Logistical restructuring and road freight traffic growth

The forecasting of road freight traffic has relied heavily on the close correlation between GDP and road tonne-kilometers. It has not been rooted in an understanding of the causes of freight traffic growth. The research reported in this paper has investigated this process of traffic growth in two ways: first, by analysing official data on the production, consumption and movement of food and drink products, and second, by conducting a survey of the changing freight transport requirements of 88 large British-based manufacturers.The analysis of secondary data shows how, in the food and drink sector, the relationship between the real value of output and road vehicle-kms hinges on four key parameters: value density, handling factor, average length of haul and consignment size. An attempt is made to explain variations in these parameters.The survey of manufacturers suggests that the growth of lorry traffic is the net result of a complex interaction between factors operating at four levels of logistical management: strategic planning of logistical systems, choice of suppliers and distributors, scheduling of product flow and the management of transport resources. Changes in the frequency and scheduling of freight deliveries in response to tightening customer service requirements and just-in-time management appear to have become a more prevalent cause of freight traffic growth than the physical restructuring of logistical systems. Manufacturers anticipate that their road freight demand will broadly increase in line with sales and be largely unaffected by road transport cost increases at the levels currently proposed. The paper concludes by examining their likely reactions to a much sharper increase in the cost of road freight movement.     

Repeatability & reproducibility: Implications of using GPS data for freight activity chains

As transport modellers we are interested in capturing the behaviour of freight vehicles that includes the locations at which vehicles perform their activities, the duration of activities, how often these locations are visited, and the sequence in which they are visited. With disaggregated freight behaviour data being scarce, transport modellers have identified vehicle tracking and fleet management companies as ideal third party sources for GPS travel data. GPS data does not provide us with behavioural information, but allows us to infer and extract behavioural knowledge using a variety of processing techniques. Many researchers remain sceptical as specific human intervention, referred to as ‘expert knowledge’, is often required during the processing phase: each GPS data set has unique characteristics and requires unique processing techniques and validation to extract the necessary behavioural information. Although much of the GPS data processing is automated through algorithms, human scrutiny is required to decide what algorithmic parameters as considered ‘best’, or at least ‘good’. In this paper we investigate the repeatability and reproducibility (R&R) of a method that entails variable human intervention in processing GPS data. More specifically, the judgement made by an observer with domain expertise on what clustering parameters applied to GPS data best identify the facilities where commercial vehicles perform their activities. By studying repeatability we want to answer the question ‘if the same expert analyses the GPS data more than once, how similar are the outcomes?’, and with reproducibility we want to answer the question ‘if different experts analyse the same GPS data, how similar are their outcomes?’ We follow two approaches to quantify the R&R and conclude in both cases that the measurement system is accurate. The use of GPS data and the associated expert judgements can hence be applied with confidence in freight transport models.     

Determinants of modal choice in freight transport

In the next few years, exciting developments in the field of freight transport are likely to occur. The Channel Tunnel will be perceived as giving railways much greater distance of operation, compared to the current train ferry to/from Great Britain. The further development of swap-body technology will allow easier modal transfer and the creation, in 1992, of a single market in Europe will transform the pattern of trade. All of these are likely to have significant impacts on modal choice, and hence modal split, in freight transport. Reappraisal by many firms of the modes of transport used is likely but will it result in a net transfer of freight from road to rail and, if so, to what extent? To answer such questions, an accurate and reliable method of predicting modal split is required. Research in the past has concentrated on the development of modal split models based on generalised costs. These fail to explain adequately the prevalence of road freight in the UK. From surveys of freight managers within industry, it is clear that models to date rely too heavily on the economic cost factor and too little on behavioural factors (Jeffs 1985). This paper derives from a recent study of freight transport modal choice from the standpoint of the transport decision-maker within the firm. It attempts to shed light on the actual parameters which should be incorporated into a modal split model. Many variables appear to exert an influence on modal choice decision-making process. However, it is possible to categorise them into six main groups, namely: customer-requirements; product-characteristics; company structure/organisation; government interventions; available transport facilities; and perceptions of the decision-maker him/herself. It is the interactions and inter-relationships between these which ultimately determine freight modal split. This study has shown that the relationship between the outcome of the transport decision process and the values of particular determinants of modal split is not straight-forward, due to the complexity and variety of interactions involved. Perhaps one of the main reasons for researchers' failure hitherto to develop a successful modal-split model has been the preoccupation with techniques that rely on the development of common metric (e.g. generalised cost), which has led to the exclusion of some important explanatory variables along quite different dimensions. Another important issue concerns the appropriate level of aggregation. In order not to reduce the explanatory power of the key variables, it is important to work at a disaggregate level, although this does make substantial demands on data. The use of factor analysis enables both the aggregation of information without loss of behavioural reality and the specification of variables in terms of a common metric. In conclusion, freight transport has usually been examined within too narrow a framework. It must be placed firmly within the context of the total industrial process. The demand for freight transport is directly influenced by the level, composition and geographical distribution of production and consumption activities. Freight flows are complex and so it is highly unlikely that a universal mode-choice model can ever be developed. Future research should, therefore, be directed towards developing partial models in response to specific needs of those involved in decision-taking in the freight sector.     

Generic Framework for Transport Network Designs: Applications and Treatment in Intermodal Freight Transport Literature

Abstract

Six principles for the design of transport systems are described, including direct link, corridor, hub‐and‐spoke, connected hubs, static routes, and dynamic routes. The designs are theoretically discussed, defining the operational character of each design and their application in passenger, freight and rail freight transport. The theory is then applied to intermodal freight transport by comparing the terminology used in the paper with that in the scientific literature. The advantages of using a generic terminology over contextual ones are identified from the perspectives of researchers, commercial operators and policy‐makers.     

Stakeholder-specific data acquisition and urban freight policy evaluation: evidence,implications and new suggestions

Cities, characterised by scarce resources and facing increasing citizens’ requests for more liveable and attractive environments, need to define and implement more efficient urban freight transport policy interventions. It is strategically relevant to perform an ex-ante in-depth policy evaluation. The paper aims at investigating the relevance, the needs and the implications of the data acquisition process by combining a focused review with an original research study. It critically compares five categories of methodological approaches adopted for policy evaluation purposes with an explicit focus on the stated preference method given its behavioural peculiarity and robustness. The review, following a systematic procedure where scientific quality is complemented by relevance and coverage, underlines a high variability in the level of sophistication for data acquisition. While a stakeholder-specific approach seems natural in all those cases where local authorities want to adopt distinct policy instruments for each stakeholder, this is also needed when homogeneous policies impacting the various stakeholders are tested. Stakeholder-specific data acquisition translates into the creation of multiple experimental designs, explicitly conceived for each stakeholder considered. A case study, intended to compare two alternative strategies for data acquisition, provides a quantitative measure of potential distortions in policy evaluation due to the adoption of a stakeholder-generic approach. Results, in terms of willingness to pay measures, show that a stakeholder-specific approach is needed not only when modelling but also in the data acquisition process.     

Exchange rate and transport cost sensitivities of bilateral freight flows between the US and China

This paper explores the long-run impacts of gross domestic product, exchange rate, and transport costs on bilateral air and ocean freight flows between the US and China. The study employs a cointegration framework by using export and import data over the period of 2003:Q1-2014:Q2. Results show that gross domestic product is the key determinant of bilateral freight flows, indicating that real income of a trading partner is a driving force of the bilateral freight flows between the US and China. In examining the sensitivities of the bilateral trade flows, air freight flows are found to be more responsive to a real income change than ocean freight flows. The bilateral exchange rate is a significant factor affecting the freight flows from China to the US, suggesting that a US dollar appreciation against the Chinese yuan increases the inflows of Chinese commodities to the US. The impacts of the bilateral exchange rate and transport cost are found to vary at industry and commodity levels. These findings support the importance of employing disaggregate data in the bilateral freight flow analysis.     

Shift of reference point and implications on behavioral reaction to gains and losses

It is widely recognized that individual decision-making is subject to the evaluation of gains and losses around a reference point. The estimation of discrete choice models increasingly use data from stated choice experiments which are pivoted around a reference alternative. However, to date, the specification of a reference alternative in transport studies has been fixed, whereas it is common to observe individuals adjusting their preferences according to a change in their reference point. This paper focuses on individual reactions, in a freight choice context, to a negative change in the reference alternative values, identifying the behavioural implications in terms of loss aversion and diminishing sensitivity. The results show a significant adjustment in the valuation of gains and losses around a shifted reference alternative. In particular, we find an average increase in loss aversion for cost and time attributes, and a substantial decrease for punctuality. These findings are translated to significant differences in the willingness to pay and willingness to accept measures, providing supporting evidence of respondents’ behavioural reaction.     

Second international conference on new survey methods in transport Hungerford Hill,Australia 12–16 September 1983

The Second International Conference on New Survey Methods in Transport was held at Hungerford Hill, Australia in September 1983. The aims of the conference were to provide a focus for discussion of survey methodology and to establish bench‐marks with respect to the state of the art in various facets of transport surveys. The conference evolved around workshops in twelve key areas: sample design, survey needs for modelling, questionnaire design and piloting, perceptual studies, diary surveys, longitudinal studies, interactive survey methods, freight surveys, traffic surveys, total design concepts, response errors and data correction, and coding and computing.

A number of plenary keynote papers were also presented describing the state of the art in cross‐sectional, longitudinal and interactive survey methods. Emerging from the conference discussions, six key issues were prominent; the gap between the state of the art, as espoused by researchers, and the state of practice, as employed by practioners; the differences in results obtained when employing different survey methods to collect essentially the same data; the emerging use of the telephone for the conduct of interview travel surveys; the interaction between survey methods and demand modelling and the disparate levels of sophistication in the two areas; the role of microcomputers in the design, conduct and analysis of transport surveys; and the need for practitioners to engage in controlled experimentation, so that methodological advances may continue to be made in the field of transport surveys.     

Modelling mode choice for freight transport using advanced choice experiments

In this paper we use advanced choice modelling techniques to analyse demand for freight transport in a context of modal choice. To this end, a stated preference (SP) survey was conducted in order to estimate freight shipper preferences for the main attributes that define the service offered by the different transport modes. From a methodological point of view, we focus on two critical issues in the construction of efficient choice experiments. Firstly, in obtaining good quality prior information about the parameters; and secondly, in the improved quality of the experimental data by tailoring a specific efficient design for every respondent in the sample.With these data, different mixed logit models incorporating panel correlation effects and accounting for systematic and random taste heterogeneity are estimated. For the best model specification we obtain the willingness to pay for improving the level of service and the elasticity of the choice probabilities for the different attributes. Our model provide interesting results that can be used to analyse the potential diversion of traffic from road (the current option) to alternative modes, rail or maritime, as well as to help in the obtaining of the modal distribution of commercial traffic between Spain and the European Union, currently passing through the Pyrenees.     

Freight transportation demand: A survey of recent econometric studies

This paper surveys econometric studies of freight transportation demand which have been published since the mid-1970s. It describes the variables, data sources, and estimation procedures utilized by the studies. In addition, it summarizes their statistical results. The studies included in this survey typically accounted for freight rates and service characteristics (e.g., transit time and reliability). Data sources often varied across the studies.Based on the data they utilized, the surveyed studies are classified as either aggregate or disaggregate. The data in the aggregate studies consist of information on total flows by modes at the regional or national level, while the data in the disaggregate studies pertain to individual shipments. The earlier aggregate studies estimated linear logit models. It has been pointed out that when they are estimated on aggregate data these models are subject to certain shortcomings. To avoid these shortcomings, more recent aggregate studies have estimated flexible forms such as translog functions. The disaggregate studies surveyed in this paper used either logit or probit models.Statistical results often varied with the commodities analyzed, making it somewhat difficult to generalize the findings of the different studies. One finding common to several studies is that freight rates have a significant impact on shipment decisions. This paper discusses certain theoretical and empirical limitations of the surveyed studies. It also offers suggestions for future research in freight transport demand. Freight demand models can be used to examine various effects of the recent deregulation in freight transportation.     

Impacts of combining partial and general equilibrium modelling in freight transport analyses – a forest sector case study from Norway

Abstract

The forest sector in Norway is very transport intensive, accounting for approximately 14% of total domestic freight transport traffic on Norwegian roads. This paper presents an analysis linking a general equilibrium freight transport modelling tool with a partial equilibrium model of the forest sector. The freight transport model predicts transport costs, modal split and transport patterns, and the results are treated as inputs to the forest sector model. The objective of the paper is to analyse the modelling effect of taking forest sector model effects back into the freight transport model and treated as new demand. Compared to a base scenario for the year 2020, we compare analyses with and without this new demand from the forest sector model back into the freight transport modelling tool.     

城市地面交通方式单位能耗水平对比

为获得城市内不同交通方式的单位能耗水平,利用交通运输能耗统计监测平台抽样统计相关数据,设计算法分析单位生产任务能耗水平。在分析城市交通方式能耗统计障碍基础上,设计抽样方案、划分分类方法;设计数据分析算法分析已获数据,利用实验对统计数据进行修正,获得私家车、出租车、公交车等交通方式单位生产任务能耗水平。结果表明,由于道路客货运生产和管理现状,基于多源能耗影响因素的统计难以实现,导致生产能耗水平没有基准。依据行业分类方法,结合前期数据调研下的当量换算,可以确定可信度较高的单位生产能耗阈限,为行业发展提供依据。     

Comparison of road freight transport trends in Europe. Coupling and decoupling factors from an Input–Output structural decomposition analysis

Decoupling road freight transport from economic growth has been acknowledged by the European Union as a key means to improving sustainability. It is therefore important to identify both the coupling and decoupling drivers of road freight transport demand in order to determine possible factors that may contribute to reduce road transport in the future without curbing economic development. This research proposes an Input–Output (IO) structural decomposition analysis (SDA) to explain road freight transport in terms of a set of key factors that have strongly influenced road freight demand in recent decades in European countries—such as economic growth, economic structure and the evolution of road transport intensity (including improvements in both supply and transport systems). This methodological approach allows us to quantify and compare their contribution in different European countries to either increase or decrease road freight transport demand. The empirical basis for this analysis is a dataset of nine European countries which have IO tables and road transport data available from 2000 to 2007, comprising data on domestic production, imports and exports as well as tonne-kms for 11 types of commodity classes. The results show that, as a whole, aggregate road transport demand has grown—driven mainly by economic activity—but this growth has been strongly curbed in some countries by changes in road freight transport intensity and moderately by the dematerialization of the economy. International transport has been also proven to be a key factor driving road freight transport volumes. Moreover, the increased penetration of foreign operators in national haulage markets appears to have reinforced the final decoupling levels observed in some cases.     

An analysis of rail freight operational efficiency and mode share in the British port-hinterland container market

The growth in container shipping poses considerable challenges to efforts to reduce the negative externalities associated with freight transport. There are particular concerns about the impacts of the associated port-hinterland freight flows. Through empirical research, this paper examines trends in the operational efficiency of the British port-hinterland container rail freight market and to assess the impacts of any changes on the overall sustainability of this market. Original survey work conducted in 2007 and 2015 has allowed longitudinal and cross-sectional analysis of the characteristics of this market.The survey findings reveal that rail’s mode share of port container throughput (in TEU) has increased from 14.7% in 2007 to 16.6% in 2015 and it is likely that its share of the associated hinterland activity has also risen. Rail was carrying 25% more TEU by 2015 without an increase in train service provision. Increases in mean train capacity and mean load factor were observed, leading to growth in the mean train load from 44 TEU in 2007 to 55 TEU in 2015. This considerable improvement in operational efficiency is expected to have reduced the negative externalities per unit of transport activity associated with the rail-borne hinterland container flows, though scope is identified for further improvements in sustainability.     

Evaluation of Rail Freight Facilities Grant Funding in Britain

Abstract

Rail freight has been generally in decline in many European Union countries in recent years, contrary to European transport policy. State support for railway operations is commonplace in most countries, and this paper establishes the background to targeted rail freight grant funding in Britain. Through desk‐based analysis of Freight Facilities Grant (FFG) awards, together with a survey of recipient companies, the paper assesses the extent to which the planned flows expected from these awards have materialized and it evaluates the role of the grants in influencing rail freight volumes. The evidence suggests that FFG funding has been largely successful, attracting considerable private sector investment. Overall, FFGs have played an important role in developing or retaining rail freight flows, although the processes could be made more transparent and consistent. As other European countries liberalize their rail freight markets as a result of European Union legislation, such targeted funding may be an appropriate alternative to more general government subsidy of freight operations.     

Investigating the market for inter-modal freight technologies

Freight carried by rail has traditionally been mainly low value bulk commodities. The market for transport of such commodities appears at best static and is forming a smaller proportion of the total demand for freight transport. There is thus an urgent need for rail operators to develop practical and cost effective inter-modal systems, which offer high quality services to consignors of consumer goods whose premises are not usually connected to the rail network. Much long-haul traffic of this type is international. In continental Europe, a number of inter-modal technologies—including swapbodies and piggyback—have long been in use. Development of similar technologies for use within the more constrained loading gauge of Great Britain, has received a great boost from the impending opening of the Channel Tunnel. The alternative technologies are discussed, before turning to ways of stimating the market for them. A large part of the paper is devoted to reporting on a computerised survey using our LASP (Leeds Adaptive Stated Preference) technique. The reason for using hypothetical Stated Preference data is the inadequate nature and extent of data on actual choice decisions, particularly in circumstances in which confidential freight rates are individually negotiated and little general merchandise goes by rail. By bringing together the results of this survey with information on costs and quality of service, the likely future market for inter-modal freight technologies is assessed. It is seen that the potential for inter-modal services within Britain is very limited, although there should be a good opportunity on the major corridor from London to Scotland through the West Midlands and the North West. When the Channel Tunnel is opened, however, the potential for services between Britain and continental Europe will be enormous, provided that an adequate quality of service can be offered.     

Incorporating Logistics in Freight Transport Demand Models: State-of-the-Art and Research Opportunities

Freight transport demand is a demand derived from all the activities needed to move goods between locations of production to locations of consumption, including trade, logistics and transportation. A good representation of logistics in freight transport demand models allows us to predict the effects of changes in logistics systems on future transport flows. As such it provides better estimations of the costs of interaction and allows to predict changes in spatial patterns of freight transport flows more accurately. In recent years, the attention for freight modelling has been growing and new research work has appeared aimed at incorporating logistics in freight models. In this paper we review the state of the art in the representation of logistics considerations in freight transport demand models. Our focus is on the service and cost drivers of changes in logistics networks and how these affect freight transport. Our review proceeds along a conceptual framework for modelling that goes beyond the conventional 4-step modelling approach. We identify promising areas for freight modelling that have an integrative function within this framework, such as spatial computable general equilibrium models, supply chain choice models and hypernetwork models.     

A zone design methodology for national freight origin–destination data and transportation modeling

The zone system used for freight data collection and the geographic resolution of published data has a significant impact on analysis and planning. The majority of existing freight model zones are created in an ad hoc way. In this paper, a new model-based design method is introduced to develop freight zones for the continental USA. It focuses on two methodology issues: (1) the criteria that represent the desired properties of a zone system and (2) the constraints that govern the shape, size, and continuity of zones. The method is applied to the continental USA by optimizing an interzonal travel distance weighted by freight flows using county-level freight data. Several optimal national-level freight zone systems with different numbers of zones are developed. The results indicate that a 300-zone system provides a balance between the number of zones and optimization measures where the currently available public freight data are provided with approximately 100 zones.     

A multivariate cointegrating vector auto regressive model of freight transport demand: evidence from Indian railways

In this paper long run structural relationship for freight transport demand is derived for railways in India using annual time series data for 1960–1995. Some of the recent developments in multivariate dynamic econometric time series modelling have been employed such as estimation of long-run structural cointegrating relationship, short-run dynamics and measurement of the effects of shocks and their persistence during the evolution of dynamic freight transport demand system. The models are estimated using a cointegrating vector autoregressive (VAR) modelling framework, which allows for endogeneity of regressors. Results indicate high GDP elasticity and low price elasticity, with real freight rate, i.e. the price variable behaving exogenously with respect to the system. Any disequilibrium in the short-run is likely to be corrected in the long run via adjustments in freight transport demand and GDP. Further, the demand system seems to be stable in the long run and converges to equilibrium in a period of around 3 years after a typical system-wide shock.     

Refocusing the Modelling of Freight Distribution: Development of an Economic-Based Framework to Evaluate Supply Chain Behaviour in Response to Congestion Charging

The distribution of freight is a major contributor to the levels of traffic congestion in cities. However it is much neglected in the research and planning activities of government, where the focus is disproportionately on passenger vehicle movements. Despite the recent recognition of the contribution of freight transportation to the performance of urban areas under the rubric of city logistics, we see a void in the study of how the stakeholders in the supply chain might cooperate through participation in distribution networks, to reduce the costs associated with traffic congestion. Given that transport costs are typically over 45 of all distribution costs, with congestion a major contributor in the urban setting, the importance of establishing ways in which supply chain partnerships might cooperate to reduce levels of freight vehicle movements has much merit. This paper sets out a framework to investigate how agents in a retail supply chain might interact more effectively to reduce the costs of urban freight distribution. We propose an interactive agency choice method as a way of formalising a framework for studying the preferences of participants in the supply chain to support specific policy initiatives. Such a framework is a powerful way of investigating the behavioural response of each agent to many policies, including congestion pricing, as a way of improving the efficient flow of traffic in cities.