Simulation of Vehicle and Power Steering Dynamics Using Tire Model Parameters Matched to Whole Vehicle Experimental Results

This paper uses simulation to investigate how vehicle loading conditions (driver only, passengers, cargo, and fuel) affect power steering system and overall vehicle dynamics. Our purpose of the study was to evaluate the power steering system model for possible use in the National Advanced Driving Simulator (NADS). The effects of changing loading conditions on inertial properties of passenger cars have been found experimentally using a Vehicle Inertia Measurement Facility (VIMF). This paper presents simulation results using a vehicle handling model combined with a power steering system model and a nonlinear tire model. A crucial part of this project was the adjustment of certain parameters of Pacejka's tire model in order to match simulation results with experimental measurements of vehicle and power steering variables in transient maneuvers.     

电动助力转向系统开发平台的仿真分析

本文提出了一种基于电动伺服缸加载的电动助力转向系统实验平台,并对该实验台进行数学建模,建立了其整体仿真模型,模拟分析了车辆在实际运行中轮胎力的变化以及EPS的动态特性响应。     

4WS汽车操纵稳定性建模和仿真研究

从改善汽车操纵稳定性角度出发,全面考虑轮胎载荷、转向系等对四轮转向汽车操纵稳定性的影响,建立4WS（4 Wheel Steering System）整车操纵稳定模型。并用Matalab/simulink进行了模拟仿真研究。比较性地研究汽车在低速和高速时控制方式的特点和不同之处。本模型为4WS汽车设计改进优化提供一种手段和方法,同时,为4WS汽车理论研究和试验校核提供了参考。     

汽车操纵动力学十八自由度模型仿真研究

本文介绍了根据多刚体动力学中的凯恩方法建立的一般两轴汽车的十八自由度数学模型。     

用于电子稳定程序的汽车模型和控制策略

电子稳定程序(ElectronicStabilityProgram)是行驶车辆的一种主动安全系统,它综合了制动防抱死系统,驱动力控制系统和横摆力矩控制系统,使行驶车辆的安全性得到很大的提高。本文首先建立用于电子稳定程序的汽车模型,包括车身模型、悬架模型、转向模型、轮胎模型、制动系统模型、发动机模型和传动系模型。然后建立了主动横摆控制的控制逻辑,通过加入制动防抱死系统和牵引力控制系统,构成了电子稳定程序的控制逻辑。最后对移线运动、紧急转向、制动转向、驱动转向4个典型的工况进行仿真,从而验证了电子稳定程序控制逻辑的正确性。     

New Model of Tire Overturning Moment Characteristics and Analysis of Their Influence on Vehicle Rollover Behavior

A newly developed tire model for the Overturning Moment (OTM) characteristics and the analysis of the influence of OTM on vehicle rollover behavior are presented. The new OTM model was developed based on the so-called Magic Formula tire model. The concept of the new model involves identifying the difference between the simple model and the measurements to the newly defined functions. It was seen that the new model agrees very well with the measured data over a wide range of tire vertical loads, slip angles and camber angles. The influence of tire OTM on the vehicle rollover behavior was also investigated by using a full vehicle simulation in which a rather large steering angle was input. The results obtained from the vehicle simulation with three different tire models (model without OTM, simple model and new model) were compared with the experimental results. It was found that the calculated result obtained with the new OTM model agreed best with the experiment.     

New Model of Tire Overturning Moment Characteristics and Analysis of Their Influence on Vehicle Rollover Behavior

A newly developed tire model for the Overturning Moment (OTM) characteristics and the analysis of the influence of OTM on vehicle rollover behavior are presented. The new OTM model was developed based on the so-called Magic Formula tire model. The concept of the new model involves identifying the difference between the simple model and the measurements to the newly defined functions. It was seen that the new model agrees very well with the measured data over a wide range of tire vertical loads, slip angles and camber angles. The influence of tire OTM on the vehicle rollover behavior was also investigated by using a full vehicle simulation in which a rather large steering angle was input. The results obtained from the vehicle simulation with three different tire models (model without OTM, simple model and new model) were compared with the experimental results. It was found that the calculated result obtained with the new OTM model agreed best with the experiment.     

Tire wear estimation based on nonlinear lateral dynamic of multi-axle steering vehicle

This paper presents a novel nonlinear dynamic model of a multi-axle steering vehicle to estimate the lateral wear amount of tires. Firstly, a 3DOF nonlinear vehicle dynamic model is developed, including dynamic models of the hydropneumatic suspension, tire, steering system and toe angle. The tire lateral wear model is then built and integrated into the developed vehicle model. Based on the comparison of experimental and simulation results, the nonlinear model is proved to be better than a linear model for the tire wear calculation. In addition, the effects of different initial toe angles on tire wear are analyzed. As simulation results shown, the impact of the dynamic toe angle on the tire wear is significant. The tire wear amount will be much larger than that caused by normal wear if the initial toe angle increases to 1° - 1.5°. The results also suggest that the proposed nonlinear model is of great importance in the design and optimazation of vehicle parameters in order to reduce the tire wear.     

极限工况下主动前轮转向汽车稳定性控制

轮胎对汽车稳定性有重要影响,研究和利用轮胎的非线性特性有助于扩展汽车的稳定域。本文基于非线性轮胎模型,提出一种改进型线性时变模型预测控制(LTV-MPC)方法。该方法能扩展主动前轮转向汽车的稳定范围,提高极限工况下主动前轮转向汽车的稳定性。仿真结果表明,该方法比传统的LTV-MPC方法具有更好的稳定性控制效果。     

一种汽车ESP仿真模型的研究

基于Pacejka的"魔术公式"轮胎模型,建立了包括汽车纵向与横向移动、横摆、侧倾和4个车轮的转动的8自由度动力学模型.设计了由汽车仿真模型和驱动系统、四通道制动系统、制动踏板、转向盘与油门踏板等实物以及控制器(ESP)等部分组成的半实物仿真平台.以侧向加速度与横摆角速度为仿真控制变量对模型进行仿真测试.仿真与实车测试数据相当接近,为ESP的研究提供了有效的模型.     

汽车四轮转向非线性系统的神经网络控制

考虑了轮胎的非线性特性，引入Magic Formula建立汽车非线性力学模型，利用前向BP神经网络来辨识该非线性模型，并利用另一个神经网络进行PID参数的整定，进行离散控制系统和控制算法的设计，有效地提高了汽车四轮转向的稳定性。     

整车多体动力学模型的建立、验证及仿真分析

利用多体动力学方法建立了某轿车的整车非线性多体动力学模型,模型中考虑了前后悬架、转向系统的详细几何结构参数,以及连接处的橡胶衬套、阻尼器的非线性特性,轮胎采用M agic Formu la模型。对所建模型进行了多种试验验证,并分析了该样车的操纵稳定性等相关特性,仿真结果表明所建整车多体模型有较高的精度。     

Effects of FTP-75 mode vehicle fuel economy improvement due to types of power steering system

This paper focuses on fuel economy improvement according to the type of power steering system. Usually, a conventional power steering system is directly driven by the crankshaft of the engine with a belt, known as HPS (hydraulic power steering). However, there is some inefficiency with this system at high engine speeds. To improve this inefficiency, automobile makers have developed two power steering systems: EHPS (electro-hydraulic power steering) and MDPS (motor-driven power steering) or EPS (electric powered steering). However, there has been insufficient study of effects of the type of power steering system on fuel economy. In this paper, the effect of the type of power steering system on fuel economy is studied experimentally, and calculations of the effect on vehicle fuel economy are presenting using computer simulation with AVL cruise software. The results demonstrate that a 1% vehicle fuel economy improvement can be achieved in a vehicle with an electro-hydraulic power steering system compared to a vehicle with a hydraulic power steering system. In addition, a 1.7% vehicle fuel economy improvement can be achieved using a full electric power steering system in a FTP-75 driving cycle. These results could be used to choose a power steering system.     

汽车转向非线性平衡点求解新方法及其应用

针对汽车转向非线性稳定性平衡点确定问题,提出了求解汽车转向非线性平衡点的一种新方法。建立了汽车转向非线性2自由度模型,采用简化魔术公式轮胎模型描述非线性轮胎侧向力。给出了转向非线性平衡点的表示,对粒子群算法进行了简要分析,提出了求解转向平衡点的粒子群算法。设计了前轮转角、路面附着系数和车速分别变化的3种行驶条件,对3种行驶条件下的转向非线性平衡点进行了求解。结果表明,粒子群算法可以准确求得汽车转向非线性平衡点,适应值小于设置的10-4的精度。     

基于拓扑结构分析的整车平顺性仿真及试验研究

利用拓扑理论,对某国产轿车的整车拓扑结构进行分析,系统分析前后悬架子系统拓扑结构、转向子系统拓扑结构和动力总成拓扑结构并建立相应模型,结合Fiala轮胎模型和人椅系统模型,在ADAMS环境下建立了整车的虚拟样机,并编制随机的B级路面模型,研究在路面随机输入条件下该车的行驶平顺性。最后将该车道路试验结果与仿真结果进行对比,结果显示驾驶员座椅处垂向加速度功率谱的峰值所对应的频率一致,峰值大小略有差别,而垂向加速度功率谱变化趋势相同。     

五轴转向重型汽车转向性能的研究

以多体系统动力学理论为基础,利用ADAMS建立了五轴转向重型汽车的整车虚拟样机模型,对该模型进行了仿真分析.由分析结果可知,转向轮转角越大,轮胎磨损越严重.为提高重型汽车的灵活性,延长轮胎的使用寿命,对该模型进行了优化.通过仿真分析可知,优化后的转向性能明显提高.同时分析比较了五轴转向重型汽车与前两轴转向重型汽车的转向性能,结果表明,五轴转向重型汽车转弯半径小,轮胎磨损小.     

Modelling and Control of an Automated Vehicle

We present a vehicle model that includes the vehicle dynamics and a vehicle tire model. The model developed is then used for conducting steering analysis of an automated vehicle. We test the developed model on a step lane change maneuver and propose a model-reference based controller for remote control of a vehicle. Stability analysis of the closed-loop system using die Lyapunov approach is included.     

Analysis of Tire Effect on the Simulation of Vehicle Straight Line Motion

In the dynamic simulation of vehicle straight line motion, a vehicle model usually drifts from its intended straight path even in the case of no external input. This is particularly true when a tire model based on experimental data is used. The purpose of this paper is to provide an enhancement of a basic understanding of a tire/vehicle system behavior in the straight line motion and to identify the effect of the tire on that motion. Through the analysis of a two degrees of freedom vehicle model, tire characteristic which causes a lateral drift in the straight line motion is identified. Then the results are confirmed from vehicle test and the simulations with a more complex full-car model.     

基于驾驶人转向意图的双电机驱动电动汽车稳定性控制策略

为了使双电机驱动电动车在车辆稳定性控制过程中能够精确解读驾驶意图,使车辆实际行驶状态与驾驶意图期望的车辆行驶状态尽可能相符合,提出一种基于驾驶人意图辨识的稳定性控制策略.利用基于支持向量机递归特征消除(SVM-RFE)得到的特征参数构建基于长短期记忆(LSTM)模型的驾驶人转向意图辨识模型;基于转向意图识别结果,以方向...     

Analysis of Tire Effect on the Simulation of Vehicle Straight Line Motion

In the dynamic simulation of vehicle straight line motion, a vehicle model usually drifts from its intended straight path even in the case of no external input. This is particularly true when a tire model based on experimental data is used. The purpose of this paper is to provide an enhancement of a basic understanding of a tire/vehicle system behavior in the straight line motion and to identify the effect of the tire on that motion. Through the analysis of a two degrees of freedom vehicle model, tire characteristic which causes a lateral drift in the straight line motion is identified. Then the results are confirmed from vehicle test and the simulations with a more complex full-car model.