破损船体非对称弯曲极限强度分析及可靠性评估

在船体发生破损后,其剩余有效剖面是非对称的,船体还可能倾斜。本文首先对破损船体非对称弯曲进行了弹性和塑性分析,在此基础上假设了破损船体发生整体破坏时的剖面应力分布,给出了破损船体非对称弯曲极限强度分析方法,并采用了比较精细的方法计算加筋板格的屈曲极限强度。以箱型梁模型和超大型油船为例,将本文的计算结果与试验、ＩＳＵＭ法及解析公式的结果进行了比较。基于破损船体极限强度,结合重要性样本法,对６５,００     

立管碰撞损伤状态下极限强度分析方法研究

以船与立管碰撞为研究对象,采用非线性有限元法对立管受船舶碰撞作用下的结构损伤进行分析。在此基础上考虑立管结构凹坑损伤状态,建立极限强度分析方法,并对立管有无损伤等情况进行对比分析。计算分析表明,凹坑损伤会降低立管的极限强度;减小立管壁厚会降低立管的极限强度,且壁厚对凹坑损伤立管极限张力的影响明显小于极限弯矩;顶张力在一定范围内,也可以减小凹坑损伤对立管极限强度的影响。     

初始缺陷对加筋板结构极限强度的影响研究

采用非线性有限元软件Ansys研究包含3种初始缺陷加筋板结构在单轴压缩载荷作用下极限强度的变化趋势,即初始变形、残余应力和凹陷.以单筋单跨加筋板模型为研究对象,考虑初始变形,不同半径及不同速度的撞击球所形成的凹陷及残余应力对加筋板极限强度的影响.结果表明,初始缺陷的存在降低了结构的极限承载力,而且缺陷的叠加作用比单独缺陷存在时对结构极限强度的影响大;加筋板的极限强度随着凹陷深度的加深而减小;3种初始缺陷中,残余应力相对于初始变形和凹陷对结构极限强度的削弱影响更大.     

基于试验获取主应力应变曲线的油船极限强度评估研究(英文)

A geometrically similar scaling was made from small-scale specimen to full-scale stiffened panels and then their collapse behaviour is investigated. It is considered that the stiffened panel compressive ultimate strength test was designed according to geometrical scaling laws so that the output of the test could be used as representative of the stiffened panels of the compressive zone of a tanker hull subjected to vertical bending moment. The ultimate strength of a tanker hull is analysed by a FE analysis using the experimentally developed master stress-strain curves which are obtained by the beam tension test and the compressive test of the stiffened panel, and are then compared with the result achieved by the progressive collapse method.     

Ultimate strength assessment of a tanker hull based on experimentally developed master curves

A geometrically similar scaling was made from small-scale specimen to full-scale stiffened panels and then their collapse behaviour is investigated. It is considered that the stiffened panel compressive ultimate strength test was designed according to geometrical scaling laws so that the output of the test could be used as representative of the stiffened panels of the compressive zone of a tanker hull subjected to vertical bending moment. The ultimate strength of a tanker hull is analysed by a FE analysis using the experimentally developed master stress-strain curves which are obtained by the beam tension test and the compressive test of the stiffened panel, and are then compared with the result achieved by the progressive collapse method.     

A detailed finite element investigation of the effects of local lateral high-velocity impacts on the ultimate strength of unstiffened steel plates subjected to uniaxial in-plane compression

In this paper, the ultimate strength of unstiffened steel plates under uniaxial in-plane compression is numerically studied considering the local lateral impact of a rigid-body impactor. The plates are made of mild steel, where its behaviour is modelled by using the Johnson-Cook material model. The material parameters of the Johnson-Cook material model calibrated by the authors were employed for predicting the behaviour of the target in order to numerically reproduce the impact tests. The value of average in-plane stress of the plates is determined accounting for the collision of rigid-body impactor with masses of 50–150 gr and velocities of 400–1200 m/s. Moreover, the effects of stress waves induced as a result of lateral impact of the rigid-body impactor on the ultimate strength of the plates under uniaxial in-plane compression are also assessed. The results indicate that the ultimate strength of the plate decreases due to stress-wave creation and thus, it is required to take that into account. Besides, it is revealed that assuming the final damaged state of the plate after being laterally impacted by the rigid-body impactor as an initial condition, does not yield a correct response when evaluating its ultimate compressive strength under uniaxial in-plane compression.     

Numerical investigation on the ultimate strength behaviour and assessment of continuous hull plate under combined biaxial cyclic loads and lateral pressure

The ultimate strength of continuous hull plate under combined biaxial cyclic loads and lateral pressure is investigated in the present paper by using nonlinear finite element method. Geometric nonlinearity due to large deflection and material nonlinearity induced by kinematic hardening and isotropic hardening are both accounted for. A parametric study is designed and completed to examine the longitudinal ultimate compressive strength behaviours in the cycles on the basis of a large number of load-shortening curves. Effects of series of parameters especially the plate slenderness ratio, transverse cyclic compression, lateral pressure and cycle number are analyzed with details. It is found that the strength characteristic and collapse mode are highly affected by the coupling influence of the mentioned factors as well material behaviours. A dimensionless unified formulation as a function of the decisive factors is empirically proposed to accurately assess the ultimate strength of continuous hull plate in various cycles.     

损伤舰船结构安全性评估

损伤舰船的承载能力和环境载荷涉及许多不确定因素。为评估某舰损伤情况下的结构安全性,提出了基于极限强度和极值载荷的损伤舰船结构可靠性模型,分析了损伤舰船极限强度和极值载荷的统计特征,采用拉丁超立方抽样与条件期望和对偶变数相结合的方法进行可靠性分析。可靠性分析结果表明损伤舰船目标裕度可取0.75。     

破损船体剩余强度衡准研究

本文研究了船体破损非对称淹水和刚度损失引起的船体外载荷变化,并利用破损船体非对称弯曲极限强度计算方法详细分析碰撞、搁浅和爆炸破损对船体极限强度的影响.然后基于破损船体极值载荷和极限强度,给出破损船体剩余强度衡准,并对破损船体临界海况进行预报.     

复合材料船体纵向极限强度可靠性分析

把船体甲板或船底板结构视为是一系列加筋板单元的组合，然后利用复合材料梁柱理论计算船体加筋板单元构件的极限承载能力，最后用Smith法计算复合材料船体的极限承载能力。由于复合材料船体纵向极限强度的极限状态方程不能简单地用船体各参数显式表达，故将近年发展起来的响应面法与JC法相结合，对复合材料船体纵向极限强度进行了可靠性分析。并讨论了影响船体纵向极限强度可靠性各变量的敏感性。     

Experimental and numerical study of localized pitting effect on compressive behavior of tubular members

Locally pitted tubular members are usually considered as stub columns to assess the ultimate strength. However, it is not suitable for those with relatively larger slenderness ratios as their failure behavior is more complex and closely related to corrosion features of localized pitting. This paper presents compressive column tests on locally pitted tubular members of a moderate slenderness ratio. Corrosion pits were artificially introduced on local surface of the members, forming corrosion patches with various corrosion features. A numerical modelling method was proposed to reproduce the test specimens. Localized pitting damage was proven to cause substantial declines in the load deformation capacity and ultimate strength, and have a significant effect on the failure mode. The failure of a pitted member is mostly initiated by local buckling after yielding occurs in the corrosion patch, concurrent with pitting closure, and even shear cracking of member wall due to the perforated pits. Moreover, shape change of the corrosion patch most likely results in the failure mode to alter from column buckling to local buckling or interactive buckling. The shape ratio of the corrosion patch is one of the critical factor to influence the ultimate strength of locally pitted members. The proposed modelling method is applicable for extensive stochastic simulations so as to develop an empirical formula and to clarify the probabilistic characteristics of ultimate strength.     

矿砂船舱口间甲板结构的可靠性评估

文章针对一艘舱口间甲板发生屈曲破坏的矿砂船,对其舱口间甲板结构进行横向压缩强度分析和可靠性评估。为建立一套初步的可靠性评估方法,首先,采用半解析公式计算舱口间甲板结构在不同破坏模式下的压缩极限强度,其最小值即为结构的临界应力,为强度评估提供依据。其次,基于改进的一次二阶矩法编写FOR⁃TRAN子程序,计算结构的可靠性指标,建立了基于舱口间甲板的横向压缩强度的可靠性分析程序。综合评估结果表明,舱口间甲板结构的强度储备不足以抵抗外部载荷,屈曲破坏发生起始于檐板和舱口间甲板,这与目标船的事故分析报告中的屈曲现象吻合。根据舱口间甲板结构的强度和可靠性评估结果,采取三种加强方案,权衡结构安全因子和结构重量从而得出较优的修复加强方案。     

Research on the dynamic buckling of a typical deck grillage structure subjected to in-plane impact Load

The dynamic buckling of the main deck grillage would result in the total collapse of the ship hull subjected to a far-filed underwater explosion. This dynamic buckling is mainly due to the dynamic moment of the ship hull when the ship hull experiences a sudden movement under impact load from the explosion. In order to investigate the ultimate strength of a typical deck grillage under quasi-static and dynamic in-plane compressive load, a structure model, in which the real constrained condition of the deck grillage was taken into consideration, was designed and manufactured. The quasi-static ultimate strength and damage mode of the deck grillage under in-plane compressive load was experimentally investigated. The Finite Element Method (FEM) was employed to predict the ultimate strength of the deck grillage subjected to quasi-static in-plane compressive load, and was validated by comparing the results from experimental tests and numerical simulations. In addition, the numerical simulations of dynamic buckling of the same model under in-plane impact load was performed, in which the influences of the load amplitude and the frequency of dynamic impact load, as well as the initial stress and deflection induced by wave load on the ultimate strength and failure mode were investigated. The results show that the dynamic buckling mode is quite different from the failure mode of the structure subjected to quasi-static in-plane compressive load. The displacements of deck edge in the vertical direction and the axial displacements are getting larger with the decrease of impact frequency. Besides, it is found that the dynamic buckling strength roughly linearly decreased with the increase of initial proportion of the static ultimate strength P₀. The conclusions drawn from the researches of this paper would help better designing of the ship structure under impact loads.     

破损船体极限强度非线性有限元分析

本文基于通用有限元系统,结合船体破损机理和初始缺陷处理方法,建立船体极限强度非线性有限元分析的完整框架.利用对水面舰船和双壳油船极限强度模型试验的比较验证,合理解决非线性有限元分析的关键技术,并对完整和破损船体极限强度进行非线性有限元法分析.然后,在模型试验和非线性有限元分析的基础上提出面向设计的适合破损船体和双向弯曲状态的船体极限强度分析的改进解析方法.     

核发电船堆舱破损状态极限强度分析

对于核发电船而言,考虑到核反应堆的安全性问题,船体结构即使发生破坏,也要保证整体的强度,所以有必要针对破损后的船体梁进行极限强度分析。在船体剩余极限强度分析中,核反应堆舱所处舱段的极限承载能力是整个核发电船极限强度分析的关键。文章研究的重点集中在核反应堆舱段,在该舱段选取危险剖面进行剩余极限强度分析。同时,采用中和轴偏转的Smith方法对反应堆舱段进行破损船体极限强度计算,并结合HCSR规范对其进行评估。根据该核电船作业海域的海况资料,对其遭遇的波浪载荷进行长期极值预报,进而得出该船破损情况下的设计极限弯矩。结果表明,该船的设计极限弯矩满足规范中的要求,为基于规范的特定海域中的特定船型剩余强度评估提供参考。     

Axial compressive behavior of stainless steel tube confined concrete column piers

The steel tube confined concrete (STCC) column piers of marine structures have been proposed in recent years. The main advantages of STCC piers include the convenient construction process and improved core concrete strength. This research presents an experimental investigation on stainless steel tube confined concrete (SSTCC) column piers subjected to axial loading. Thirty two specimens were prepared and tested. Test variables included section shape, steel tube thickness, and concrete strength. Failure modes, axial ultimate compressive strength, strain characteristics, rigidity, confinement effect, and ductility were comprehensively investigated. Test results demonstrated that the main failure modes for circular and square specimens were concrete shear failure and steel tube fracture caused by concrete deformation, respectively. The axial compressive ultimate strength was affected by the tube thickness and concrete strength. The ultimate strength increased with the increase in the confinement factor, and the increasing ratio of the circular specimens was five times to that of square specimens. The differences in axial ultimate compressive strength of SSTCC column piers, carbon steel tube confined concrete column piers, and concrete filled steel tube column piers were also analyzed. Increasing tube thickness could increase the ductility and rigidity of the specimens. Moreover, axial ultimate compressive strengths were calculated and discussed based on different calculation models.     

基于完整船体极限强度和搁浅剩余强度的协调共同结构规范对比分析

文章基于Smith法,根据国际船级社协会发布的2013版协调共同结构规范(HCSR)中破损模型、失效模式和载荷模型,考虑材料屈服、结构单元屈曲及后屈曲的特性,应用FORTRAN程序设计语言编写船体极限强度计算程序,以某76000吨散货船为算例,对完整船体的极限强度进行计算,对搁浅状态下破损船体的剩余强度进行计算并校核承载能力。通过在中拱和中垂工况下与其他规范的对比验证,2013版HCSR指定的剩余强度校核公式及船体梁载荷计算公式中选取的安全系数要求更高,校核更严格。     

Buckling and ultimate capability of plates and stiffened panels in axial compression

This paper presents extensive non-linear finite element (FE) analysis and formulation development work carried out on the ultimate compressive strength of plates and stiffened panels of ship structures. A review of contemporary designs for large ships was carried out. The existing formulae for plate ultimate compressive strength were reviewed and compared with non-linear FE analysis results. A semi-analytical formula for ultimate compressive strength assessments of stiffened panels was proposed and is described. The developed formula was verified against results using ABAQUS non-linear FE software for a series of 61 stiffened panels and a good agreement between the proposed formula and FE results were achieved. The method was verified against a large number of published FE results and was also compared with 58 experimental results. The developed method was also applied to the deck and bottom structures for a range of various sizes oil tankers and bulk carriers.     

受损船体极限强度分析与可靠性评估

对预报船舶极限强度的解析公式作局部改进，使其更有效地用于评估或预报现代船舶剩余极限强度。将该方法同MVFOSM相结合，对一艘油船进行了完整船体（新建／老龄）与受损结构（搁浅／碰撞）极限总纵强度分析和可靠性评估及预报；某些结论可作为深入研究剩余强度理论或指导实船结构设计的参考。     

破损散货船剩余极限强度的评估与分析

船体发生破损后.其剩余有效剖面是非对称的,船体还可能倾斜.根据IACS共同规范(CSR),采用逐步破坏分析法计算船体梁在不同破损情况下的剩余极限强度,同时编制了计算程序.对1艘散货船在完整和不同破损状态下的船体结构安全性进行了系统评估,并得到了一些有意义的结论.