用于海底ROV在强流干扰下的一种自适应防走滑装置（英文）

This paper proposed a new concept of an adaptable multi-legged skid design for retro-fitting to a remotely-operated vehicle(ROV) during high tidal current underwater pipeline inspection. The sole reliance on propeller-driven propulsion for ROV is replaced with a proposed low cost biomimetic solution in the form of an attachable hexapod walking skid. The advantage of this adaptable walking skid is the high stability in positioning and endurances to strong current on the seabed environment. The computer simulation flow studies using Solidworks Flow Simulation shown that the skid attachment in different compensation postures caused at least four times increase in overall drag, and negative lift forces on the seabed ROV to achieve a better maneuvering and station keeping under the high current condition(from 0.5 m/s to 5.0 m/s). A graphical user interface is designed to interact with the user during robot-in-the-loop testing and kinematics simulation in the pool.     

"海马"号无人遥控潜水器

本文介绍了自主研发、国产化率90%、工作深度达4500 m的"海马"号无人遥控潜水器.首先介绍ROV作业系统构成,描述ROV总体设计,提出核心框架的设计理念,对ROV的电子控制系统进行说明和分析.最后,重点介绍自主研发的ROV控制系统软件,并对该软件的特点进行阐述.自主研发的深海作业型ROV"海马"号,实现关键技术国产化,在海洋科学研究、海底资源调查、水下油气工程、深海救助打捞以及水下军事领域等方面具有重要的价值和战略意义.     

Influence of seabed trench formation on fatigue performance of steel catenary risers in touchdown zone

The subsea survey results using remote operating vehicles (ROV) show that trenches with a depth of several riser diameters can be developed underneath the steel catenary risers (SCR). Therefore, an important question in respect of the riser–seabed interaction is, how the trench formation beneath the riser affects the riser fatigue performance in the touchdown zone. A common methodology reported in literature to study the impact of trench formation on riser fatigue life is the insertion of an artificial mathematical expression of the riser profile into the seabed. This study shows that such methodology can be inconsistent and leading to contradictory results. The current paper has employed ABAQUS finite element software and coded a non-linear soil hysteretic model to automatically simulate the variable seabed stiffness and the gradual trench development through the touchdown zone. In this method, the seabed model parameters are initially adjusted to extreme values allowing trench with desired depth to be developed over a moderate number of displacement cycles of the SCR. The design wave scatter diagram is then applied, simulating a generic Spar system, after switching the model parameters to values with normal range. The paper presents the impact of trenches of different depths on the fatigue performance of SCRs in the touchdown zone.     

海底冲射式开沟机技术进展

总结已有的冲射式开沟机,包括冲射式开沟滑撬、自推进爬行开沟机、开沟型ROV和非接触式控流开沟机的技术特点,认为冲射式开沟滑撬技术门槛和成本较低,适合在近海浅水区域作业,而自推进爬行开沟机和开沟型ROV则适合深水区的开沟作业,非接触式控流开沟机适应性最广,几乎可以在所有水深和除基岩外的所有地质状况下工作。新型海底开沟机将向着智能化、大型化、宽适应性和高效率几个发展方向。     

基于OpenGL的深海开架式潜水器视景仿真设计

采用虚拟仿真技术,以正在研发的深海开架式潜水器的设计尺寸和数字海底理论为基础,采用基于面向对象数据模型和基于表面三角剖分的方法来构建水下目标的三维空间数据模型。以三角形的空间拓扑关系为基础,利用SolidWorks建模工具和VC++OpenGL图形开发库,实现了深海虚拟环境下的系统仿真。通过水下目标的建模实例,验证了仿真平台的正确性和可行性,该平台还可应用于深海综合调查研究、水下机器人操纵运动控制仿真等领域。     

ROV attitude control based on multi-motor cooperative propulsion北大核心CSCD

[目的]为了提高遥控水下航行器(ROV)在复杂水下环境中的姿态控制性能,开展多电机协同推进的ROV姿态控制研究。[方法]首先,针对多电机系统的结构和算法,分别提出一种基于PID速度补偿器的偏差耦合结构和一种新型非奇异终端滑模控制(SMC)算法,并设计一种新颖的基于多电机协同推进的ROV姿态控制方法;然后,建立ROV的运动学和动力学模型,开展推进器组推力建模分析、解耦简化ROV动力学模型研究;最后,设计一种ROV滑模姿态控制器。[结果]仿真结果表明,所提的结构和算法可提高多电机系统的抗干扰性、同步性和快速响应能力,进而提高ROV姿态控制系统的稳定性与鲁棒性。[结论]所提方法可为ROV姿态控制提供一种新的可用方案。     

复杂形体远程操控水下运载器水动力阻尼模型建模和检验(英文)

In this paper,numerical modeling and model testing of a complex-shaped remotely-operated vehicle(ROV) were shown.The paper emphasized the systematic modeling of hydrodynamic damping using the computational fluid dynamic software ANSYS-CFXTM on the complex-shaped ROV,a practice that is not commonly applied.For initial design and prototype testing during the developmental stage,small-scale testing using a free-decaying experiment was used to verify the theoretical models obtained from ANSYS-CFXTM.Simulation results are shown to coincide with the experimental tests.The proposed method could determine the hydrodynamic damping coefficients of the ROV.     

海底障碍物探测技术

从障碍物探测的方法原理、基本状况、应用实例效果等方面分析目前国内外常用的海底障碍物探测技术方法,探讨各种方法的优缺点及适用条件,总结海底障碍物探测现状及发展趋势。     

Efficient methods to mitigate SCR-induced walking of short subsea flowlines

Steel catenary riser is a long-established option for subsea projects in deep-water regions. Sustained pulling force of steel catenary risers on subsea flowlines in combination with cyclic thermal load throughout the system lifetime may lead to progressive global axial displacement of subsea pipelines which has been termed as ‘walking’. One of the challenges in the deep-water industry is long-term walking of subsea flowlines in a cumulative manner. Common practice methods for walking mitigation are quite expensive operations. State-of-the-art mitigation strategies are proposed in the paper by means of modifying pipe pieces before the installation operation. Bowed pipe pieces and miter joints are two recommended approaches for walking mitigation. The presented mitigation strategies are relatively cost-effective solutions for the pipe-walking challenge and they are able to considerably cease the potential cyclic walking. Comprehensive FE analyses in ABAQUS software are performed to evaluate the proposed deformed pipelines response subject to two loading conditions. Through-life integrity of the suggested pre-deformed pipeline is assessed in terms of effective axial force, local buckles and excessive axial strains. A comparison of the presented method with conventional techniques shows the effectiveness of the proposed configuration. The proposed methods can significantly reduce effective axial force throughout the subsea pipeline by means of artificially introduced deformations. The cumulative walking of the presented method is practically zero. In addition, the influence of combined triggering mechanisms to the walking phenomenon is assessed when the pipeline is located on a sloping seabed and it is subject to non-uniform thermal loads. A parametric study is performed to improve confidence in design and provide a reasonably practical technique with an optimal shape.     

Research on the pipeline walking caused by cyclic increasing soil friction for free deep-sea submarine pipelines laid on even seabed

Pipelines are important to offshore oil and gas development, but suffers from the pipeline walking phenomenon due to cyclic temperature variations—where large axial walking distances threaten the safety of pipeline systems. Current research indicates that pipeline walking is triggered by steel catenary riser (SCR) tension, seabed slopes, or thermal transients. This paper proposes a new driving mechanism for the pipeline walking phenomenon, involving cyclic hardening soil strength. The finite element analysis method was adopted to analyse the soil friction difference induced walking phenomenon, and the influence of key parameters on the gain in soil friction on walking distance was studied. Pipeline walking distances under different drainage conditions in the heating and cooling processes were also calculated, and the impact of the degree of drainage in the heating process was determined. To better understand the new pipeline walking mechanism, theoretical analysis of the walking behaviour under different cyclic soil friction conditions was carried out. Analytical solutions for estimating the pipeline walking distance were also provided, based on the simplified theoretical analysis.     

基于参数扰动模型的遥控潜水器滑模控制方法

[目的]遥控潜水器(ROV)的运动控制易受到环境和模型参数不确定性因素的影响,难以达到预期控制效果,针对此情况,提出一种基于参数扰动模型的ROV滑模控制方法.[方法]以标准ROV模型为基础,将环境干扰与模型自身参数的不确定性作为模型扰动参数,建立带参数扰动的ROV模型,并对模型进行解耦得到深度方向的控制模型,基于带参数...     

无模型自适应控制算法在ROV定深控制中的仿真

将无模型自适应控制方法应用于ROV(Remote Operated Vehicle)定深控制当中。该控制方案的设计仅利用ROV的垂向推力输入数据和深度输出数据，用动态线性化时变模型替代ROV非线性系统模型，算法中不包含ROV模型及水动力参数信息。因此，解决了ROV因系统复杂，水动力参数难以确定所导致的控制器设计复杂度高，控制效果不理想的问题。为了便于仿真，本文建立含有补偿参数的ROV简化模型，模型仅用于产生系统的I/O数据，不参与控制器的设计。仿真结果表明，在ROV定深控制当中，无模型自适应控制(Model-free adaptive control，MFAC)比PID控制具有更强的抗扰能力。此外，在欠阻尼ROV系统中，基于偏格式动态线性化的无模型自适应控制(partial form dynamic linearization based Model-free adaptive control，PFDL-MFAC)方案相比于基于紧格式动态线性化的无模型自适应控制(compact form dynamic linearization based Model-free adaptive control，CFDL-MFAC)方案具有更好的控制效果。     

多岛屿、多汊道环境下大型深水港建设中的水沙问题

洋山港海域多岛屿、多汊道,是由大、小洋山两条岛链围成的喇叭口型的海域,潮汐水道以落潮流为主、高含沙量、强潮流,泥沙运动主要以悬沙为主。通道内潮流基本为东南-西北向往复流,潮流平均流速在1.0 m/s,最大流速都在2.0 m/s以上,含沙量在1.0 kg/m3以上。根据其海域边界特点,利用任意三角形网格建立了能较好拟合洋山港海域边界的二维潮流泥沙及地形冲淤变化数学模型。应用2006年4月实测水文泥沙及地形冲淤资料进行了验证,验证结果表明,该海域潮位及定点同步垂线流速、流向、含沙量过程的计算值与实测值吻合良好,洋山港海域通道内地形冲淤变化情况和实测值接近,较好地复演了洋山港一、二期工程建设后海域流场、含沙量场和地形变化。     

水下机器人动力定位模糊逻辑控制的虚拟现实仿真（英文）

In this paper, graphical-user-interface(GUI) software for simulation and fuzzy-logic control of a remotely operated vehicle(ROV) using MATLAB TM GUI Designing Environment is proposed. The proposed ROV’s GUI platform allows the controller such as fuzzy-logic control systems design to be compared with other controllers such as proportional-integral-derivative(PID) and sliding-mode controller(SMC) systematically and interactively. External disturbance such as sea current can be added to improve the modelling in actual underwater environment. The simulated results showed the position responses of the fuzzy-logic control exhibit reasonable performance under the sea current disturbance.     

开架式ROV动力匹配稳态与动态设计方法

本文针对开架式ROV的设计,提出一种将稳态匹配与动态匹配相结合的动力匹配研究方法。首先根据所设计的ROV,运用Fluent软件对其进行水阻力仿真,得出ROV在不同航速下的阻力,其次对螺旋桨进行特性分析,进而对比螺旋桨不同参数对推力和阻力匹配的影响,同时考虑螺旋桨功率与电机功率匹配,完成ROV的稳态匹配。最后加入动态分析得到最终的动力匹配,并证明其具有较好的运动稳定性以及机动性。     

Influence of seabed sand wave on hydrodynamic performance of submersible北大核心CSCD

[目的]研究潜器在海底沙波地形干扰下的水动力特性。[方法]基于计算流体力学(CFD)方法,使用STAR-CCM+软件并结合重叠网格方法对潜器经过海底沙波的过程进行模拟,计算潜器阻力系数和升力系数在此过程中的变化。[结果]结果表明,当潜器近海底航行时,沙波地形会对潜器产生一定的干扰,当艏部运动至波峰附近时,负升力出现最大值,当艉部运动至波峰附近时,阻力出现最大值;在不同航速下,潜器表面压力分布规律的不同会导致升力系数的变化规律不同;随着近海底距离的减小,海底沙波对潜器阻力和升力变化影响显著,当H/D>5时,海底沙波对潜器阻力和升力的影响可以忽略。[结论]所做研究可为潜器的安全及操纵性能提供一定的参考。     

温州状元岙化工码头工程潮流泥沙数模研究

采用水动力泥沙条件、底床冲淤演变分析及二维潮流泥沙数值模拟手段,对拟建的温州港状元岙港区化工码头工程方案进行了研究。研究结果表明:(1)工程海区潮汐属于正规半日潮类型,为强潮海区;(2)工程海区潮流性质属于不规则半日浅海潮流,潮流运动呈往复流形式;(3)工程海域深槽多年来在波浪潮流作用下一直处于稳定状态;(4)规划的化工码头走向与涨落潮流走向基本一致;(5)规划的化工码头实施后工程附近海区的涨落潮流速呈增加趋势,码头前沿会略有冲刷;(6)化工码头建设对锚地流场没有影响;(7)化工码头工程方案是合理可行的。     

基于管道极限承载能力分析的深水S型铺管托管架基本设计研究

S型铺管托管架是铺管系统中的重要装备,起到支撑管道和引导管道入水的作用。其基本设计流程是一个复杂的循环过程,涉及铺管船推进力、张紧器张力、待铺设管道的尺寸和铺设水深等诸多参数的平衡和优选。本文基于下弯段管道在弯曲、拉伸和外压综合荷载作用下的极限承载能力分析,求解了铺管船推进力和张紧器拉力,并以此为边界条件推导了托管架长度的参数公式。以2500米水深铺设12英寸管道为例计算了所需的托管架曲率半径和设计长度,该计算方法可为S型铺管船托管架的基本设计提供参考。     

潜器母船动力定位自动控制系统

该文介绍了我国第一搜遥控潜器（ROV）母船动力定位自动控制系统组成、工作方式、性能及动力定位试验结果。该系统根据ROV的作业要求实现工作母船定向航行、动力定位及自动跟踪ROV,可直观、形象地显示工作母船和ROV运动信息、人机界面友好。     

一种小型潜器模型参数估计方法与实验研究

潜器的位置控制性能对深海采矿取样过程有很大影响.本文针对小型潜器位置控制的需要,研究其动态模型参数辨识方法.以机械能守恒定理为基础,讨论了机械能增量在正交坐标下的分配量与外力作功的能量转换关系.利用这一关系与最小二乘法,以潜器纵向运动动态灰箱模型参数估计为例,建立了基于能量转换的潜器模型参数估计方程,并开展了实验研究.将海洋水下工程手册经验公式的计算结果与实验结果对比,验证了本方法的有效性.本方法物理意义明显,适用于作机械运动的线性与非线性系统辨识.