共查询到20条相似文献,搜索用时 203 毫秒
1.
甚低频水下全向数字接收技术 总被引:2,自引:0,他引:2
提出一种可以用微机软件来完成的甚低频水下通信全向接收新方法,在完成数字化全向接收理论推导的基础上,完成计算机仿真,仿真结果证明原理正确,工程设计简单。还从理论和仿真试验两方面进一步证明,可以用软件来代替整个甚低频水—卜接收机的主要硬件,从而使复杂的二级模拟超外差接收电路、模拟鉴相电路等全部简化。用相关原理研制的数字化甚低频全向接收机将在性能、可靠性等各方面都会有很大提高。 相似文献
2.
3.
4.
宽带多普勒声纳采用重复相位编码信号和复协方差算法,相对于窄带技术大大提高了测量精度。论文分析了宽带多普勒声纳的系统结构和工作原理,介绍了复协方差方法,通过对湖试数据的分析,研究了多普勒声纳接收到的信号特性,分析了时域波形和包络,指出了回波首先以混响为主,经过一定的延时后接收的信号以限带白噪声为主;分析了海底回波的幅度特征并采用滑动谱矩估计分析了接收的整个时域信号的速度特征。分析了噪声的概率密度和功率谱,并与高斯白噪声比较,得到宽带多普勒声纳接收到的噪声近似服从高斯分布的结论。 相似文献
5.
6.
本文提出一种螺旋双锥体积阵宽带恒定束宽波束形成方法。在远场条件下,依据信号源和阵元的位置信息,给出了螺旋双锥体积阵接收信号模型,将阵列响应向量表示成以Bessel函数为核函数的形式。确定参考频率,将宽带划分成多个子带,使得子带内各频率分量上的波束图与参考频率上的波束图一致。本文提出的宽带恒定束宽波束形成方法能有效地运用到螺旋双锥体积阵处理宽带信号中。采用螺旋双锥体积阵接收处理宽带信号,解决了垂直线阵、矢量水听器和平面阵的各种局限,更有利于实现宽频带信号处理。 相似文献
7.
8.
9.
10.
11.
《船舶与海洋工程学报》2014,(2)
正In the paper"Influence of Fouling Assemblage on the Corrosion Behaviour of Mild Steel in the Coastal Waters of The Gulf of Mannar,India"in Vol.12,No.4,Page:509,References were lost,and the two authors’biographies were identical.The correct text is shown below.We apologize to the authors and our readers for any inconvenience caused by the errors. 相似文献
13.
《船舶与海洋工程学报》2014,(4)
正St.John's,Newfoundland,Canada,May 31-June 5,2015 OMAE2015 is the ideal forum for researchers,engineers,managers,technicians and students from the scientific and industrial communities from around the world to: meet and present advances in technology and its scientific support; 相似文献
14.
联合作战计划和执行系统 总被引:2,自引:1,他引:1
全球指挥控制系统(GCCS)实施当前美国海军网络中心战信息基础设施的联合计划网络。联合作战计划和执行系统(JOPES)支持GCCS实现联合计划。JOPES有两类计划:时间不限的精密预案计划生成作战计划、方案计划或职能计划;时间敏感的危机行动计划生成作战命令或战役方案。前者在和平时期创建的作战计划是后者的计划基础,加速应付危机的能力。 相似文献
15.
In terms of equal sailing distances, where is the inflexion when ships depart from ports in the Asian Continent to New York via Suez and/or Panama?
The answer is China South Port Group (Hong Kong, Shenzhen and Guangzhou). 相似文献
The answer is China South Port Group (Hong Kong, Shenzhen and Guangzhou). 相似文献
16.
Recent measurements of wave induced hull strain and flexure in RN warships are presented together with the derivation of the current design criteria for extreme hull girder bending loads. The history of the development of the shipboard instrumentation used is given and recent developments to improve the quality and ease of analysis of the data are described. An unexpectedly high transverse asymmetry in the longitudinal strains measured in destroyers is shown to be the result of a combination of vertical and lateral bending in oblique seas. Finally recent theoretical comparisons between the loading of Deep-Vee hulls and conventional UK rounded bilge hulls are presented which demonstrate the higher loading experienced by this type of hull form. 相似文献
17.
桥梁防撞设施物理模型试验 总被引:1,自引:0,他引:1
物理模型试验是预报防撞设施所受撞击力及优化设计方案的主要方法之一。结合杭州湾大桥柔性防撞设施及东海大桥独立式防撞体设计方案,阐述了船—防撞体撞击试验的基本原理、方法、试验方案及相关试验结果。提出了柔性防撞系统的优化方案。试验结果表明,该方案经济有效,可供预报类似桥梁防撞设施撞击力时参考。 相似文献
18.
印尼某电厂项目码头水工建筑物包括码头、防波堤和护岸等主要组成部分。在该项目水工建筑物的设计过程中,综合考虑当地的自然条件、施工能力和材料来源等因素,不断优化结构选型和结构断面。根据不同使用要求,护岸分别采用直立式和斜坡式2种结构型式,推荐的设计方案节省投资、施工方便,可供同类工程设计参考。 相似文献
19.
20.