共查询到20条相似文献,搜索用时 78 毫秒
1.
2.
水路运单在水路货物运输中起着什么作用,它的性质究竟如何,这在以前一直是一个存在争议的问题。这个问题在2001年实行的《国内水路货物运输规则》(以下称新《货规》)中得到了很好的解决,其第58条规定:“运单是运输合同的证明,是承运人已经接受货物的收据。”明确了运单非运输合同,仅作为运输单据。这个规定,明显超越了原1995年的《水路货物运输规则》的规定。 在1995年的《货规》第五条第二款中规定:“运输合同的基本形式为月度或月度以上运输合同、航次租船合同、水路货物运单和水水联运货物运单。”而据其第十三… 相似文献
3.
在国际海上货物运输中,货物从托运装船至货物交付,整个运输过程中的每一个环节,都伴随着各种货运单证。这些单证起着船货双方交接货物的证明,货方、船方和港方联系物装却工件的凭证,以及货方、船方和港方之间划分责任的依据等作用 。 相似文献
4.
目前,在长江干线水域航行的小机船已占船舶总数的90%,并有增长的趋势,这是因为长江水上运输的货物种类发生了较大的变化. 相似文献
5.
1 THC的由来 THC,即Terminal Handling Charges的缩写,意为码头作业费,是指船方(承运人)向货方(托运人)收取的,为弥补船方额外负担的集装箱货物从集装箱码头堆场到船舷之间前操作费用而产生的一种附加费。 THC完全是集装箱化的产物。在集装箱化未出现以前,在件杂货和散货运输下,根据国际公约和航运惯例,货方负责将货物送至船舷,承担 相似文献
6.
在沿海货物运输实践中,存在着诸多需要澄清和认同的法律问题。货物所有人自己或委托代理人输出运货物手续,很少有谁来关心运输关系和诉权等,如何在运输途中货物灭失或损坏,或有其他损失的发生,那么托运人要面对的问题是货物运输,认是承运人,认要对自己的损失负责?作为收货人的一方是否为合同的当事人,能否依据运输合同起诉?本文将就上述问题作初步探讨。 相似文献
7.
转关运输货物是指由进境地入境后,向海关申请转关运输,运往另一设关地点办理进口海关手续的货物,以及在启运地区办理出口海关手续运往出境地,自出境地海关监管放行的货物和由关境内甲设关地点转运到乙设关地点应受海关监管的货物。 相似文献
8.
近年来,随着我国经济的快速发展,港口的吞吐量迅猛增长,其中重票货物(金属块锭、金属板材和盘元等货物)运输量增长迅速。但是,椐不完全统计,2005 年以来,全国范围内载运钢材等重票货物的船舶发生多起事故。究其原因,都是由于装载钢材等重票货物船 相似文献
9.
推广散装液体危险货物货主(码头)高质量选船机制,是交通运输部在《关于全面加强危险化学品运输安全生产工作的意见》中提出的一项创新工作举措。结合海事管理机构推广危险货物货主(码头)高质量选船机制工作实践,介绍高质量选船机制的提出背景、基本思路和主要做法,分析其推广的必要性和取得的成效,探讨推进过程中遇到的困难和存在的问题,并就海事管理机构进一步推广高质量选船机制提出对策建议。 相似文献
10.
11.
12.
介绍了我国港口资源的整合现状,指出港口整合可以提升港口的形象和地位,也为区域经济和城市的发展注入强大的动力。最后指出在港口资源整合中要避免的几个问题。 相似文献
13.
广州集装箱码头的轮胎式场桥小车制动器使用10多年后,出现了许多问题,故进行了改造.分析了轮胎式集装箱龙门起重机小车制动器的主要故障现象,提出了改造方案,并加以实施. 相似文献
14.
本文对现有的选定球面轴承的三种工程方法进行了分析比较.引入了“合力系数”,并给出了合力方向上投影面积的精确解. 相似文献
15.
16.
17.
18.
分析柴油机故障中常见的机体裂纹故障原因,认为由于设计缺陷和管理及操作不当,易造成船舶柴油机缸体上的裂纹多发生在气缸套凸肩处。如不及时处理这些裂纹和故障,就会造成缸套的裂纹直至出现缸套漏水等严重后果,针对NANTAIQUEEN轮柴油机对该类型故障的检修提出具体措施。 相似文献
19.
20.
The hydrophysical and hydrochemical structure of the Sea of Azov, with developed bottom anoxia, was studied during the RV “Akvanavt” cruise from July 31 to August 03, 2001. The anoxic zone with a thickness from 0.5 to 4 m above the bottom was found in all deep regions of the Sea. Concentrations of hydrochemical parameters were similar to the pronounced anoxic conditions (about 90 mmol m− 3 of hydrogen sulfide, 17 mmol m− 3 of ammonia, 6 mmol m− 3 of phosphate, 7 mmol m− 3 of total manganese). The hydrophysical structure was characterized by the uniform distribution of temperature in the upper 6–7 m mixed layer (UML). Below this a thin (0.4–0.8 m) thermocline layer was observed, just above the anoxic waters. Formation of this phenomenon was connected with that summer weather conditions. Intensive rains led to increased influx of river waters in June. That resulted in large input of allochtonous organic matter (OM) and inorganic nutrients; the latter were consumed on the additional autochthonous organic matter production. In July the weather was characterized by a significant rise in the daily averaged air temperature and large oscillations of temperature during the day. In this period a wind of constant direction was absent, but wind bursts were observed. The completed analyses showed that the formation of such a structure could be connected with the following factors: (i) positive growth trends of the daily averaged temperature and the daily oscillations of temperature, (ii) presence of wind bursts. The joint action of these factors resulted in the formation of the UML. The amplitude of wind bursts determined the depth of UML, and the value of trend determined the value of the temperature change in the thermocline. An initial presence of bottom halocline (caused by the Black Sea water influx to the bottom of the Sea of Azov) prevented the heating of the bottom layer and therefore led to an increase of vertical gradient of temperature in the thermocline. The spatial distribution of the turbulent exchange coefficient confirmed the existence of a “stagnation” area located above the anoxia zone, which is also, apparently, the reason for its occurrence. 相似文献