Analysis of motion on agile shell-feeding system

Since cannon drum of agile shell-feeding system rotates frequently and intermittently, its motion must be steady. Outline of driving cam determines the motion of cannon drum, so it is necessary to select the proper outline of cam. Through analysis of parabolic outline and cycloid outline of the cams, the outline that combines the two curves is obtained. According to the demand of production, the value of the outline is revised, and then the method of fitting curve is used to get the expression of the angle of cam and the displacement of the driven part. Through analyzing the motion of the cannon drum, it is suggested that the angle of the cam is proportion to the displacement of the driven part. The cam with the specially derived outline can move steadily.     

水底地形变化对摇板造波的影响

In the present paper,the effect of a small bottom undulation of the sea bed in the form of periodic bed form on the surface waves generated due to a rolling oscillation of a vertical barrier either partially immersed or completely submerged in water of non uniform finite depth is investigated.A simplified perturbation technique involving a non dimensional parameter characterizing the smallness of the bottom deformation is applied to reduce the given boundary value problem to two independent boundary value problems upto first order.The first boundary value problem corresponds to the problem of water wave generation due to rolling oscillation of a vertical barrier either partially immersed or completely submerged in water of uniform finite depth.This is a well known problem whose solution is available in the literature.From the second boundary value problem,the first order correction to the wave amplitude at infinity is evaluated in terms of the shape function characterizing the bottom undulation,by employing Green’s integral theorem.For a patch of sinusoidal ripples at the sea bottom,the first order correction to the wave amplitude at infinity for both the configuration of the barrier is then evaluated numerically and illustrated graphically for various values of the wave number.It is observed that resonant interaction of the wave generated,with the sinusoidal bottom undulation occurs when the ratio of twice the wavelength of the sinusoidal ripple to the wave length of waves generated,approaches unity.Also it is found that the resonance increases as the length of the barrier increases.     

优化船用柴油机的性能以减少氧化硫SO_x排放物的形成（英文）

Optimization procedures are required to minimize the amount of fuel consumption and exhaust emissions from marine engines.This study discusses the procedures to optimize the performance of any marine engine implemented in a 0D/1D numerical model in order to achieve lower values of exhaust emissions. From that point, an extension of previous simulation researches is presented to calculate the amount of SO_x emissions from two marine diesel engines along their load diagrams based on the percentage of sulfur in the marine fuel used. The variations of SO_x emissions are computed in g/k W·h and in parts per million(ppm) as functions of the optimized parameters: brake specific fuel consumption and the amount of air-fuel ratio respectively.Then, a surrogate model-based response surface methodology is used to generate polynomial equations to estimate the amount of SO_x emissions as functions of engine speed and load. These developed non-dimensional equations can be further used directly to assess the value of SO_x emissions for different percentages of sulfur of the selected or similar engines to be used in different marine applications.     

交通部 铁路部关于实施《国际集装箱多式联运管理规则》有关问题的通知

In order to standardize the market management of china‘s intemational container multimodal transport and promote china‘s foreign trade,the ministry of commuications and the ministry of railways of the people‘s republic of china(hereinfter referred to as the two ministries)jointly promulgated on march1997 the “regulations for the managemetnt of intemational container multimodal transport ”(hereinafter referred to as the regulations )and began to enforce the regulations on oct.1.1997.     

Numerical calculation of coupled damage effects on ship subjected to internal blast loading of warhead北大核心CSCD

［Objective］This paper studies the coupled damage effects of a ship's structure due to the internal blast loading of a warhead. ［Methods］Blast tests with cased charge data are conducted to verify the effectiveness of the coupled SPH-FEM approach, and numerical calculations are then performed on real ship compartment scale model tests to analyze the coupled fragmentation and shockwave damage effects of an explosion in a confined cabin.［Results］The results show that the fragments caused by the detonation of the warhead will first cause local damage to the cabin structure. The shockwave will exacerbate the local damage, and blasted openings will further increase the space for the propagation and diffusion of the shockwave inside the chamber, which will in turn cause damage to the adjacent structures. The simple equivalence of the warhead to a bare charge does not give a true picture of the effect of the warhead on the ship's structure, and fragmentation plays a significant role in the detonation of the warhead.［Conclusions］The results of this study show that employing the coupled SPH-FEM numerical method to calculate the coupling damage effects on a ship's structure can accurately reproduce the warhead damage pattern in tests, thereby providing support for the improved assessment of the damage of naval structures under warhead detonation. © 2022 Chinese Journal of Ship Research. All rights reserved.     

Individual and Private Sector Contributes 18.3 Percent of the GDP

China's individual and private economic sector has developed in the tide of reform and opening-up. According to the estimation of the National Bureau of Statistics, in 2000 the individual and private sector created 1,497.5 billion yuan in the GDP, accounting for 18.3 percent of the national total. The sector has developed from a supplement to the national economy at the beginning to a major component of the socialist market economy. The employees of individual and private businesses are "buildings of the cause of     

应用RANS(雷诺平均的纳维尔一斯托克斯方程)和动量理论进行螺旋桨诱导速度的计算研究(英文)

In order to provide instructions for the calculation of the propeller induced velocity in the study of the hull-propeller interaction using the body force approach,three methods were used to calculate the propeller induced velocity:1) Reynolds-Averaged Navier-Stokes(RANS) simulation of the self-propulsion test,2) RANS simulation of the propeller open water test,and 3) momentum theory of the propeller.The results from the first two methods were validated against experimental data to assess the accuracy of the computed flow field.The thrust identity method was adopted to obtain the advance velocity,which was then used to derive the propeller induced velocity from the total velocity field.The results computed by the first two approaches were close,while those from the momentum theory were significantly overestimated.The presented results could prove to be useful for further calculations of self-propulsion using the body force approach.     

ABSTRACTS

For the shipping industry and related industries, this round of comprehensive reform means： first, in terms of China＇s economic internal, it will appear geographical major restructuring. China＇s economy urbanization in fact is accelerating. This round of urbanization is largely driven by folk and people choose their own, not the government plan. So there may be some unexpected area between the back of the plates of the size of the economy. The author urges people to study more geographical layout and be sure to walk one step first than actually occurs. Secondly, the acceleration of this round will lead to the change of industry adjustment. People often talk of industrial structure adjustment, a lot of excess capacity is to quit. This round of reform will be accelerated, because the emphasis of this round of reform is to let the market play a role and greatly reduce the government＇s approval. Now the state council greatly reduces the government＇s approval, especially of private investment. If private investors to invest, they will     

CFD simulation of propeller and rudder performance when using additional thrust fins

To analyse a possible way to improve the propulsion performance of ships,the unstructured grid and the Reynolds Average Navier-Stokes equations were used to calculate the performance of a propeller and rudder fitted with additional thrust fins in the viscous flow field.The computational fluid dynamics software FLUENT was used to simulate the thrust and torque coefficient as a function of the advance coefficient of propeller and the thrust efficiency of additional thrust fins. The pressure and velocity flow behind the propeller was calculated. The geometrical nodes of the propeller were constituted by FORTRAN program and the NUMBS method was used to create a configuration of the propeller,which was then used by GAMMBIT to generate the calculation model. The thrust efficiency of fins was calculated as a function of the number of additional fins and the attack angles. The results of the calculations agree fairly well with experimental data,which shows that the viscous flow solution we present is useful in simulating the performance of propellers and rudders with additional fins.     

Planning method for AUV region detection under ocean current

In this paper we present two strategies of AUV (Autonomous Underwater Vehicle) region detection and an approach to decompose the detection region according to the direction of the ocean current. In the task of local detection and identification, the algorithm against the ocean current was proposed. In the tasks of closing obstacle, going back or moving, the fuzzy logic theory was used to solve the effect of ocean current. In one of our strategies the concept of weighted journey based on the angle between heading and ocean current is suggested and the TSP‘s exact optimal result is utilized to solve the global path planning. Simulations demonstrate the feasibility of this approach.     

可渗透海床上具有小底部变形的斜弯曲重力波的相互作用:格林函数法（英文）

The interaction of oblique incident water waves with a small bottom deformation on a porous ocean-bed is examined analytically here within the framework of linear water wave theory. The upper surface of the ocean is assumed to be covered by an infinitely extended thin uniform elastic plate, while the lower surface is bounded by a porous bottom surface having a small deformation. By employing a simplified perturbation analysis, involving a small parameter δ(1), which measures the smallness of the deformation, the governing Boundary Value Problem(BVP) is reduced to a simpler BVP for the first-order correction of the potential function. This BVP is solved using a method based on Green's integral theorem with the introduction of suitable Green's function to obtain the first-order potential, and this potential function is then utilized to calculate the first-order reflection and transmission coefficients in terms of integrals involving the shape function c(x) representing the bottom deformation. Consideration of a patch of sinusoidal ripples shows that when the quotient of twice the component of the incident field wave number propagating just below the elastic plate and the ripple wave number approaches one, the theory predicts a resonant interaction between the bed and the surface below the elastic plate. Again, for small angles of incidence, the reflected wave energy is more as compared to the other angles of incidence. It is also observed that the reflected wave energy is somewhat sensitive to the changes in the flexural rigidity of the elastic plate, the porosity of the bed and the ripple wave numbers. The main advantage of the present study is that the results for the values of reflection and transmission coefficients obtained are found to satisfy the energy-balance relation almost accurately.     

Shock resistance of supercharged boilers through integration with ship structure

The non-linear finite element software ABAQUS was used to simulate the dynamic response of a marine supercharged boiler when subjected to impact loading. Shock resistance was analyzed by the time-domain simulation method. After exhaustive simulations,the effect of air pressure induced by different working conditions on the shock response of a supercharged boiler was reviewed,leading to conclusions about the variability of structural response with different loading parameters. In order to simulate the real impulsive environments of supercharged boilers,the integration of equipment and ship structure was then primarily used to analyze shock response. These distinctly different equipment shock test methods,run under equivalent work conditions,were compared and the causes of discrepancy were analyzed. The main purpose of this paper is to present references for the anti-shock design of marine supercharged boilers.     

空泡闭合区压力特性试验研究(英文)

The most complicated component in cavitating flow and pressure distribution is the flow in the cavity closure line. The cavitating flow and pressure distribution provide critical aspects of flow field details in the region. The integral of pressure results of the hydrodynamic forces, indicate domination in the design of a supercavitating vehicle. An experiment was performed in a water tunnel to investigate the pressure characteristics of the cavity closure region. Ventilation methods were employed to generate artificial cavity, and the ventilation rate was adjusted accordingly to obtain the desired cavity length. An array of pressure transducers was laid down the cavity closure line to capture pressure distribution in this region. The experimental results show that there is a pressure peak in the cavity closure region, and the rise rate of pressure in space tends to be higher in the upwind side when the flow is non-axisymmetric. The transient pressure variations during the cavity formation procedure were also present. The method of measurement in this paper can be referenced by engineers. The result helps to study the flow pattern of cavity closure region, and it can also be used to analyze the formation of supercavitating vehicle hydrodynamics.     

Modeling design of military equipment operational concepts by MBSE北大核心CSCD

［Objectives］In order to give full play to role of "operational concepts" in the engineering process of military equipment development, it is necessary to understand and form standardized operational concept documents (OCD), and study the modeling design of OCD in order to implement the transformation of the system engineering process from document-centric to model-centric. ［Methods］This study analyzes the US military's definition of operational concepts and introduces its hierarchical operational concepts, especially the bottom level ConOps or OpsCon, usually as a part of equipment acquisition and requirement engineering. Lessons are then drawn from the relevant theories and standards such as IEEE 29148:2018 and ANSI/AIAA G-043B-2018 of the operational concepts document outline in order to design the specifications of the OCD. Finally, key technologies are studied, including SysML-based OpsCon modeling, UML Profile-based OpsCon framework design and MSDL/C-BML-based operational scenario development.［Result］The results indicate the effectiveness of implementing the modeling design of OCDs. ［Conclusions］In the process of equipment requirement engineering, the results of this study can help to improve the efficiency of equipment requirement demonstration through an ambiguous operational concept model and an engineering environment for all stakeholders of the system. © 2022 Journal of Clinical Hepatology. All rights reserved.     

ABSTRACTS

The China Shipping Prosperity Index （CSPI） for the third quarter has climbed 15 points from the second quarter to 101.7 points, back to positive territory, which is above 100 points, according to the latest report form Shanghai International Shipping Institute （SISI）. This is the first time since the third quarter of 2011 that the CSPI returned to above the critical level. In the past two years, withering trade and overcapacity pushed the Chinese shipping industry down to a historical bottom. In the third quarter of 2012, when the CSPI fell to only 78 points, about 60 per cent of carriers in China suffered severe loss. Since the second quarter of this year, the Chinese government＇s policies to secure growth have taken effect and spurred an obvious growth in the country＇s investments and exports, which brought hope to the shipping market. The Baltic Dry Index has risen to over 2,100 points by far, a sharp increase of 180 per cent from the beginning of this year. The index surged nearly 80 per cent in September. The container shipping industry also shares the general improvement of the market. Since July, there have been several attempts to introduce rate increase. The spot rate from Shanghai to Europe was once more than doubled. Part of the carriers might be able to reverse their loss in the third quarter. However, the recovery might not be sustainable, as China is very likely to be able to meet the GDP target of 7.5 per cent growth and there will not be further policies to boost domestic economy. Meanwhile, the rebound of rates has stimulated deployment of new tonnage. Statistics show, capacity on Asia-Europe lane grew about three per cent in September but demand is not stable. The supply-demand imbalance caused a decrease of over US$100 per TEU in the container shipping rates in the last week of September.SISl＇s report estimated that the CSPI in the fourth quarter will be 99.56 points, falling again below the critical level. In face of such challenges,     

THE SPIRIT OF THE LIULINHAICONTINUES AS AN EVERLASTING BRIDGE ACROSS THE PACIFIC OCEAN

Twenty years ago, a ship arrived in Seattle from China bearing the hopes of two nations to rebuild an historic trade relationship. On the chilly morning of April 18, 1979, the COSCO vessel Liulinhai entered Elliott Bay to receive a cargo of grain. the first vessel bearing the flag of the People's Republic of China to call at Seattle in 30 years.     

深水起重铺管船横摇运动性能分析(英文)

For a large floating vessel in waves,radiation damping is not an accurate prediction of the degree of roll unlike other degrees of freedom motion.Therefore,to get the knowledge of roll motion performance of deepwater pipelay crane vessels and to keep the vessel working safety,the paper presents the relationship between a series of dimensionless roll damping coefficients and the roll response amplitude operator(RAO).By using two kinds of empirical data,the roll damping is estimated in the calculation flow.After getting the roll damping coefficient from the model test,a prediction of roll motion in regular waves is evaluated.According to the wave condition in the working region,short term statistics of roll motion are presented under different wave parameters.Moreover,the relationship between the maximal roll response level to peak spectral wave period and the roll damping coefficient is investigated.Results may provide some reference to design and improve this kind of vessel.     

Numerical simulation on truncated oval-nosed projectile penetrating into stiffened plate北大核心CSCD

[Objectives]In this paper, the numerical simulation method is used to study the anti-penetration performance and energy absorption mode of a stiffened plate, as well as the influence of different stiffened bars on the flight attitude of the projectile body.[Methods] Finite element software LS-DYNA is used to simulate the process of a truncated oval-nosed projectile penetrating a stiffened plate, and the results of the numerical simulation are compared with an experiment to verify the reliability of the numerical simulation method. The momentum method and mass equivalence method are used to predict the residual velocity of the projectile, and the applicability of different theoretical methods within different velocity ranges is compared. The deformation energy of different regions of the stiffened plate is then extracted to analyze the influence of the initial velocity of the projectile body on the energy absorption mode of the target plate. Finally, the structure of the stiffeners is changed and the influence of the relative position of the stiffeners on the penetration attitude of the projectile body is analyzed.[Results]The results show that the mass equivalence method is more accurate than the momentum method in predicting the residual velocity of the stiffened plate when the initial velocity of the projectile body is in the range of 300–900 m/s. The ratio of the deformation energy of the stiffened plate to the energy loss of the projectile body decreases with the increase of the initial velocity of the projectile body. The effect of a T-stiffened plate on trajectory is greater than that of a rectangular-stiffened plate.[Conclusions]The related calculation method and research results have certain reference value for research and engineering application surrounding the anti-penetration of stiffened plates. © 2023 Chinese Journal of Ship Research. All rights reserved.     

基于实际预压载作业的自升式平台环境载荷图谱绘制新思路（英文）

The environmental load chart is an important technical support required for the jack-up drilling platform to facilitate its adaptation to different operating waters and ensure the safety of operation. This chart is a crucial part of the platform operation manual. The chart data are closely related to external factors such as water depth, wind, wave, and current conditions of the working water, as well as to the structural characteristics of the platform itself and the number of variable loads. T...     

Safety assessment for a side-by-side offloading mooring system

In order to improve the safety properties of an offloading system with side-by-side (SBS) mooring in which the FPSO is moored by a yoke system in the field of BZ25-1, it is necessary to analyze those properties. According to the experience of similar projects, tow strategies of different offloading arrangements were discussed by using the 3-D radiation/diffraction theory and quasi-static time domain method to assess their respective safety properties. Through the safety assessment analysis of different arrangement comparisons, various ways to improve the safety properties of offloading systems with side-by-side mooring were verified by analyzing the tension in the mooring lines and the fender deflection. Through comparison it can be concluded that by enlarging the key factors properly, including the size of the fenders and the hawsers as well as the number of hawsers, a better safety performance can be achieved.