基于预期偏移距离的人机权值分配策略研究

针对智能车辆横向运动控制中驾驶员和辅助系统的控制权限冲突问题,本文中提出一种人机权值分配策略。采用车辆在预瞄点处的预期偏移距离(PDLC)衡量车道偏离危险度,预期偏移距离通过对预瞄偏差修正获取。权值分配函数设计时以PDLC为自变量,以保证驾驶员的权值为优先控制目标,以一定的横向运动控制精度为先决条件。在CarSim/Simulink联合仿真平台和CarSim/Labview RT硬件在环实验台上对提出的控制策略进行了实验验证和数据分析。结果表明,采用权值分配策略协调驾驶员和辅助系统的控制,可在有效跟踪理想道路中心线的前提下保证驾驶员的控制权值,降低其工作负荷以及纠正驾驶员的误操作行为。     

基于人机共驾的车道保持辅助控制系统研究（双语出版）

车道保持控制系统是汽车安全辅助驾驶的重要组成部分，可有效提高汽车主动安全性、避免车辆无意识地偏离本车道。目前，大部分车道保持控制系统在工作时将驾驶人的操作视为外界干扰，没有考虑人机共驾阶段下驾驶人与控制系统的控制权分配问题，易造成人机冲突、影响驾驶人的驾驶感受。论文兼顾驾驶人与辅助控制系统各自优势，基于人机共驾技术对车道保持控制系统进行研究。构建基于安全行驶区域与最晚预警边界相结合的车道偏离决策模型，在保证其预警精度的同时降低计算复杂性，根据车辆行驶状态和路面附着系数动态调整预警阈值；研究串级MPC-PID控制策略实现对车辆横向位置的控制，将最优问题转化为二次规划求得目标前轮转角，利用PID算法完成对目标前轮转角的跟踪；引入共驾系数对车辆的控制权进行分配，研究共驾系数分配模型，以车辆状态误差和驾驶人转向力矩作为模糊控制的输入变量、共驾系数作为输出变量，降低辅助控制系统与驾驶人之间的冲突；最后，利用CarSim与Simulink联合仿真对所研究的控制策略进行仿真验证，结果表明共驾系数能够根据驾驶人的操作和车辆运行状态的变化实现动态调整，辅助控制力矩与驾驶人输入力矩变化趋势相同，在保留驾驶人一定操作的基础下可避免车辆偏离车道、降低人机冲突。     

车道线保持自校正滑模控制

为实现复杂工况下的车道线保持控制,建立了包含转向机构动态的车辆横向动力学模型,在此基础上研究了车辆在直道与弯道工况下的车道保持控制问题并提出一种自校正滑模控制方法.该方法引入sigmoid函数代替滑模控制中的符号函数并根据Lyapunov稳定性理论设计了自校正律,在自校正律的作用下sigmoid函数的边界层厚度以及切换...     

Lane-keeping benefits of practical rear axle steer

The classic two-degree-of-freedom yaw-plane or ‘bicycle’ vehicle model is augmented with two additional states to describe lane-keeping behaviour and further augmented with an additional control input to steer the rear axle. A simple driver model is hypothesised where the driver closes a loop on a projected lateral lane position. The driver can select the preview distance to compensate driver/vehicle dynamics, consistent with the ‘cross-over’ model found in the literature. A rear axle steer control law is found to be a function of the front axle steering input and vehicle speed that exhibits stability similar to a positive-real system, while at the same time improving the ability of the driver/vehicle system to track a complex curved lane and improving steady-state manoeuvrability. The theoretically derived control law bears similarity to practical embodiments allowing a deeper understanding of the functional value of steering a rear axle.     

A novel integrated chassis controller for full drive-by-wire vehicles

In this paper, a systematic design with multiple hierarchical layers is adopted in the integrated chassis controller for full drive-by-wire vehicles. A reference model and the optimal preview acceleration driver model are utilised in the driver control layer to describe and realise the driver's anticipation of the vehicle's handling characteristics, respectively. Both the sliding mode control and terminal sliding mode control techniques are employed in the vehicle motion control (MC) layer to determine the MC efforts such that better tracking performance can be attained. In the tyre force allocation layer, a polygonal simplification method is proposed to deal with the constraints of the tyre adhesive limits efficiently and effectively, whereby the load transfer due to both roll and pitch is also taken into account which directly affects the constraints. By calculating the motor torque and steering angle of each wheel in the executive layer, the total workload of four wheels is minimised during normal driving, whereas the MC efforts are maximised in extreme handling conditions. The proposed controller is validated through simulation to improve vehicle stability and handling performance in both open- and closed-loop manoeuvres.     

Risk management algorithm for rear-side collision avoidance using a combined steering torque overlay and differential braking

This paper describes a risk management algorithm for rear-side collision avoidance. The proposed risk management algorithm consists of a supervisor and a coordinator. The supervisor is designed to monitor collision risks between the subject vehicle and approaching vehicle in the adjacent lane. An appropriate criterion of intervention, which satisfies high acceptance to drivers through the consideration of a realistic traffic, has been determined based on the analysis of the kinematics of the vehicles in longitudinal and lateral directions. In order to assist the driver actively and increase driver's safety, a coordinator is designed to combine lateral control using a steering torque overlay by motor-driven power steering and differential braking by vehicle stability control. In order to prevent the collision while limiting actuator's control inputs and vehicle dynamics to safe values for the assurance of the driver's comfort, the Lyapunov theory and linear matrix inequalities based optimisation methods have been used. The proposed risk management algorithm has been evaluated via simulation using CarSim and MATLAB/Simulink.     

An optimal model-based trajectory following architecture synthesising the lateral adaptive preview strategy and longitudinal velocity planning for highly automated vehicle

Automated driving has received a broad of attentions from the academia and industry, since it is effective to greatly reduce the severity of potential traffic accidents and achieve the ultimate automobile safety and comfort. This paper presents an optimal model-based trajectory following architecture for highly automated vehicle in its driving tasks such as automated guidance or lane keeping, which includes a velocity-planning module, a steering controller and a velocity-tracking controller. The velocity-planning module considering the optimal time-consuming and passenger comforts simultaneously could generate a smooth velocity profile. The robust sliding mode control (SMC) steering controller with adaptive preview time strategy could not only track the target path well, but also avoid a big lateral acceleration occurred in its path-tracking progress due to a fuzzy-adaptive preview time mechanism introduced. In addition, an SMC controller with input–output linearisation method for velocity tracking is built and validated. Simulation results show this trajectory following architecture are effective and feasible for high automated driving vehicle, comparing with the Driver-in-the-Loop simulations performed by an experienced driver and novice driver, respectively. The simulation results demonstrate that the present trajectory following architecture could plan a satisfying longitudinal speed profile, track the target path well and safely when dealing with different road geometry structure, it ensures a good time efficiency and driving comfort simultaneously.     

融合预瞄与势场栅格法的紧急避撞驾驶人模型

紧急避障工况下的驾驶人操作具有响应快且动作幅值较大的特点，传统预瞄驾驶人模型已不能适应紧急避障工况的需求，故考虑实际避撞场景开发相应的驾驶人模型就显得尤为必要。针对此种状况，基于驾驶模拟器，结合紧急避撞工况实际驾驶人操纵数据，提出了一种融合预瞄与势场栅格法的紧急避撞驾驶人模型。首先针对紧急避撞工况下车辆运动特点，建立车辆横、纵向耦合非线性动力学模型，并给出其状态空间方程描述；其次，离线仿真分析紧急避撞系统特征，并结合线性二次型最优控制，建立最优曲率预瞄+跟踪误差反馈驾驶人模型；再者，基于紧急避撞工况下真实驾驶人经验转向行为数据，开发基于势场栅格法的驾驶人模型，为进一步提高驾驶人模型对避障行驶工况的适应性，将基于势场栅格法的驾驶人模型与最优曲率预瞄+跟踪误差反馈驾驶人模型进行融合，并基于Sigmoid函数实现两者输出的权重分配；最后，针对所提出的融合预瞄与势场栅格法的驾驶人模型，开展基于避撞台架的驾驶人在环仿真试验以及实车试验。研究结果表明：在紧急避撞工况下，对比最优曲率预瞄+跟踪误差反馈驾驶人模型，融合预瞄与势场栅格法的驾驶人模型输出的转向动作与实际驾驶人行为较为接近，可在保证避障安全性的前提下，兼顾避障路径跟踪精度与车辆行驶的稳定性。     

Development of a path planning system using mean shift algorithm for driver assistance

The longitudinal and lateral vehicle control techniques have been widely used in several active driver assistance systems. The adaptive cruise control, lane keeping assistant control, vehicle platooning and stop-and-go control are typical examples of the most important applications. In this study, a novel path planning method is proposed considering the driving environment such as road shape, ego vehicle and surrounding vehicles’ movement. The relative distance and velocity between the ego vehicle and surrounding vehicles are identified with respect to the predicted lane shape in front of the ego vehicle. Based on the identified information, the road shape and surrounding vehicles are mapped into the intensity image and the desired vector for the ego vehicle’s movement is determined by the maximum intensity density tracing method. The desired vehicle path is followed by the acceleration/deceleration control and the steering assist control, respectively. In order to evaluate the performance of the proposed system, simulations are conducted and compared with ACC systems.     

商用车电液复合转向系统的车道保持策略

为了提高商用车的行驶安全性,避免因驾驶人的分心驾驶出现车辆偏离车道的问题,提出一种基于电液复合转向系统的商用车车道保持策略;在建立电液复合转向系统模型、二自由度车辆模型、预瞄驾驶人模型的基础上,设计基于驾驶人在环的MPC和ADRC串级的车道保持控制策略。首先,采用MPC算法将车辆横向位置控制的最优问题转化为二次规划求得目标前轮转角;然后,考虑电液复合转向系统的不确定和干扰问题,利用ADRC算法对目标转向盘转角和实际驾驶人的转向盘转角差值以转矩信号的形式进行补偿。同时研究车道保持系统对驾驶人的干预问题,引入干预系数的概念,采用模糊控制的方法,将驾驶人手力和车辆的运动状态作为输入变量,干预系数作为输出变量,保证整车行驶安全性的前提下减小车道保持辅助系统对驾驶人的干预。最后,通过MATLAB/Simulink仿真和硬件在环试验对所设计的控制策略进行验证。研究结果表明：所设计的基于商用车电液复合转向系统的车道保持策略能够及时地纠正因驾驶人的分心驾驶而导致车辆偏离所在行驶车道的行为,特别是在弯道处出现驾驶人转向不足或过度转向的情况时,能够将车辆维持在车道线之内,保证车辆的行驶安全性,同时由于干预系数的设计,使得驾驶人也有良好的人机交互体验感。     

改进的有限时间最优预瞄横向控制器设计

提出了有限时间最优预瞄横向控制算法,根据高速公路车道保持系统实际控制要求,使用了同时考虑车辆当前偏差、预瞄点偏差和控制变量的有限时间二次型性能指标函数。运用最优跟踪算法并进行预瞄距离内曲率恒定的假设,使得控制器参数可以离线求解,保证了车辆控制的实时性。通过仿真及实车试验验证,该控制算法具有较好的跟踪效果。     

A novel direct yaw moment controller for in-wheel motor electric vehicles

A novel direct yaw moment controller is developed in this paper. A hierarchical control architecture is adopted in the controller design. In the upper controller, a driver model and a vehicle model are used to obtain the driver's intention and the vehicle states, respectively. The upper controller determines the desired yaw moment by means of sliding mode control. The lower controller distributes differential longitudinal forces according to the desired yaw moment. A nonlinear tyre model, ‘UniTire’, is utilised to develop the novel distribution strategy and the control boundary.     

无人驾驶机器人车辆非线性模糊滑模车速控制

为了实现不同行驶工况下车速的精确、稳定控制,提出一种基于非线性干扰观测器的无人驾驶机器人车辆模糊滑模车速控制方法。考虑模型不确定性和外部干扰对车速控制的影响,建立车辆纵向动力学模型。通过分析无人驾驶机器人油门机械腿、制动机械腿的结构、机械腿操纵自动挡车辆踏板的运动,建立油门机械腿和制动机械腿的运动学模型。在此基础上,分别设计油门/制动切换控制器、油门模糊滑模控制器以及制动模糊滑模控制器,并进行控制系统的稳定性分析。油门/制动切换控制器以目标车速的导数为输入来进行油门与制动之间的切换控制。油门模糊滑模控制器和制动模糊滑模控制器以当前车速以及车速误差为输入,分别以油门机械腿直线电机位移和制动机械腿直线电机位移为输出来实现对油门与制动的控制。模糊滑模控制器中,为了减少控制抖振,滑模控制的反馈增益系数由模糊逻辑进行在线调节。模糊滑模控制器中的非线性干扰观测器用于估计和补偿无人驾驶机器人车辆的模型不确定性与外部干扰。仿真及试验结果对比分析表明：本文方法能够精确地估计和补偿无人驾驶机器人车辆的模型不确定性和外部干扰,避免了油门控制与制动控制之间的频繁切换,并实现了精确稳定的车速控制。     

Road curvature estimation for vehicle lane departure detection using a robust Takagi–Sugeno fuzzy observer

In this paper, a lane departure detection method is studied and evaluated via a professional vehicle dynamics software. Based on a robust fuzzy observer designed with unmeasurable premise variables with unknown inputs, the road curvature is estimated and compared with the vehicle trajectory curvature. The difference between the two curvatures is used by the proposed algorithm as the first driving risk indicator. To reduce false alarms and take into account the driver corrections, a second driving risk indicator is considered, which is based on the steering dynamics, and it gives the time to the lane keeping. The used nonlinear model deduced from the vehicle lateral dynamics and a vision system is represented by an uncertain Takagi–Sugeno fuzzy model. Taking into account the unmeasured variables, an unknown input fuzzy observer is then proposed. Synthesis conditions of the proposed fuzzy observer are formulated in terms of linear matrix inequalities using Lyapunov method. The proposed approach is evaluated under different driving scenarios using a software simulator. Simulation results show good efficiency of the proposed method.     

Optimal preview game theory approach to vehicle stability controller design

Dynamic game theory brings together different features that are keys to many situations in control design: optimisation behaviour, the presence of multiple agents/players, enduring consequences of decisions and robustness with respect to variability in the environment, etc. In the presented methodology, vehicle stability is represented by a cooperative dynamic/difference game such that its two agents (players), namely the driver and the direct yaw controller (DYC), are working together to provide more stability to the vehicle system. While the driver provides the steering wheel control, the DYC control algorithm is obtained by the Nash game theory to ensure optimal performance as well as robustness to disturbances. The common two-degrees-of-freedom vehicle-handling performance model is put into discrete form to develop the game equations of motion. To evaluate the developed control algorithm, CarSim with its built-in nonlinear vehicle model along with the Pacejka tire model is used. The control algorithm is evaluated for a lane change manoeuvre, and the optimal set of steering angle and corrective yaw moment is calculated and fed to the test vehicle. Simulation results show that the optimal preview control algorithm can significantly reduce lateral velocity, yaw rate, and roll angle, which all contribute to enhancing vehicle stability.     

Driver models for personalised driving assistance

We propose a learning-based driver modelling approach which can identify manoeuvres performed by drivers on the highway and predict the future driver inputs. We show how this approach can be applied to provide personalised driving assistance. In a first example, the driver model is used to predict unintentional lane departures and a model predictive controller is used to keep the car in the lane. In a second example, the driver model estimates the preferred acceleration of the driver during lane keeping, and a model predictive controller is implemented to provide a personalised adaptive cruise control. For both applications, we use a combination of real data and simulation to evaluate the proposed approaches.     

In-depth understanding of lane changing interactions for in-vehicle driving assistance systems

Lane-changing events are often related with safety concern and traffic operational efficiency due to complex interactions with neighboring vehicles. In particular, lane changes in stop-and-go traffic conditions are of keen interest because these events lead to higher risk of crash occurrence caused by more frequent and abrupt vehicle acceleration and deceleration. From these perspectives, in-depth understanding of lane changes would be of keen interest in developing in-vehicle driving assistance systems. The purpose of this study is to analyze vehicle interactions using vehicle trajectories and to identify factors affecting lane changes with stop-and-go traffic conditions. This study used vehicle trajectory data obtained from a segment of the US-101 freeway in Southern California, as a part of the Next Generation Simulation (NGSIM) project. Vehicle trajectories were divided into two groups; with stop-and-go and without stop-and-go traffic conditions. Binary logistic regression (BLR), a well-known technique for dealing with the binary choice condition, was adopted to establish lane-changing decision models. Regarding lane changes without stop-and-go traffic conditions, it was identified based on the odd ratio investigation that he subject vehicle driver is more likely to pay attention to the movement of vehicles ahead, regardless of vehicle positions such as current and target lanes. On the other hand, the subject vehicle driver in stop-and-go traffic conditions is more likely to be affected by vehicles traveling on the target lane when deciding lane changes. The two BLR models are adequate for lane-changing decisions in normal and stop-and-go traffic conditions with about 80 % accuracy. A possible reason for this finding is that the subject vehicle driver has a tendency to pay greater attention to avoiding sideswipe or rear-end collision with vehicles on the target lane. These findings are expected to be used for better understanding of driver’s lane changing behavior associated with congested stop-and-go traffic conditions, and give valuable insights in developing algorithms to process sensor data in designing safer lateral maneuvering assistance systems, which include, for example, blind spot detection systems (BSDS) and lane keeping assistance systems (LKAS).     

An adaptive integrated algorithm for active front steering and direct yaw moment control based on direct Lyapunov method

In this article, an adaptive integrated control algorithm based on active front steering and direct yaw moment control using direct Lyapunov method is proposed. Variation of cornering stiffness is considered through adaptation laws in the algorithm to ensure robustness of the integrated controller. A simple two degrees of freedom (DOF) vehicle model is used to develop the control algorithm. To evaluate the control algorithm developed here, a nonlinear eight-DOF vehicle model along with a combined-slip tyre model and a single-point preview driver model are used. Control commands are executed through correction steering angle on front wheels and braking torque applied on one of the four wheels. Simulation of a double lane change manoeuvre using Matlab^®/Simulink is used for evaluation of the control algorithm. Simulation results show that the integrated control algorithm can significantly enhance vehicle stability during emergency evasive manoeuvres on various road conditions ranging from dry asphalt to very slippery packed snow road surfaces.     

An investigation on motor-driven power steering-based crosswind disturbance compensation for the reduction of driver steering effort

This paper describes a lateral disturbance compensation algorithm for an application to a motor-driven power steering (MDPS)-based driver assistant system. The lateral disturbance including wind force and lateral load transfer by bank angle reduces the driver's steering refinement and at the same time increases the possibility of an accident. A lateral disturbance compensation algorithm is designed to determine the motor overlay torque of an MDPS system for reducing the manoeuvreing effort of a human driver under lateral disturbance. Motor overlay torque for the compensation of driver's steering torque induced by the lateral disturbance consists of human torque feedback and feedforward torque. Vehicle–driver system dynamics have been investigated using a combined dynamic model which consists of a vehicle dynamic model, driver steering dynamic model and lateral disturbance model. The human torque feedback input has been designed via the investigation of the vehicle–driver system dynamics. Feedforward input torque is calculated to compensate additional tyre self-aligning torque from an estimated lateral disturbance. The proposed compensation algorithm has been implemented on a developed driver model which represents the driver's manoeuvreing characteristics under the lateral disturbance. The developed driver model has been validated with test data via a driving simulator in a crosswind condition. Human-in-the-loop simulations with a full-scale driving simulator on a virtual test track have been conducted to investigate the real-time performance of the proposed lateral disturbance compensation algorithm. It has been shown from simulation studies and human-in-the-loop simulation results that the driver's manoeuvreing effort and a lateral deviation of the vehicle under the lateral disturbance can be significantly reduced via the lateral disturbance compensation algorithm.     

基于驾驶员行为模拟的ACC控制算法

基于驾驶员最优预瞄加速度模型建立了一种适用于多种典型行驶工况的ACC控制算法。该算法采用基于多目标模糊决策方法的驾驶安全性、工效性、轻便性与合法性评价指标以及基于预瞄跟随理论的微分校正函数，描述了ACC控制系统对自由工况、跟随工况和切入工况等不同行驶条件及汽车动力学系统强非线性特性的考虑。