新型厢式微型汽车,具有90年代末期的世界先进水平。其动力性、安全性、经济性、舒适性、环保等各方面都超过了国内现有微车,是目前国内微车的顶级产品。 一、整车造型气派大方、独具个性 该车平头向前突出呈平滑圆弧线,车头前面宽大的保险杠豪放粗狂,整体冲压式车门使整车造型显得稳重、厚实,宽大的全景曲面挡风玻璃,组合式异形前照灯融入了轿车的设计思想。 相似文献
6.
7.
8.
9.
10.
为优化汽车行人保护缓冲吸能装置设计,确保汽车能够通过行人保护碰撞,文章分析了欧盟的行人碰撞保护技术指令2003/102/EC中对轿车前保险杠试验区域的划分,对外观造型中影响行人保护的正面、两侧及下部的造型进行了分析并给出合理建议,在实践的基础上提出了前保险杠中部及下部的缓冲吸能结构的优化设计方案,指出发泡后的聚丙烯具有高冲击能吸收能力等优点,目前被广泛应用于中部缓冲结构.文章为汽车能顺利通过2003/102/EC,提供了详细的设计参考. 相似文献
11.
12.
D. K. Park C. D. Jang S. B. Lee S. J. Heo H. J. Yim M. S. Kim 《International Journal of Automotive Technology》2010,11(4):489-494
This paper presents a design technique to optimize the shape of a vehicle bumper beam that satisfies both the safety requirements
for a front rigid-wall impact and the regulations protecting pedestrians from lower leg injuries caused by bumper impacts.
An intermediate response surface modeling (IRSM) technique was introduced to approximate the non-linear force-displacement
curves obtained from the front impact analysis of a vehicle bumper. The accuracy of the IRSM model was tested by comparing
its results with those of the non-linear finite element analysis. The maximum displacement error between the two models did
not exceed 3%. Using pedestrian impact analyses based on the experimental arrangement of the Plackett-Burman design, the approximate
functions describing the response values acting on the lower legs were calculated. The shape of the bumper beam was optimized
by integrating the IRSM with the force-displacement model and the approximate functions on lower leg impact. The optimization
results satisfied safety regulations on the maximum allowable displacement of the vehicle bumper, and also the regulations
protecting pedestrians from lower leg injuries caused by bumper impacts. 相似文献
13.
14.
由初始交点出发,利用三角Bezier曲面片间的拓扑关系,采用连续跟踪的算法计算复合三角Bezier曲面与平面的交线;对所得的交线通过点对应修正、曲面片间边界点计算、交线两端交点的跟踪、截面线的构造、截面线离散,得到一系列的型值点,从而可构造出与基曲面达到G′连续、结构的过渡曲线面。测试显示,该方法简单可靠,能满足反求工程CAD建模的要求,在曲面造型和加工领域具有广泛的应用潜力。 相似文献
15.
对产品的实物模型进行表面测量,按照逆向工程的过程由测量数据点云完成产品模型的三维CAD建模,在汽车工业的新产品开发中得到了广泛的应用。以汽车变速杆罩盖的三维光学测量和基于Imageware软件的逆向造型过程为例。对基于实物的CAD建模关键技术进行阐述和总结。 相似文献
16.
17.
18.
Until recently, passenger cars have primarily interested in pedestrian protection performance. Nowadays, however, it is important
for a sport-utility vehicle (SUV) to meet the bumper system standards for pedestrian safety. For a SUV bumper system, there
are some difficulties in attaining a high level of pedestrian performance for the lower legform. An SUV has a high bumper
position from the ground level, and the bumper approach angle must also be secured, which has an effect on car insurance fees.
Due to these reasons, it is difficult to meet the pedestrian performance of the lower legform for an SUV. In this paper, a
comparative study was performed on various SUV bumper systems, and a concept model for a SUV bumper system was developed,
which is expected to meet the pedestrian performance by using the Pugh method. The design control factors were defined to
affect the bumper pedestrian performance through the experiences of tests and analyses. For the noise factor to affect the
pedestrian performance, the deviation of the impactor position was selected at the moment of impact. The design control factors
were optimized by using the Taguchi optimization technique. For the Taguchi method, an L18 orthogonal array table of design
control factors was used in the optimization process. Particularly, for the optimization of the bumper corner region, an optimization
analysis was performed three times to meet pedestrian performance. Based on the results of the Taguchi optimization method,
the sensitivity of the bumper design parameters was studied, and a new SUV bumper system is proposed that satisfies the pedestrian
performance of the lower legform. The optimized bumper system should obtain a full Euro-NCAP score of 6 points for the bumper
test. The pedestrian performance of the optimized bumper system is validated by using a CAE (Computer Aided Engineering) analysis,
which has been proven to be in accurate. A comparison between the test and analysis results is shown for the validation of
accuracy. By using the optimized bumper system, the tests and development costs of a bumper can be reduced. 相似文献
19.
汽车前部保险杠的耐撞性及结构优化方法 总被引:4,自引:2,他引:2
根据目前国产车保险杠耐撞性现状,结合江苏丹阳市车船装饰件有限公司的保险杠耐撞性项目,在LS-DYNA中对摆锤撞击保险杠进行了仿真分析。通过对保险杠的壁厚及其中部的两弧半径进行结构优化,提高了保险杠的耐撞能力,为日后保险杠的设计与开发提供了有价值的参考。 相似文献