Dynamic Simulation and Performance Investigation of No-Frost Refrigerator： Part Ⅱ System Simulation and Performance Analysis

The methodology for modeling no-frost refrigerator is described based on the component models developed in Part I, and then, system simulation is applied to a BCD-235W refrigerator-freezer (RF). Experiments are carried out to study “pull-down” and steady-state performance of the RF, and to determine how the experiment and simulation temperature stack up against each other. Good match is found between simulated and measured results for the “pull-down” period. For the steady-state period, the simulation results are also found to agree well with experiment ones except for the temperature profiles of the refrigerator compartment (RC) and freezer compartment (FC). The average temperature and the energy consumption errors between measurement and simulation are less than 10%. Although the model can not reflect the non-uniform air temperature fields in the RC and FC, the variation range and periodicities of the temperature correlate well between the simulation and experiment. We conclude that such a model is valid for investigating the performance of no-frost refrigerator.      

Dynamic Simulation and Performance Investigation of No-frost Refrigerator: Part Ⅰ Mathematical Model

A dynamic approach for the modeling, simulation and analysis of no-frost Refrigerator (RF) is dis-cussed. In Part Ⅰ, the complex interactions among the components in the cooling system are analyzed in detail, based on which the modeling simplifications are proposed. Then, the mathematical models for the evaporator, cabinet and duct-fan are presented. The whole system is divided into two subsystems-refrigerant cycling system and air cycling system. In order to simplify the model, two closed-loop systems are broken into the compressor component and the evaporator component, respectively. A general distributed parameter model is employed for evaporator with homogeneous flow to simplify the two-phase evaporating flow region. The z-transfer function model is used to describe the cabinet load. Computational fluid dynamics (CFD) method is employed to obtain the pressure drop and flow rate curve of the duct-fan model.     

Simulation Modeling and Analysis of Operator-Machine Ratio

Introduction In recent years, labor cost in China is continu-ously and significantly increasing across industries.More and more companies, particularly semiconduc-tor companies, are taking strategies to cut labor costwithout impairing normal production. Operator-ma-chine ratio (OMR) denotes the maximum number oftools a laborer can operate. It is a measure of opera-tion efficiency of an operator and one of key factors toensure the competitiveness.The traditional static Excel model[1]involvin…     

Differentiation-Based Analysis of Environmental Management and Corporate Performance

Introduction Environmental deterioration make the societyconcern about the corporate environmental perform-ance, which urges more and more managers to intro-duce environmental management into their corporatestrategies. While most of the managers find them…     

Performance Comparison and Analysis of Heating and Ventilation of Two Kinds of Roof Solar Collectors

Two roof solar collectors (RSCs), conventional single pass RSC and new double pass RSC, were compared. The new roof solar collector, which is formed by integrating a double pass solar air collector with the roof of the building, can be operated more efficiently for space heating in winter, and for natural ventilation in other seasons. To evaluate the performances of the two RSCs for both space heating and natural ventilation, a single traditional Chinese style house, on which the two RSCs will be mounted, was developed. The efficiency of solar energy conversion for the new RSC is higher than that of the single pass one by 10% on average, and the ventilation rate contributed by natural ventilation for the new RSC can be improved to a great extent for most cases, indicating that the new RSC is superior to the single pass one from the viewpoint of both space heating and natural ventilation. The new RSC is more potential for improving indoor thermal environment and energy saving of buildings.     

Stability Analysis of Continuous-Time Fuzzy Large-Scale System

IntroductionSincefuzzylogicwasintroducedintotheanalysisanddesignofcontrolsystemsbyZadehin 1 96 5[1] ,ithasbecomeaverypopulartopicincontrolengineering[2 4] ,mainlybecauseofthefollowingtwopoints :1 )ithastheadvantagethatnoformalmathematicalmodelsisneededan…     

Web-Based Interactive VR-CAD System for Conceptual Design and Analysis

Introduction Exploring a large number of design variants in aconceptual design phase assists in identifying the mostcost-effective design. However, how to capture userintents is challenging[1]. Although the necessity andadvantages of integrating customers into the innova-tion process are widely recognized[2], customers havea passive role in this design involvement process. Thefirst reason is the complexity of modeling tools. Most3D product mockups are created using commercialCAD packages or …     

Synthetically Evaluation System for Multi-source Image Fusion and Experimental Analysis

Introduction The image fusion technology produces a singleimage from a set of input images. The fused imageshould have more complete information which ismore useful for human or machine perception.With the merits of high degree of system explo-ration, automation, availability, reliability, capa-bility and low cost, it boasts broad application per-spective in many fields such as computer vision,automatic object detection, image processing, par-allel and distributed processing, robotics and re-m…     

Performance Analysis of Schemes in Fixed Two Frequency Reuse Relay Systems

An upsurge of interest in relay-augmented infrastructure-based networks has appeared in recent years. Radio resource management in such relay systems has great influence on the system performance. How to utilize the limited frequency resources efficiently in the system is a hot research topic. In this paper, performance of frequency reuse schemes has been studied in fixed relay systems. A novel scheme is achieved by modifying an existing one. Theoretical model is proposed for the performance analysis of two schemes. Both the theoretical analysis and simulation results show that the modified scheme outperforms the existing one not only in power consumption of mobile stations but also in cell carrier-to-interference ratio coverage.     

Robust Stability and Performance Comparison of PID and PPI Control

Predictive PI (PPI) control form, capable of time delay compensation, has been put forward recently.This control algorithm is essentially a PI controller with enhanced derivative action, which is not only suitable for long time delay process, but also of simple structure and excellent robust stability. The performance of PPI controller was demonstrated and compared with that of traditional PID controller by different tuning methods.     

Identification Simulation for Dynamical System Based on Genetic Algorithm and Recurrent Multilayer Neural Network

Introduction　　Inpracticalapplication ,thereexistmoreorlessnonlinearphenomenainamajorityofphysicalsystems .Inordertostudythesekindsofphysicialsystems ,anonlinearsystemmodelmustbesetupfirstofall,andthensomeparametersidentificationofthepredefinedmodelmustb…     

Simulation and analysis of flexible solar panels’ deployment and locking processes

To predict the attitude of satellite during the whole deployment process and evaluate the lockingimpact, a numerical flexible model of a certain satellite associated with four flexible honeycomb solar panelswas established. The flexible solar panel was modeled by the finite element analysis (FEA), and the motionequations were derived by Lagrangian formulation. The locking process was based on the method of Hertziancontact, which enables one to predict the locking impact on the satellite and the subsequent oscillation of solarpanels. The results reveal that locking operation has great impact on the attitude of the satelhte, and theangular acceleration of satellite reaches 22.03 °/s2 at the locking moment; the flexible solar panels model isfeasible to predict the accurate response of the satelhte during deployment and the oscillation of solar panels;the instantly impulsive force occurred during locking process is about 1.5 kN and the changing time is nearly0.32 s. It provides an effective approach to present the flexible solar panels' deployment process and evaluatethe locking impact.     

Network Decomposition and Maximum Independent Set Part Ⅱ：Application Research

According to the researches on theoretic basis in part I of the paper，the spanning tree algorithms solving the maximum independent set both in even network and in odd network have been developed in this part，part Ⅱ of the paper．The algorithms trans form first the general network into the pair sets network，and then decompose the pair sets network into a series of pair subsets by use of the characteristic of maximum flow passing through the pair sets network．As for the even network，the algorithm requires only one time of trans formation and decomposition，the maximum independent set can be gained without any iteration processes，and the time complexity of the algorithm is within the bound of O(｜V｜^3)．However，as for the odd network，the algorithm consists of two stages．In the first stage，the general odd network is transformed and decomposed into the pseudo-negative envelope graphs and generalized reverse pseudo-negative envelope graphs alternately distributed at first；then the algorithm turns to the second stage，searching for the negative envelope graphs within the pseudo-negative envelope graphs only．Each time as a negative envelope graphhas been found．renew the pair sets network by iteration at once．and then tum back to the first stage．So both stages form a circulation process up to the optimum．Two available methods，the adjusting search and the picking-off search are specially developed to deal with the problems resulted from the odd network．Both of them link up with each other harmoniously and are embedded together in the algorithm．Analysis and study indicate that the time complexity of this algorithm is within the bound of O(｜V｜^5)．     

Influence of Track Irregularity on Longitudinal Vibration of Wheelset and Correlation Performance

Introduction Greatattentionhasbeenfocusedonthelateral performanceofrailwayvehiclesforalongtimein ordertoachievehigherspeedandbettercomfort.But thelongitudinaldynamicperformancewasneglected exceptforthestudyontractionandbrakingperform ances.Sinceithasfewre…     

Formalization of a New Approach Fault Analysis and of Fault Detection

Substitution permutation network （SPN） is one important structure of block cipher cryptosystems. Pri or work has shown different fault analyses on SPN. The formalization of fault analysis of both attack and protect on SPN have been given. The overhead and time tolerance of fault detection have been discussed. The pseudoblinding method to detect fault attack is introduced, and the balance of the security, overhead and time tolerance based on the evaluation could be made.     

The Simulation and Characteristic Study of Wind Velocity for Long-Span Structures

The new technique that combines wave superposition with the fast Fourier transformation was introduced to simulate the nodal three-dimension relevant wind velocity time series of spatial structures. The wind velocity field where the spatial structure is located is assumed to be homogeneous. The wind‘s power spectral density is divided into frequency spectral function and coherency function and the spectral functions are transformed as the superposition coefficients. The wavelet analysis has excellent localized characters in both time and frequency domains, which not only makes wind velocity time series analysis more accurate, but also can focus on any detail of the objective signal series. The discrete wavelet transformation was adopted to decompose and reconstruct the discrete wind velocity time series. The stability of wavelet analysis for the wind velocity time series was also proved.     

Stylistic Analysis of an Extract from Pride and Prejudice

《傲慢与偏见》是一部以高超写作技巧写成的著名小说，在英国小说史上起着承上启下的作用。本文从文体分析的角度来评价它，希望与读者分享阅读所带来的乐趣。     

3D Nonlinear Numerical Simulation of Intact and Debonded Reinforced Concrete Beams

To study the behaviour of reinforced concrete (RC) structures with sections of concrete removed and the reinforcement exposed, 3D nonlinear numerical analysis was performed upon both intact and debonded RC beams by using finite element techniques. The deformational characteristics and the ultimate loads were obtained through numerical models, as well as crack and stress distributions. The failure modes can also be deduced from computational results. Compared with intact beams, the normal assumptions of plane section behaviour is not hold true and the patterns of stress and strain are different in debonded RC beams. The numerical results show good consistency with experimental data. This kind of numerical simulation is a supplement to existing codes.     

Finite Element Analysis of External Thermal Insulation Composite System： Thin Rendered Expanded Polystyrene Board

The finite element model of an external thermal composite insulation system, thin rendered expanded polystyrene (EPS) board, was built with ANSYS 1.0, which had two forms: one with window and one without window. The finite element analysis results show that the EPS board had very good insulation capacity at both high or low temperature, stress concentration was produced in the center of wall and around window, and the maximum deformation was observed at the edge of board and the minimum deformation was in the center.