纵向弯矩下材料随机特性对复合材料船体可靠性的影响

The effects of stochastic characteristics of materials on the reliability of ship hulls made of composite materials under longitudinal moment were extensively studied using reliability and sensitivity calculations of a composite ship hull which was sagging.The reliability indices and failure probabilities of the ship in three kinds of failure modes (buckling,material failure,and ultimate collapse) were calculated by the surface response method and JC method.The importance factors of random variables in stochastic models,such as the model errors in predicting the ultimate longitudinal strength of ship and the longitudinal bending moment that the ship withstands,as well as the stochastic characteristics of materials in the models used,were calculated.Then,the effects of these random variables,including the stochastic characteristics of materials on the reliability index and the failure probability of ships which were sagging,were discussed with their importance factors.The results show that the effects of stochastic characteristics of materials on the reliability of ship hulls made of composite materials should be considered during the reliability assessment of composite ships.Finally,some conclusions and recommendations were given for high-speed ship design and safety assessment.     

Testing and analysis of a 6-m steel truss/composite skin hybrid ship hull model

A hybrid ship hull made of a steel truss and composite sandwich skins was investigated experimentally and numerically. A 6-m model was tested under hogging loads, after having previous been subjected to sagging loads. All loads were introduced as shear through brackets welded to bulkheads. The model was loaded to the design load, at which point there was plastic yielding of the steel truss. However, there was no indication of failure in any of the composite sandwich panels, nor in the adhesive bonds between the panels and the steel truss. The steel truss started to yield at lower strains than expected, a fact which was elucidated by manufacturing and testing subcomponents of the steel truss. Nonlinear elastic-plastic finite element analyses were performed on the complete hull. Results from the numerical analyses were compared with data from both sagging and hogging tests and good correlation was found.     

复合材料船体纵向极限强度可靠性分析

把船体甲板或船底板结构视为是一系列加筋板单元的组合，然后利用复合材料梁柱理论计算船体加筋板单元构件的极限承载能力，最后用Smith法计算复合材料船体的极限承载能力。由于复合材料船体纵向极限强度的极限状态方程不能简单地用船体各参数显式表达，故将近年发展起来的响应面法与JC法相结合，对复合材料船体纵向极限强度进行了可靠性分析。并讨论了影响船体纵向极限强度可靠性各变量的敏感性。     

CFRP修复的FPSO点蚀船体梁极限强度分析

采用非线性有限元法对中拱和中垂工况条件下碳纤维增强聚合物(Carbon Fiber Reinforced Polymer, CFRP)修复的浮式生产储卸油装置(Floating Production Storage and Offloading, FPSO)点蚀船体梁极限强度进行仿真分析。对比FPSO的完整船体梁、点蚀船体梁和CFRP修复的点蚀船体梁的中拱极限弯矩和中垂极限弯矩，分析CFRP对FPSO点蚀船体梁的修复效果，并分析胶层失效规律。结果表明，CFRP可为船舶的高效修复提供一种新的方式。     

22 000m3液化气船整船和舱段三维有限元强度分析

对２２０００ｍ＾３液化气船进行了整船和舱段三有限元强度计算分析,建立了整船和船体主舱段的三维有限元结构模型。并通过节点力的自动加载技术和惯性平衡处理技术建立有限元模型的节点载荷,在中拱和中垂弯矩作用下,计算出本在压载和满载工况下的船体应力和变形,是后通过对本舱舱段的边界处理技术,计算出受船体总强度的船体舱段局部强度,对船体强度出判断,为改进船体结构设计提供依据。     

水下爆炸气泡作用下船体总纵强度估算方法

水下爆炸中的气泡脉动载荷会造成舰船的鞭状运动,对其总纵强度产生很大威胁,是战争中造成船体总体毁伤与丧失生命力的主要原因之一。基于势流理论,推导并建立船体梁气泡弯矩的理论与计算方法,同时综合考虑气泡弯矩、船体静水弯矩、波浪弯矩及砰击弯矩等其他影响因素,建立一套完整的气泡作用下船体梁总纵强度估算方法。通过算例,校核典型工况下多种弯矩同时作用时船体梁的总纵强度。计算结果表明,气泡脉动载荷产生的总纵弯矩具有周期性鞭振特性,且数值大于其他弯矩。在评估舰船总纵强度与生命力时,应充分考虑气泡脉动载荷的影响。     

破损船体剩余强度衡准研究

本文研究了船体破损非对称淹水和刚度损失引起的船体外载荷变化,并利用破损船体非对称弯曲极限强度计算方法详细分析碰撞、搁浅和爆炸破损对船体极限强度的影响.然后基于破损船体极值载荷和极限强度,给出破损船体剩余强度衡准,并对破损船体临界海况进行预报.     

Finite-volume simulation of flows about a ship in maneuvering motion

A finite-volume method of computing the viscous flow field about a ship in maneuvering motion was developed. The time-dependent Navier-Stokes equation discretized in the generalized boundary-fitted curvilinear coordinate system is solved numerically. A third-order upwind differencing scheme, a marker and cell (MAC)-type explicit time marching solution algorithm and a simplified subgrid scale (SGS) turbulence model are adopted. The simulation method is formulated, including the movement of a computational grid fitted to the body boundary that allows computation of the flow field around a body under unsteady motion. To estimate the maneuvering ability of a ship, the accurate prediction of the hydrodynamic forces and moments of the hull is important. Therefore, experimental methods of finding the hydrodynamic forces of a ship in maneuvering motion, such as the oblique towing test, the circular motion test (CMT) and planar motion mechanism (PMM) test, were established. Numerical simulation methods for those captive model experiments were developed introducing computational fluid dynamics (CFD). First, numerical methods for steady oblique tow and steady turn simulation were developed and then extended to unsteady forced motion. Simulations were conducted about several realistic hulls, and the results were verified by comparisons with measured results obtained in model experiments. Hydrodynamic forces and the moment, the longitudinal distribution of the hydrodynamic lateral force, and the pressure distribution on the hull surface showed good agreement.     

破损船体极限强度非线性有限元分析

本文基于通用有限元系统,结合船体破损机理和初始缺陷处理方法,建立船体极限强度非线性有限元分析的完整框架.利用对水面舰船和双壳油船极限强度模型试验的比较验证,合理解决非线性有限元分析的关键技术,并对完整和破损船体极限强度进行非线性有限元法分析.然后,在模型试验和非线性有限元分析的基础上提出面向设计的适合破损船体和双向弯曲状态的船体极限强度分析的改进解析方法.     

船体在疲劳和腐蚀损伤下的可靠性

在疲劳和腐蚀作用下，船体梁舯剖面模数折减，导致极限承载能力下降，在此基础上进行可靠性分析。文中腐蚀率是一个有常数平均值的随机变量，疲劳裂纹根据Paris公式计算，当静水弯矩和波浪弯矩的组合值超过船体梁极限承载能力时，发生船体梁失效。以一艘散货船为例，计算其可靠性随时间的变化。计算结果可为船东和船级社评估船舶营运期间疲劳和腐蚀对船舶可靠性的影响提供参考。     

S-175集装箱船舶波浪载荷的船模试验与线性切片理论计算的比较

本文就日本S-175集装箱船舶的波浪载荷进行了船模试验与线性切片理论计算的比较,发现线性切片理论对于波浪载荷沿船长的纵向分布以及中拱与中垂的不同分量都与试验值存在着相当大的差异,仅纵向运动较为满意;揭示了对于在高浪级下快速舰船的波浪载荷,特别是砰击载荷应致力于开展非线性理论和试验研究。     

一种具有倾斜侧体的三体船阻力试验研究

作为一种高性能船型,三体船受到了研究人员的广泛关注。由于侧体位置对三体船剩余阻力会产生影响,为了研究倾斜侧体对三体船阻力性能的影响,设计了一种新型的倾斜侧体三体船,并在拖曳水池中开展了相应的船模阻力试验。试验中,针对这种新型的斜侧体三体船,采用船模拖曳的试验方法测量了不同装载情况侧体多个倾斜角度下的三体船裸船体阻力。而后,依据傅汝德假定对试验数据进行了计算,分析并讨论侧体倾斜角度对三体船剩余阻力的影响。试验结果表明,选择侧体合适的倾斜角度有利于降低三体船的航行阻力,为此类船型的设计尤其是快速性方面的研究和设计提供参考。     

船艉线型对船舶阻力性能的影响

以船体阻力性能为优化对象,基于改造母型船法,分析船艉线型的改变对船舶阻力性能的影响。根据船舶主要参数设计要求,参考同类船型,利用Tribon-Lines模块对船舶艉部型线进行改造,生成两种方案船型,并通过CFX软件对母船型以及方案船型进行粘性绕流场的数值模拟,讨论不同航速下艉部线型对船体总阻力的影响。研究结果表明,在以船体阻力性能为优化对象时,选优后的方形艉在相同的航速下阻力低、消耗的功率小、形状效应小、粘压阻力和摩擦阻力也相对较小。     

Test of extensively damaged hybrid ship hull

A hybrid ship hull model made with a steel truss and composite sandwich panels was tested and analyzed with the goal of gaining insight into how well this structural concept holds up after major damage. One of the ideas of the concept was to mount the sandwich panels to the steel truss such that they can be blown out in a controlled fashion to ventilate a large internal blast. The hull should be designed to have sufficient strength for the ship to reach a port safely even after such extensive damage. A 6-m model of such a hybrid ship hull, consisting of a stainless steel truss and 60 composite sandwich panels, was manufactured and mechanically tested. A number of panels were then removed one by one and the hull was retested to the design load after each panel had been removed. The removed panels simulated major damage. After nine panels had been removed, from all the different areas of the hull, it could still carry the design load, although with considerable nonreversible deformations of the hull girder. The hull was eventually loaded to final failure, which occurred at 25% above the design load.     

基于参数化CAD模型的船型阻力/耐波性一体化设计

在舰船概念设计阶段,往往需要快速生成阻力和耐波性能兼优的船型。采用基于母型船的船型融合生成方法,实现了参数化船型自动生成。在此基础上,采用iSight优化平台,将参数化船型生成技术与阻力、耐波性计算模型集成,运用多学科设计优化技术实现了船型阻力/耐波性性能一体化设计。优化方法采用多目标遗传算法以获取Pareto前沿。以一艘46 000 DWT油船的型线优化为算例对这个过程进行了具体说明,试验结果表明总阻力降低了3%,验证了这种方法的可行性。     

船舶复合材料上层建筑概念设计及力学行为研究

针对船舶轻量化的发展需求,以轻质复合材料夹芯结构作为上层建筑的基础板材,以船用复合材料T形连接和y形连接作为设计节点,通过局部设计节点与基础板架的有机组合完成集成式船舶复合材料上层建筑的概念设计.分析船舶上层建筑的多种受载形式,研究其在波浪环境中联合载荷作用下的力学行为表征和宏观响应特性,预报复合材料上层建筑与主船体之间的相互作用及其对船舶总纵弯曲的贡献效率,为船舶复合材料上层建筑的优化设计、可靠性和安全性分析提供有益参考.     

基于船体直接强度评估的可靠性分析（英文）

A method of reliability analysis based on a direct strength calculation employing the von Mises stress failure criterion is presented here. The short term strain distributions of ship hull structural components are identified through the statistical analysis of the wave-induced strain history and the long term distributions by the weighted summation of the short term strain distributions. The wave-induced long term strain distribution is combined with the still water strain. The extreme strain distribution of the response strain is obtained by statistical analysis of the combined strains. The limit state function of the reliability analysis is based on the von Mises stress failure criterion, including the related uncertainties due to the quality of the material and model uncertainty. The reliability index is calculated using FORM and sensitivity analysis of each variable that has effects on the reliability is also discussed.     

水下爆炸作用下对称结构船体梁整体损伤特性研究

基于相似原则设计了全封闭对称结构船体梁模型,将TNT炸药置于模型中部正下方爆炸,通过改变爆距和药量来研究梁模型在水下近距非接触爆炸作用下的整体损伤特性,比较爆炸气泡运动对梁结构造成的中垂和中拱弯曲损伤作用,探索近距条件下炸药爆炸造成梁发生整体损伤变形时的高效攻击方式。研究发现:在近距非接触爆炸作用下,当爆炸气泡脉动频率与梁一阶湿频率相近时,水下爆炸气泡对梁结构造成的损伤作用以中垂弯曲为主,且爆径比越小,中垂损伤作用越明显;若爆径比不变,随着药量的增大,梁的整体损伤模式会由中垂弯曲向中拱弯曲转变;一定爆距范围内,炸药在远距离多次爆炸比近距离一次爆炸所造成的梁结构中垂损伤变形要大。     

对称、非对称不同船体构型下高速非交错五体船模阻力特性（英文）

Pentamaran, a vessel with five hulls, can be an alternative for high-speed vessels due to its advantages, for instance, its excellent stability and seakeeping performance and broader deck space than an equivalent monohull with the same displacement. The destructive interference between the system of waves produced by the vessel's hulls might benefit the reduction of power consumption. This study investigated a Wigley hull form pentamaran model with five asymmetric and symmetric hull configurations and three variations of hull separation. The ship model was towed in conditions of fixed towing and calm water with Froude numbers(Fr) ranging from 0.55 to 1.00. A resistance analysis had been carried out to ensure proper comparison between the asymmetric and symmetric hull configurations. Results showed that total resistance coefficient of the asymmetries created different properties from the symmetries, that is, symmetries produced steadier trends than asymmetries. The hull separation variation caused a slight alteration in the total resistant coefficient(in magnitude) under the same configuration. Although not a single configuration outperformed the others in the entire range of Fr, three configurations were noteworthy as optimum models based on their Fr range. Moreover, a configuration of asymmetric hull with S/L = 0.22 could generate a constant destructive interference throughout the investigated Fr range.     

The compressive behavior of advanced double hull structure—A review of current research at David Taylor

It has long been recognized that the compressive behavior of primary ship structural components plays a vital role in the design of surface ship hulls. This is equally as true for the new advanced double hull concept as it is for the more conventional surface ship configurations. What is different, however, is the nature of the structural mechanics phenomena which must be addressed due to the double hull's more radical departure from conventional design and construction practices. With increasing interest and attention being shown in this new concept, the David Taylor Model Basin has over the past few years initiated a number of research efforts which have and are continuing to address various aspects of the behavior of double hulls and their components to primary compressive loadings. These studies have as their ultimate goal the development of practical, user oriented design methods for double hull structure and as such currently focus on more approximate, rather than mathematically rigorous, approaches to the various structural phenomena being considered. This paper is in essence a progress report on a selected number of these efforts and describes the results achieved to date as well as the ongoing efforts and those planned for the future. This report focuses primarily on three recent studies: (1) a preliminary look at the relative significance of local versus general instability failure of double hull structure; (2) small scale experimental analysis of double hull sections using rigid vinyl modelling; and (3) the application of beam-on-elastic-foundation analysis methods for high aspect stiffened plates as it relates to double hull structure. In addition to these major topics, the report also includes a brief discussion of other ongoing and planned efforts relevant to the advanced double hull.