Crack detection using a frequency response function in offshore platforms

Structural cracks can change the frequency response function (FRF) of an offshore platform. Thus, FRF shifts can be used to detect cracks. When a crack at a specific location and magnitude occurs in an offshore structure, changes in the FRF can be measured. In this way, shifts in FRF can be used to detect cracks. An experimental model was constructed to verify the FRF method. The relationship between FRF and cracks was found to be non-linear. The effect of multiple cracks on FRF was analyzed, and the shift due to multiple cracks was found to be much more than the summation of FRF shifts due to each of the cracks. Then the effects of noise and changes in the mass of the jacket on FRF were evaluated. The results show that significant damage to a beam can be detected by dramatic changes in the FRF, even when 10% random noise exists. FRF can also be used to approximately locate the breakage, but it can neither be efficiently used to predict the location of breakage nor the existence of small hairline cracks. The FRF shift caused by a 7% mass change is much less than the FRF shift caused by the breakage of any beam, but is larger than that caused by any early cracks.     

Finite element simplified fatigue analysis method for a non-tubular joint of an offshore jacket platform

This paper proposes the finite element simplified fatigue analysis method for fatigue evaluation of the composite non-tubular joint structure of an offshore jacket subjected to wave loads. The skirt pile sleeve of the offshore jacket, which had been in service, was taken as an example of the non-tubular joint structure. SACS software was used for global analysis of multi-directional wave loads for the jacket platform, and ALGOR software was used to build a finite element model, perform finite element analysis, post-process stress results for acquiring the stress range, and perform fatigue evaluation. The analysis results indicate that the extreme stress range is within the allowable stress range and meets the requirements of DNV code. That means the simplified fatigue analysis method is effective and can be used in fatigue design for the non-tubular joint structure of an offshore jacket.     

Structural-acoustic optimization of stiffened panels based on a genetic algorithm

For the structural-acoustic radiation optimization problem under external loading,acoustic radiation power was considered to be an objective function in the optimization method. The finite element method(FEM) and boundary element method(BEM) were adopted in numerical calculations,and structural response and the acoustic response were assumed to be de-coupled in the analysis. A genetic algorithm was used as the strategy in optimization. In order to build the relational expression of the pressure objective function and the power objective function,the enveloping surface model was used to evaluate pressure in the acoustic domain. By taking the stiffened panel structural-acoustic optimization problem as an example,the acoustic power and field pressure after optimized was compared. Optimization results prove that this method is reasonable and effective.     

支持向量机和遗传算法组合策略的VLCC船中结构优化设计(英文)

In this paper a hybrid process of modeling and optimization,which integrates a support vector machine(SVM) and genetic algorithm(GA),was introduced to reduce the high time cost in structural optimization of ships.SVM,which is rooted in statistical learning theory and an approximate implementation of the method of structural risk minimization,can provide a good generalization performance in metamodeling the input-output relationship of real problems and consequently cuts down on high time cost in the analysis of real problems,such as FEM analysis.The GA,as a powerful optimization technique,possesses remarkable advantages for the problems that can hardly be optimized with common gradient-based optimization methods,which makes it suitable for optimizing models built by SVM.Based on the SVM-GA strategy,optimization of structural scantlings in the midship of a very large crude carrier(VLCC) ship was carried out according to the direct strength assessment method in common structural rules(CSR),which eventually demonstrates the high efficiency of SVM-GA in optimizing the ship structural scantlings under heavy computational complexity.The time cost of this optimization with SVM-GA has been sharply reduced,many more loops have been processed within a small amount of time and the design has been improved remarkably.     

Detecting damage to offshore platform structures using the time-domain data

A new method that uses time-domain response data under random loading is proposed for detecting damage to the structural elements of offshore platforms. In our study, a time series model with a fitting order was first constructed using the time-domain of noise data. A sensitivity matrix consisting of the first differential of the autoregressive coefficients of the time series models with respect to the stiffness of structural elements was then obtained based on time-domain response data. Locations and severity of damage may then be estimated by solving the damage vector whose components express the degrees of damage to the structural elements. A unique aspect of this detection method is that it requires acceleration history data from only one or a few sensors. This makes it feasible for a limited array of sensors to obtain sufficient data. The efficiency and reliability of the proposed method was demonstrated by applying it to a simplified offshore platform with damage to one element. Numerical simulations show that the use of a few sensors＇ acceleration history data, when compared with recorded levels of noise, is capable of detecting damage efficiently. An increase in the number of sensors helps improve the diagnosis success rate.     

采用遗传算法进行球鼻艏优化的流体动力计算(英文)

Computational fluid dynamics(CFD) plays a major role in predicting the flow behavior of a ship.With the development of fast computers and robust CFD software,CFD has become an important tool for designers and engineers in the ship industry.In this paper,the hull form of a ship was optimized for total resistance using CFD as a calculation tool and a genetic algorithm as an optimization tool.CFD based optimization consists of major steps involving automatic generation of geometry based on design parameters,automatic generation of mesh,automatic analysis of fluid flow to calculate the required objective/cost function,and finally an optimization tool to evaluate the cost for optimization.In this paper,integration of a genetic algorithm program,written in MATLAB,was carried out with the geometry and meshing software GAMBIT and CFD analysis software FLUENT.Different geometries of additive bulbous bow were incorporated in the original hull based on design parameters.These design variables were optimized to achieve a minimum cost function of "total resistance".Integration of a genetic algorithm with CFD tools proves to be effective for hull form optimization.     

基于塑性模型的钢悬链立管疲劳分析（英文）

The most critical issue in the steel catenary riser design is to evaluate the fatigue damage in the touchdown zone accurately. Appropriate modeling of the riser-soil resistance in the touchdown zone can lead to significant cost reduction by optimizing design. This paper presents a plasticity model that can be applied to numerically simulate riser-soil interaction and evaluate dynamic responses and the fatigue damage of a steel catenary riser in the touchdown zone. Utilizing the model, numerous riser-soil elements are attached to the steel catenary riser finite elements, in which each simulates local foundation restraint along the riser touchdown zone. The riser-soil interaction plasticity model accounts for the behavior within an allowable combined loading surface. The model will be represented in this paper, allowing simple numerical implementation. More importantly, it can be incorporated within the structural analysis of a steel catenary riser with the finite element method. The applicability of the model is interpreted theoretically and the results are shown through application to an offshore 8.625″ steel catenary riser example. The fatigue analysis results of the liner elastic riser-soil model are also shown. According to the comparison results of the two models, the fatigue life analysis results of the plasticity framework are reasonable and the horizontal effects of the riser-soil interaction can be included.     

Energy Optimization of the Fin/Rudder Roll Stabilization System Based on the Multi-objective Genetic Algorithm (MOGA)

Energy optimization is one of the key problems for ship roll reduction systems in the last decade. According to the nonlinear characteristics of ship motion, the four degrees of freedom nonlinear model of Fin/Rudder roll stabilization can be established. This paper analyzes energy consumption caused by overcoming the resistance and the yaw, which is added to the fin/rudder roll stabilization system as new performance index. In order to achieve the purpose of the roll reduction, ship course keeping and energy optimization, the self-tuning PID controller based on the multi-objective genetic algorithm(MOGA) method is used to optimize performance index. In addition, random weight coefficient is adopted to build a multi-objective genetic algorithm optimization model. The objective function is improved so that the objective function can be normalized to a constant level. Simulation results showed that the control method based on MOGA, compared with the traditional control method, not only improves the efficiency of roll stabilization and yaw control precision, but also optimizes the energy of the system. The proposed methodology can get a better performance at different sea states.     

Multi-objective optimization study on dimensions of medium-sized cruise ship in concept phase北大核心CSCD

［Objective］Aiming at the problem of too many influencing factors and too little reference data for determining the dimensions of medium-sized cruise ships in the concept phase, a simplified multi-objective optimization method based on the fitting of dimensions and performance is proposed. ［Method］First, the dimension relations of medium-sized cruise ships are analyzed and the influence of the latest SOLAS requirements used to determine the optimization range. Second, the influence of cruise ship dimensions on space, resistance, stability and seakeeping are analyzed. Next, based on the principles of genetic algorithms, a multiobjective optimization algorithm with high robustness and high engineering adaptability is determined to establish a multi-objective optimization model for the concept design of medium-sized cruise ships. Finally, the Pareto solution obtained by multi-objective optimization is analyzed to provide initial references for determining the dimensions of the target cruise ship. ［Results］Implemented via a genetic algorithm, the optimization program proposed herein is applied in the concept design of a medium-sized cruise ship in order to optimize the initial dimensions, thereby achieving the expected outcome of providing reasonable initial dimensions for cruise ship design. ［Conclusion ］ The proposed simplified multi-objective optimization model can provide feasible initial dimensions for medium-sized cruise ships in the concept phase. As the Pareto solution obtained by multi-objective optimization has different focuses such as resistance and stability, the most suitable solution needs to be selected according to the design object. © 2023 Chinese Journal of Ship Research. All rights reserved.     

Application of the optimal Latin hypercube design and radial basis function network to collaborative optimization

Improving the efficiency of ship optimization is crucial for modern ship design. Compared with traditional methods, multidisciplinary design optimization (MDO) is a more promising approach. For this reason, Collaborative Optimization (CO) is discussed and analyzed in this paper. As one of the most frequently applied MDO methods, CO promotes autonomy of disciplines while providing a coordinating mechanism guaranteeing progress toward an optimum and maintaining interdisciplinary compatibility. However, there are some difficulties in applying the conventional CO method, such as difficulties in choosing an initial point and tremendous computational requirements. For the purpose of overcoming these problems, optimal Latin hypercube design and Radial basis function network were applied to CO. Optimal Latin hypercube design is a modified Latin Hypercube design. Radial basis function network approximates the optimization model, and is updated during the optimization process to improve accuracy. It is shown by examples that the computing efficiency and robustness of this CO method are higher than with the conventional CO method.     

计算小波分布判定海洋平台结构损伤方法研究

由于海洋平台结构长期处于恶劣的海洋环境中,并受到各种载荷的交互作用,结构容易产生各种形式的损伤。因此,对海洋平台进行实时监测有着十分重要的现实意义。本文以单筒简易导管架平台为例,主要在结构损伤的判定和定位两方面对海洋平台的实时结构健康监测进行研究,结果表明通过对结构响应信号进行小波分析,小波变换系数和小波包能量分布可以很好地定义损伤识别指标。     

利用一种改进的模态应变能法诊断海洋平台结构的损伤（英文）

The development of robust damage detection methods for offshore structures is crucial to prevent catastrophes caused by structural failures. In this research, we developed an Improved Modal Strain Energy(IMSE) method for detecting damage in offshore platform structures based on a traditional modal strain energy method(the Stubbs index method). The most significant difference from the Stubbs index method was the application of modal frequencies. The goal was to improve the robustness of the traditional method. To demonstrate the effectiveness and practicality of the proposed IMSE method, both numerical and experimental studies were conducted for different damage scenarios using a jacket platform structure. The results demonstrated the effectiveness of the IMSE method in damage location when only limited, spatially incomplete, and noise-polluted modal data is available. Comparative studies showed that the IMSE index outperformed the Stubbs index and exhibited stronger robustness, confirming the superiority of the proposed approach.     

An improved modal strain energy method for damage detection in offshore platform structures

The development of robust damage detection methods for offshore structures is crucial to prevent catastrophes caused by structural failures. In this research, we developed an Improved Modal Strain Energy (IMSE) method for detecting damage in offshore platform structures based on a traditional modal strain energy method (the Stubbs index method). The most significant difference from the Stubbs index method was the application of modal frequencies. The goal was to improve the robustness of the traditional method. To demonstrate the effectiveness and practicality of the proposed IMSE method, both numerical and experimental studies were conducted for different damage scenarios using a jacket platform structure. The results demonstrated the effectiveness of the IMSE method in damage location when only limited, spatially incomplete, and noise-polluted modal data is available. Comparative studies showed that the IMSE index outperformed the Stubbs index and exhibited stronger robustness, confirming the superiority of the proposed approach.     

环境激励下自升式海洋平台损伤诊断

为探究适用于海洋平台结构的有效损伤诊断方法,针对某自升式平台的比例模型开展环境激励下损伤诊断试验研究。分别采用频域法中的增强频域分解法和时域法中的随机子空间法处理测试数据,提取前三阶的固有频率、振型和阻尼比等模态参数,并结合频率和振型识别结果计算节点柔度矩阵。通过分析平台模型模态参数和节点柔度矩阵的变化率,识别预先设置的结构损伤。试验结果表明,两种模态识别方法均能有效识别环境激励下的平台模型模态参数,其中利用固有频率变化率能够有效判断结构是否产生损伤,利用振型和柔度矩阵的变化率能够实现损伤的准确定位。     

Efficient optimization design method of jacket structures for offshore wind turbines

With the gradual implementation of offshore wind energy production, the future tendency is to expand into the deeper water. The jacket foundations will take the place of the present monopile foundations when the water depth increases. The foundations account for the majority of the construction cost for offshore wind farms, and the structural optimization of jackets will bring lucrative economic benefits. Structural optimization is a complex iterative process that requires huge computing costs. Therefore, this paper proposes a structural optimization method based on surrogate models to solve this problem effectively and swiftly obtain optimized design schemes of lightweight jackets for offshore wind turbines. The structural responses of jacket wind turbine systems under the equivalent static extreme loads with a recurrence period of 50 years are mainly considered in structural optimization design, and the key optimization variables of jackets are determined by parameter sensitivity analysis. The finite element models of jackets are transformed into surrogate models, and the genetic algorithm is employed to optimize the surrogate models directly. The optimized jackets are additionally verified through coupled dynamic analysis, besides, buckling strength and fatigue life are also checked. And local refined optimizations are carried out for the failure members. According to the optimized design schemes of lightweight jackets for 30 m, 50 m and 70 m water depths, it is demonstrated that the structural optimization design method is adequate and efficient for jackets of wind turbines. Parameter sensitivity analysis can cut the number of optimization variables in half to improve the optimization efficiency. Furthermore, the application of surrogate models can significantly speed up the optimization process by saving about 98.61% of the original time consumed. The optimization design method of the jackets for offshore wind turbines proposed in this paper is suitable for practical engineering, with high precision and efficiency.     

我国海上导管架平台抗冰锥体的设计实践

冰激振动是渤海重冰区导管架平台的主要危害.渤海重冰区导管架平台在腿柱上安装了抗冰锥体,基本解决了平台冰激振动问题.主要阐述了抗冰锥体的基本抗冰原理和设计方法,分析了渤海典型导管架平台抗冰锥体的设计实践,对渤海重冰区导管架平台和抗冰锥体的设计提出了建议.     

一种基于改进的减缩模型修正方法

提出一种改进的模型修正方法,该方法采用多目标优化技术使得结构的减缩模型与实测结果相吻合。即首先建立一个多目标优化模型,其中包括一个关于单元修正系数的隐式非线性特征方程组,然后通过遗传算法来求解该多目标优化问题,来同时实现模型修正和损伤检测。文中通过对一个悬臂梁的数值仿真,表明本文所提出的方法的有效性,即在较大的测量噪声的情况下,同时具有模型修正和损伤检测两种功能,且较改进前的基于迭代的方法具有更好的噪声鲁棒性。     

ROV在导管架检查中的应用与安全管理

海上石油平台安装后,需要定期对导管架水下检查,以确保人员和生命财产安全。ROV遥控潜水器类似于一种＂带缆的水下机器人＂。在超过空气潜水范围的水深处检查具有明显的安全、效率、成本优势。介绍了ROV的功能和优势,介绍了固定式平台之钢质导管架式平台特点。以某导管架为案例,详细介绍了ROV的操作步骤。并介绍了ROV作业中的风险...     

导管架平台拆除作业

根据海洋平台服役年限规定和相关法律法规要求,介绍国内外海洋平台拆除现状,分析海洋平台拆除的市场前景。以海洋平台中典型的四腿式简易导管架平台为研究对象,阐述拆除作业的流程和注意事项,对比导管架平台的常用切割技术,为相关企业海洋平台的拆除作业提供借鉴。     

Damage detection of offshore jacket structures using frequency domain selective measurements

The development of damage detection techniques for offshore jacket structures is vital to prevent catastrophic events. This paper applies a frequency response based method for the purpose of structural health monitoring. In efforts to fulfill this task, concept of the minimum rank perturbation theory has been utilized. The present article introduces a promising methodology to select frequency points effectively. To achieve this goal, modal strain energy ratio of each member was evaluated at different natural frequencies of structure in order to identify the sensitive frequency domain for damage detection. The proposed methodology opens up the possibility of much greater detection efficiency. In addition, the performance of the proposed method was evaluated in relation to multiple damages. The aforementioned points are illustrated using the numerical study of a two dimensional jacket platform, and the results proved to be satisfactory utilizing the proposed methodology.