Use of hybrid vehicles in Japan: An analysis of used car market data

Despite the rapid market penetration of hybrid vehicles (HVs), their usage and contributions to environmental protection have not been examined by vehicle traveling data. In this paper, we analyzed Japan’s used car market data to understand how HVs are used on the street. We find GV drivers with high travel demand switched from GVs to HVs during the transition period. Despite HV owners driving much longer distances than conventional gasoline vehicle (GV) owners, they emit less carbon dioxide (CO₂) emissions, owing to better fuel economy. We also find that HV owners spend roughly the same amount of money annually as GV owners. However, the per-kilometer travel cost of HVs is much lower than that of GVs even if the depreciation cost of the vehicle and vehicle related taxes are included in the analysis.     

Atmospheric Emissions from Shipping: The Need for Regulation and Approaches to Compliance

Shipping has traditionally been viewed as the least environmentally damaging mode of freight transport. Recent studies have increasingly questioned this perception, as attention has focused on both the greenhouse gas emissions (mainly CO₂) and the emission of health-damaging pollutants (such as sulphur, nitrogen oxides and particulates) by ships. This paper reviews the available evidence on the atmospheric emissions of shipping. It proposes that the profit objective has prompted the pursuit of greater fuel efficiency within the sector, but that reliance on market forces alone is insufficient to deliver on the environmental imperative. The paper outlines the current and planned regulatory regime for the atmospheric emissions from ships and posits that greater, and more diverse, market regulation is required. Alternative general approaches to regulatory compliance are categorised as ‘alternative sources of energy’ or ‘abatement technologies’ and the characteristics of a range of specific options are analysed. The paper concludes that although the shipping industry has been slow to improve its environmental credentials, a combination of regulation and technological innovation provides it with significant potential to dramatically reduce its environmental impact.     

A new statistical method of assigning vehicles to delivery areas for CO2 emissions reduction

Transportation CO₂ emissions are expected to increase in the following decades, and thus, new and better alternatives to reduce emissions are needed. Road transport emissions are explained by different factors, such as the type of vehicle, delivery operation and driving style. Because different cities may have conditions that are characterized by diversity in landforms, congestion, driving styles, etc., the importance of assigning the proper vehicle to serve a particular region within the city provides alternatives to reduce CO₂ emissions. In this article, we propose a new methodology that results in assigning trucks to deliver in areas such that the CO₂ emissions are minimized. Our methodology clusters the delivery areas based on the performance of the vehicle fleet by using the k-means algorithm and Tukey’s method. The output is then used to define the optimal CO₂ truck-area assignment. We illustrate the proposed approach for a parcel company that operates in Mexico City and demonstrate that it is a practical alternative to reduce transportation CO₂ emissions by matching vehicle type with delivery areas.     

Combining technology development and behaviour change to meet CO2 cumulative emission budgets for road transport: Case studies for the USA and Europe

Global temperature rise over the long term will be proportional to the total amount of CO₂ emitted. Any given probability of exceeding a targeted maximum temperature rise implies a maximum limit on the cumulative total of CO₂ that can be emitted: a CO₂ “budget”. This paper describes an approach to modelling cumulative emissions from light and heavy duty road transport from the present to 2050, focussing on the USA and Europe, and comparing the potential impacts of a range of technological and behaviourally-based abatement measures with such cumulative emissions budgets.The model shows that abatement measures would have a lower effect on cumulative emissions from 2000 to 2050 than on annual emissions in 2050, so that focussing only on annual emissions could be misleading. It shows that technological developments would be insufficient on their own to enable Europe and the USA to meet CO₂ budgets for road transport. Behavioural changes, which potentially can be implemented much sooner, would be essential too. There is potential to keep European light duty emissions very close to CO₂ budgets, and US light duty emissions not far above the least restrictive budget, but the model predicts that heavy duty emissions in both regions are likely to exceed their CO₂ budgets. Deeper emissions reductions in other regions and sectors will be needed to compensate for this. Timing would be critical: for the greatest impact, behaviour change policies and interventions would need to be applied early and deeply.     

Road transport and climate change: Stepping off the greenhouse gas

Transport is Australia’s third largest and second fastest growing source of greenhouse gas (GHG) emissions. The road transport sector makes up 88% of total transport emissions and the projected emissions increase from 1990 to 2020 is 64%. Achieving prospective emission reduction targets will pose major challenges for the road transport sector. This paper investigates two targets for reducing Australian road transport greenhouse gas emissions, and what they might mean for the sector: emissions in 2020 being 20% below 2000 levels; and emissions in 2050 being 80% below 2000 levels. Six ways in which emissions might be reduced to achieve these targets are considered. The analysis suggests that major behavioural and technological changes will be required to deliver significant emission reductions, with very substantial reductions in vehicle emission intensity being absolutely vital to making major inroads in road transport GHG emissions.     

Prediction of vehicle CO2 emission and its application to eco-routing navigation

Transportation sector accounts for a large proportion of global greenhouse gas and toxic pollutant emissions. Even though alternative fuel vehicles such as all-electric vehicles will be the best solution in the future, mitigating emissions by existing gasoline vehicles is an alternative countermeasure in the near term. The aim of this study is to predict the vehicle CO₂ emission per kilometer and determine an eco-friendly path that results in minimum CO₂ emissions while satisfying travel time budget. The vehicle CO₂ emission model is derived based on the theory of vehicle dynamics. Particularly, the difficult-to-measure variables are substituted by parameters to be estimated. The model parameters can be estimated by using the current probe vehicle systems. An eco-routing approach combining the weighting method and k-shortest path algorithm is developed to find the optimal path along the Pareto frontier. The vehicle CO₂ emission model and eco-routing approach are validated in a large-scale transportation network in Toyota city, Japan. The relative importance analysis indicates that the average speed has the largest impact on vehicle CO₂ emission. Specifically, the benefit trade-off between CO₂ emission reduction and the travel time buffer is discussed by carrying out sensitivity analysis in a network-wide scale. It is found that the average reduction in CO₂ emissions achieved by the eco-friendly path reaches a maximum of around 11% when the travel time buffer is set to around 10%.     

Should BEVs be subsidized or taxed? A European perspective based on the economic value of CO2 emissions

Battery Electric vehicles (BEVs) are generally considered as potentially contributing to the reduction of CO₂ emissions. Consequently, many countries have promoted (or are in the process of promoting) policies aimed at directly or indirectly subsidizing BEVs to accelerate their market uptake. The aim of this paper is to assess whether BEVs’ subsidies are justified (and by what amount) with reference to the carbon component, distinguishing by car segments and countries. To address these research questions, a simulation model is developed, based on the most recent and reliable data available. The model estimates and monetizes the Well-to-Wheel CO₂ emissions of six car segments in 28 European countries. The monetary value of the difference of the CO₂ emissions between the non-BEVs and the BEVs ranges from −€1133 (tax) to +€3192 (subsidy), depending on the car segment and on the nation considered. These results are then compared to the policies about alternative fuels adopted by the single EU countries, suggesting in some cases the necessity to rethink such incentives.     

Assessing the importance of transportation activity data for urban emission inventories

The aim of this research is the implementation of a GPS-based modelling approach for improving the characterization of vehicle speed spatial variation within urban areas, and a comparison of the resulting emissions with a widely used approach to emission inventory compiling. The ultimate goal of this study is to evaluate and understand the importance of activity data for improving the road transport emission inventory in urban areas. For this purpose, three numerical tools, namely, (i) the microsimulation traffic model (VISSIM); (ii) the mesoscopic emissions model (TREM); and (iii) the air quality model (URBAIR), were linked and applied to a medium-sized European city (Aveiro, Portugal). As an alternative, traffic emissions based on a widely used approach are calculated by assuming a vehicle speed value according to driving mode. The detailed GPS-based modelling approach results in lower total road traffic emissions for the urban area (7.9, 5.4, 4.6 and 3.2% of the total PM10, NO_x, CO and VOC daily emissions, respectively). Moreover, an important variation of emissions was observed for all pollutants when analysing the magnitude of the 5th and 95th percentile emission values for the entire urban area, ranging from −15 to 49% for CO, −14 to 31% for VOC, −19 to 46% for NO_x and −22 to 52% for PM10. The proposed GPS-based approach reveals the benefits of addressing the spatial and temporal variability of the vehicle speed within urban areas in comparison with vehicle speed data aggregated by a driving mode, demonstrating its usefulness in quantifying and reducing the uncertainty of road transport inventories.     

Environmental life-cycle assessment of transit buses with alternative fuel technology

The paper presents a life-cycle assessment of costs and greenhouse gas emissions for transit buses deploying a hybrid input-output model to compare ultra-low sulfur diesel to hybrid diesel-electric, compressed natural gas, and hydrogen fuel-cell. We estimate the costs of emissions reductions from alternative fuel vehicles over the life cycle and examine the sensitivity of the results to changes in fuel prices, passenger demand, and to technological characteristics influencing performance and emissions. We find that the alternative fuel buses reduce operating costs and emissions, but increase life-cycle costs. The infrastructure requirement to deploy and operate alternative fuel buses is critical in the comparison of life-cycle emissions. Additionally, efficient bus choice is sensitive to passenger demand, but only moderately sensitive to technological characteristics, and that the relative efficiency of compressed natural gas buses is more sensitive to changes in fuel prices than that of the other bus types.     

Individual exposure to traffic related air pollution across land-use clusters

In this study, we estimated the transportation-related emissions of nitrogen oxides (NO_x) at an individual level for a sample of the Montreal population. Using linear regression, we quantified the associations between NO_x emissions and selected individual attributes. We then investigated the relationship between individual emissions of NO_x and exposure to nitrogen dioxide (NO₂) concentrations derived from a land-use regression model. Factor analysis and clustering of land-uses were used to test the relationships between emissions and exposures in different Montreal areas. We observed that the emissions generated per individual are positively associated with vehicle ownership, gender, and employment status. We also noted that individuals who live in the suburbs or in peripheral areas generate higher emissions of NO_x but are exposed to lower NO₂ concentrations at home and throughout their daily activities. Finally, we observed that for most individuals, NO₂ exposures based on daily activity locations were often slightly more elevated than NO₂ concentrations at the home location. We estimated that between 20% and 45% of individuals experience a daily exposure that is largely different from the concentration at their home location. Our findings are relevant to the evaluation of equity in the generation of transport emissions and exposure to traffic-related air pollution. We also shed light on the effect of accounting for daily activities when estimating air pollution exposure.     

Air transportation in a carbon constrained world: Long-term dynamics of policies and strategies for mitigating the carbon footprint of commercial aviation

With increasing demand for air transportation worldwide and decreasing marginal fuel efficiency improvements, the contribution of aviation to climate change relative to other sectors is projected to increase in the future. As a result, growing public and political pressures are likely to further target air transportation to reduce its greenhouse gas emissions. The key challenges faced by policy makers and air transportation industry stakeholders is to reduce aviation greenhouse gas emissions while sustaining mobility for passengers and time-sensitive cargo as well as meeting future demand for air transportation in developing and emerging countries. This paper examines five generic policies for reducing the emissions of commercial aviation; (1) technological efficiency improvements, (2) operational efficiency improvements, (3) use of alternative fuels, (4) demand shift and (5) carbon pricing (i.e. market-based incentives). In order to evaluate the impacts of these policies on total emissions, air transport mobility, airfares and airline profitability, a system dynamics modeling approach was used. The Global Aviation Industry Dynamics (GAID) model captures the systemic interactions and the delayed feedbacks in the air transportation system and allows scenarios testing through simulations. For this analysis, a set of 34 scenarios with various levels of aggressiveness along the five generic policies were simulated and tested. It was found that no single policy can maintain emissions levels steady while increasing projected demand for air transportation. Simulation results suggest that a combination of the proposed policies does produce results that are close to a “weak” sustainability definition of increasing supply to meet new demand needs while maintaining constant or increasing slightly emissions levels. A combination of policies that includes aggressive levels of technological and operations efficiency improvements, use of biofuels along with moderate levels of carbon pricing and short-haul demand shifts efforts achieves a 140% increase in capacity in 2024 over 2004 while only increasing emissions by 20% over 2004. In addition, airline profitability is moderately impacted (10% reduction) compared to other scenarios where profitability is reduced by over 50% which pose a threat to necessary investments and the implementation of mitigating measures to reduce CO2 emissions. This study has shown that an approach based on a portfolio of mitigating measures and policies spanning across technology and operational improvements, use of biofuels, demand shift and carbon pricing is required to transition the air transportation industry close to an operating point of environmental and mobility sustainability.     

Prospects for plug-in hybrid electric vehicles in the United States and Japan: A general equilibrium analysis

The plug-in hybrid electric vehicle (PHEV) may offer a potential near term, low-carbon alternative to today’s gasoline- and diesel-powered vehicles. A representative vehicle technology that runs on electricity in addition to conventional fuels was introduced into the MIT Emissions Prediction and Policy Analysis (EPPA) model as a perfect substitute for internal combustion engine (ICE-only) vehicles in two likely early-adopting markets, the United States and Japan. We investigate the effect of relative vehicle cost and all-electric range on the timing of PHEV market entry in the presence and absence of an advanced cellulosic biofuels technology and a strong (450 ppm) economy-wide carbon constraint. Vehicle cost could be a significant barrier to PHEV entry unless fairly aggressive goals for reducing battery costs are met. If a low-cost PHEV is available we find that its adoption has the potential to reduce CO₂ emissions, refined oil demand, and under a carbon policy the required CO₂ price in both the United States and Japan. The emissions reduction potential of PHEV adoption depends on the carbon intensity of electric power generation. Thus, the technology is much more effective in reducing CO₂ emissions if adoption occurs under an economy-wide cap and trade system that also encourages low-carbon electricity generation.     

Analysis of the environmental benefits of a motorcycle idling stop policy at urban intersections

In an attempt to reduce CO₂ emissions from motorized transport, the Taiwanese government introduced an idling stop policy for vehicles in early 2007. This paper seeks to quantify the environmental benefits of the policy based on a stated preference analysis. Motorcyclists were surveyed at urban intersections in Taiwan, to identify the amount of time they would be willing to turn off their engines while waiting at traffic lights (the WTO). A contingent valuation framework based on stated preference questions was designed to determine the WTO. Results obtained from the Spike model showed that the average motorcyclist’s WTO is 82 s. In another analysis, in which other variables were taken into consideration, such as the possibility that the policy will be enacted as legislation, the expected WTO increased to 101 s. In both cases, an idling stop policy would have positive environmental effects, reducing gasoline usage by 1021 L per hour and reducing CO₂ emissions by 0.56 metric tons per hour at the intersection studied during peak periods.     

New car preferences move away from greater size,weight and power: Impact of Dutch consumer choices on average CO2-emissions

This paper assesses the separate effects of consumer preferences and technological advances on sales-weighted average CO₂ emissions of new passenger cars in the Netherlands. Since 2008, consumer preferences have been moving away from large size, weight and power whereby car buyers were offsetting more than 50% of the potential CO₂ reduction from technological advances. From 2008 to 2011 consumer choices not only ceased to offset a large share of the technological advances, but contributed more than an additional 30% to CO₂ reductions. Had consumer preferences not decoupled from the historical upward trend, the Dutch sales-weighted average CO₂ emissions of new passenger cars would have been 139 g/km rather than the 126 grams CO₂ per km in 2011.     

Low-carbon futures for Shenzhen’s urban passenger transport: A human-based approach

Shenzhen, one of China’s leading cities, has the potential to be a model for achieving China’s ambitious CO₂ emission reduction targets. Using data from a travel diary survey in Shenzhen in 2014, we develop a human-based agent model to conduct a scenario study of future urban passenger transport energy consumption and CO₂ emissions from 2014 to 2050. Responses to different policy interventions at the individual level are taken into account. We find that with current policies, the carbon emissions of the urban passenger transport sector in Shenzhen will continuously increase without a peak before 2050. Strengthening 21 transport policies will help Shenzhen to peak the carbon emissions by 2030 for passenger transport. Among these policies, the car quota policy and the fuel economy standard are essential for achieving a carbon peak by 2030. In addition, a package of seven policies, including fewer car quotas, a stricter fuel economy standard, raising parking fees, limiting parking supply, increasing EV charging facilities and subway lines, and improving public transport services, is sufficient to peak carbon emissions by 2030, although at an emissions level higher than for the 21 policies.     

Greenhouse gas emissions from ships in ports – Case studies in four continents

Emissions of GHG from the transport sector and how to reduce them are major challenges for policy makers. The purpose of this paper is to analyse the level of greenhouse gas (GHG) emissions from ships while in port based on annual data from Port of Gothenburg, Port of Long Beach, Port of Osaka and Sydney Ports. Port call statistics including IMO number, ship name, berth number and time spent at berth for each ship call, were provided by each participating port. The IMO numbers were used to match each port call to ship specifications from the IHS database Sea-web. All data were analysed with a model developed by the IVL Swedish Environmental Research Institute for the purpose of quantifying GHG emissions (as CO₂-equivalent) from ships in the port area. Emissions from five operational modes are summed in order to account for ship operations in the different traffic areas. The model estimates total GHG emissions of 150,000, 240,000, 97,000, and 95,000 tonnes CO₂ equivalents per year for Gothenburg, Long Beach, Osaka, and Sydney, respectively. Four important emission-reduction measures are discussed: reduced speed in fairway channels, on-shore power supply, reduced turnaround time at berth and alternative fuels. It is argued that the potential to reduce emissions in a port area depends on how often a ship revisits a port: there it in general is easier to implement measures for high-frequent liners. Ships that call 10 times or less contribute significantly to emissions in all ports.     

Can regional transportation and land-use planning achieve deep reductions in GHG emissions from vehicles?

The Intergovernmental Panel on Climate Change estimates that greenhouse gas emissions (GHG) must be cut 40–70% by 2050 to prevent a greater than 2 °Celsius increase in the global mean temperature; a threshold that may avoid the most severe climate change impacts. Transportation accounts for about one third of GHG emissions in the United States; reducing these emissions should therefore be an important part of any strategy aimed at meeting the IPCC targets. Prior studies find that improvements in vehicle energy efficiency or decarbonization of the transportation fuel supply would be required for the transportation sector to achieve the IPCC targets. Strategies that could be implemented by regional transportation planning organizations are generally found to have only a modest GHG reduction potential. In this study we challenge these findings. We evaluate what it would take to achieve deep GHG emission reductions from transportation without advances in vehicle energy efficiency and fuel decarbonization beyond what is currently expected under existing regulations and market expectations. We find, based on modeling conducted in the Albuquerque, New Mexico metropolitan area that it is possible to achieve deep reductions that may be able to achieve the IPCC targets. Achieving deep reductions requires changes in transportation policy and land-use planning that go far beyond what is currently planned in Albuquerque and likely anywhere else in the United States.     

Development of a corrected average speed model for calculating carbon dioxide emissions per link unit on urban roads

The purpose of our study is to develop a “corrected average emission model,” i.e., an improved average speed model that accurately calculates CO₂ emissions on the road. When emissions from the central roads of a city are calculated, the existing average speed model only reflects the driving behavior of a vehicle that accelerates and decelerates due to signals and traffic. Therefore, we verified the accuracy of the average speed model, analyzed the causes of errors based on the instantaneous model utilizing second-by-second data from driving in a city center, and then developed a corrected model that can improve the accuracy. We collected GPS data from probe vehicles, and calculated and analyzed the average emissions and instantaneous emissions per link unit. Our results showed that the average speed model underestimated CO₂ emissions with an increase in acceleration and idle time for a speed range of 20 km/h and below, which is the speed range for traffic congestion. Based on these results, we analyzed the relationship between average emissions and instantaneous emissions according to the average speed per link unit, and we developed a model that performed better with an improved accuracy of calculated CO₂ emissions for 20 km/h and below.     

Will technological progress be sufficient to stabilize CO2 emissions from air transport in the mid-term?

This article investigates whether anticipated technological progress can be expected to offset the CO₂ emissions resulting from rapid air traffic growth. Global aviation CO₂ emissions projections are examined for eight geographical zones until 2025. Air traffic flows are forecast using a dynamic panel-data econometric model, and then converted into corresponding quantities of air traffic CO₂ emissions using specific hypotheses and energy factors. None of our nine scenarios appears compatible with the objective of 450 ppm CO₂-eq. recommended by the Intergovernmental Panel on Climate Change. Nor is any compatible with the Panel’s aim of limiting global warming to 3.2 °C.     

Impacts of freeway accidents on CO2 emissions: A case study for Orange County,California, US

Traffic congestion caused by traffic accidents contributes to CO₂ emissions. Generally, more efficient and prompt responses to accidents lead to reduced traffic congestion as well as CO₂ emissions. Here we assess the CO₂ emissions impacts of freeway accidents, applies an existing model to capture spatio-temporally congested regions caused by freeway accidents. A case study for the assessment of CO₂ emissions impacts of based on the results from the model is presented.