共查询到18条相似文献,搜索用时 203 毫秒
1.
2.
3.
4.
5.
单壳体潜艇敷设声学覆盖层应具有机械噪声、水动力噪声和声目标强度控制的多功能特性,为此需要解决两个基本问题:其一,提高机械噪声低频控制效果;其二,实现覆盖层的多功能兼容性。本文从降低机械激励壳体声辐射角度出发,采用模态叠加法,建立无限大理想水介质中分层梯度声学覆盖层与有限长加肋圆柱壳的声振耦合及声辐射模型,基于声学覆盖层模态传递函数特性,计算分析声学覆盖层分层梯度分布及厚度、层数等参数对加肋圆柱壳辐射噪声影响的特征和规律,给出分层梯度声学覆盖层的特征声阻抗渐变参数分布并与敷设均匀声学覆盖层降噪特性比较。研究结果表明:加肋圆柱壳敷设内层至外层声阻抗逐渐递增,各分层取慢波速的声学覆盖层,具有比均匀声学覆盖层更有效地降低外表面振动位移的特性,可明显增加降噪效果,并扩展低频降噪范围。声学覆盖层的优化应增加声阻抗的内分层失配和外分层适配的效应,有利于降低加肋圆柱壳低频声辐射,并可兼顾降低声目标强度。 相似文献
6.
7.
8.
9.
10.
11.
轴系纵振对双层圆柱壳体水下声辐射的影响研究 总被引:6,自引:1,他引:5
采用有限元/边界元方法(FEM/BEM)对推进轴系纵振引起的双层圆柱壳水下辐射噪声特性进行研究.使用ANSYS有限元软件建立了流固耦合的有限元模型,计算了流-固耦合状态下结构振动位移响应.利用边界元技术对结构水下辐射噪声特性进行研究,并对推力轴承的布置位置和结构进行了改变,从而改变了激振力的大小及传递途径,对轴系纵振引起的结构水下辐射噪声起到了一定的改善. 相似文献
12.
基于径向形函数可任意变阶的映射声无限元法,对加筋双层圆柱壳的振动声辐射特性进行分析.取无限长圆柱壳体为研究对象,基于映射声无限元法,通过数值计算法对其辐射声场进行研究分析;并将其数值结果与解析解进行对比分析,结果显示二者吻合较好,验证了本文方法的可行性,同时发现此方法具有计算精度好、效率高等优点.在此研究基础上,基于映射变阶声无限元法,对加筋双层圆柱壳的内壳振动特性和远场声辐射特性进行分析,分别讨论内外壳厚度、型材尺寸和托板厚度对加筋双层圆柱壳内壳体表面振动均方加速度级及远场辐射声压级的影响,其分析结果表明,内壳厚度结构参数对其内表面振动均方加速度级及远场辐射声压级的影响最明显. 相似文献
13.
Damping materials are widely used and playing an essential role in reducing the vibration and noise of various ships and underwater vehicles. In practical engineering, damping materials are often applied over the structural surface of ships and underwater vehicles. They are generally distributed not evenly in the whole area, but locally in some vital regions. The stiffened cylindrical shell is the most representative configuration for the main structure of underwater vehicles. Therefore, research on modeling and calculation of underwater acoustic radiation from stiffened cylindrical shells locally treated with damping has high practical value. This paper introduces a mixed analytical-numerical acoustic-vibration interaction method to achieve efficient calculation of the vibration and acoustic radiation from a locally damped cylindrical shell immersed in water. Two kinds of vibration and noise reduction measures are proposed for the damping treatment of a large-scale stiffened cylindrical shell structure. Calculation and analysis are carried out for both measures. The results can provide reference for developing the technology of reducing vibration and noise from ships and underwater vehicles via damping treatment. 相似文献
14.
[Objective]This paper proposes a method for calculating the acoustic and vibration response of underwater cylindrical shell structures based on land-based vibration test results.[Methods]An axisymmetric boundary element method (BEM) is introduced to describe the radiation acoustic field of the shell. The relationship of acoustic pressure at the nodal point of the generatrix with velocity is obtained by solving the numerical solution of the boundary element integral equation, then the acoustic radiation impedance matrix of the outer surface of the shell and acoustic transfer vector (ATV) are constructed. Based on the assumption that the low-order vibration mode of an underwater cylindrical shell is the same as that of an onshore cylindrical shell, combined with the modes and acoustic radiation impedance matrix of an onshore cylindrical shell, the modal added mass and damping are calculated. [Results]The natural frequency calculation formula of the underwater cylindrical shell is established on the basis of the onshore mode, and the calculation method of underwater vibration response and acoustic radiation characteristics with the vibration response in air as input is obtained based on mode superposition method.[Conclusion ] The numerical results of a typical cylindrical shell with internal structure show that the method meets the engineering accuracy requirements. © 2023 Chinese Journal of Ship Research. All rights reserved. 相似文献
15.
为研究水下双层圆柱壳结构全频段声振特性,基于VA-ONE建立了FE-BEM混合法、FE-SEA混合法及SEA法3种不同的计算模型,进行了不同辐射介质中辐射声功率及外壳振速的计算,并进一步研究了内外壳及肋板厚度、约束条件、激励位置及层间流体对双层圆柱壳声辐射特性的影响;基于FE-BEM混合法研究了圆柱壳结构的声散射特性;研究了肋板在结构振动能量传递中的作用,提出了2种阻尼肋板的减振降噪方案并进行相关仿真分析.结果表明:重流体能够抑制结构的振动,但由于重流体声阻抗较大,结构的辐射声功率变大;结构声散射曲线在某些频率处出现峰值,且峰值频率与结构自身的固有特性有关;阻尼肋板能得到较好的减振降噪效果,工程上建议使用金属聚氨酯阻尼肋板. 相似文献
16.
17.
为研究凹陷对环肋圆柱壳水下振动与声辐射的影响,采用结构有限元耦合流体边界元方法,通过FOR TRAN代码计算流体附加质量和附加阻尼,用DMAP代码将附加质量和附加阻尼矩阵同结构质量和结构阻尼矩阵叠加,实现了流固耦合计算,得到了在不同凹陷范围、凹陷深度、凹陷位置,以及力作用点与凹陷的相对位置时,圆柱壳的水下均方法向速度级和辐射声功率级频响曲线。分析结果表明:当力的作用点不在凹陷位置时,凹陷对圆柱壳的水下振动与辐射噪声影响很小,可以忽略;当力的作用点在凹陷位置时,带有凹陷的圆柱壳水下均方法向速度级和辐射声功率级的分贝值明显高于无凹陷时的情形,曲线峰值相差达4 dB。因此,在对带有凹陷的环肋圆柱壳进行试验研究时,应尽量避免激励力作用在凹陷位置,这样得到的结果会更准确。 相似文献