Eco-driving advisory strategies for a platoon of mixed gasoline and electric vehicles in a connected vehicle system

As electric vehicles (EVs) have gained an increasing market penetration rate, the traffic on urban roads will tend to be a mix of traditional gasoline vehicles (GVs) and EVs. These two types of vehicles have different energy consumption characteristics, especially the high energy efficiency and energy recuperation system of EVs. When GVs and EVs form a platoon that is recognized as an energy-friendly traffic pattern, it is critical to holistically consider the energy consumption characteristics of all vehicles to maximize the energy efficiency benefit of platooning. To tackle this issue, this paper develops an optimal control model as a foundation to provide eco-driving suggestions to the mixed-traffic platoon. The proposed model leverages the promising connected vehicle technology assuming that the speed advisory system can obtain the information on the characteristics of all platoon vehicles. To enhance the model applicability, the study proposes two eco-driving advisory strategies based on the developed optimal control model. One strategy provides the lead vehicle an acceleration profile, while the other provides a set of targeted cruising speeds. The acceleration-based eco-driving advisory strategy is suitable for platoons with an automated leader, and the speed-based advisory strategy is more friendly for platoons with a human-operated leader. Results of numerical experiments demonstrate the significance when the eco-driving advisory system holistically considers energy consumption characteristics of platoon vehicles.     

Platooning on two-lane two-way highways: An empirical investigation

This paper presents an empirical investigation into platooning on two-lane two-way highways. The main objective is to better understand this phenomenon that has important implications on traffic performance and safety. Field data from three study sites in the state of Montana were used in this study. Separate investigations were performed to examine the relationships among platoon-related variables, namely; time headway, travel speed, and platoon size. The study confirmed that interaction between successive vehicles in the traffic stream generally diminishes beyond a time headway threshold value that fell in the range of 5–7 seconds. Also, the study revealed that very short headways (less than one second) are more associated with aggressive driving and higher speeds than with slow-moving platoons due to lack of passing opportunities. Further, the study found that amount of impedance to traffic is proportional to the size of platoon as evidenced by the relative difference between mean speed of various size platoons and the mean speed of unimpeded vehicles. The study provided other valuable insights into the platooning phenomenon on two-lane highways that are essential in developing a better understanding of traffic operation on two-lane highways.     

A microscopic simulation model for merging control on a dedicated-lane automated highway system

The automated highway systems (AHS) are not designed as stand-alone transportation facilities. Drivers will by necessity drive from their origins to the AHS entrance, and from the AHS exit to their final destinations. Therefore, the AHS will affect other transportation facilities, and should be integrated with all other facilities in the transportation system. Interfaces create much of the congestion for today’s transportation systems. Likewise, AHS interfaces may cause a similar problem, due to either AHS interactions with conventional systems or internal limitations from AHS merging capabilities. If these problems exist, either the AHS or the conventional road network cannot function properly. Consequently, the system as a whole may break down and the AHS could potentially become a detriment to the overall transportation system.Clearly, not enough is known about the automated merging process to determine what conditions would lead to congestion at interface points. The current macroscopic analysis techniques assume parameters that are not applicable to an AHS, and no detailed AHS merging models have been developed and validated. This paper addresses the interface problem between an AHS, and conventional roadway. Specifically, it presents a microscopic simulation model for one scenario of the automated merging maneuver. The results of the model show that for low flows and conventional highway speeds, an one-lane AHS merging section with a dedicated automated entrance ramp has many similar characteristics as a two-lane conventional freeway with or without fixed-time ramp metering. However, when the conventional freeway starts to “break down” near its capacity, the AHS continues to perform with little delay. The model also validates that the minimum ramp length requirements are a function of the merging vehicle’s speed, the mainline vehicles’ speed, and the acceleration and deceleration rates of the merging vehicle.     

A platoon based cooperative eco-driving model for mixed automated and human-driven vehicles at a signalised intersection

The advancements in communication and sensing technologies can be exploited to assist the drivers in making better decisions. In this paper, we consider the design of a real-time cooperative eco-driving strategy for a group of vehicles with mixed automated vehicles (AVs) and human-driven vehicles (HVs). The lead vehicles in the platoon can receive the signal phase and timing information via vehicle-to-infrastructure (V2I) communication and the traffic states of both the preceding vehicle and current platoon via vehicle-to-vehicle (V2V) communication. We propose a receding horizon model predictive control (MPC) method to minimise the fuel consumption for platoons and drive the platoons to pass the intersection on a green phase. The method is then extended to dynamic platoon splitting and merging rules for cooperation among AVs and HVs in response to the high variation in urban traffic flow. Extensive simulation tests are also conducted to demonstrate the performance of the model in various conditions in the mixed traffic flow and different penetration rates of AVs. Our model shows that the cooperation between AVs and HVs can further smooth out the trajectory of the latter and reduce the fuel consumption of the entire traffic system, especially for the low penetration of AVs. It is noteworthy that the proposed model does not compromise the traffic efficiency and the driving comfort while achieving the eco-driving strategy.     

A conceptualization of vehicle platoons and platoon operations

Vehicle platooning, a coordinated movement strategy, has been proposed to address a range of current transport challenges such as traffic congestion, road safety, energy consumption and pollution. But in order to form platoons in an ad-hoc manner the vehicles have to ‘speak the same language’, which is in current practice limited to vehicles of particular manufacturers. There is no standard language yet. Also in research, while the current literature focuses on platoon control strategies, intra-platoon communication, or platooning impacts on traffic, the conceptualization of platooning objects and their operations remained unattended. This paper aims to fill this fundamental gap by developing a formal model of platooning concepts. The paper proposes an ontological model of platooning objects and properties and abstract basic building blocks of platoon operations that can then be aggregated to complex platooning behavior. The presented ontological model provides the logical reasoning to support vital decision-making during platoon lifecycles. The ontological model is implemented and demonstrated.     

On the network connectivity of platoon-based vehicular cyber-physical systems

In the past few years, vehicular ad hoc networking (VANET) has attracted significant attention and many fundamental issues have been investigated, such as network connectivity, medium access control (MAC) mechanism, routing protocol, and quality of service (QoS). Nevertheless, most related work has been based on simplified assumptions on the underlying vehicle traffic dynamics, which has a tight interaction with VANET in practice. In this paper, we try to investigate VANET performance from the vehicular cyber-physical system (VCPS) perspective. Specifically, we consider VANET connectivity of platoon-based VCPSs where all vehicles drive in platoon-based patterns, which facilitate better traffic performance as well as information services. We first propose a novel architecture for platoon-based VCPSs, then we derive the vehicle distribution under platoon-based driving patterns on a highway. Based on the results, we further investigate inter-platoon connectivity in a bi-directional highway scenario and evaluate the expected time of safety message delivery among platoons, taking into account the effects of system parameters, such as traffic flow, velocity, platoon size and transmission range. Extensive simulations are conducted which validate the accuracy of our analysis. This study will be helpful to understand the behavior of VCPSs, and will be helpful to improve vehicle platoon design and deployment.     

A real-time traffic signal control system: architecture, algorithms, and analysis

The paper discusses a real-time traffic-adaptive signal control system referred to as RHODES. The system takes as input detector data for real-time measurement of traffic flow, and “optimally” controls the flow through the network. The system utilizes a control architecture that (1) decomposes the traffic control problem into several subproblems that are interconnected in an hierarchical fashion, (2) predicts traffic flows at appropriate resolution levels (individual vehicles and platoons) to enable pro-active control, (3) allows various optimization modules for solving the hierarchical subproblems, and (4) utilizes a data structure and computer/communication approaches that allow for fast solution of the subproblems, so that each decision can be downloaded in the field appropriately within the given rolling time horizon of the corresponding subproblem. The RHODES architecture, algorithms, and its analysis are presented. Laboratory test results, based on implementation of RHODES on simulation models of actual scenarios, illustrate the effectiveness of the system.     

Multi-destination traffic flow control in automated highway systems

Traffic flow control in automated highway systems (AHS) is addressed. A link layer controller for a hierarchical AHS architecture is presented. The controller proposed in this paper stabilizes the vehicular density and flow around predetermined profiles in a stretch of highway using speed and lane changes as control signals. Multiple lane highways in which vehicles have different destinations and types are considered. The control laws are derived from a model based on a principle of vehicle conservation and Lyapunov stability techniques. The implementation requires only local information. Simulation results are presented.     

Constrained optimization and distributed computation based car following control of a connected and autonomous vehicle platoon

Motivated by the advancement in connected and autonomous vehicle technologies, this paper develops a novel car-following control scheme for a platoon of connected and autonomous vehicles on a straight highway. The platoon is modeled as an interconnected multi-agent dynamical system subject to physical and safety constraints, and it uses the global information structure such that each vehicle shares information with all the other vehicles. A constrained optimization based control scheme is proposed to ensure an entire platoon’s transient traffic smoothness and asymptotic dynamic performance. By exploiting the solution properties of the underlying optimization problem and using primal-dual formulation, this paper develops dual based distributed algorithms to compute optimal solutions with proven convergence. Furthermore, the asymptotic stability of the unconstrained linear closed-loop system is established. These stability analysis results provide a principle to select penalty weights in the underlying optimization problem to achieve the desired closed-loop performance for both the transient and the asymptotic dynamics. Extensive numerical simulations are conducted to validate the efficiency of the proposed algorithms.     

Characterising Green Light Optimal Speed Advisory trajectories for platoon-based optimisation

Conceptually, a Green Light Optimal Speed Advisory (GLOSA) system suggests speeds to vehicles, allowing them to pass through an intersection during the green interval. In previous papers, a single speed is computed for each vehicle in a range between acceptable minimum and maximum values (for example between standstill and the speed limit). This speed is assumed to be constant until the beginning of the green interval, and sent as advice to the vehicle. The goal is to optimise for a particular objective, whether it be minimisation of emissions (for environmental reasons), fuel usage or delay. This paper generalises the advice given to a vehicle, by optimising for delay over the entire trajectory instead of suggesting an individual speed, regardless of initial conditions – time until green, distance to intersection and initial speed. This may require multiple acceleration manoeuvres, so the advice is sent as a suggested acceleration at each time step. Such advice also takes into account a suitable safety constraint, ensuring that vehicles are always able to stop before the intersection during a red interval, thus safeguarding against last-minute signal control schedule changes. While the algorithms developed primarily minimise delay, they also help to reduce fuel usage and emissions by conserving kinetic energy. Since vehicles travel in platoons, the effectiveness of a GLOSA system is heavily reliant on correctly identifying the leading vehicle that is the first to be given trajectory advice for each cycle. Vehicles naturally form a platoon behind this leading vehicle. A time loop technique is proposed which allows accurate identification of the leader even when there are complex interactions between preceding vehicles. The developed algorithms are ideal for connected autonomous vehicle environments, because computer control allows vehicles’ trajectories to be managed with greater accuracy and ease. However, the advice algorithms can also be used in conjunction with manual control provided Vehicle-to-Infrastructure (V2I) communication is available.     

Vehicle reidentification and travel time measurement on congested freeways

The paper presents an algorithm for matching individual vehicles measured at a freeway detector with the vehicles’ corresponding measurements taken earlier at another detector located upstream. Although this algorithm is potentially compatible with many vehicle detector technologies, the paper illustrates the method using existing dual-loop detectors to measure vehicle lengths. This detector technology has seen widespread deployment for velocity measurement. Since the detectors were not developed to measure vehicle length, these measurements can include significant errors. To overcome this problem, the algorithm exploits drivers’ tendencies to retain their positions within dense platoons. The otherwise complicated task of vehicle reidentification is carried out by matching these platoons rather than individual vehicles. Of course once a vehicle has been matched across neighboring detector stations, the difference in its arrival time at each station defines the vehicle’s travel time on the intervening segment.Findings from an application of the algorithm over a 1/3 mile long segment are presented herein and they indicate that a sufficient number of vehicles can be matched for the purpose of traffic surveillance. As such, the algorithm extracts travel time data without requiring the deployment of new detector technologies. In addition to the immediate impacts on traffic monitoring, the work provides a means to quantify the potential benefits of emerging detector technologies that promise to extract more detailed information from individual vehicles.     

Phasing out lead in automotive fuels: conversion considerations, policy formulation, and application to Lebanon

The serious public health effects of lead are widely recognized, and many countries of the world have taken steps to completely eliminate it from automotive fuels. This study reviews the international experience with phasing out leaded gasoline; considerations affecting adoption of unleaded fuel are identified, and difficulties underlying change are synthesized. Factors related to technology, supply availability, distribution channels, economics, and social equity are underlined. International experience is distilled into a set of desirable characteristics of policies for phasing out leaded fuel. Such desirable properties include robustness vis-à-vis enforcement and compliance, the existence of a few “control points”, flexibility with respect to future vehicle and fuel technologies, cost-neutrality, and fairness in terms of incidence on socio-economic groups. The case of Lebanon is considered in structuring a practical strategy for phasing out leaded fuel. Positive and negative factors likely to affect the success of lead phaseout strategies in Lebanon are identified. Consideration of these factors along with the desirable attributes of successful policies has led to the development of a recommended plan for leaded fuel phaseout.     

Platooning for sustainable freight transportation: an adoptable practice in the near future?

ABSTRACT

Platooning is an emerging transportation practice that has the potential to solve the problems of the burgeoning transportation industry. A platoon is a group of vehicles, with vehicle to vehicle communication, that travel closely behind one another such that the platoon can accelerate, brake and cruise together. Platoons can improve road safety, be energy efficient and reduce costs. Its complete socio-economic benefits include congestion mitigation, smoother traffic flow, better lane usage and throughput, incentives for green logistics and driver safety. The long-term effect of platooning on road transportation, if extensively deployed, would be better organised traffic flow and efficient tracking of vehicles on the road ushering a multilevel positive impact on the industry. In this study, we attempt to answer the critical question of whether platooning is an adoptable practice in the near future and discuss an agenda to take platooning closer to implementation on the ground by highlighting the opportunities for future research. We also present a conceptual framework to help researchers, academicians, policy makers and practitioners for the adoption of platooning into the transportation industry.     

Dynamics of connected vehicle systems with delayed acceleration feedback

In this paper, acceleration-based connected cruise control (CCC) is proposed to increase roadway traffic mobility. CCC is designed to be able to use acceleration signals received from multiple vehicles ahead through wireless vehicle-to-vehicle (V2V) communication. We consider various connectivity structures in heterogeneous platoons comprised of human-driven and CCC vehicles. We show that inserting a few CCC vehicles with appropriately designed gains and delays into the flow, one can stabilize otherwise string unstable vehicle platoons. Exploiting the flexibility of ad-hoc connectivity, CCC can be applied in a large variety of traffic scenarios. Moreover, using acceleration feedback in a selective manner, CCC provides robust performance and remains scalable for large systems of connected vehicles. Our conclusions are verified by simulations at the nonlinear level.     

An experimental comparative study of autonomous and co-operative vehicle-follower control systems

This paper is a comparative study of the performance of constant-time-gap autonomous control systems and co-operative longitudinal control systems that use inter-vehicle communication. Analytical results show that the minimum time gap that can be achieved in autonomous control is limited by the bandwidth of the internal dynamics of the vehicle. Experimental results from typical sensors and actuators are used to show that in practice it is very difficult to achieve a time gap less than 1 s with autonomous vehicle following. This translates to an inter-vehicle spacing of 30 m at highway speeds and a theoretical maximum traffic flow of about 3000 vehicles per hour. The quality of radar range and range rate measurements pose limitations on the spacing accuracy and ride quality that can be achieved in autonomous control. Dramatic improvements in the trade-off between ride quality and spacing accuracy can be obtained merely by replacing radar range rate in the autonomous control algorithm with the difference between the measured velocities of the two cars (a rudimentary form of co-operation). As a baseline comparison, the experimental performance of fully co-operative control is presented. An inter-vehicle spacing of 6.5 m is maintained in a platoon of 8 co-operative vehicles with an excellent ride quality and an accuracy of ±20 cm. Extending this to a 10-vehicle platoon makes it possible to achieve theoretical maximum traffic flows of about 6400 vehicles per hour.Another issue of importance addressed in the paper is the need to accommodate malfunctions in radar (ranging sensor) measurements. Measurement errors can occur due to hardware malfunctions as well as due to road curves, grades and the highway environment in the case of large inter-vehicle spacing. The ability of a co-operative control system to monitor the health of the radar and correct for such errors and malfunctions is demonstrated experimentally.     

Multi-regime arrival rate uniform delay models for signalized intersections

This paper presents the development and validation of uniform delay models for coordinated signalized intersections. The Highway Capacity Manual (HCM) identifies one uniform and five non-uniform (platoon) arrival types. Delays for non-uniform arrival cases are computed by applying progression adjustment factors (PFs) to the delay for uniform arrival case. The range of PF is from 0% to 256%. We found that the PF approach produced accurate results for only one-half of cases. This paper presents an Arrival-Based approach that eliminates the needs for applying PF. The AB approach directly considers the effects of quality of progression in formulating delay models. It uses different flow rates for vehicles within and outside platoons. A total of 11 different delay models were derived to cover all arrival cases. Data from three different states were used for validation of AB delay models. The results indicate that AB models provided accurate results for all arrival types. However, HCM uniform delay model was not accurate for Arrival Types 1, 4 and 6. Furthermore, the results of cycle-by-cycle delay analyses showed that the difference between field delays and AB models were not significant, but that was not the case for the HCM model. The AB models can be simplified to yield the HCM uniform delay model, if a single regime arrival rate is assumed. Single regime arrival rate implies that the flow rate for vehicles in platoon is the same as those arriving randomly. For only the uniform arrival case, the AB delay model is identical to the HCM delay model; thus making the HCM uniform delay model a special case of AB models.     

Effect of signal coordination on traffic emission

This study investigates the effect of traffic signal coordination on emissions and compares it with their effects on operational performance measures of delay and stops. Various platoon ratios are obtained by simulating cycle lengths and offsets. Our results indicate that the impact of the cycle length on delay is more significant than those on stops and emissions for under-saturation traffic conditions. Given a fixed cycle length, increasing the platoon ratio can reduce delay, stops, and emissions, with reduction in emissions being correlated with stops than delay. The effect on emissions from the platoon arrival with respect to the onset of green or red indication is identified. With the same cycle length and platoon ratio, the early arrival situation, when the leading vehicles of a platoon encounters the red signal, can generate more emissions than are associated with late platoon arrival, when the last few vehicles in a platoon are stopped at the intersection by the onset of the red signal.     

The simple platoon advancement model of its technologies applied to vehicle control at signalised intersections

The Simple Platoon Advancement (SPA) Model describes a conceptual system whose principal objective is to increase the throughput of vehicles at signalised intersections. This is achieved through a novel combination of Intelligent Transport System (ITS) technologies including Automatic Cruise Control, Lane Departure Avoidance, and Collision Avoidance. These are combined in SPA so that vehicles are progressed through signalised intersections under automated control. All of the vehicles in a stationary queue are moved instantly at the start‐of‐green as a closely‐spaced platoon. Dispersion occurs after all vehicles are in motion. Throughput of the SPA model is determined analytically and comparisons are made between the SPA model and a valid representation of current road traffic behaviour. These comparisons show that theoretically a SPA system can progress nearly twice as many vehicles past the stopline as can be seen in today's road network. Other benefits of a conceptual SPA system are improved safety and a reduction in delay per vehicle.     

Coordinated platooning with multiple speeds

In a platoon, vehicles travel one after another with small intervehicle distances; trailing vehicles in a platoon save fuel because they experience less aerodynamic drag. This work presents a coordinated platooning model with multiple speed options that integrates scheduling, routing, speed selection, and platoon formation/dissolution in a mixed-integer linear program that minimizes the total fuel consumed by a set of vehicles while traveling between their respective origins and destinations. The performance of this model is numerically tested on a grid network and the Chicago-area highway network. We find that the fuel-savings factor of a multivehicle system significantly depends on the time each vehicle is allowed to stay in the network; this time affects vehicles’ available speed choices, possible routes, and the amount of time for coordinating platoon formation. For problem instances with a large number of vehicles, we propose and test a heuristic decomposed approach that applies a clustering algorithm to partition the set of vehicles and then routes each group separately. When the set of vehicles is large and the available computational time is small, the decomposed approach finds significantly better solutions than does the full model.