共查询到20条相似文献,搜索用时 46 毫秒
1.
2.
3.
4.
5.
销轴拆卸器的研制成功。填补了销轴拆卸器使用千斤顶通过销轴拆卸器的上、下支承部分使用拔出力拆卸销轴的空白。实践证明该装置操作使用方便,简单可靠,它不但具有新颖性、创造性、实用性,而且可操作、可靠性好,拆销轴时的拔出力操作者可观察、可控制。达到了研制设计的要求。(附图) 相似文献
6.
电磁轨道发射装置结构动力学特性分析 总被引:1,自引:0,他引:1
以新概念的电磁轨道发射装置为研究对象,从建立其动力学模型入手,将电磁轨道装置简化为一固定在弹性支撑上的无限长Bernoulli-Euler梁,通过适当理论假设,提出其通用动力学方程,利用傅里叶变换求解动力学方程,得到了电磁轨道装置的临界速度和导轨的动力学特性理论公式,最后应用有限元分析软件仿真了电枢速度、轨道弹性模量、轨道密度、轨道截面转动惯量、支撑座弹性系数等参数对导轨动力学特性的影响.仿真结果显示,电枢临界速度时导轨变形最大.研究成果可为电磁轨道装置的结构设计和减振控制提供进一步的理论支撑. 相似文献
7.
"海洋石油686"轮采用了法国的可累佩尔公司Ful-46-LTC-1386型艏侧推器,该侧推器是由电力驱动的液压伺服变距式。文章介绍了该装置的各部分组成和功能,对常见的螺距控制无响应故障现象进行了分析,并给出了有效的处理措施。 相似文献
8.
9.
<正>传统的电气控制系统主要包含逻辑控制部分(PLC)、驱动控制部分(变频器,电机)、上位机(CMS)等组成。西门子在传统的解决方案之上,创新的加Simotion系统,Simotion是一个全新的西门子运动控制系统,它是世界上第一款针对复杂工艺和精确控制机械而设计的控制系统。现今设备机械运动越来越复杂,对速度及精度的要求也越来越高,自动化要求也越来越高,Simotion正是针对复杂运动控制而推出的全新运动控制系统,将运动控制,逻辑控制及工艺控制功能集 相似文献
10.
11.
《船舶与海洋工程学报》2014,(2)
正In the paper"Influence of Fouling Assemblage on the Corrosion Behaviour of Mild Steel in the Coastal Waters of The Gulf of Mannar,India"in Vol.12,No.4,Page:509,References were lost,and the two authors’biographies were identical.The correct text is shown below.We apologize to the authors and our readers for any inconvenience caused by the errors. 相似文献
13.
《船舶与海洋工程学报》2014,(4)
正St.John's,Newfoundland,Canada,May 31-June 5,2015 OMAE2015 is the ideal forum for researchers,engineers,managers,technicians and students from the scientific and industrial communities from around the world to: meet and present advances in technology and its scientific support; 相似文献
14.
联合作战计划和执行系统 总被引:2,自引:1,他引:1
全球指挥控制系统(GCCS)实施当前美国海军网络中心战信息基础设施的联合计划网络。联合作战计划和执行系统(JOPES)支持GCCS实现联合计划。JOPES有两类计划:时间不限的精密预案计划生成作战计划、方案计划或职能计划;时间敏感的危机行动计划生成作战命令或战役方案。前者在和平时期创建的作战计划是后者的计划基础,加速应付危机的能力。 相似文献
15.
In terms of equal sailing distances, where is the inflexion when ships depart from ports in the Asian Continent to New York via Suez and/or Panama?
The answer is China South Port Group (Hong Kong, Shenzhen and Guangzhou). 相似文献
The answer is China South Port Group (Hong Kong, Shenzhen and Guangzhou). 相似文献
16.
Recent measurements of wave induced hull strain and flexure in RN warships are presented together with the derivation of the current design criteria for extreme hull girder bending loads. The history of the development of the shipboard instrumentation used is given and recent developments to improve the quality and ease of analysis of the data are described. An unexpectedly high transverse asymmetry in the longitudinal strains measured in destroyers is shown to be the result of a combination of vertical and lateral bending in oblique seas. Finally recent theoretical comparisons between the loading of Deep-Vee hulls and conventional UK rounded bilge hulls are presented which demonstrate the higher loading experienced by this type of hull form. 相似文献
17.
桥梁防撞设施物理模型试验 总被引:1,自引:0,他引:1
物理模型试验是预报防撞设施所受撞击力及优化设计方案的主要方法之一。结合杭州湾大桥柔性防撞设施及东海大桥独立式防撞体设计方案,阐述了船—防撞体撞击试验的基本原理、方法、试验方案及相关试验结果。提出了柔性防撞系统的优化方案。试验结果表明,该方案经济有效,可供预报类似桥梁防撞设施撞击力时参考。 相似文献
18.
印尼某电厂项目码头水工建筑物包括码头、防波堤和护岸等主要组成部分。在该项目水工建筑物的设计过程中,综合考虑当地的自然条件、施工能力和材料来源等因素,不断优化结构选型和结构断面。根据不同使用要求,护岸分别采用直立式和斜坡式2种结构型式,推荐的设计方案节省投资、施工方便,可供同类工程设计参考。 相似文献
19.
20.