共查询到19条相似文献,搜索用时 187 毫秒
1.
2.
3.
附加气室空气悬架是通过在空气弹簧气室上增加一个气室,从而进一步降低空气弹簧刚度和提高阻尼的悬架。建立了附加气室空气悬架1/4二自由度系统动力学模型和数学模型,并对其进行了计算机仿真实验。通过观察仿真结果,分析了附加气室空气悬架对汽车行驶平顺性的影响因素。 相似文献
4.
5.
为了提高车辆行驶平顺性,对半主动悬架一体化减振支柱的结构进行了优化设计,推导了双气室空气弹簧数据模型,利用MATLAB/Simulink仿真工具,对新型一体式减振支柱刚度特性进行了仿真分析,为搭建半主动悬架一体化减振车辆整车性能分析提供理论。 相似文献
6.
7.
一种实时轨道移频信号的检测方法 总被引:5,自引:0,他引:5
针对轨道移频信号的频谱特点,采用欠采样技术对轨道移频信号进行非整周期的采样,经过计算机仿真实验,验证了基于非整周期采样方法对轨道移频信号进行实时傅里叶变换(FFT)分析检测的可行性,证明采样方法满足检测指标的要求。同时对其频率分辨率和实时性进行了讨论。 相似文献
8.
9.
从结构组成、工作原理及操作方面介绍了YP系列液压劈裂机。它是一种可以代替人工锤砸和风镐进行遂道维修的专利产品,适用于各种水泥混凝土构件的拆迁,并对其使用效果进行了评定。 相似文献
10.
11.
12.
13.
14.
15.
发动机排气歧管的传统设计方法已不能满足现代设计的需求,应用计算流体动力学(CFD)可以深入地了解排气歧管内部的压力和流场分布。文章利用发动机排气歧管气体流动的数学描述及排气歧管三维数值模拟及Fluent软件平台,采用k-ε湍流模型,对排气歧管内部压力和速度的分布情况进行了模拟和分析。结果表明,应用CFD来研究排气歧管和模拟其内部流动状况,计算效率高,容易实现,CFD对优化发动机排气歧管的结构设计和改善排气效果具有很好的指导意义。 相似文献
16.
C. Ruff T. Jost A. Eichberger 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2007,45(10):953-967
The commonly used 'uniform pressure method' (UP) is a well-tried method to simulate an airbag deployment in accident cases. Nevertheless, this method indicates rather heavy inadequacies at the examination of the airbag deployment in the first milliseconds. A solution is the airbag deployment calculation by using computational fluid dynamics (CFD) methods, wherein the calculated gas flow pressure may be applied 'correctly' to the airbag shell elements.
This CFD simulation is integrated in LS-Dyna with the so-called Arbitrary Lagrangian Eulerian (ALE) method and in this review the result's accuracy will be discussed. According to the FMVSS 208, an OoP model will be built-on and comparisons with simulations and tests are done. Another important detail in this labour is the airbag cover examination and the tear seam modelling, as a trivial FE modelling cannot be done due to the very fine mesh. So two possible solutions for tear seam modelling are introduced and discussed. Furthermore considerations concerning the gas generator combustion will also be revealed and an analysis about the impossibility of the direct comparison between gas generator tank test and airbag deployment will be done. At least some parameters, which take effects in the simulation, are researched and evaluated, so finally an optimised simulation model can be made available for further examinations. 相似文献
This CFD simulation is integrated in LS-Dyna with the so-called Arbitrary Lagrangian Eulerian (ALE) method and in this review the result's accuracy will be discussed. According to the FMVSS 208, an OoP model will be built-on and comparisons with simulations and tests are done. Another important detail in this labour is the airbag cover examination and the tear seam modelling, as a trivial FE modelling cannot be done due to the very fine mesh. So two possible solutions for tear seam modelling are introduced and discussed. Furthermore considerations concerning the gas generator combustion will also be revealed and an analysis about the impossibility of the direct comparison between gas generator tank test and airbag deployment will be done. At least some parameters, which take effects in the simulation, are researched and evaluated, so finally an optimised simulation model can be made available for further examinations. 相似文献
17.
18.
通过数值模拟和试验验证,分析了歧管式催化器内部气流的速度场、压力场和气流分布状态,并与常规的底盘下催化器进行了比较.结果表明:随入口流量的增大,歧管式催化器内部气流流速增大、压力损失增大、径向分布均匀性降低;气流的径向分布不同于常规催化器集中于轴线的轴对称形式,而是在载体前端面呈比较分散的状态,其中管板复合型歧管式催化... 相似文献
19.
直喷式柴油机进气道稳流试验台参数的测定 总被引:2,自引:0,他引:2
测量模拟气缸内的涡流转速有叶片风速仪和动量计2种方法。利用2气门6110柴油机进气道石膏芯盒进行了试验研究。在使用叶片式风速仪测量模拟气缸内的涡流转速时,分析叶片形状、安置位置可能带来的影响;在一般使用的“定压差法”稳流试验中,从气体流动满足完全发展湍流状态的理论出发,分析了确定模拟气缸内压差值的估算公式。 相似文献