Well-to-wheel costs,primary energy demand,and greenhouse gas emissions for the production and operation of conventional and alternative vehicles

This study provides a comprehensive comparison of well-to-wheel (WTW) energy demand, WTW GHG emissions, and costs for conventional ICE and alternative passenger car powertrains, including full electric, hybrid, and fuel cell powertrains. Vehicle production, operation, maintenance, and disposal are considered, along with a range of hydrogen production processes, electricity mixes, ICE fuels, and battery types. Results are determined based on a reference vehicle, powertrain efficiencies, life cycle inventory data, and cost estimations. Powertrain performance is measured against a gasoline ICE vehicle. Energy carrier and battery production are found to be the largest contributors to WTW energy demand, GHG emissions, and costs; however, electric powertrain performance is highly sensitive to battery specific energy. ICE and full hybrid vehicles using alternative fuels to gasoline, and fuel cell vehicles using natural gas hydrogen production pathways, are the only powertrains which demonstrate reductions in all three evaluation categories simultaneously (i.e., WTW energy demand, emissions, and costs). Overall, however, WTW emission reductions depend more on the energy carrier production pathway than on the powertrain; hence, alternative energy carriers to gasoline for an ICE-based fleet (including hybrids) should be emphasized from a policy perspective in the short-term. This will ease the transition towards a low-emission fleet in Switzerland.     

An econometric model of vehicle use in the household sector

Vehicle-use modelling at the household level has taken on new importance with the pressures on governments to encourage more efficient utilisation of increasingly scarce nonreplenishible liquid fuels. The fundamental energy equation recognizes two direct influences on consumption—the fuel efficiency of the vehicle and the amount of use. Until recently, the interrelationship between vehicle choice and vehicle utilisation at the household level was acknowledged but ignored. The availability of reliable vehicle-use data at the household level now enables a more serious effort at amending the imbalance of research effort where the reliance has been predominantly on vehicle choice modelling and gross (exogenous) assumptions on utilisation as a basis for predicting fuel consumption. This paper proposes an econometric method for identifying the influences on household vehicle use. It differs from previous empirical work in that vehicle kilometers, fuel cost per kilometer and vehicle fuel efficiency are endogenous, with utilisation of each vehicle endogeneously dependent on the utilisation of each and every household vehicle. The data are drawn from wave 1 of a four-wave panel of 1436 households in the Sydney metropolitan area. The empirical findings expose a set of influences on use hitherto not considered. The model specification provides an appropriate module for integration with household-based discrete choice models of vehicle choice.     

A parametric study of the energy demands of car transportation: a case study of two competing commuter routes in the UK

This paper presents a parametric study of the energy demands of car transportation on two competing inter-city commuter routes in the UK for all main categories of automotive vehicles. The commuter routes are between Bristol and Bath: one is fast and flat, the other is relatively hilly and with tighter speed restrictions. Energy demands were found to be closely related to the vehicle mass because almost all external forces on the car are either directly or indirectly influenced by the mass of the vehicle. Exposure to the wind was found to be an important parameter that can significantly affect fuel consumption. Reducing vehicle mass is an important way of improving the performance of the car. However, there are limits to what can be achieved in weight reduction because of safety requirements and the desire of car owners to have many luxury items in modern cars. The official European fuel consumption and emissions test is limited in the extent to which it measures parameters that affect fuel consumption. For example, the test does not measure the frontal area or drag coefficient of the car. The design of the route and traffic operation can have a very significant influence on the efficiency of car transportation and therefore it is necessary to consider route design in whole-life analysis.     

Eco-driving: An economic or ecologic driving style?

In this work the trade-off between economic, therefore fuel saving, and ecologic, pollutant emission reducing, driving is discussed. The term eco-driving is often used to refer to a vehicle operation that minimizes energy consumption. However, for eco-driving to be environmentally friendly not only fuel consumption but also pollutant emissions should be considered. In contrast to previous studies, this paper will discuss the advantages of eco-driving with respect to improvements in fuel consumption as well as pollutant gas emissions. Simulating a conventional passenger vehicle and applying numerical trajectory optimization methods best vehicle operation for a given trip is identified. With hardware-in-the-loop testing on an engine test bench the fuel and emissions are measured. An approach to integrate pollutant emission and dynamically choose the ecologically optimal gear is proposed.     

Well-to-wheel analysis for electric, diesel and hydrogen traction for railways

This paper derives the energy efficiencies and CO₂ emissions for electric, diesel and hydrogen traction for railway vehicles on a well-to-wheel basis, using the low heating value and high heating value of the enthalpy of oxidation of the fuel. The tank-to-wheel and well-to-tank efficiency are determined. Gaseous hydrogen has a WTW efficiency of 25% low heating value, if produced from methane and used in a fuel cell. This efficiency is similar to diesel and electric traction in the UK, US, and California. A reduction of about 19% in CO₂ is achieved when hydrogen gas is used in a fuel cell compared to diesel traction, and a 3% reduction compared to US electricity.     

Eco-efficiency management program (EEMP)—a model for road fleet operation

Fuel consumption has always been a matter of economic concern in road fleet management, giving rise to many initiatives aimed at fostering more efficient energy use. The increasingly awareness of environmental problems now requires these programs to include environmental aspects. A structured Eco-efficiency Management Program (EEMP) is proposed for road fleet operation, taking into account the traditional approach that strives to minimise fuel consumption as well as wider economic and environmental aspects. The EEMP has its potential evaluated in a case study undertaken for INFRAERO, Brazilian’s airport authority, on the operation of its road fleet supporting aircraft ground operations at Rio de Janeiro International Airport. The paper looks at EEMP’s implementation by identifying the program’s phases, its participants and their competencies, eco-efficiency indicators, and performance targets.     

Fuel consumption model for bus rapid transit

Transportation planners and policy analysts require, for scenario testing, a detailed fuel consumption model of public transit operating in multimodal corridors. Although much effort has been devoted to the development of detailed methodology for estimating fuel consumption of automobile travel on freeways and arterials, the same is not the case for public transit. This paper presents methodology for the estimation of fuel consumption for bus operation on transitways/busways serving major travel corridors. Bus fuel consumption model is reported for standard and articulated buses. This model was adapted from an existing heavy vehicle fuel use model by incorporating the transitway design and bus operational characteristics.     

Experimental testing and simulations of speed variations impact on fuel consumption of conventional gasoline passenger cars

Speed variations are considered as an alternative for reducing fuel consumption during the use phase of passenger cars. It explores vehicle engine operating zones with lower fuel consumption, thus making possible a reduction in fuel consumption when compared to constant speed operation. In this paper, we present an evaluation of two conditions of speed variations: 50–70 km/h and 90–110 km/h using numerical simulations and controlled tests. The controlled tests performed on a test track by a professional pilot show that a reduction in fuel consumption is achievable with a conventional gasoline passenger car, with no adaptations for realizing speed variations. Numerical simulations based on a backward quasi-static powertrain model are used to evaluate the potential of speed variations for reducing fuel consumption in other speed variation conditions. When deceleration is performed with gear in neutral position, simulations show that speed variations are always correlated to a lower fuel consumption. This was suspected through previous numerical tests or evaluation on test bench but not in controlled tests conditions.     

Assessing additional fuel consumption from cabin thermal comfort and auxiliary needs on the worldwide harmonized light vehicles test cycle

Standards for fuel consumption and carbon dioxide emissions are implemented worldwide in most light-duty vehicle markets. Regulatory drive cycles, defined as specific time-speed patterns, are used to measure levels of fuel consumption and emissions. These measurements should realistically reflect real world driving performance, however there is increasing concern about their adequacy due to the discrepancies observed between certified and real world consumption and emissions values. One of the main reasons for the discrepancy is that current testing protocols do not account for non-mechanical vehicle energy needs, such as passengers’ thermal comfort needs and the use of electric auxiliaries on-board. Cabin heating and cooling can especially lead to considerable increase in vehicle energy consumption. This paper presents a simulation-based assessment framework to account for the additional fuel consumption related to the cabin thermal energy and auxiliary needs under the worldwide-harmonized light vehicles test procedure (WLTP). A vehicle cabin model is developed and the thermal comfort energy needs are derived for cooling and heating, depending on ambient external temperature under cold, moderate and warm climates. A modification to the WLTP is proposed by including the generated power profiles for thermal comfort and auxiliary needs. Dynamic programming is used to compute the fuel consumption on the modified WLTP for a rechargeable series hybrid electric vehicle (SHEV) architecture. Results show consumption increases of 20% to 96% compared to the currently adopted WLTP, depending on the considered climate.     

Life cycle model of alternative fuel vehicles: emissions,energy, and cost trade-offs

This paper describes a life cycle model for performing level-playing field comparisons of the emissions, costs, and energy efficiency trade-offs of alternative fuel vehicles (AFV) through the fuel production chain and over a vehicle lifetime. The model is an improvement over previous models because it includes the full life cycle of the fuels and vehicles, free of the distorting effects of taxes or differential incentives. This spreadsheet model permits rapid analyses of scenarios in plots of trade-off curves or efficiency frontiers, for a wide range of alternatives with current and future prices and levels of technology. The model is available on request.The analyses indicate that reformulated gasoline (RFG) currently has the best overall performance for its low cost, and should be the priority alternative fuel for polluted regions. Liquid fuels based on natural gas, M100 or M85, may be the next option by providing good overall performance at low cost and easy compatibility with mainstream fuel distribution systems. Longer term, electric drive vehicles using liquid hydrocarbons in fuel cells may offer large emissions and energy savings at a competitive cost. Natural gas and battery electric vehicles may prove economically feasible at reducing emissions and petroleum consumption in niches determined by the unique characteristics of those systems.     

Analysis of energy consumption of food transit in an urban agglomeration in Poland

The paper presents the results of research on operational energy consumption of a vehicle in conditions of urban transit in Poland. An important role in Intelligent Transportation Systems in the road transport is played by transit in urban agglomerations. The analysis was based on the use of telemetry systems and statistical analysis of the waveform of digital speed recording. The resulting empirical cumulative distribution functions of phases of acceleration and deceleration speeds allowed to determine the kinetic losses of the vehicle (fuel consumption). The statistical significance of differences between cumulative distribution functions was tested using the Smirnov–Kolmogorov test.     

Fuel economy of hybrid-electric versus conventional gasoline vehicles in real-world conditions: A case study of cold cities in Quebec,Canada

This paper investigates the fuel efficiency of commercial hybrid electric vehicles (HEVs) and compares their performance with respect to standard gasoline vehicles in the context of cold Canadian urban environments. The effect of different factors on fuel efficiency is studied including road driving conditions (link type, city size), temperature, speed, cold-starts and eco-driving training. For this study, fuel consumption data at the link level in real-world conditions was used from a sample of 74 instrumented vehicles. From the study fleet, 21 vehicles were HEVs. Among other results, the beneficial fuel efficiency merits of hybrid vehicles were demonstrated with respect to gasoline cars, in particular at low speeds and in urban (city) environments. After controlling for other factors, sedan HEVs were 28% more efficient than sedan gasoline vehicles. However, the low temperatures (below 0 °C) observed regularly during winter season in the study cities were identified as a detrimental factor to fuel economy. In winter, the fuel efficiency of HEVs decrease about 20% with respect to summer. Other factors such as eco-driving training, city size, cold start and vehicle type were also found to be statistically significant.     

A new offline optimization approach for designing a fuel cell hybrid bus

In this study a hydrogen powered fuel cell hybrid bus is optimized in terms of the powertrain components and in terms of the energy management strategy. Firstly the vehicle is optimized aiming to minimize the cost of its powertrain components, in an official driving cycle. The optimization variables in powertrain component design are different models and sizes of fuel cells, of electric motors and controllers, and batteries. After the component design, an energy management strategy (EMS) optimization is performed in the official driving cycle and in two real measured driving cycles, aiming to minimize the fuel consumption. The EMS optimization is based on the control of the battery’s state-of-charge. The real driving cycles are representative of bus driving in urban routes within Lisbon and Oporto Portuguese cities. A real-coded genetic algorithm is developed to perform the optimization, and linked with the vehicle simulation software ADVISOR. The trade-off between cost increase and fuel consumption reduction is discussed in the lifetime of the designed bus and compared to a conventional diesel bus. Although the cost of the optimized hybrid powertrain (62,230 €) achieves 9 times the cost of a conventional diesel bus, the improved efficiency of such powertrain achieved 36% and 34% of lower energy consumption for the real driving cycles, OportoDC and LisbonDC, which can originate savings of around 0.43 €/km and 0.37 €/km respectively. The optimization methodology presented in this work, aside being an offline method, demonstrated great improvements in performance and energy consumption in real driving cycles, and can be a great advantage in the design of a hybrid vehicle.     

Transport energy consumption in mountainous roads. A comparative case study for internal combustion engines and electric vehicles in Andorra

This paper analyses transport energy consumption of conventional and electric vehicles in mountainous roads. A standard round trip in Andorra has been modelled in order to characterise vehicle dynamics in hilly regions. Two conventional diesel vehicles and their electric-equivalent models have been simulated and their performances have been compared. Six scenarios have been simulated to study the effects of factors such as orography, traffic congestion and driving style. The European fuel consumption and emissions test and Artemis urban driving cycles, representative of European driving cycles, have also been included in the comparative analysis. The results show that road grade has a major impact on fuel economy, although it affects consumption in different levels depending on the technology analysed. Electric vehicles are less affected by this factor as opposed to conventional vehicles, increasing the potential energy savings in a hypothetical electrification of the car fleet. However, electric vehicle range in mountainous terrains is lower compared to that estimated by manufacturers, a fact that could adversely affect a massive adoption of electric cars in the short term.     

Development a new power management strategy for power split hybrid electric vehicles

Reduction of greenhouse gas emission and fuel consumption as one of the main goals of automotive industry leading to the development hybrid vehicles. The objective of this paper is to investigate the energy management system and control strategies effect on fuel consumption, air pollution and performance of hybrid vehicles in various driving cycles. In order to simulate the hybrid vehicle, the combined feedback–feedforward architecture of the power-split hybrid electric vehicle based on Toyota Prius configuration is modeled, together with necessary dynamic features of subsystem or components in ADVISOR. Multi input fuzzy logic controller developed for energy management controller to improve the fuel economy of a power-split hybrid electric vehicle with contrast to conventional Toyota Prius Hybrid rule-based controller. Then, effects of battery’s initial state of charge, driving cycles and road grade investigated on hybrid vehicle performance to evaluate fuel consumption and pollution emissions. The simulation results represent the effectiveness and applicability of the proposed control strategy. Also, results indicate that proposed controller is reduced fuel consumption in real and modal driving cycles about 21% and 6% respectively.     

Multi-criteria analysis of optimal signal plans using microscopic traffic models

Increasing concerns on environment and natural resources, coupled with increasing demand for transport, put lots of pressure for improved efficiency and performance on transport systems worldwide. New technology nowadays enables fast innovation in transport, but it is the policy for deployment and operation with a systems perspective that often determines success. Smart traffic management has played important roles for continuous development of traffic systems especially in urban areas. There is, however, still lack of effort in current traffic management and planning practice prioritizing policy goals in environment and energy. This paper presents an application of a model-based framework to quantify environmental impacts and fuel efficiency of road traffic, and to evaluate optimal signal plans with respect not only to traffic mobility performance but also other important measures for sustainability. Microscopic traffic simulator is integrated with micro-scale emission model for estimation of emissions and fuel consumption at high resolution. A stochastic optimization engine is implemented to facilitate optimal signal planning for different policy goals, including delay, stop-and-goes, fuel economy etc. In order to enhance the validity of the modeling framework, both traffic and emission models are fine-tuned using data collected in a Chinese city. In addition, two microscopic traffic models are applied, and lead to consistent results for signal optimization. Two control schemes, fixed time and vehicle actuated, are optimized while multiple performance indexes are analyzed and compared for corresponding objectives. Solutions, representing compromise between different policies, are also obtained in the case study by optimizing an integrated performance index.     

A structural model of the use of automobiles by households: a case study of urban Australia

Central to the development of transport energy plans are predictions of automobile use. Together with a knowledge of the fuel efficiency of the vehicle fleet, usage acts interdependently to determine the amount of fuel consumed. In this paper we develop an econometric model system at the household level which treats vehicle use, fuel cost, and vehicle fuel efficiency as functionally interdependent. The data is drawn from Wave 1 of a4‐wave panel of Sydney households. The empirical evidence provides new insights into the influences on vehicle use and sets the context for continuing research efforts.     

The effect of uncertainty on US transport-related GHG emissions and fuel consumption out to 2050

The future of US transport energy requirements and emissions is uncertain. Transport policy research has explored a number of scenarios to better understand the future characteristics of US light-duty vehicles. Deterministic scenario analysis is, however, unable to identify the impact of uncertainty on the future US vehicle fleet emissions and energy use. Variables determining the future fleet emissions and fuel use are inherently uncertain and thus the shortfall in understanding the impact of uncertainty on the future of US transport needs to be addressed. This paper uses a stochastic technology and fleet assessment model to quantify the uncertainties in US vehicle fleet emissions and fuel use for a realistic yet ambitious pathway which results in about a 50% reduction in fleet GHG emissions in 2050. The results show the probability distribution of fleet emissions, fuel use, and energy consumption over time out to 2050. The expected value for the fleet fuel consumption is about 450 and 350 billion litres of gasoline equivalent with standard deviations of 40 and 80 in 2030 and 2050, respectively. The expected value for the fleet GHG emissions is about 1360 and 850 Mt CO₂ equivalent with standard deviation of 130 and 230 in 2030 and 2050 respectively. The parameters that are major contributors to variations in emissions and fuel consumption are also identified and ranked through the uncertainty analysis. It is further shown that these major contributors change over time, and include parameters such as: vehicle scrappage rate, annual growth of vehicle kilometres travelled in the near term, total vehicle sales, fuel economy of the dominant naturally-aspirated spark ignition vehicles, and percentage of gasoline displaced by cellulosic ethanol. The findings in this paper demonstrate the importance of taking uncertainties into consideration when choosing amongst alternative fuel and emissions reduction pathways, in the light of their possible consequences.     

Retrofitted plug-in hybrid vehicles: Results of NYIT drive share program

This paper presents results from a plug-in hybrid vehicle drive share program involving retrofitted hybrid electric vehicles. A potential for high fuel efficiency is indicated, however, the average fuel efficiency was only marginally better than conventional hybrid vehicles. This is due to the majority of vehicle miles traveled occurring on trips outside the “all electric” range and very short trips where fuel consumption is dominated by emissions control strategies. The work also considers the availability of the battery for vehicle to grid services and finds that there are a large number of trips in the afternoon period, typically when electrical demand is at a peak. Vehicle charging activity also tended towards daytime activity, contrary to the oft-assumed off-peak charging pattern.