Optimization of headways with stop‐skipping control: a case study of bus rapid transit system

Bus rapid transit system is designed to provide high‐quality and cost‐efficient passenger transportation services. In order to achieve this design objective, effective scheduling strategies are required. This research aims at improving the operation efficiency and service quality of a BRT system through integrated optimization of its service headways and stop‐skipping strategy. Based on cost analysis for both passengers and operation agencies, an optimization model is established. A genetic algorithms based algorithm and an application‐oriented solution method are developed. Beijing BRT Line 2 has been chosen as a case study, and the effectiveness of the optimal headways with stop‐skipping services under different demand levels has been analyzed. The results has shown that, at a certain demand level, the proposed operating strategy can be most advantageous for passengers with an accepted increase of operating costs, under which the optimum headway is between 3.5 and 5.5 min for stop‐skipping services during the morning peak hour depending on the demand with the provision of stop‐skipping services. The effectiveness of the optimal headways with stop‐skipping services is compared with those of existing headways and optimal headways without stop‐skipping services. The results show that operating strategies under the optimal headways with stop‐skipping services outperforms the other two operating strategies with respect to total costs and in‐vehicle time for passengers. Copyright © 2014 John Wiley & Sons, Ltd.     

Estimating travel time functions for urban roads: options and issues

Travel time functions specify the relationship between the travel time on a road and the volume of traffic on the road. Until recently, the parameters of travel time functions were rarely estimated in practice; however, a compelling case can be made for the empirical examination of these functions. This paper reviews, and qualitatively evaluates, a range of options for developing a set of travel time functions. A hierarchy of travel time functions is defined based on four levels of network detail: area, corridor, route and link. This hierarchy is illustrated by considering the development of travel time functions for Adelaide. Alternative sources of data for estimating travel time functions are identified.

In general, the costs and benefits increase as the travel time functions are estimated at finer levels of network detail. The costs of developing travel time functions include data acquisition costs and analysis costs. The benefits include the potential for reducing prediction errors, the degree of application flexibility and the policy sensitivity of the travel time functions.     

Design and implementation of efficient transit networks: Procedure, case study and validity test

This paper presents and tests a method to design high-performance transit networks. The method produces conceptual plans for geometric idealizations of a particular city that are later adapted to the real conditions. These conceptual plans are generalizations of the hybrid network concept proposed in Daganzo (2010). The best plan for a specific application is chosen via optimization. The objective function is composed of analytic formulae for a concept’s agency cost and user level of service. These formulae include as parameters key demand-side attributes of the city, assumed to be rectangular, and supply-side attributes of the transit technology. They also include as decision variables the system’s line and stop spacings, the degree to which it focuses passenger trips on the city center, and the service headway. These decision variables are sufficient to define an idealized geometric layout of the system and an operating plan. This layout-operating plan is then used as a design target when developing the real, detailed master plan. Ultimately, the latter is simulated to obtain more accurate cost and level of service estimates.This process has been applied to design a high performance bus (HPB) network for Barcelona (Spain). The idealized solution for Barcelona includes 182 km of one-way infrastructure, uses 250 vehicles and costs 42,489 €/h to build and run. These figures only amount to about one third of the agency resources and cost currently used to provide bus service. A detailed design that resembles this target and conforms to the peculiarities of the city is also presented and simulated. The agency cost and user level of service metrics of the simulated system differ from those of the idealized model by less than 10%. Although the designed and simulated HPB systems provide sub-optimal spatial coverage because Barcelona lacks suitable streets, the level of service is good. Simulations suggest that if the proposed system was implemented side-by-side with the current one, it would capture most of the demand.     

Bus congestion, optimal infrastructure investment and the choice of a fare collection system in dedicated bus corridors

Microeconomic optimisation of scheduled public transport operations has traditionally focused on finding optimal values for the frequency of service, capacity of vehicles, number of lines and distance between stops. In addition, however, there exist other elements in the system that present a trade-off between the interests of users and operators that have not received attention in the literature, such as the optimal selection of a fare payment system and a designed running speed (i.e., the cruising speed that buses maintain in between two consecutive stops). Alternative fare payment methods (e.g., on-board and off-board, payment by cash, magnetic strip or smart card) have different boarding times and capital costs, with the more efficient systems such as a contactless smart card imposing higher amounts of capital investment. Based on empirical data from several Bus Rapid Transit systems around the world, we also find that there is a positive relationship between infrastructure cost per kilometre and commercial speed (including stops), achieved by the buses, which we further postulate as a linear relationship between infrastructure investment and running speed. Given this context, we develop a microeconomic model for the operation of a bus corridor that minimises total cost (users and operator) and has five decision variables: frequency, capacity of vehicles, station spacing, fare payment system and running speed, thus extending the traditional framework. Congestion, induced by bus frequency, plays an important role in the design of the system, as queues develop behind high demand bus stops when the frequency is high. We show that (i) an off-board fare payment system is the most cost effective in the majority of circumstances; (ii) bus congestion results in decreased frequency while fare and bus capacity increase, and (iii) the optimal running speed grows with the logarithm of demand.     

Importance of user perception in evaluating level of service for bus transit for a developing country like India: a review

Assessment of service quality in bus transit planning has received due attention in recent years from the viewpoint of optimal service allocation. The concept of level of service (LOS) has emerged as an effective tool to measure quality of services. Service-quality assessment provides operators with knowledge on users' satisfaction with existing services and their expected LOSs. The importance of user perception towards assessment of LOS has been acknowledged by researchers. While LOS standards for public transportation have been established by the Transportation Research Board in the USA, researchers have questioned the applicability of these standards in the context of different geographic regions. Since the service delivery environment differs between developed and developing nations, the user perception of service quality varies between these economic regions. Substantial research has been carried out in the context of both developed and developing nations, to identify the bus transit service parameters that affect users' perceived service quality; however, little research exists that establishes LOS thresholds for bus transit, based on user perception. This paper reviews the concept of LOS, describes the importance of user perception in assessment of service quality and identifies the need to establish LOS thresholds for bus transit from user perception for developing countries.     

Variation in the value of travel time savings and its impact on the benefits of managed lanes

This paper examines the variation in the value of travel time savings (VTTS) for travelers with a managed lane (ML) option when taking an ordinary trip versus a trip that is unusual in some way. VTTS estimates vary substantially depending on the urgency of the trip made. At the low end, the mean VTTS for a traveler who wants to make extra stops and still arrive on time is approximately 10% higher than that for an ordinary trip. At the high end, a traveler running late for an appointment shows a mean VTTS that is approximately 300% higher than that for an ordinary trip. These estimates vary widely over the population of travelers. In light of these variations, the value of an uncongested travel alternative (such as MLs) is examined and found to be greatly undervalued if using typical VTTS estimates.     

Estimating the environmental benefits of ride-sharing: A case study of Dublin

Ride-sharing has often been cited as a successful method to reduce congestion and green house gas emissions. This paper examines the patterns of ride-sharing, in Dublin, and estimates the environmental benefits of ride-sharing both in terms of reductions in emissions and the vehicle kilometres travelled. Data from the 2006 Census of Ireland is used to examine the travel patterns of those that ride-share. The COPERT4 model is used in this paper to estimate the CO₂ emissions saved by ride-sharing.     

Evaluation of a cellular phone-based system for measurements of traffic speeds and travel times: A case study from Israel

The purpose of this paper is to examine the performance of a new operational system for measuring traffic speeds and travel times which is based on information from a cellular phone service provider. Cellular measurements are compared with those obtained by dual magnetic loop detectors. The comparison uses data for a busy 14 km freeway with 10 interchanges, in both directions, during January–March of 2005. The dataset contains 1 284 587 valid loop detector speed measurements and 440 331 valid measurements from the cellular system, each measurement referring to a 5 min interval. During one week in this period, 25 floating car measurements were conducted as additional comparison observations. The analyses include visual, graphical, and statistical techniques; focusing in particular on comparisons of speed patterns in the time–space domain. The main finding is that there is a good match between the two measurement methods, indicating that the cellular phone-based system can be useful for various practical applications such as advanced traveler information systems and evaluating system performance for modeling and planning.     

Aggregation and travel time calculation over large scale traffic networks: An empiric study on the Grenoble City

In this paper we consider aggregation technique to reduce the complexity of large-scale traffic network. In particular, we consider the city of Grenoble and show that, by clustering adjacent sections based on a similarity of speed condition, it is possible to cut down the complexity of the network without loosing crucial and intrinsic information. To this end, we consider travel time computation as a metric of comparison between the original graph and the reduced one: for each cluster we define four attributes (average speed, primary and secondary length and heading) and show that, in case of an aggregation rate of 95%, these attributes are sufficient in order to maintain the travel time error below the 25%.     

Investigating travel utility elements in association with travel time and mode choice: the case of Seoul,South Korea

In this paper, travel utility is conceptualized into the elements of disutility, or derived utility, and positive utility, which includes synergistic and intrinsic utility, and then analyzed in terms of the effects of these elements on weekly travel time according to three travel modes – the automobile, public transit, and nonmotorized modes – and on the choice of the annually most used mode. Linear regressions on mode-specific travel time and a multinomial logistic regression on mode choice show that, compared to life situation and land-use characteristics, utility elements are among the strongest travel determinants. Specifically, while some utility elements contribute exclusively to shifting the mode of travel and others to increasing nonmotorized travel, modal shift is most strongly affected by a disutility element, trip timeliness, and the increase in nonmotorized travel by a positive utility element, amenities.     

Understanding the impacts of a combination of service improvement strategies on bus running time and passenger’s perception

Transit agencies implement many strategies in order to provide an attractive transportation service. This article aims to evaluate the impacts of implementing a combination of strategies, designed to improve the bus transit service, on running time and passenger satisfaction. These strategies include using smart card fare collection, introducing limited-stop bus service, implementing reserved bus lanes, using articulated buses, and implementing transit signal priority (TSP). This study uses stop-level data collected from the Société de transport de Montréal (STM)’s automatic vehicle location (AVL) and automatic passenger count (APC) systems, in Montréal, Canada. The combination of these strategies has lead to a 10.5% decline in running time along the limited stop service compared to the regular service. The regular route running time has increased by 1% on average compared to the initial time period. The study also shows that riders are generally satisfied with the service improvements. They tend to overestimate the savings associated with the implementation of this combination of strategies by 3.5-6.0 min and by 2.5-4.1 min for both the regular route and the limited stop service, respectively. This study helps transit planners and policy makers to better understand the effects of implementing a combination of strategies to improve running time and passenger’s perception of these changes in service.     

Use characteristics and demographics of rural transit riders: a case study in Tennessee

Intercity bus (ICB), deviated fixed route transit (DFRT) and demand responsive transit (DRT) are three major modes of rural public transportation. This paper focuses on the characteristics and motivations of DFRT and DRT riders, compared to non-riders, in Tennessee. A rural DFRT rider survey, a rural DRT rider survey and a rural (non-rider) resident survey were performed. It is found that DFRT and DRT riders have similar demographics to ICB riders. The most common trip purpose for DFRT and DRT passengers is medical care, which is different from ICB trips. Ninety percent of the riders have difficulty finding alternative transportation modes, suggesting they are captive riders, not choice riders. Regression results indicate that people choosing transit modes tend to have lower personal and household income, own fewer cars, to not be homeowners, and be of non-white race. Rural residents who receive more education are more likely to be open-minded to use rural transit.     

The planning and analysis of a new group rapid transit system: the SkyCabs monobeam system in Auckland

This paper examines a case study of the SkyCabs system as a way to alleviate some of the traffic problems of Auckland, New Zealand. SkyCabs is an elevated two-way monobeam carrying light eight-seater cabs on tracks on each side of the beam, available on demand, providing fast, pollution-free, unimpeded travel above the footpath with panoramic views of the city. The aim of this study is to investigate the attractiveness of implementing the SkyCabs system to and from Auckland central business district (CBD) and Auckland international airport by examining four variables: different routes, different number of stops/stations, different passenger demand levels, and different number of cabs in the system. The analysis utilizes geographical information system and simulation tools for the various scenarios considered. The results show that it is possible to assess the cost–benefit of alternative routes in terms of those four variables and rate of return on investment.     

Application of the support vector machine and heuristic k-shortest path algorithm to determine the most eco-friendly path with a travel time constraint

This study aims to determine an eco-friendly path that results in minimum CO₂ emissions while satisfying a specified budget for travel time. First, an aggregated CO₂ emission model for light-duty cars is developed in a link-based level using a support vector machine. Second, a heuristic k-shortest path algorithm is proposed to solve the constrained shortest path problem. Finally, the CO₂ emission model and the proposed eco-routing model are validated in a real-world network. Specifically, the benefit of the trade-off between CO₂ emission reduction and the travel time budget is discussed by carrying out sensitivity analysis on a network-wide scale. A greater spare time budget may enable the eco-routing to search for the most eco-friendly path with higher probability. Compared to the original routes selected by travelers, the eco-friendly routes can save an average of 11% of CO₂ emissions for the trip OD pairs with a straight distance between 6 km and 9 km when the travel time budget is set to 10% above the least travel time. The CO₂ emission can also be reduced to some degree for other OD pairs by using eco-routing. Furthermore, the impact of market penetration of eco-routing users is quantified on the potential benefit for the environment and travel-time saving.     

Does Bus Rapid Transit Influence Urban Land Development and Property Values: A Review of the Literature

Abstract

Despite the proliferation of bus rapid transit (BRT) systems over the past few decades across developed and developing world cities, the impacts across these systems on the urban spatial development and property markets have not been comprehensively studied. The current paper attempts to fill this gap in the literature by reviewing the methodologies, underlying theories, and findings presented in the individual academic studies on BRT land-use and price impacts, mostly drawing on those that have focused on Latin American and Asian systems. The review shows that the land-use and value impacts have been less uniform across systems compared to such operational performance metrics as speed and travel time improvements. While predominantly relying on cross-sectional modeling techniques, the approaches used to evaluate land-use changes induced by the transit systems are not uniform either, with only some studies explicitly measuring changes in types of land use as opposed to simply land or rental price. The study also concludes that more rigorous evaluation is needed as to whether the BRT systems have improved accessibility for the populations that inhabited the corridors previously or whether, instead, the desired land value increases have in fact resulted in significant population displacement.     

Investigating the impact of stochastic vehicle arrivals to optimal stop spacing and headway for a feeder bus route

Stop spacing and service frequency (i.e., the inverse of headway) are key elements in transit service planning. The trade‐offs between increasing accessibility and reducing travel time, which affect transit system performance, need to be carefully evaluated. The objective of this study is to optimize stop spacing and headway for a feeder bus route, considering the relationship between the variance of inter‐arrival time (VIAT), which yields the minimum total cost (including user and operator costs). A solution algorithm, called successive substitution, is adapted to efficiently search for the optimal solutions. In a numerical example, the developed model is applied to planning a feeder bus route in Newark, New Jersey. The results indicate that the optimal stop spacing should be longer that those suggested by previous studies where the impact of VIAT was ignored. Reducing VIAT via certain operational control strategies (i.e., holding/stop‐skipping, transit signal priority) may shorten stop spacing and improve accessibility. Copyright © 2014 John Wiley & Sons, Ltd.     

Defining the functional and physical compatibility of a modernized tramway rolling stock with a newly planned LRT system: a case study of Belgrade

According to the Belgrade Master Plan for 2021, the public transportation system for the city and its region will include three rail modes: a modernized existing tramway, regional rail, and a new light rail transit (LRT) mode. In the coming years all three rail modes should be developed simultaneously and in a coordinated manner. The introduction of LRT is to be realized in several phases, and its first line will partially follow the alignment of an existing tramway line. As the present tramway vehicles are obsolete, new rolling stock must be designed and purchased to be compatible with many of the elements of the LRT. Ways to adjust the new tramways to the LRT rolling stock represent the central topic of this paper. The basic technical and operating characteristics of the new tramway are defined with respect to their required compatibility with the LRT stock and infrastructure.     

Short-term prediction of border crossing time and traffic volume for commercial trucks: A case study for the Ambassador Bridge

Short-term forecasting of traffic characteristics, such as traffic flow, speed, travel time, and queue length, has gained considerable attention from transportation researchers and practitioners over past three decades. While past studies primarily focused on traffic characteristics on freeways or urban arterials this study places particular emphasis on modeling the crossing time over one of the busiest US–Canada bridges, the Ambassador Bridge. Using a month-long volume data from Remote Traffic Microwave Sensors and a yearlong Global Positioning System data for crossing time two sets of ANN models are designed, trained, and validated to perform short-term predictions of (1) the volume of trucks crossing the Ambassador Bridge and (2) the time it takes for the trucks to cross the bridge from one side to the other. The prediction of crossing time is contingent on truck volume on the bridge and therefore separate ANN models were trained to predict the volume. A multilayer feedforward neural network with backpropagation approach was used to train the ANN models. Predicted crossing times from the ANNs have a high correlation with the observed values. Evaluation indicators further confirmed the high forecasting capability of the trained ANN models. The ANN models from this study could be used for short-term forecasting of crossing time that would support operations of ITS technologies.     

Quantifying the environmental and economic benefits of cooperation: A case study in temperature-controlled food logistics

Inefficient road transportation causes unnecessary costs and polluting emissions. This problem is even more severe in refrigerated transportation, in which temperature control is used to guarantee the quality of the products. Organizing logistics cooperatively can help decrease both the environmental and the economic impacts. In Joint Route Planning (JRP) cooperation, suppliers and customers jointly optimize routing decisions so that cost and emissions are minimized. Vendor Managed Inventory (VMI) cooperation extends JRP cooperation by optimizing routing and inventory planning decisions simultaneously. However, in addition to their economic advantages, VMI and JRP may also yield environmental benefits. To test this assertion, we perform a case study on cooperation between a number of supermarket chains in the Netherlands. The data of this case study are analyzed to quantify both the economic and environmental benefits of implementing cooperation via JRP and VMI, using vehicle routing and an inventory routing models. We found that JRP cooperation can substantially reduce cost and emissions compared with uncooperative routing. In addition, VMI cooperation can further reduce cost and emissions, but minimizing cost and minimizing emissions no longer result in the same solution and there is a trade-off to be made.     

From user equilibrium to system optimum: a literature review on the role of travel information,bounded rationality and non-selfish behaviour at the network and individual levels

Travel information continues to receive significant attention in the field of travel behaviour research, as it is expected to help reduce congestion by directing the network state from a user equilibrium towards a more efficient system optimum. This literature review contributes to the existing literature in at least two ways. First, it considers both the individual perspective and the network perspective when assessing the potential effects of travel information, in contrast to earlier studies. Secondly, it highlights the role of bounded rationality as well as that of non-selfish behaviour in route choice and in response to information, complementing earlier reviews that mostly focused on bounded rationality only. It is concluded that information strategies should be tailor-made to an individual's level of rationality as well as level of selfishness in order to approach system-optimal conditions on the network level. Moreover, initial ideas and future research directions are provided for assessing the potential of travel information in order to improve network efficiency of existing road networks.