共查询到20条相似文献,搜索用时 78 毫秒
1.
针对在球鼻艏减阻优化设计循环中手动建模方法无法满足需要的问题,提出了利用软件Grasshopper开发一种新的参数化球鼻艏生成可自动变形的球鼻艏的方法。该方法首先定义了球鼻和主船体之间的过渡区域,通过过渡区域的自由变形,实现了球鼻与主船体的光顺连接。然后实现生成的球鼻艏可以根据输入参数的变化自动修改形状。最后将该方法应用在一艘集装箱船体上。结果表明:该方法可以高效地应用于商业船舶的参数化球鼻艏建模。 相似文献
2.
3.
本文以某型船球鼻艏BB分段首次实现数控放样为例,就运用KCS建模,推进船体造船系统辅助设计放样完成球鼻首线型三相光顺,改变传统手工放样模式作了初步阐述。 相似文献
4.
文章着眼于球鼻艏设计,提出一种球鼻艏几何形状的插值表达方法,把球鼻艏的设计参数减少至5个,提出采用多岛遗传算法数值优化兴波阻力的球鼻艏设计方法。最后,对KCS船的球鼻艏进行了优化设计,结果显示,其兴波阻力较原方案降低了10%,初步验证了该设计方法的有效性。 相似文献
5.
6.
7.
8.
9.
大伸出上翘型球鼻在一艘小方形系数船上的应用 总被引:1,自引:0,他引:1
某海洋调查船要在原线型上增添一球鼻艏。从安装维修横隧道型艏推装置,降低船阻力和确保艏部流线光顺流畅不产生气泡等方面推荐采用大伸出上翘型球鼻艏。经船模水池试验验证,该鼻达到了预期效果。现此方案已赋于实施。 相似文献
10.
《船舶标准化工程师》2017,(1)
文章描述了一种艏侧推管端部外板外部船体的加强结构。艏侧推外部加强结构对应于船舶的艏侧推管开口的外部设置,艏侧推开口内设置有侧推管。该艏侧推外部加强结构包括包笼板和包围艏侧推开口,并与侧推管以及船舶的主船体外板焊接,形成一腔式密闭空间,并具有与船舶艏部流线型一致的光顺线型体外型;还包括过渡板和内部加强肋板等。该新型艏侧推外部加强结构可有效地降低艏侧推开口对船体结构的削弱。 相似文献
11.
《船舶与海洋工程学报》2014,(2)
正In the paper"Influence of Fouling Assemblage on the Corrosion Behaviour of Mild Steel in the Coastal Waters of The Gulf of Mannar,India"in Vol.12,No.4,Page:509,References were lost,and the two authors’biographies were identical.The correct text is shown below.We apologize to the authors and our readers for any inconvenience caused by the errors. 相似文献
13.
《船舶与海洋工程学报》2014,(4)
正St.John's,Newfoundland,Canada,May 31-June 5,2015 OMAE2015 is the ideal forum for researchers,engineers,managers,technicians and students from the scientific and industrial communities from around the world to: meet and present advances in technology and its scientific support; 相似文献
14.
联合作战计划和执行系统 总被引:2,自引:1,他引:1
全球指挥控制系统(GCCS)实施当前美国海军网络中心战信息基础设施的联合计划网络。联合作战计划和执行系统(JOPES)支持GCCS实现联合计划。JOPES有两类计划:时间不限的精密预案计划生成作战计划、方案计划或职能计划;时间敏感的危机行动计划生成作战命令或战役方案。前者在和平时期创建的作战计划是后者的计划基础,加速应付危机的能力。 相似文献
15.
In terms of equal sailing distances, where is the inflexion when ships depart from ports in the Asian Continent to New York via Suez and/or Panama?
The answer is China South Port Group (Hong Kong, Shenzhen and Guangzhou). 相似文献
The answer is China South Port Group (Hong Kong, Shenzhen and Guangzhou). 相似文献
16.
桥梁防撞设施物理模型试验 总被引:1,自引:0,他引:1
物理模型试验是预报防撞设施所受撞击力及优化设计方案的主要方法之一。结合杭州湾大桥柔性防撞设施及东海大桥独立式防撞体设计方案,阐述了船—防撞体撞击试验的基本原理、方法、试验方案及相关试验结果。提出了柔性防撞系统的优化方案。试验结果表明,该方案经济有效,可供预报类似桥梁防撞设施撞击力时参考。 相似文献
17.
印尼某电厂项目码头水工建筑物包括码头、防波堤和护岸等主要组成部分。在该项目水工建筑物的设计过程中,综合考虑当地的自然条件、施工能力和材料来源等因素,不断优化结构选型和结构断面。根据不同使用要求,护岸分别采用直立式和斜坡式2种结构型式,推荐的设计方案节省投资、施工方便,可供同类工程设计参考。 相似文献
18.
19.
20.
Recent measurements of wave induced hull strain and flexure in RN warships are presented together with the derivation of the current design criteria for extreme hull girder bending loads. The history of the development of the shipboard instrumentation used is given and recent developments to improve the quality and ease of analysis of the data are described. An unexpectedly high transverse asymmetry in the longitudinal strains measured in destroyers is shown to be the result of a combination of vertical and lateral bending in oblique seas. Finally recent theoretical comparisons between the loading of Deep-Vee hulls and conventional UK rounded bilge hulls are presented which demonstrate the higher loading experienced by this type of hull form. 相似文献