不锈钢攻丝技术的研究

从国内外不锈钢攻丝的特点出发，对丝锥结构的改进设计，新型丝锥材料的引入和振动攻丝工艺方法等多个方面的攻丝效果进行了分析，从而得出有利于不锈钢攻丝的丝锥结构参数，丝锥材料和工艺方法，为生产中不锈钢攻丝提供经济可行的思路。     

钛合金螺孔攻丝问题解决方法分析

本文针对船用钛合金结构件螺孔攻丝加工困难的情况，分析了钛合金螺孔攻丝时存在的各种现象，并从通过丝锥的修磨，专用丝锥的设计、工艺等方面分析提出了相应的解决措施。     

SAF2205双相不锈钢的焊接技术

双相不锈钢是一种实际应用历史不长,但却具有广阔发展前景的新型耐蚀材料.本文简要介绍了双相不锈钢的基本知识、实践应用、可焊性以及焊接工艺等.通过对SAF2205级别Sandvik双相不锈钢进行不同的焊接试验,以及焊后机械性能和腐蚀性能的试验以及焊缝和热影响区金相组织成分的定性定量分析,得出了焊接SAF2205级别Sandvik双相不锈钢合理的焊接方法、接头形式、焊接参数、填充金属和保护气体,总结出只要注意选择双相不锈钢的焊接参数,采取合适的焊接工艺就能获得合格的焊接接头的结论.这些对今后的工程实际具有指导意义.     

化学品船修理中的不锈钢复合板焊接探讨

不锈钢复合板是化学品船中常用的一种材料,其焊接是化学品船修理的关键技术之一。通过分析不锈钢复合板的焊接特点、焊接注意事项和主要焊接参数的选取,探讨了化学品船舶修理中的不锈钢复合板焊接工艺。     

双相不锈钢焊接在造船实践中的应用

对比、评定双相不锈钢各种焊接形式的工艺和性能，为造船领域使用双相不锈钢材料提供可靠的依据和经验。     

2205双相不锈钢焊接工艺研究

分析2205双相不锈钢的焊接特点和焊接工艺,分别采用药芯焊丝CO2半自动焊(FCAW)、手工电弧焊(SMAW)和埋弧自动焊(SAW)等3种焊接方法对2205双相不锈钢进行焊接试验。测试焊后力学性能和腐蚀性能,以及定性定量分析焊缝区和热影响区的金相组织。结果表明:采用含镍、氮高的焊接材料,合理选择双相不锈钢的焊接方法,焊接参数及接头形式等,通过控制焊接热输入,可获得合格的焊接接头。     

船用不锈钢管道焊接技术研究

本文通过对船用不锈钢管道的使用环境及特殊要求的分析,提出了船用不锈钢管道焊接的技术、方法和焊接的工艺参数,实践证明这些方法可获得高质量的焊接接头,能够满足焊接工程质量。     

磁控电弧粉末膏堆焊工艺研究

首次提出了一种新的堆焊方法－磁控电弧粉末膏堆焊，并阐述了该种堆焊方法的原理、特点及主要工艺参数。文中给出了基材为０Ｃｒ１８Ｎｉ９Ｔｉ不锈钢，焊接材料采用司太立６（Ｓｔｅｌｌｉｔｅ６）钴基金粉末的堆焊板和零件的性能试验结果，包括机械性能测试，硬度测定，金相检验，堆焊层化学成份分析及晶间腐蚀检验等。根据以上工艺试验和理化检验的结果，提出该种堆焊新方法的适用范围及其在核电站设备和港航设备零件堆焊中的应用     

超级双相不锈钢钢管焊接工艺研究

使用手工钨极氩弧焊对超级双相不锈钢钢管做焊接工艺试验,通过对焊接试验数据的分析和总结,得出结论:在选择合适焊接材料的前提下,通过合理设置焊接参数并严格控制焊接热输入及焊缝层间温度等措施,能够保证超级双相不锈钢焊缝铁素体和奥氏体的相平衡,满足对其力学性能和耐腐蚀性能的要求,对今后超级双相不锈钢钢管焊接施工具有指导意义。     

散化船不锈钢液舱的结构特点与施工工艺

介绍乙二醇及奥氏体不锈钢的特性,确定了不锈钢液舱结构形式,分析了不锈钢液舱的结构特点,叙述了奥氏体不锈钢板材的加工、装配及焊接方法的选择。从实船营运看,说明其加工、装配、焊接工艺是可靠的。     

Errata

正In the paper"Influence of Fouling Assemblage on the Corrosion Behaviour of Mild Steel in the Coastal Waters of The Gulf of Mannar,India"in Vol.12,No.4,Page:509,References were lost,and the two authors’biographies were identical.The correct text is shown below.We apologize to the authors and our readers for any inconvenience caused by the errors.     

Journal of Marine Science and Application 2014 Sum. Contents

正~~     

第34届海洋、离岸及极地工程国际会议(英文)

正St.John's,Newfoundland,Canada,May 31-June 5,2015 OMAE2015 is the ideal forum for researchers,engineers,managers,technicians and students from the scientific and industrial communities from around the world to: meet and present advances in technology and its scientific support;     

联合作战计划和执行系统

全球指挥控制系统(GCCS)实施当前美国海军网络中心战信息基础设施的联合计划网络。联合作战计划和执行系统(JOPES)支持GCCS实现联合计划。JOPES有两类计划：时间不限的精密预案计划生成作战计划、方案计划或职能计划；时间敏感的危机行动计划生成作战命令或战役方案。前者在和平时期创建的作战计划是后者的计划基础，加速应付危机的能力。     

Eastbound or westbound ?

In terms of equal sailing distances, where is the inflexion when ships depart from ports in the Asian Continent to New York via Suez and/or Panama？
The answer is China South Port Group （Hong Kong, Shenzhen and Guangzhou）.     

Recent progress on wave induced loading measurements in warships

Recent measurements of wave induced hull strain and flexure in RN warships are presented together with the derivation of the current design criteria for extreme hull girder bending loads. The history of the development of the shipboard instrumentation used is given and recent developments to improve the quality and ease of analysis of the data are described. An unexpectedly high transverse asymmetry in the longitudinal strains measured in destroyers is shown to be the result of a combination of vertical and lateral bending in oblique seas. Finally recent theoretical comparisons between the loading of Deep-Vee hulls and conventional UK rounded bilge hulls are presented which demonstrate the higher loading experienced by this type of hull form.     

桥梁防撞设施物理模型试验

物理模型试验是预报防撞设施所受撞击力及优化设计方案的主要方法之一。结合杭州湾大桥柔性防撞设施及东海大桥独立式防撞体设计方案,阐述了船—防撞体撞击试验的基本原理、方法、试验方案及相关试验结果。提出了柔性防撞系统的优化方案。试验结果表明,该方案经济有效,可供预报类似桥梁防撞设施撞击力时参考。     

印尼某电厂码头水工建筑物设计

印尼某电厂项目码头水工建筑物包括码头、防波堤和护岸等主要组成部分。在该项目水工建筑物的设计过程中,综合考虑当地的自然条件、施工能力和材料来源等因素,不断优化结构选型和结构断面。根据不同使用要求,护岸分别采用直立式和斜坡式2种结构型式,推荐的设计方案节省投资、施工方便,可供同类工程设计参考。     

Impact of regulation on the performances of long-distance transport services: A comparison of the different approaches in Sweden and Norway

Despite the many socio-economic similarities between Sweden and Norway, differences in jurisdiction, organisation, cooperation, and financing of long-distance passenger train and coach services have led to the development of four distinctively different ways of serving the markets. This paper describes how the train and coach markets have developed in the two countries, with emphasis on regulatory and industrial structure and a couple of performance variables.Looking at passenger rail, both countries separated infrastructure from operation over a decade ago. However, while Norwegian rail is characterised by an almost monopoly supplier, rail services in Sweden are partly decentralised to the responsibility of county authorities and are widely subjected to competitive tendering. The rest of the network is about to be opened up for on-the-track competition. Swedish Rail (SJ) has spent the last decades consolidating its core business (passenger rail) and sold out its other businesses. In contrast, the Norwegian state rail (NSB) has expanded its business to become a major bus operator and property owner, with extensions also into the Swedish market.The coach industry was more recently deregulated in both countries. The Swedish coach market is dominated by privately owned companies operating services to and from Stockholm. In Norway, state-owned NSB is a major coach operator on medium distance routes, and is also the largest partner of Nor-Way Bussekspress which totally dominates long-distance coach services. Further, the Norwegian coach market is characterised by cross-ownership and cooperation which has enabled an extensive route network which covers most of Norway.We find distinct differences in achievements in the two modes and in the two countries. Swedish rail services have succeeded in winning market shares and in renewing and developing both infrastructure and service levels to a greater extent than the Norwegian model. On the other hand, the Norwegian coach market seems to be more developed and efficient compared to its Swedish counterpart.The paper concludes with a discussion on the possible links between the different approaches and the performance observed, with the aim to stimulate further and more detailed research on some important issues.     

开放式数据挖掘系统模型

目前国内已经出现了少量的数据挖掘相关产品。国内数据挖掘软件无论从数量还是质量上比较，都与国外软件存在着较大的差距。随着数据仓库技术的普及，数据挖掘应用的需求越来越强烈，如何缩短这种差距，研发数据挖掘软件产品成为国内业界的一个重要问题。通过引用目前国际通用数据挖掘标准技术来构建开放式的数据挖掘系统模型，该系统模型从可扩展性、可重用性、易用性等方面得到了加强。