Dynamics of Automated Guideway Transit Vehicle with Single-axle Bogies

Summary The steering type of a mechanical guidance system has been used for Automated Guideway Transit (AGT) system in Japan. Recently, the single-axle bogie system has developed for AGT vehicle and applied to Yurikamome 7200 type vehicle. This paper describes dynamic characteristics of AGT vehicle with single-axle bogies. Introducing a nonlinear, 15 degree-of-freedom dynamic model, a computer simulation study on the lateral motion of the AGT vehicle with single-axle bogies are carried out. In order to show the dynamic characteristics of the single-axle bogie clearly, it is compared to that of the AGT vehicle with conventional steering system. The simulation study with actual vehicle parameters shows that single-axle bogie has suitable characteristics for AGT system. The multi-body dynamics modeler, DADS, is used to build the dynamic model of AGT vehicle with single-axle bogies and this is used to demonstrate the vehicle motion in actual guideway. Obtained results are compared to that of the field test. It is shown that the vehicle dynamic response can be obtained in realistic situation by using multibody dynamics code, that is useful for designing both vehicle and guideway.     

Simulation of curving at low speed under high traction for passive steering hauling locomotives

The traction control in modern electric and diesel electric locomotives has allowed rail operators to utilise high traction adhesion levels without undue risk of damage from uncontrolled wheel spin. At the same time, some locomotive manufacturers have developed passive steering locomotive bogies to reduce wheel rail wear and further improve locomotive adhesion performance on curves. High locomotive traction loads in curving are known to cause the loss of steering performance in passive steering bogies. At present there are few publications on the curving performance of locomotive steering with linkage bogies. The most extreme traction curving cases of low speed and high adhesion for hauling locomotives have not been fully investigated, with effects of coupler forces and cant excess being generally ignored. This paper presents a simulation study for three axle bogie locomotives in pusher and pulling train positions on tight curves. The simulation study uses moderate and high traction adhesion levels of 16.6% and 37% for various rail friction conditions. Curving performance is assessed, showing forced steering bogies to have considerable advantages over self steering bogies. Likewise it is shown that self steering bogies are significantly better than yaw relaxation bogies at improving steering under traction. As the required traction adhesion approaches the rail friction coefficient, steering performance of all bogies degrades and yaw of the bogie frame relative to the track increases. Operation with excess cant and tensile coupler forces are both found to be detrimental to the wear performance of all locomotive bogies, increasing the bogie frame yaw angles. Bogie frame pitching is also found to have significant effect on steering, causing increased performance differences between bogie designs.     

Simulation of active steering control for curving under traction in hauling locomotives

Active steering control in the form of secondary yaw control (SYC) and actuated wheelset yaw (AWY) have been in prototype development. This paper presents a new active steering bogie design, actuated yaw force steering (AY-FS), that is able to steer under high traction loads in tight curves. The AY-FS bogie design is compared with the AWY design. The steering performance AWY under high traction loads has not been previously reported. This paper examines five control methods, three for AWY and two for AY-FS bogies and assesses the traction curving and stability control performance of the alternative designs and control methods compared with each other and to passive steering bogie designs. The curving performance results showed considerable advantage in the proposed AY-FS bogies over the AWY. It was shown that control must be applied to both the yaw angle and the steering angle of the bogie to achieve the best traction steering performance which was not possible with the AWY bogies. The proposed new bogie designs of AY-FS overall give better traction curving and stability performance than the AWY designs.     

Railway Vehicles With Generic Bogies Capable of Perfect Steering

The general form of the equations of motion of a symmetric railway vehicle with two unsymmetric two-axle bogies is derived. The equations include a generic elastic stiffness matrix that describes the nature and configuration of the structural connections between the various components of the vehicle. This matrix satisfies the condition for perfect steering (without generating creep forces) on uniform curves and the necessary condition for dynamic stability derived in previous work. The paper shows the application of these basic conditions to a class of generic unsymmetric bogies. The analysis has as its objective the derivation of the simplest rather than the most general configuration that meets the conditions imposed. The results are related to past and current practice. It is shown that perfect steering, with stability at low speeds, can be achieved by means of passive suspension elements not employing linkages, and that it is possible to simplify existing steering arrangements.     

Effects of the guideway's vibrational characteristics on the dynamics of a Maglev vehicle

The levitation control system in an electromagnetically levitated vehicle controls the voltage in its winding to maintain the air gap, which is the clearance between the electromagnet and the guideway, within an allowable range of variation, while strongly interacting with the flexible guideway. Thus, the vibrational characteristics of the guideway play an important role in the dynamics of Maglev (magnetically levitated) vehicles that utilise an active electromagnetic suspension system. In this study, the effects of the guideway's vibrational characteristics, such as natural frequency and damping, on the dynamics of the Maglev vehicle UTM-02 are numerically and experimentally analysed. From these analyses, the coupled equations of motion of the simplified vehicle–guideway model with three degrees of freedom are derived. Eigenvalues are calculated and frequency response analysis is also performed, in order to obtain a clear understanding of the dynamic characteristics resulting from the guideway's vibrational characteristics. To verify the numerical results, air gap tests of the urban Maglev vehicle UTM-02 are also carried out. These results lead us to recommend that the natural frequency of the guideway be decreased by increasing mass density rather than by decreasing rigidity, and that its damping ratio be increased in the Maglev vehicle UTM-02 employing a five-state feedback control law as a levitation control law.     

Railway Vehicles With Generic Bogies Capable of Perfect Steering

SUMMARY

The general form of the equations of motion of a symmetric railway vehicle with two unsymmetric two-axle bogies is derived. The equations include a generic elastic stiffness matrix that describes the nature and configuration of the structural connections between the various components of the vehicle. This matrix satisfies the condition for perfect steering (without generating creep forces) on uniform curves and the necessary condition for dynamic stability derived in previous work. The paper shows the application of these basic conditions to a class of generic unsymmetric bogies. The analysis has as its objective the derivation of the simplest rather than the most general configuration that meets the conditions imposed. The results are related to past and current practice. It is shown that perfect steering, with stability at low speeds, can be achieved by means of passive suspension elements not employing linkages, and that it is possible to simplify existing steering arrangements.     

面向结构的汽车齿轮齿条式转向系仿真模型

针对齿轮齿条式转向系统建立了面向结构的转向系统模型,包括转向齿条动力学和转向横拉杆以及转向立柱的弹性特性、转向减振器阻尼力、转向干摩擦、液压助力特性等。所建模型具有完备的动力学自由度,能准确地反映路面激励对转向轮运动状态地影响。并将该模型嵌入到整车动力学模型中,对两种典型工况进行了仿真计算。通过仿真结果与道路试验结果的对比,验证了该模型的正确性。     

Comparative stability of bogie vehicles with passive and active guidance as influenced by friction and traction

The stability of four bogie configurations is considered for a range of friction coefficients and traction ratios. The basis of comparison is the vehicle with conventional solid-axle railway wheelsets mounted in bogies with relatively stiff plan-view suspension. As improved performance of the wheelset in guidance can be achieved with various forms of passive and active guidance, bogies with yaw relaxation, with conventional wheelsets and active stabilisation and with independent wheels and active guidance are considered. Stability of each of these configurations is studied using a full nonlinear solution of the equations of motion. It is shown that the stability of the passive bogie configurations is very robust in the presence of traction and braking and variations of friction and that this is also true for an actively guided bogie with independent wheels. However, for a bogie with conventional wheelsets and active stabilisation, creep saturation effects can reduce stability significantly.     

Analysis of dynamic response of the high-speed EMS maglev vehicle/guideway coupling system with random irregularity

A new dynamic model of a high-speed EMS maglev vehicle/guideway interaction is presented. The model considers the vehicle and the guideway as an integral system and couples vertical interaction with lateral interaction. The vehicle subsystem is modeled as a multi-body system, which runs on the guideway with a constant velocity. The guideway substructure is modeled as an elastic beam. The attractive magnetic forces between vehicle and guideway are decided by controller, observer, and filter. A special simulation program is developed. Numerical results of the program are compared with test results. The results show that the coupling model is appropriate and the simulation program is credible primarily. Applications of coupling model to the investigation of the effect of irregularities on maglev system are reported at the end of the paper. The studies in this paper can be used to evaluate and optimize dynamic performances of the high-speed EMS maglev system.     

A semi-active control suspension system for railway vehicles with magnetorheological fluid dampers

The high-speed train has achieved great progress in the last decades. It is one of the most important modes of transportation between cities. With the rapid development of the high-speed train, its safety issue is paid much more attention than ever before. To improve the stability of the vehicle with high speed, extra dampers (i.e. anti-hunting damper) are used in the traditional bogies with passive suspension system. However, the curving performance of the vehicle is undermined due to the extra lateral force generated by the dampers. The active suspension systems proposed in the last decades attempt to solve the vehicle steering issue. However, the active suspension systems need extra actuators driven by electrical power or hydraulic power. There are some implementation and even safety issues which are not easy to be overcome. In this paper, an innovative semi-active controlled lateral suspension system for railway vehicles is proposed. Four magnetorheological fluid dampers are fixed to the primary suspension system of each bogie. They are controlled by online controllers for enhancing the running stability on the straight track line on the one hand and further improving the curving performance by controlling the damper force on the other hand. Two control strategies are proposed in the light of the pure rolling concept. The effectiveness of the proposed strategies is demonstrated by SIMPACK and Matlab co-simulation for a full railway vehicle with two conventional bogies.     

Theoretical Comparison Between Different Configurations of Radial and Conventional Bogies

This article compares the dynamic behaviour of different configurations of radial and conventional two-axle bogies. In general, the design parameters for a better curve negotiation are not compatible with those for good stability. As the main target of this article is to compare the curving performances of different bogies under the same design basis, several bogie configurations with the same level of stability, obtained by choosing proper primary suspension stiffnesses, have been used. The comparison includes a conventional bogie and three radial bogies with differing self-steering and forced-steering principles in three different passenger services: High Speed, Regional and Mass Transit. The analysis has been concentrated on parameters such as stability, lateral wheel-track forces in curve and wheel wear indices. The results show that the radial bogie configurations studied do not make significant contributions in general applications with regard to a conventional bogie. It is only under specific running conditions and types of service that some radial bogie configurations provide advantages with respect to the conventional bogie.     

Analysis of dynamic response of the high-speed EMS maglev vehicle/guideway coupling system with random irregularity

A new dynamic model of a high-speed EMS maglev vehicle/guideway interaction is presented. The model considers the vehicle and the guideway as an integral system and couples vertical interaction with lateral interaction. The vehicle subsystem is modeled as a multi-body system, which runs on the guideway with a constant velocity. The guideway substructure is modeled as an elastic beam. The attractive magnetic forces between vehicle and guideway are decided by controller, observer, and filter. A special simulation program is developed. Numerical results of the program are compared with test results. The results show that the coupling model is appropriate and the simulation program is credible primarily. Applications of coupling model to the investigation of the effect of irregularities on maglev system are reported at the end of the paper. The studies in this paper can be used to evaluate and optimize dynamic performances of the high-speed EMS maglev system.     

Theoretical Comparison Between Different Configurations of Radial and Conventional Bogies

This article compares the dynamic behaviour of different configurations of radial and conventional two-axle bogies. In general, the design parameters for a better curve negotiation are not compatible with those for good stability. As the main target of this article is to compare the curving performances of different bogies under the same design basis, several bogie configurations with the same level of stability, obtained by choosing proper primary suspension stiffnesses, have been used. The comparison includes a conventional bogie and three radial bogies with differing self-steering and forced-steering principles in three different passenger services: High Speed, Regional and Mass Transit. The analysis has been concentrated on parameters such as stability, lateral wheel-track forces in curve and wheel wear indices. The results show that the radial bogie configurations studied do not make significant contributions in general applications with regard to a conventional bogie. It is only under specific running conditions and types of service that some radial bogie configurations provide advantages with respect to the conventional bogie.     

智能汽车自动紧急转向避撞的跟踪控制方法对比研究

为了提高智能汽车的主动安全性,提出3种不同的自动紧急转向避撞跟踪控制方法。首先建立汽车避撞简化模型,对制动、转向及两者相结合的3种不同避撞方式进行对比分析。其次,为深入研究汽车避撞过程中的实际响应,建立包含转向、制动及悬架3个子系统耦合特性的底盘18自由度统一动力学模型,并进行相关试验验证。随后构建智能汽车自动紧急转向避撞控制框架,对五次多项式参考路径和七次多项式参考路径的横摆角速度和横摆角加速度进行对比分析。接着以线性2自由度转向动力学模型为参考对象,对最优控制四轮转向、最优控制前轮转向、前馈与反馈控制相结合的前轮转向3种不同的跟踪控制系统分别进行设计。最后,以汽车底盘18自由度统一动力学模型为研究对象,对上述3种避撞控制系统进行仿真试验对比分析。研究结果表明：与制动避撞相比而言,转向避撞所需的纵向距离有较大降低,随着车速的增加和路面附着系数的越低,效果越明显;七次多项式参考路径比五次多项式参考路径的避撞过渡过程更为平缓,当实际车速与控制器所用车速不一致时,前者避撞性能表现更优;最优四轮转向控制系统在高、低2种不同附着路面都具有较好的避撞效果,最优前轮转向控制系统次之,而前馈与反馈相结合的前轮转向控制系统在低附着路面上则表现出严重的失稳。     

Conceptual design of high-speed semi-low-floor bogie for train-tram

Train-tram railway vehicles implement the connection between urban tramlines and the surrounding railway network. Train-tram railway vehicles, which use existing infrastructure, can help to avoid large investments in new railways or tramlines and make interchanges between city center and surrounding cities unnecessary. However, present train-tram rail vehicle cannot carry out the integration of operating by means of high speed in intercity railways with operating on small radius of curvature in inner city tramlines. This paper aims to develop a new model for solid wheelsets train-tram railway vehicles, which will not only pass the curve of 25mR radius of curvature traveling on inner city tramlines with the speed of 18 km/h, but also can travel on straight railway with 200 km/h high speed between intercity. In this paper, a new train-tram model, including five car-body and five motor bogies with ten traction motors, is addressed. Expect as a real rail vehicle testing, this study prefer virtual simulation, which is an effective way to show the rail vehicle performance, such as ride stability, ride comfort and ride safety, by means of evaluating the dynamic characteristics of rail vehicle. Moreover, Design of Experiment (DOE) method is used to optimize solid wheelsets bogie system on improving passenger comfort, safety and stability of train-tram. Parameters of components of bogie system are tuned to minimize the derailment coefficient and the ride comfort index. The results shows that the best comfort index for passenger and minimum derailment coefficient are found. The results also show that this optimized new train-tram model is reliable and practical enough to be applied on real rail vehicle design.     

Dynamic simulations of the freight three-piece bogie motion in curve

A loaded freight vehicle with two three-piece bogies is modelled using the accessible mathematical software MATLAB. The results are compared with its corresponding ADAMS/Rail dynamic multibody simulation model, where similar derailment factors are encountered for the freight vehicle. Both models reveal that the possibility of derailment increases immediately after entering and at the end of the curve – signifying the beginning and the end of the curve as two major points for derailment. Although a three-piece bogie construction is rather simple, its mathematical model proves to be very complex and is nonlinear due to the reported frictional contact at the rail/wheel interface as well as the friction wedges. This research is stimulated by bogie derailments that have occurred in the Iranian railways as well as those in the rest of the world.     

An investigation on motor-driven power steering-based crosswind disturbance compensation for the reduction of driver steering effort

This paper describes a lateral disturbance compensation algorithm for an application to a motor-driven power steering (MDPS)-based driver assistant system. The lateral disturbance including wind force and lateral load transfer by bank angle reduces the driver's steering refinement and at the same time increases the possibility of an accident. A lateral disturbance compensation algorithm is designed to determine the motor overlay torque of an MDPS system for reducing the manoeuvreing effort of a human driver under lateral disturbance. Motor overlay torque for the compensation of driver's steering torque induced by the lateral disturbance consists of human torque feedback and feedforward torque. Vehicle–driver system dynamics have been investigated using a combined dynamic model which consists of a vehicle dynamic model, driver steering dynamic model and lateral disturbance model. The human torque feedback input has been designed via the investigation of the vehicle–driver system dynamics. Feedforward input torque is calculated to compensate additional tyre self-aligning torque from an estimated lateral disturbance. The proposed compensation algorithm has been implemented on a developed driver model which represents the driver's manoeuvreing characteristics under the lateral disturbance. The developed driver model has been validated with test data via a driving simulator in a crosswind condition. Human-in-the-loop simulations with a full-scale driving simulator on a virtual test track have been conducted to investigate the real-time performance of the proposed lateral disturbance compensation algorithm. It has been shown from simulation studies and human-in-the-loop simulation results that the driver's manoeuvreing effort and a lateral deviation of the vehicle under the lateral disturbance can be significantly reduced via the lateral disturbance compensation algorithm.     

Prediction of ride quality of a Maglev vehicle using a full vehicle multi-body dynamic model

In magnetically levitated (Maglev) transportation systems, especially in electromagnetic suspension system (EMS) type Maglev systems, highly accurate prediction of ride quality is very important in order to reasonably relax guideway construction tolerances or constraints and stiffness while meeting the specification for ride comfort, thereby reducing guideway construction and maintenance costs. A full vehicle multi-body dynamic model is proposed, to facilitate a rigorous ride quality prediction of an EMS-type Maglev vehicle. Using the more realistic dynamic model proposed in this paper, the effects of guideway deflection limits, surface roughness, and levitation control system parameters on ride quality are studied numerically. The results obtained from the simulation studies are then used to facilitate a discussion of the trade-off between guideway smoothness and vehicle suspension. It can be expected that these studies could suggest cost-effective specifications for guideway construction tolerances and stiffness and EMS.     

The Steering Characteristics of Multiple Axle Bogie Systems

Legislation limits the load that may be transferred to the roadway by the axies of a commercial vehicle and this has resulted in the development of multi axle bogies for both the tractor and trailer units of articulated vehicles and at the rear of rigid vehicles, some of these bogies contain self steering or articulation steered axles

Experience shows that the tyre wear characteristics of multi axle bogies may be unsatisfactory. The paper analyses the role of such bogies in the context of vehicle handling and shows how the lateral tyre forces vary between the axles. An hypotheses relating the forces in a steady state turn to wear is given. The analysis may also be applied to the general case of vehicle handling.     

融合预瞄与势场栅格法的紧急避撞驾驶人模型

紧急避障工况下的驾驶人操作具有响应快且动作幅值较大的特点，传统预瞄驾驶人模型已不能适应紧急避障工况的需求，故考虑实际避撞场景开发相应的驾驶人模型就显得尤为必要。针对此种状况，基于驾驶模拟器，结合紧急避撞工况实际驾驶人操纵数据，提出了一种融合预瞄与势场栅格法的紧急避撞驾驶人模型。首先针对紧急避撞工况下车辆运动特点，建立车辆横、纵向耦合非线性动力学模型，并给出其状态空间方程描述；其次，离线仿真分析紧急避撞系统特征，并结合线性二次型最优控制，建立最优曲率预瞄+跟踪误差反馈驾驶人模型；再者，基于紧急避撞工况下真实驾驶人经验转向行为数据，开发基于势场栅格法的驾驶人模型，为进一步提高驾驶人模型对避障行驶工况的适应性，将基于势场栅格法的驾驶人模型与最优曲率预瞄+跟踪误差反馈驾驶人模型进行融合，并基于Sigmoid函数实现两者输出的权重分配；最后，针对所提出的融合预瞄与势场栅格法的驾驶人模型，开展基于避撞台架的驾驶人在环仿真试验以及实车试验。研究结果表明：在紧急避撞工况下，对比最优曲率预瞄+跟踪误差反馈驾驶人模型，融合预瞄与势场栅格法的驾驶人模型输出的转向动作与实际驾驶人行为较为接近，可在保证避障安全性的前提下，兼顾避障路径跟踪精度与车辆行驶的稳定性。