基于改进TOPSIS的城市客运综合交通枢纽评价

城市客运综合交通枢纽规划方案的优劣对城市综合交通系统的建设发展具有重大影响。为了提高城市客运综合交通枢纽规划方案评价的客观性和准确性,结合城市客运综合交通枢纽客流衔接换乘的系统分析,从多维角度出发构建了城市客运综合交通枢纽规划方案评价的多层次指标体系,在遵循方案评价基本原理及城市客运综合交通枢纽特点的基础上,提出了基于改进逼近理想点排序法的评价方法,用于城市客运综合交通枢纽方案的评价,建立城市客运综合交通枢纽综合评价模型。     

Comparing the impact of future airline network change on emissions in India and the United States

In this paper we use simulation to analyze how flight routing network structure may change in different world regions, and how this might impact future traffic growth and emissions. We compare models of the domestic Indian and US air transportation systems, representing developing and mature air transportation systems respectively. We explicitly model passenger and airline decision-making, capturing passenger demand effects and airline operational responses, including airline network change. The models are applied to simulate air transportation system growth for networks of 49 airports in each country from 2005 to 2050. In India, the percentage of connecting passengers simulated decreases significantly (from over 40% in 2005 to under 10% in 2050), indicating that a shift in network structure towards increased point-to-point routing can be expected. In contrast, very little network change is simulated for the US airport set modeled. The simulated impact of network change on system CO₂ emissions is very small, although in the case of India it could enable a large increase in demand, and therefore a significant reduction in emissions per passenger (by nearly 25%). NO_x emissions at major hub airports are also estimated, and could initially reduce relative to a case in which network change is not simulated (by nearly 25% in the case of Mumbai in 2025). This effect, however, is significantly reduced by 2050 because of frequency competition effects. We conclude that network effects are important when estimating CO₂ emissions per passenger and local air quality effects at hub airports in developing air transportation systems.     

Evaluation of an existing bus network using a transit network optimisation model: a case study of the Hiroshima City Bus network

This study evaluates an existing bus network from the perspectives of passengers, operators, and overall system efficiency using the output of a previously developed transportation network optimisation model. This model is formulated as a bi-level optimisation problem with a transit assignment model as the lower problem. The upper problem is also formulated as bi-level optimisation problem to minimise costs for both passengers and operators, making it possible to evaluate the effects of reducing operator cost against passenger cost. A case study based on demand data for Hiroshima City confirms that the current bus network is close to the Pareto front, if the total costs to both passengers and operators are adopted as objective functions. However, the sensitivity analysis with regard to the OD pattern fluctuation indicates that passenger and operator costs in the current network are not always close to the Pareto front. Finally, the results suggests that, regardless of OD pattern fluctuation, reducing operator costs will increase passenger cost and increase inequity in service levels among passengers.     

The asymmetric effects of gasoline prices on public transportation use in Taiwan

This study investigates the asymmetric effects of gasoline prices on public transportation use in Taiwan. The empirical results obtained are as follows. First, we verify that gasoline price is an important determinant of transit demand. Gasoline prices have significantly positive effects on bus and mass rapid transit (MRT) use. Second, MRT ridership is more sensitive than bus and railway ridership to gasoline price and income. In the face of oil prices escalation and economic growth, the MRT system should have higher priority in public transportation planning. Third, the effects of gasoline prices on bus and MRT use are asymmetric. Bus and MRT use increases faster when gasoline prices rise than it decreases when gasoline prices fall. The transit agencies should adjust operating strategies faster in the rising of oil prices than in the falling of oil prices. It is important for transit planning to use oil prices as signals and increase the flexibility of operation in dealing with the changes in ridership. Some strategies, such as enhancing the availability of transfer information and updating transit information timely, are helpful to move passengers efficiently.     

Assessing the quality of intercity road transportation of passengers: An exploratory study in Brazil

In Brazil, buses represent the main mode of public transportation. However, in recent years intercity and interstate bus companies have been facing a growing competition with other forms of transportation such as bus companies competitors, illegal transportation companies, chartered buses, and, more recently, air companies. In this scenario characterized by growing competition, it is essential to evaluate the quality of road transportation of passengers. In order to contribute to the analysis of this issue, this paper presents a methodological approach to assess the quality of intercity road transportation of passengers, according to the customers’ perspective. By conducting a case study in a city of almost 500,000 inhabitants from the interior of Rio de Janeiro, an Importance–Satisfaction Analysis (ISA) and an assignment procedure were used in order to obtain: (i) the main factors (criteria) that influence the quality of service intercity road transportation of passengers, (ii) the importance degree of criteria related to road transportation of passengers, (iii) the satisfaction of the users of road transportation under the considered criteria, (iv) the critical criteria/items, and (v) the categories which best represent the quality of service intercity road transportation according to the passengers’ perspective. Finally, several possible corrective actions to improve the quality of services considering each critical item/criterion were highlighted and special recommendations were done for the critical process (ticket sales).     

Transit assignment under crowded conditions

This paper presents a transit assignment algorithm for crowded networks. Both congestion in vehicles and queuing at stations are explicitly taken into account in predicting passenger flows for a fixed pattern of origin-destination trip demands. The overflow effects due to insufficient capacity of transit lines are considered to be concentrated at transit stations, while the in-vehicle congestion effects (or discomforts) are considered to be dependent on in-vehicle passenger volume. Overflow delay at a transit station is dependent on the number of excess passengers required to wait for the next transit car. We use a logit model to determine the split between passengers that chose to wait for the next transit car and passengers that chose to board on the alternative transit lines. The proposed algorithm predicts how passenger will choose their optimal routes under both queuing and crowded conditions.     

Finding optimal solutions for vehicle routing problem with pickup and delivery services with time windows: A dynamic programming approach based on state–space–time network representations

Optimization of on-demand transportation systems and ride-sharing services involves solving a class of complex vehicle routing problems with pickup and delivery with time windows (VRPPDTW). This paper first proposes a new time-discretized multi-commodity network flow model for the VRPPDTW based on the integration of vehicles’ carrying states within space–time transportation networks, so as to allow a joint optimization of passenger-to-vehicle assignment and turn-by-turn routing in congested transportation networks. Our three-dimensional state–space–time network construct is able to comprehensively enumerate possible transportation states at any given time along vehicle space–time paths, and further allows a forward dynamic programming solution algorithm to solve the single vehicle VRPPDTW problem. By utilizing a Lagrangian relaxation approach, the primal multi-vehicle routing problem is decomposed to a sequence of single vehicle routing sub-problems, with Lagrangian multipliers for individual passengers’ requests being updated by sub-gradient-based algorithms. We further discuss a number of search space reduction strategies and test our algorithms, implemented through a specialized program in C++, on medium-scale and large-scale transportation networks, namely the Chicago sketch and Phoenix regional networks.     

Schedule-based transit assignment model with vehicle capacity and seat availability

In this paper, we propose a new schedule-based equilibrium transit assignment model that differentiates the discomfort level experienced by sitting and standing passengers. The notion of seat allocation has not been considered explicitly and analytically in previous schedule-based frameworks. The model assumes that passengers use strategies when traveling from their origin to their destination. When loading a vehicle, standing on-board passengers continuing to the next station have priority to get available seats and waiting passengers are loaded on a First-Come-First-Serve (FCFS) principle. The stimulus of a standing passenger to sit increases with his/her remaining journey length and time already spent on-board. When a vehicle is full, passengers unable to board must wait for the next vehicle to arrive. The equilibrium conditions can be stated as a variational inequality involving a vector-valued function of expected strategy costs. To find a solution, we adopt the method of successive averages (MSA) that generates strategies during each iteration by solving a dynamic program. Numerical results are also reported to show the effects of our model on the travel strategies and departure time choices of passengers.     

High speed rail passenger segmentation and ticketing channel preference

A multi-channel strategy for the purposes of marketing and ticketing has been widely employed in various fields, including the transportation industry, yet few transportation studies have investigated ticket channel-related issues. This study thus adopts Taiwan High Speed Rail (THSR) as a case study to identify passengers’ perceptions regarding key factors that affect the channel preference through which they receive their services, particularly across a four-stage ticket purchasing process, including information enquiry, booking, payment, and ticket pick-up. To investigate these key factors, we base the framework of our research model upon customers’ perceived value perspective, adopting a multinomial logit model to examine the influence of channel attributes on HSR passengers’ preferences. The relationship among the decisions made by these passengers at each ticket purchasing stage is also examined. The findings of our study demonstrate that perceived risk, perceived benefit, and perceived ease of use are critical factors influencing passengers’ channel preference throughout the ticket-purchasing process. Perceptual differences are proven to exist due to various demographic factors and trip characteristics. The conclusions of this study have implications for THSR management to design appropriate ticketing channel services for certain types of passengers and can also be generally applied to multiple distribution channels in conventional railway system and intercity bus services.     

Passengers’ activities during short trips on the London Underground

The present study considers underground passengers and investigates the ways in which they spend their time during a trip of average length or shorter. Using a structured procedure that had been refined after a preliminary study, more than 1,700 passengers were observed in London. The results showed that even when the length of travel is very short (2–6 stops), underground passengers engage in several occupations, especially those involving the use of mobile Information and Communication Technologies. These occupations depend on the specific spatial and temporal conditions of the travel, as well as on gender and age. These results should be useful in designing travel services that enhance passengers’ experiences; they also suggest a criterion for comparing trips using different transportation modes (i.e., looking at the time point during the trip at which the ratio of active versus passive occupations changes).     

Characteristics analysis for travel behavior of transportation hub passengers using mobile phone data

The travel behavior of passengers from the transportation hub within the city area is critical for travel demand analysis, security monitoring, and supporting traffic facilities designing. However, the traditional methods used to study the travel behavior of the passengers inside the city are time and labor consuming. The records of the cellular communication provide a potential huge data source for this study to follow the movement of passengers. This study focuses on the passengers’ travel behavior of the Hongqiao transportation hub in Shanghai, China, utilizing the mobile phone data. First, a systematic and novel method is presented to extract the trip information from the mobile phone data. Several key travel characteristics of passengers, including passengers traveling inside the city and between cities, are analyzed and compared. The results show that the proposed method is effective to obtain the travel trajectories of mobile phone users. Besides, the travel behavior of incity passengers and external passengers are quite different. Then, the correlation analysis of the passengers’ travel trajectories is provided to research the availability of the comprehensive area. Moreover, the results of the correlation analysis further indicate that the comprehensive area of the Hongqiao hub plays a relatively important role in passengers’ daily travel.

     

Development of computerized vehicle scheduling system for specialized transportation: delaware case

A computer‐aided vehicle scheduling system is developed for Delaware's state‐wide specialized transportation system for elderly and handicapped persons. This paper presents the model, computer program package, system implementation, evaluation and the lessons learned from the project. The project which spanned two and a half years consists of five phases: (1) examine the manual method of vehicle scheduling (prior to the computerization); (2) develop a scheduling model; (3) develop a computer program package for the operation of the model; (4) install and operate the system; and (5) evaluate the system performance. The scheduling model consolidates passengers by block of time, origin and destination zones and along the direction of vehicle travel, first; second, minimizes the empty vehicle travel; and, lastly, assigns drivers to route considering assignment priority among the types of drivers and passengers. The product of the model is a set of driver log‐sheets which specify the sequence of passenger pick‐ups and drop‐offs. The computer program package includes necessary auxiliary data management functions such as registration of trip reservation, operating statistics and parameter value changes, as well as the execution of the model. It also allows the dispatcher to override the computer generated log‐sheet based on his discretion. The system has been operational for more than one year and it has brought about a number of changes in the operation and the role of the dispatcher. A before‐and‐after comparison of the operation and the lessons learned are also shown.     

Using spike model to reduce traffic congestion and improve public transportation in Malaysia

In this study, passengers’ willingness to pay (WTP) for and willingness to accept (WTA) improved public transportation and shift to public transportation in Malaysia were examined. Specifically, this study aimed to determine the factors or transport attributes that affect passenger WTA and WTP to shift to public transportation. The adopted methodology was based on a contingent valuation (CV) survey, which was conducted on a representative sample of a cross section in residents of Kajang, in Malaysia. This CV primary survey elicited the demand of passengers for improved public transportation. The spike model was adopted to avoid estimation errors caused by a large percentage of respondents who were unwilling to pay and accept at all. The estimation results showed that the best reduction rate for both travel time and cost was 45% among other amounts that range from 15% to 75%. The best parking cost increment was US$0.30 and the average WTP is US$0.68.     

Effects of incorporating latent and attitudinal information in mode choice models

Abstract

Hybrid choice modelling approaches allow latent variables in mode choice utility functions to be addressed. However, defining attitude and behavior as latent variables is influenced by the researcher's assumptions. Therefore, it is better to capture the effects of latent behavioral and attitudinal factors as latent variables than defining behaviors and attitudes per se. This article uses a hybrid choice model for capturing such latent effects, which will herein be referred to as modal captivity effects in commuting mode choice. Latent modal captivity refers to the unobserved and apparently unexplained attraction towards a specific mode of transportation that is resulting from latent attitude and behavior of passengers in addition to the urban transportation system. In empirical models, the latent modal captivity variables are explained as functions of different observed variables. Empirical models show significant improvement in fitting observed data as well as improved understanding of travel behavior.     

The characteristics,uses and potentials of taxicab transportation

Taxicab transportation is a significant segment of urban transportation. Taxicabs, along with other “paratransit” type systems, provide service with characteristics between the automobile and mass transportation. Consequently, they are well suited to a number of special purposes. Taxicabs currently serve a wide range of trip purposes by travellers with varied socio-economic characteristics. Taxicab transportation is most attractive for serving lower density area and off-peak travel particularly where there is only minimal mass transit service. In this regard, taxicabs are a supplement to conventional mass transit. The use of taxicabs for collection and distribution functions for both passengers and freight is gradually being realized. The multiple use of taxicabs offers advantages of increasing taxicab productivity and reducing individual trip costs. Many of the problems related to taxicabs are regulatory and institutional in nature. Unless these constraints are eased or removed, wider application of taxicab transportation, including productivity gains, will be limited.     

Estimation method for railway passengers’ train choice behavior with smart card transaction data

Smart card systems have become the predominant method of collecting public transport fares in Japan. Transaction data obtained through smart cards have resulted in a large amount of archived information on how passengers use public transportation. The data have the potential to be used for modeling passenger behavior and demand for public transportation. This study focused on train choices made by railway passengers. If each passenger’s train choice can be identified over a long period of time, this information would be useful for improving the customer relationship management of the railway company and for improving train timetables. The aim of this study was to develop a methodology for estimating which train is boarded by each smart card holder. This paper presents a methodology and an algorithm for estimation using long-term transaction data. To validate the computation time and accuracy of the estimation, an empirical analysis is carried out using actual transaction data provided by a railway company in Japan. The results show that the proposed method is capable of estimating passenger usage patterns from smart card transaction data collected over a long time period.     

Promoting Public Transport Using Marketing Techniques in Mobility Management and Verifying their Quantitative Effects

Mobility management (MM) is a transportation management policy that uses “soft” measures to attempt to reduce car use and promote sustainable transportation modes such as public transport, bicycles, and walking. Using communication and other means, MM induces voluntarily change towards more sustainable transportation modes. We implemented MM marketing to promote an experimental community bus service. This project had two components: a questionnaire conducted in the service area and a monthly newsletter. The questionnaire was more than a survey; it also communicated information about the bus and helped promote bus use. One month after the survey, we implemented a follow-up survey targeting the initial survey respondents. Results suggest that the MM program produced a general increase in bus use, as well as mouth-to-mouth advertising, that helped promote bus use.     

An eigenmodel for iterative line planning,timetabling and vehicle scheduling in public transportation

Planning a public transportation system is a multi-objective problem which includes among others line planning, timetabling, and vehicle scheduling. For each of these planning stages, models are known and advanced solution techniques exist. Some of the models focus on costs, others on passengers’ convenience. Setting up a transportation system is usually done by optimizing each of these stages sequentially.In this paper we argue that instead of optimizing each single step further and further it would be more beneficial to consider the whole process in an integrated way. To this end, we develop and discuss a generic, bi-objective model for integrating line planning, timetabling, and vehicle scheduling. We furthermore propose an eigenmodel which we apply for these three planning stages and show how it can be used for the design of iterative algorithms as heuristics for the integrated problem. The convergence of the resulting iterative approaches is analyzed from a theoretical point of view. Moreover, we propose an agenda for further research in this field.     

Exploring passenger anxiety associated with train travel

Although people are often encouraged to use public transportation, the riding experience is not always comfortable. This study uses service items to measure passenger anxieties by applying a conceptual model based on the railway passenger service chain perspective. Passenger anxieties associated with train travel are measured using a modern psychometric method, the Rasch model. This study surveys 412 train passengers. Analytical results indicate that the following service items cause passenger anxiety during trains travel: crowding, delays, accessibility to a railway station, searching for the right train on a platform, and transferring trains. Empirical results obtained using the Rasch approach can be used to derive an effective strategy to reduce train passenger anxiety. This empirical study also demonstrates that anxiety differs based on passenger sex, age, riding frequency, and trip type. This information will also prove useful for transportation planners and policy-makers when considering the special travel needs of certain groups to create a user-friendly railway travel environment that promotes public use.     

Quantitative analysis of passenger and baggage security screening at airports

The terrorist attacks in the United States in 2001 opened a new era in air transportation. The realization that civil aircraft can be used as powerful weapons of mass destruction by a small group of people has drastically increased the need for security screening procedures to protect civil flights. Serving as the interface between the air and land transportation modes, airports have become the main focus in the implementation of those procedures. The need to more thoroughly screen passengers and baggage, and the consequent increase in processing time, has created the need for more space for security checkpoints and baggage screening inside passenger terminal buildings—space that is costly and very difficult to find in existing buildings. This paper evaluates the impact those measures have had on the planning and operation of airport passenger terminals. Quantification of those impacts is performed with the use of discrete‐event simulation and spreadsheet models.