共查询到20条相似文献,搜索用时 265 毫秒
1.
2.
本文阐述了TTS栈桥大拱的运输方案设计,其中工装的设计体现了循环使用的思想。希望对以后设计大型产品的临时运输工装有一定的参考作用。 相似文献
3.
Z型支撑座工装作为某船厂典型的船用工装设备,在其支撑作业过程中承受较大的船体集中力载荷作用。文章针对该类型工装实际现场使用工况,基于有限元方法对其支撑工装结构型式进行研究分析。通过参数化分析,得到了该类型支撑工装结构尺寸对结构强度的影响,提出并分析了支撑工装结构型式的优化。为类似支撑工装结构设计提供参考。 相似文献
4.
5.
6.
《中国舰船研究》2015,(6)
针对实船侧挂辅机设备的姿态控制问题,开展侧挂辅机设备安装姿态控制工装的结构设计,制定工装操控性、结构稳定性和调整精度的综合设计目标,利用标准件线性导轨和操控螺纹单元实现控制工装的核心功能,完成工装的稳定结构、设备安装结构、操控装置等组件与装配设计。利用仿真分析方法对工装结构进行优化,分析复杂结构在静力加载作用下抵抗变形的能力、可移动结构在运动过程中的结构稳定性、工装的强度和刚度特性,优化控制工装的组件尺寸和配合形式。依据工装的最优结构尺寸,制造工装样机并进行验证试验。结果表明:控制工装侧挂设备姿态调整的精度可以达到设计目标的要求,工装结构功能可行,操作简单,可实现设备安装姿态调整工作简化。 相似文献
7.
8.
9.
10.
11.
在沿海主要港口铁矿石疏港"公转铁"大趋势下,朔黄铁路沿线地区钢铁企业利用朔黄铁路运输铁矿石势在必行。与目前黄骅港综合港区及天津港朔黄铁路返程运输铁矿石相比,黄骅港煤炭港区开展朔黄铁路返程运输铁矿石管理协调更加顺畅,综合物流成本最低,最适宜开展铁矿石运输业务。 相似文献
12.
美国是世界上最大的钢材进口国,对于进口钢材的索赔率同样高居榜首。以在西欧——美湾钢材班轮航线上的工作经验为基础,结合美国法院对钢材索赔的一些观点,探讨了海运钢材货损的主要原因及承运运往美国钢材时减少货损索赔率的一些方法。 相似文献
13.
为缓解天津港的交通压力,东环立交桥完善工程的新建两个匝道需跨越进港铁路专线。其中跨铁路部分的钢箱梁吊装总长度256.6m,总质量527t,曲率半径120m。为不影响铁路运输而又方便施工,对施工方案进行了比选和优化,并对分段钢箱梁的吊点和吊装临时支墩进行了设计验算;介绍了整个安全吊装过程和提出了今后类似工程的建议。实践证明:设计方案及吊装技术是成功的。 相似文献
14.
15.
16.
17.
A. N. Perakis 《Maritime Policy and Management》1999,26(3):265-278
Over the last several years, the US inland waterway transportation industry has significantly reduced its fuel consumption and improved its efficiency, with the side effect of less fuel tax collected per ton of cargo carried, despite the increase in cargo traffic. Fuel tax revenues are used for rehabilitation and construction projects in the inland waterway system, hence the US Army Corps of Engineers, providing us with relevant data over the interval in question, asked us to investigate this surprising reduction, and determine the main technical and fleet management improvements that caused it. Our research involved both visits with most major US inland waterway fleets, interviews with their engineers and managers, as well as statistical analysis of the above data. Technical improvements (such as engine plant efficiency increases), lighter, stronger building materials (such as light steel), and improved designs for better hydrodynamics, were not as important compared to management improvements (such as the use of computer-aided monitoring systems and advanced telecommunications, optimized tow configuration and speed, and increased triangular trips as opposed to simple round trips with returns empty). In addition, the demand for less expensive, imported steel for the US has resulted in an increased percentage of fully loaded return trips from New Orleans to the US Midwest, and hence also in increased fleet utilization. 相似文献
18.
19.
20.
为适应钢材货源结构的变化,提高钢材货装卸质量,秦皇岛港对钢材装卸工艺及工属具进行改进和优化。分别介绍了钢板、铜板、型钢、盘条和卷钢装卸改进后的工艺,并将新旧装卸工艺作了比较,可供同行借鉴。 相似文献