Brushless PM machine drive in electric and hybrid electric vehicles based on the space vector current control

This paper presents a space vector current controller for a brushless permanent magnet motor in electric and hybrid electric vehicles. The proposed current controller selects space vectors based on the sector selection under a three-level hysteresis comparator to decrease the current ripple. The proposed approach can improve the performance of a brushless PM drive such as the average switching frequency and the total harmonic distortion (THD) compared with the conventional hysteresis current control. The experiment is performed first to verify the proposed control. Then, the method is implemented in a hybrid electric vehicle simulation model with standard driving cycles based on the control strategy to evaluate the drive performance in the vehicle system. The experimental and simulation results indicate that the presented control can improve the performance of the brushless PM machine drive.     

A vehicle stability control strategy with adaptive neural network sliding mode theory based on system uncertainty approximation

Modelling uncertainty, parameter variation and unknown external disturbance are the major concerns in the development of an advanced controller for vehicle stability at the limits of handling. Sliding mode control (SMC) method has proved to be robust against parameter variation and unknown external disturbance with satisfactory tracking performance. But modelling uncertainty, such as errors caused in model simplification, is inevitable in model-based controller design, resulting in lowered control quality. The adaptive radial basis function network (ARBFN) can effectively improve the control performance against large system uncertainty by learning to approximate arbitrary nonlinear functions and ensure the global asymptotic stability of the closed-loop system. In this paper, a novel vehicle dynamics stability control strategy is proposed using the adaptive radial basis function network sliding mode control (ARBFN-SMC) to learn system uncertainty and eliminate its adverse effects. This strategy adopts a hierarchical control structure which consists of reference model layer, yaw moment control layer, braking torque allocation layer and executive layer. Co-simulation using MATLAB/Simulink and AMESim is conducted on a verified 15-DOF nonlinear vehicle system model with the integrated-electro-hydraulic brake system (I-EHB) actuator in a Sine With Dwell manoeuvre. The simulation results show that ARBFN-SMC scheme exhibits superior stability and tracking performance in different running conditions compared with SMC scheme.     

State observer-based sliding mode control for semi-active hydro-pneumatic suspension

This paper proposes an improved virtual reference model for semi-active suspension to coordinate the vehicle ride comfort and handling stability. The reference model combines the virtues of sky-hook with ground-hook control logic, and the hybrid coefficient is tuned according to the longitudinal and lateral acceleration so as to improve the vehicle stability especially in high-speed condition. Suspension state observer based on unscented Kalman filter is designed. A sliding mode controller (SMC) is developed to track the states of the reference model. The stability of the SMC strategy is proven by means of Lyapunov function taking into account the nonlinear damper characteristics and sprung mass variation of the vehicle. Finally, the performance of the controller is demonstrated under three typical working conditions: the random road excitation, speed bump road and sharp acceleration and braking. The simulation results indicated that, compared with the traditional passive suspension, the proposed control algorithm can offer a better coordination between vehicle ride comfort and handling stability. This approach provides a viable alternative to costlier active suspension control systems for commercial vehicles.     

Linear matrix inequality based control of vehicle active suspension system

Linear matrix inequality (LMI) methods, novel techniques in solving optimisation problems, were introduced as a unified approach for vehicle's active suspension system controller design. LMI methods were used to provide improved and computationally efficient controller design techniques. The active suspension problem was formulated as a standard convex optimisation problem involving LMI constraints that can be solved efficiently using recently developed interior point optimisation methods. An LMI based controller for a vehicle system was developed. The controller design process involved setting up an optimisation problem with matrix inequality constraints. These LMI constraints were derived for a vehicle suspension system. The resulting LMI controller was then tested on a quarter-car model using computer simulations. The LMI controller results were compared with an optimal PID controller design solution. The LMI controller was further tested by incorporating a nonlinear term in the vehicle's suspension model; the LMI's controller degraded response was enhanced by using gain-scheduling techniques. The LMI controller with gain-scheduling gave good results in spite of the unmodelled dynamics in the suspension system, which was triggered by large deflections due to off-road driving.     

New level of vehicle comfort and vehicle stability via utilisation of the suspensions anti-dive and anti-squat geometry

In this article a novel vehicle dynamics control concept is designed for a vehicle equipped with wheel individual electric traction machines, electronically controlled brakes and semi-active suspensions. The suspension's cross-couplings between traction forces and vertical forces via anti-dive and anti-squat geometry is utilised in the control concept to improve driving comfort and driving stability. The control concept is divided into one main and two cascaded branches. The main controller consists of a multivariable vehicle dynamics controller and a control allocation scheme to improve the vehicle's driving comfort. The cascaded feedback loops maintain the vehicle's stability according to wheel slip and vehicle sideslip. The performance of the combined vehicle dynamics controller is compared to a standard approach in simulation. It can be stated that the controller piloting semi-active suspensions together with brake and traction devices enables a superior performance regarding comfort and stability.     

用于电子稳定程序的汽车模型和控制策略

电子稳定程序(ElectronicStabilityProgram)是行驶车辆的一种主动安全系统,它综合了制动防抱死系统,驱动力控制系统和横摆力矩控制系统,使行驶车辆的安全性得到很大的提高。本文首先建立用于电子稳定程序的汽车模型,包括车身模型、悬架模型、转向模型、轮胎模型、制动系统模型、发动机模型和传动系模型。然后建立了主动横摆控制的控制逻辑,通过加入制动防抱死系统和牵引力控制系统,构成了电子稳定程序的控制逻辑。最后对移线运动、紧急转向、制动转向、驱动转向4个典型的工况进行仿真,从而验证了电子稳定程序控制逻辑的正确性。     

A novel direct yaw moment controller for in-wheel motor electric vehicles

A novel direct yaw moment controller is developed in this paper. A hierarchical control architecture is adopted in the controller design. In the upper controller, a driver model and a vehicle model are used to obtain the driver's intention and the vehicle states, respectively. The upper controller determines the desired yaw moment by means of sliding mode control. The lower controller distributes differential longitudinal forces according to the desired yaw moment. A nonlinear tyre model, ‘UniTire’, is utilised to develop the novel distribution strategy and the control boundary.     

A modified integral sliding mode control to lateral stabilisation of 4-wheel independent drive electric vehicles

This paper presents a novel sliding mode controller (SMC) and its application in the lateral stability control of a 4-wheel independent drive electric vehicle. The structure of the SMC is modified and online-tuned to ensure vehicle system stability, and to track the desired vehicle motion references when an in-wheel motor fault happens. The proposed controller is faster, more accurate, more robust, and with smaller chattering than common SMCs chatter. The effectiveness of the introduced approach is investigated through conducted simulations in the CARSIM and MATLAB software environments.     

Diesel hybrid electric vehicle hardware system

A controller for a diesel hybrid electric vehicle based on a V-cycle development approach is investigated in this paper. The hardware and infra program of the Hybrid Control Unit (HCU) are discussed in detail. The hardware system is designed based on circuit simulation; while the infra system is written with assemble language. Time sharing mode, buffer sharing mode and multi-task schedule method are used to ensure real-time communication in the infra program design. Based on multi-thread technology, hardware in loop test system is also designed. The hardware in loop and bench tests show that the controller could meet the requirements of the hybrid electric vehicle (HEV) and communicate in real-time. Circuit simulation, HCU, infra program and hardware in loop test form the effective V-cycle development platform to design a hardware system for a diesel HEV controller.     

Disturbance Observer-Based Sideslip Angle Control for Improving Cornering Characteristics of In-Wheel Motor Electric Vehicles

In this paper, a robust sideslip angle controller based on the direct yaw moment control (DYC) is proposed for in-wheel motor electric vehicles. Many studies have demonstrated that the DYC is one of the effective methods to improve vehicle maneuverability and stability. Previous approaches to achieve the DYC used differential braking and active steering system. Not only that, the conventional control systems were commonly dependent on the feedback of the yaw rate. In contrast to the traditional control schemes, however, this paper proposes a novel approach based on sideslip angle feedback without controlling the yaw rate. This is mainly because if the vehicle sideslip angle is controlled properly, the intended sideslip angle helps the vehicle to pass through the corner even at high speed. On the other hand, the vehicle may become unstable because of the too large sideslip caused by unexpected yaw disturbances and model uncertainties of time-varying parameters. From this aspect, disturbance observer (DOB) is employed to assure robust performance of the controller. The proposed controller was realized in CarSim model described actual electric vehicle and verified through computer simulations.     

串联式混合动力电动汽车发动机转速新型PID控制

在混合动力电动汽车中发动机转速的优化控制是降低油耗、减少排放的关键。而发动机转速系统是一个复杂的变参数非线性系统，且很难获得其准确数学模型。本文在常规的PID控制的基础上引入单神经元自适应控制，提出了发动机转速控制的优化目标。台架试验证明控制器能够较好地实现对发动机转速控制。     

Vehicle stability control system for enhancing steerabilty,lateral stability,and roll stability

The Vehicle stability control system is an active safety system designed to prevent accidents from occurring and to stabilize dynamic maneuvers of a vehicle by generating an artificial yaw moment using differential brakes. In this paper, in order to enhance vehicle steerability, lateral stability, and roll stability, each reference yaw rate is designed and combined into a target yaw rate depending on the driving situation. A yaw rate controller is designed to track the target yaw rate based on sliding mode control theory. To generate the total yaw moment required from the proposed yaw rate controller, each brake pressure is properly distributed with effective control wheel decision. Estimators are developed to identify the roll angle and body sideslip angle of a vehicle based on the simplified roll dynamics model and parameter adaptation approach. The performance of the proposed vehicle stability control system and estimation algorithms is verified with simulation results and experimental results.     

Robust control for four-wheel-independent-steering electric vehicle with steer-by-wire system

A four-wheel-independent-steering (4WIS) electric vehicle (EV) with steer-by-wire (SBW) system is proposed in this paper. The fast terminal sliding mode controller (FTSMC) is designed for the SBW system to suppress external disturbances. Taking unstructured and structured uncertainties into consideration, a robust controller is designed for the 4WIS EV utilizing μ synthesis approach and the controller order reduction is implemented based on Hankel-Norm approximation. Since sideslip angle is the feedback signal of robust controller and it is hard to measure, the extended Kalman filter (EKF) is employed to estimate sideslip angle. To evaluate the vehicle performance with the designed control system, step and sinusoidal steering maneuvers are simulated and analyzed. Simulation results show that the designed control system have good tracking ability, strong robust stability and good robust performance to improve vehicle stability and handing performance.     

Improvement of drivability and fuel economy with a hybrid antiskid braking system in hybrid electric vehicles

When braking on wet roads, Antilock Braking System (ABS) control can be triggered because the available brake torque is not sufficient. When the ABS system is active, for a hybrid electric vehicle, the regenerative brake is switched off to safeguard the normal ABS function. When the ABS control is terminated, it would be favorable to reactivate the regenerative brake. However, recurring cycles from ABS to motor regenerative braking could occur. This condition is felt to be unpleasant by the driver and has adverse effects on driving stability. In this paper, a novel hybrid antiskid braking system using fuzzy logic is proposed for a hybrid electric vehicle that has a regenerative braking system operatively connected to an electric traction motor and a separate hydraulic braking system. This control strategy and the method for coordination between regenerative and hydraulic braking are developed. The motor regenerative braking controller is designed. Control of regenerative and hydraulic braking force distribution is investigated. The simulation and experimental results show that vehicle braking performance and fuel economy can be improved and the proposed control strategy and method are effective and robust.     

Semi-active control of tracked vehicle suspension incorporating magnetorheological dampers

In past years, the application of magnetorheological (MR) and electrorheological dampers in vehicle suspension has been widely studied, mainly for the purpose of vibration control. This paper presents theoretical study to identify an appropriate semi-active control method for MR-tracked vehicle suspension. Three representative control algorithms are simulated including the skyhook, hybrid and fuzzy-hybrid controllers. A seven degrees-of-freedom tracked vehicle suspension model incorporating MR dampers has been adopted for comparison between the performance of the three controllers. The model differential equations are derived based on Newton's second law of motion and the proposed control methods are developed. The performance of each control method under bump and sinusoidal road profiles for different vehicle speeds is simulated and compared with the performance of the conventional suspension system in time and frequency domains. The results show that the performance of tracked vehicle suspension with MR dampers is substantially improved. Moreover, the fuzzy-hybrid controller offers an excellent integrated performance in reducing the body accelerations as well as wheel bounce responses compared with the classical skyhook and hybrid controllers.     

A novel vehicle dynamics stability control algorithm based on the hierarchical strategy with constrain of nonlinear tyre forces

Direct yaw moment control (DYC), which differentially brakes the wheels to produce a yaw moment for the vehicle stability in a steering process, is an important part of electric stability control system. In this field, most control methods utilise the active brake pressure with a feedback controller to adjust the braked wheel. However, the method might lead to a control delay or overshoot because of the lack of a quantitative project relationship between target values from the upper stability controller to the lower pressure controller. Meanwhile, the stability controller usually ignores the implementing ability of the tyre forces, which might be restrained by the combined-slip dynamics of the tyre. Therefore, a novel control algorithm of DYC based on the hierarchical control strategy is brought forward in this paper. As for the upper controller, a correctional linear quadratic regulator, which not only contains feedback control but also contains feed forward control, is introduced to deduce the object of the stability yaw moment in order to guarantee the yaw rate and side-slip angle stability. As for the medium and lower controller, the quantitative relationship between the vehicle stability object and the target tyre forces of controlled wheels is proposed to achieve smooth control performance based on a combined-slip tyre model. The simulations with the hardware-in-the-loop platform validate that the proposed algorithm can improve the stability of the vehicle effectively.     

Chassis integrated control for active suspension,active front steering and direct yaw moment systems using hierarchical strategy

This paper proposes a novel integrated controller with three-layer hierarchical structure to coordinate the interactions among active suspension system (ASS), active front steering (AFS) and direct yaw moment control (DYC). First of all, a 14-degree-of-freedom nonlinear vehicle dynamic model is constructed. Then, an upper layer is designed to calculate the total corrected moment for ASS and intermediate layer based on linear moment distribution. By considering the working regions of the AFS and DYC, the intermediate layer is functionalised to determine the trigger signal for the lower layer with corresponding weights. The lower layer is utilised to separately trace the desired value of each local controller and achieve the local control objectives of each subsystem. Simulation results show that the proposed three-layer hierarchical structure is effective in handling the working region of the AFS and DYC, while the quasi-experimental result shows that the proposed integrated controller is able to improve the lateral and vertical dynamics of the vehicle effectively as compared with a conventional electronic stability controller.     

基于动态目标调整的汽车全轮纵向力分配的研究

针对现有汽车稳定性控制系统中,汽车全轮纵向力分配算法在极端工况下出现轮胎力饱和.导致滑移率控制器过多介入而出现控制振荡和对控制目标的调整不合理等问题,提出了一种新的主动动态目标调整的全轮纵向力分配算法.该算法在极端工况下,根据车辆运动状态和路面附着状态,对直接横摆力矩控制目标M_(xd)和纵向驱动/制动力控制目标F_(xd)进行主动动态的调节.仿真结果表明,采用该算法解决了现有全轮纵向力分配算法的上述问题.     

Semi-active H∞ control of high-speed railway vehicle suspension with magnetorheological dampers

In this paper, semi-active H∞ control with magnetorheological (MR) dampers for railway vehicle suspension systems to improve the lateral ride quality is investigated. The proposed semi-active controller is composed of a H∞ controller as the system controller and an adaptive neuro-fuzzy inference system (ANFIS) inverse MR damper model as the damper controller. First, a 17-degree-of-freedom model for a full-scale railway vehicle is developed and the random track irregularities are modelled. Then a modified Bouc–Wen model is built to characterise the forward dynamic characteristics of the MR damper and an inverse MR damper model is built with the ANFIS technique. Furthermore, a H∞ controller composed of a yaw motion controller and a rolling pendulum motion (lateral motion+roll motion) controller is established. By integrating the H∞ controller with the ANFIS inverse model, a semi-active H∞ controller for the railway vehicle is finally proposed. Simulation results indicate that the proposed semi-active suspension system possesses better attenuation ability for the vibrations of the car body than the passive suspension system.     

Comparing rear wheel steering and rear active differential approaches to vehicle yaw control

A comparison between two different approaches to vehicle stability control is carried out, employing a robust non-parametric technique in the controller design. In particular, an enhanced internal model control strategy, together with a feedforward action and a suitably generated reference map, is employed for the control of a vehicle equipped either with a rear wheel steering (RWS) system or with a rear active differential (RAD) device. The uncertainty arising from the wide range of operating conditions is described by an additive model set employed in the controller design. Extensive steady state and transient tests simulated with an accurate 14 degrees of freedom nonlinear model of the considered vehicle show that both systems are able to improve handling and safety in normal driving conditions. RAD devices can make the vehicle reach higher lateral acceleration values but they achieve only slight stability improvements against oversteer. On the other hand, 4WS systems can greatly improve both vehicle safety and manoeuvrability in all driving situations, making this device an interesting and powerful stability system.