Lateral Collision Avoidance Robust Control of Electric Vehicles Combining a Lane-Changing Model Based on Vehicle Edge Turning Trajectory and a Vehicle Semi-Uncertainty Dynamic Model

This paper presents a new control scheme for lateral collision avoidance (CA) systems to improve the safety of four-in-wheel-motor-driven electric vehicles (FIWMD-EVs). There are two major contributions in the design of lateral CA systems. The first contribution is a new lane-changing model based on vehicle edge turning trajectory (VETT) to make vehicle adapt to different driving roads and conform to drivers’ characteristic, in addition to ensure vehicle steering safety. The second contribution is vehicle semi-uncertainty dynamic model (SUDM), which is SISO model. The problem of stability performance without the information on sideslip angle is solved by the proposed SUDM. Based on the proposed VETT and SUDM, the lateral CA system can be designed with H_∞ robust controller to restrain the effect of uncertainties resulting from parameter perturbation and lateral wind disturbance. Single and mixed driving cycles simulation experiments are carried out with CarSim to demonstrate the effectiveness in control scheme, simplicity in structure for lateral CA system based on the proposed VETT and SUDM.     

基于线性路径跟踪控制的换道避撞控制策略研究

为实现车辆自主避撞,改善道路交通安全状况,提出一种基于线性路径跟踪控制的换道避撞控制策略。为实时确定制动和换道时机,获取跟车状态下自车和前车车速、加速度、相对距离以及驾驶人制动反应时间计算制动安全距离和换道安全距离,并在此基础上分别引入制动危险系数B和换道危险系数S评估制动与换道风险,使得车辆发生追尾碰撞的危险程度和主动干预阈值更直观。根据车辆期望横向加速度和期望横向位移的变化特性,采用5次多项式法规划符合驾驶人换道避撞特性的避撞路径。为保证换道避撞过程中驾驶人的安全舒适,采用最大横向加速度约束换道避撞轨迹。为实现对换道避撞路径的线性跟踪控制,保证车辆的操纵稳定性和横摆稳定性,基于车辆稳态动力学模型建立前馈控制,结合线性反馈控制消除换道路径的位置和横摆角偏差,修正参考路径实现直车道场景追尾避撞控制。仿真和实车交叉验证试验表明：根据车辆期望横向加速度和期望横向位移建立的符合驾驶人换道避撞特性的五次多项式换道路径与驾驶人实际换道避撞路径基本吻合,结合碰撞时间和车间时距的制动避撞控制策略能够在保证车辆行驶安全舒适性的同时有效避免车辆追尾碰撞,减少交通事故的发生。     

Risk management algorithm for rear-side collision avoidance using a combined steering torque overlay and differential braking

This paper describes a risk management algorithm for rear-side collision avoidance. The proposed risk management algorithm consists of a supervisor and a coordinator. The supervisor is designed to monitor collision risks between the subject vehicle and approaching vehicle in the adjacent lane. An appropriate criterion of intervention, which satisfies high acceptance to drivers through the consideration of a realistic traffic, has been determined based on the analysis of the kinematics of the vehicles in longitudinal and lateral directions. In order to assist the driver actively and increase driver's safety, a coordinator is designed to combine lateral control using a steering torque overlay by motor-driven power steering and differential braking by vehicle stability control. In order to prevent the collision while limiting actuator's control inputs and vehicle dynamics to safe values for the assurance of the driver's comfort, the Lyapunov theory and linear matrix inequalities based optimisation methods have been used. The proposed risk management algorithm has been evaluated via simulation using CarSim and MATLAB/Simulink.     

融合预瞄与势场栅格法的紧急避撞驾驶人模型

紧急避障工况下的驾驶人操作具有响应快且动作幅值较大的特点，传统预瞄驾驶人模型已不能适应紧急避障工况的需求，故考虑实际避撞场景开发相应的驾驶人模型就显得尤为必要。针对此种状况，基于驾驶模拟器，结合紧急避撞工况实际驾驶人操纵数据，提出了一种融合预瞄与势场栅格法的紧急避撞驾驶人模型。首先针对紧急避撞工况下车辆运动特点，建立车辆横、纵向耦合非线性动力学模型，并给出其状态空间方程描述；其次，离线仿真分析紧急避撞系统特征，并结合线性二次型最优控制，建立最优曲率预瞄+跟踪误差反馈驾驶人模型；再者，基于紧急避撞工况下真实驾驶人经验转向行为数据，开发基于势场栅格法的驾驶人模型，为进一步提高驾驶人模型对避障行驶工况的适应性，将基于势场栅格法的驾驶人模型与最优曲率预瞄+跟踪误差反馈驾驶人模型进行融合，并基于Sigmoid函数实现两者输出的权重分配；最后，针对所提出的融合预瞄与势场栅格法的驾驶人模型，开展基于避撞台架的驾驶人在环仿真试验以及实车试验。研究结果表明：在紧急避撞工况下，对比最优曲率预瞄+跟踪误差反馈驾驶人模型，融合预瞄与势场栅格法的驾驶人模型输出的转向动作与实际驾驶人行为较为接近，可在保证避障安全性的前提下，兼顾避障路径跟踪精度与车辆行驶的稳定性。     

识别驾驶人意图的车道偏离防避有界控制

为了防止车辆偏离车道导致交通事故的发生和避免车道偏离防避系统（Lane Departure Avoidance Systems,LDAS）对驾驶人行为不必要的干预,提出基于中心区操纵特性阈值法和基于D-S（Dempster-Shafer）证据理论的车辆偏离车道驾驶人意图识别准则,并运用CarSim/Simulink联合仿真对比2种识别准则的有效性。建立转向盘角速度为输入的车路模型,设计LDAS滑模转向控制器,基于预瞄点的侧向偏移量和横摆角速度设计LDAS的期望横摆角速度观测器,并与基于道路曲率和预瞄点侧向偏移量的期望横摆角速度的LDAS进行性能对比。运用相平面法确定保证LDAS车辆稳定性的前轮转向角最大值,并基于CarSim/LabVIEW RT硬件在环试验平台验证基于BP神经网络训练获得D-S证据理论的初始概率赋值的驾驶人意图决策算法的有效性。结果表明：所提出的识别准则能够及时识别车辆偏离车道时的驾驶人意图,为LDAS控制器介入赢得了宝贵的时间,所设计的期望横摆角速度观测器具有很好的稳定性,所提出的方法能够有效避免车辆偏离车道。     

自动紧急转向导致斜角碰撞的一体化仿真分析

在前方道路突然出现障碍物的危急情况中,车辆采用自动紧急转向来避障,由于情况紧急,车辆在转向过程中仍可能与其他道路参与者发生碰撞事故.当车辆采用自动紧急转向避让道路前方路口突然闯入的车辆时,与对向来车发生斜角碰撞,由此,对该特定场景的转向-碰撞全过程进行一体化仿真,分析乘员在转向阶段因车辆横摆和侧倾运动引起的离位现象以及...     

装载机避障轨迹规划及模型预测轨迹跟踪

轮式装载机在工作区域行驶时，避障过程频繁，以往的避障轨迹规划未考虑整车转向半径约束和车速变化，也较少考虑整车在动力学模型条件下的轨迹跟踪性能。针对上述情况，以自动驾驶轮式装载机为对象，基于最优快速随机扩展树算法（RRT^*），考虑车身膨胀圆个数，生成全局最优避障路径，以整车最小稳定转向半径为约束，利用CC-Steer算法对避障路径进行平滑处理，采用路径-速度分解算法规划满足整车在加速、匀速和减速状态下的避障行驶轨迹。基于整车动力学模型，考虑行驶过程中的横向位置偏差和航向角偏差，并将整车动力传动系统视为1阶惯性环节，构建装载机动力学状态空间方程。以加速度和铰接角为控制输入，以车速、横向位置偏差和航向角偏差为控制输出，建立整车动力学预测模型，以加速度、铰接角和车速为约束条件，将目标函数转换为二次规划问题，建立满足装载机在工作区域避障的模型预测轨迹跟踪控制系统。以规划的非匀速行驶避障轨迹为目标，利用构建的模型预测轨迹跟踪系统，进行自动驾驶轮式装载机的轨迹跟踪仿真。研究结果表明：所提方法能够很好地控制自动驾驶轮式装载机从初始位姿驶向目标位姿，实现整车在工作区域的避障过程，且在避障过程中满足整车的约束要求，保证整车在轨迹跟踪过程中的安全稳定性能。     

车辆防追尾碰撞安全系统

高速公路的事故类型中追尾碰撞占了很大的比例,因而开发车辆防追尾碰撞安全系统是非常必要的。文章分析了影响行车安全的各种因素,建立了安全车距数学模型,利用现代技术,构造了一种车辆防追尾碰撞安全系统。指出此安全系统能减少由于驾驶员分心和疲劳等原因导致的交通事故,最大限度地提高车辆行驶的安全性。     

变路面车辆稳定性控制策略研究

建立了某四轮汽车9自由度车辆模型和轮胎动力模型,并提出了一种基于侧向力利用系数的差动制动、主动转向切换控制策略。模拟了汽车以车速24.5m/s行驶时的一个紧急避让情况,研究了无控制模式、差动制动控制模式、联合控制模式下的车辆横摆角速度、质心侧偏角、质心侧向位移的变化。结果表明,所提出的差动制动联合主动转向技术的控制策略可以满足变路面下车辆稳定性控制要求。     

智能汽车对无信号交叉口行人的避撞控制

针对智能汽车在无信号交叉口对横穿行人的避撞问题,研究了主动转向避撞控制策略.基于多层模型预测控制方法,采用分层控制策略设计局部规划层控制器与全局跟踪层控制器,在此基础上根据交叉口处汽车与行人的轨迹特征计算人车碰撞剩余时间,改进传统人工势场法构造避撞函数,规划出既能规避交叉口内存在碰撞风险的行人又能使偏差最小的局部避撞路...     

Impact phase in frontal vehicle-pedestrian collisions

The paper presents an alternative model developed in order to determine the pedestrian throw distance, taking into account ten distinct parameters. The collision dynamics, after the primary and secondary impact (pedestrian’s head hitting the vehicle windshield-hood area) between the vehicle and the pedestrian, entails the pedestrian ‘carrying’ phase onto the vehicle hood-windshield. Other parameters influencing the pedestrian throw distance, such as road inclination, friction coefficient between the pedestrian and the ground, vehicle and pedestrian mass, pedestrian launch angle are considered for the analysis. A comparison between the results obtained through the formula proposed in this paper and the results obtained by other researchers as well as a comparison with the results extracted from the casuistry analyzed by the authors on both accident reconstruction and laboratory tests is carried out.     

道路分隔栏的安全性能评价研究

通过对道路分隔栏的实际应用情况与车辆碰撞事故特征分析,在借鉴国内外相关规范的基础上,从碰撞车型、碰撞质量、碰撞速度、碰撞角度、碰撞点位置等因素出发,结合分隔栏事故特征和车辆乘员安全指标,研究确定了道路分隔栏的碰撞试验参数与安全性能评价标准,并利用该试验参数和评价标准,通过有限元仿真技术手段对目前常见的道路分隔栏结构进行了安全性能评价。研究表明：在车辆碰撞分隔栏的事故中,事故车辆主要为小型客车,且分隔栏杆侵入乘员舱造成人员伤害的案例较多,而其他类型伤害较少,因此分隔栏在实际使用中应主要考察车辆碰撞时分隔栏及其构件因为刺入乘员舱对乘员伤害的可能;在1.5 t小客车以60 km/h速度正碰条件下,某常用道路分隔栏的横向杆件侵入了车辆乘员舱,其安全性能不满足评价标准要求。研究成果为道路分隔栏安全性能评价标准的制定提供了一定借鉴作用。     

大客车对行人碰撞事故再现研究

利用数值模型仿真试验,研究再现大客车与行人碰撞事故的方法。并将该方法应用到一次真实交通事故中去,初步验证了该模型和方法的可行性。将行人抛距分析方法引入事故再现分析,并结合仿真结果,建立新的适合该类事故的行人抛距与车速关系模型。     

基于蚁狮算法的UKF车辆状态参数估计器

为了准确获取分布式驱动电动汽车状态参数信息,满足车辆稳定性控制系统的需求,提出一种基于蚁狮算法的无迹卡尔曼滤波状态参数估计器。针对无迹卡尔曼滤波（UKF）过程中噪声协方差矩阵的不确定性,采用蚁狮优化算法（ALO）对其进行寻优,并引入奇异值分解（SVD）的方法来维持噪声协方差矩阵的正定性,此外,基于指数加权最小二乘法对车辆侧偏刚度进行辨识并将其作为状态参数估计器输入。基于MATLAB/Simulink和CarSim联合仿真平台,建立分布式驱动电动汽车参数估计模型,分别进行双移线工况和正弦迟滞工况仿真,并基于A&D5435快速原型开发平台进行双移线工况实车试验。仿真与试验结果表明：相比于SVDUKF算法估计结果,双移线仿真工况下,基于ALO-SVDUKF算法估计得到的质心侧偏角和横摆角速度的均方根误差分别降低了55.7%、30.7%,正弦迟滞仿真工况下,均方根误差分别降低了58.1%、85.1%,且在车辆处于极限失稳状态时仍能维持较好的估计效果;双移线试验工况下,横摆角速度的估计值与实际测量值之间的均方根误差仅为0.938 4（°）·s^-1;提出的基于ALO-SVDUKF算法的分布式驱动电动汽车状态参数估计器能够有效提高质心侧偏角和横摆角速度的估计精度,可为车辆稳定性控制提供精确的状态信息。     

Optimal motion control for collision avoidance at Left Turn Across Path/Opposite Direction intersection scenarios using electric propulsion

Collision avoidance at intersections involving a host vehicle turning left across the path of an oncoming vehicle (Left Turn Across Path/Opposite Direction) have been studied in the past, but mostly using simplified interventions and rarely considering the possibility of crossing the intersection ahead of a bullet vehicle. Such a scenario where the driver preference is to avoid a collision by crossing the intersection ahead of a bullet vehicle is considered in this work. The optimal vehicle motion for collision avoidance in this scenario is determined analytically using a particle model within an optimal control framework. The optimal manoeuvres are then verified through numerical optimisations using a two-track vehicle model, where it was seen that the wheel forces followed the analytical global force angle result independently of the other wheels. A Modified Hamiltonian Algorithm controller for collision avoidance that uses the analytical optimal control solution is then implemented and tested in CarMaker simulations using a validated Volvo XC90 vehicle model. Simulation results showed that collision risk can be significantly reduced in this scenario using the proposed controller, and that more benefit can be expected in scenarios that require larger speed changes.     

基于自适应模型预测的智能汽车横向轨迹跟踪控制

当路面附着情况和车辆行驶状态不断变化时,基于恒定侧偏刚度的模型预测控制(MPC)不能考虑轮胎非线性特性的影响,难以保证车辆轨迹跟踪的适应性。为此,提出一种考虑轮胎侧向力计算误差的自适应模型预测控制(AMPC),以提高智能汽车在不确定工况下的轨迹跟踪性能。分析了路面附着系数和垂向载荷对轮胎侧向力的影响,基于平方根容积卡尔曼滤波(SCKF)算法,设计了利用侧向加速度和横摆角速度作为测量变量的前后轮胎侧向力估计器。利用轮胎侧向力线性计算值与估计值的差值计算得到侧偏刚度修正因子,设计了前后轮胎侧偏刚度的自适应修正准则,进而提出了一种基于时变修正刚度的AMPC控制方法。基于CarSim与MATLAB/Simulink联合仿真和硬件在环测试平台,对AMPC控制的有效性和实时性进行了验证。研究结果表明：在不同的路面附着情况和车辆行驶状态下,AMPC控制都能够降低横向位置偏差和航向角偏差,有效提高车辆的轨迹跟踪精度,其控制效果明显优于基于恒定侧偏刚度的标准MPC控制。尤其在低附着工况下,标准MPC控制会因为线性轮胎力的计算误差过大而导致车辆在轨迹跟踪时严重失稳,而AMPC控制通过估计轮胎力修正侧偏刚度依然能够保证车辆稳定有效的跟踪参考轨迹。所提出的AMPC控制在保证控制精度的同时具有良好的实时性,对智能汽车控制系统的设计与优化具有重要参考价值。     

车辆碰撞避免系统的设计与仿真分析

汽车作为人们日常出行所使用的交通工具,在给我们的生活带来方便的同时,各类交通事故的发生也导致很多人受伤甚至死亡。为减少乃至避免交通事故的发生,本次研究主要是在不同路面附着状态辨识的基础上进行智能车辆碰撞避免系统的设计,通过联合滑移率和雷达检测的方法进行道路附着状态识别,并运用CarSim与Simulink进行联合仿真,对车辆位移、纵向和横向速度以及加速度进行耦合控制分析,验证本次设计的合理性。     

The mechanism for the coupler and draft gear and its influence on safety during a train collision

A mechanical model of the coupler and draft gear was established to study the mechanism during an intercity train collision. The model includes four rigid bodies, one spherical joint, two nonlinear torsion spring units and two nonlinear hysteresis units. Simulation and test results show that the axial characteristics of the model are reasonable and the model can reasonably simulate the pitching movement of the coupler. The influence of the coupler and draft gear on the collision behaviour of the train is analysed considering a four-section intercity train. The results show that during the collision process, the amount of compression of the middle coupler is an important factor influencing the pitching deflection angle. The pitching motion posture of the coupler changes with the initial pitching deflection angle, but the initial pitching deflection angle has little effect on its yawing deflection angle. When the pitching angle of the middle coupler is elevated, as the elevation angle increases, the derailment risk of the ‘A’ end bogie of the previous vehicle increases, whereas the risk of derailment of the ‘B’ end bogie of the subsequent vehicle decreases. When the pitching angle of the middle coupler is depressed, the derailment trends for the front and rear bogies exhibit the opposite trend from that of the elevation angle. As the train collision speed increases, the pitching motion of the middle coupler is limited to forcing a yawing motion, causing the yawing deflection angle to increase sharply, which causes the wheel–rail lateral force to increase rapidly. From this, the derailment risk of the bogie increases, which further causes large displacement lateral buckling of the train. An anti-lateral buckling device can limit the yawing deflection angle of the middle coupler, preventing lateral buckling from large displacement and decreasing the risk of derailment.     

智能汽车自动紧急转向避撞的跟踪控制方法对比研究

为了提高智能汽车的主动安全性,提出3种不同的自动紧急转向避撞跟踪控制方法。首先建立汽车避撞简化模型,对制动、转向及两者相结合的3种不同避撞方式进行对比分析。其次,为深入研究汽车避撞过程中的实际响应,建立包含转向、制动及悬架3个子系统耦合特性的底盘18自由度统一动力学模型,并进行相关试验验证。随后构建智能汽车自动紧急转向避撞控制框架,对五次多项式参考路径和七次多项式参考路径的横摆角速度和横摆角加速度进行对比分析。接着以线性2自由度转向动力学模型为参考对象,对最优控制四轮转向、最优控制前轮转向、前馈与反馈控制相结合的前轮转向3种不同的跟踪控制系统分别进行设计。最后,以汽车底盘18自由度统一动力学模型为研究对象,对上述3种避撞控制系统进行仿真试验对比分析。研究结果表明：与制动避撞相比而言,转向避撞所需的纵向距离有较大降低,随着车速的增加和路面附着系数的越低,效果越明显;七次多项式参考路径比五次多项式参考路径的避撞过渡过程更为平缓,当实际车速与控制器所用车速不一致时,前者避撞性能表现更优;最优四轮转向控制系统在高、低2种不同附着路面都具有较好的避撞效果,最优前轮转向控制系统次之,而前馈与反馈相结合的前轮转向控制系统在低附着路面上则表现出严重的失稳。     

Emergency steering control of autonomous vehicle for collision avoidance and stabilisation

ABSTRACT

Collision avoidance and stabilisation are two of the most crucial concerns when an autonomous vehicle finds itself in emergency situations, which usually occur in a short time horizon and require large actuator inputs, together with highly nonlinear tyre cornering response. In order to avoid collision while stabilising autonomous vehicle under dynamic driving situations at handling limits, this paper proposes a novel emergency steering control strategy based on hierarchical control architecture consisting of decision-making layer and motion control layer. In decision-making layer, a dynamic threat assessment model continuously evaluates the risk associated with collision and destabilisation, and a path planner based on kinematics and dynamics of vehicle system determines a collision-free path when it suddenly encounters emergency scenarios. In motion control layer, a lateral motion controller considering nonlinearity of tyre cornering response and unknown external disturbance is designed using tyre lateral force estimation-based backstepping sliding-mode control to track a collision-free path, and to ensure the robustness and stability of the closed-loop system. Both simulation and experiment results show that the proposed control scheme can effectively perform an emergency collision avoidance manoeuvre while maintaining the stability of autonomous vehicle in different running conditions.