A study on model fidelity for model predictive control-based obstacle avoidance in high-speed autonomous ground vehicles

This paper investigates the level of model fidelity needed in order for a model predictive control (MPC)-based obstacle avoidance algorithm to be able to safely and quickly avoid obstacles even when the vehicle is close to its dynamic limits. The context of this work is large autonomous ground vehicles that manoeuvre at high speed within unknown, unstructured, flat environments and have significant vehicle dynamics-related constraints. Five different representations of vehicle dynamics models are considered: four variations of the two degrees-of-freedom (DoF) representation as lower fidelity models and a fourteen DoF representation with combined-slip Magic Formula tyre model as a higher fidelity model. It is concluded that the two DoF representation that accounts for tyre nonlinearities and longitudinal load transfer is necessary for the MPC-based obstacle avoidance algorithm in order to operate the vehicle at its limits within an environment that includes large obstacles. For less challenging environments, however, the two DoF representation with linear tyre model and constant axle loads is sufficient.     

A nonlinear model predictive control formulation for obstacle avoidance in high-speed autonomous ground vehicles in unstructured environments

This paper presents a nonlinear model predictive control (MPC) formulation for obstacle avoidance in high-speed, large-size autono-mous ground vehicles (AGVs) with high centre of gravity (CoG) that operate in unstructured environments, such as military vehicles. The term ‘unstructured’ in this context denotes that there are no lanes or traffic rules to follow. Existing MPC formulations for passenger vehicles in structured environments do not readily apply to this context. Thus, a new nonlinear MPC formulation is developed to navigate an AGV from its initial position to a target position at high-speed safely. First, a new cost function formulation is used that aims to find the shortest path to the target position, since no reference trajectory exists in unstructured environments. Second, a region partitioning approach is used in conjunction with a multi-phase optimal control formulation to accommodate the complicated forms the obstacle-free region can assume due to the presence of multiple obstacles in the prediction horizon in an unstructured environment. Third, the no-wheel-lift-off condition, which is the major dynamical safety concern for high-speed, high-CoG AGVs, is ensured by limiting the steering angle within a range obtained offline using a 14 degrees-of-freedom vehicle dynamics model. Thus, a safe, high-speed navigation is enabled in an unstructured environment. Simulations of an AGV approaching multiple obstacles are provided to demonstrate the effectiveness of the algorithm.     

Pivot point-based control for active rear-wheel steering in passenger vehicles

This paper presents a new application of active rear-wheel steering control to improve the lateral vehicle behaviour. In the state of the art, yaw or lateral velocity is used as control variable that means one degree of freedom being not directly controlled. A worse subjective impressions due to movements in the rear end of the vehicle during strong counter-steering are a consequence. To avoid this effect in urban surroundings, an innovative structure to control the pivot point distance of the vehicle is proposed. In this case the coupled elementary states yaw and lateral velocity can be influenced based on a higher level criteria. Analysis show that pivot point fixing provides a comprehensible reference behaviour. Solving the issue of singularity during disappearing yaw movement is the basis to design a performant modified feedforward input–output linearisation. An analytic stability analysis of the internal dynamics shows system immanent limitations which do not influence the target of improving the lateral vehicle dynamics in urban manoeuvres. Finally, the advantages of pivot-based control are highlighted by a comparison with state of the art rear axle control.     

军用车辆全轮转向电控液压系统研究

本文首先对军用越野车辆全轮转向系统的功能要求进行了分析,在此基础上对全轮转向液压系统的组成和工作原理进行了研究,最后对全轮转向电控系统及电控系统软件进行了详细的设计。为验证全轮转向电控液压系统的性能,进行了装车试验,试验结果表明该电控液压系统能够满足前期方案提出的全轮转向技术指标,具有良好的控制效果。     

Emergency steering control of autonomous vehicle for collision avoidance and stabilisation

ABSTRACT

Collision avoidance and stabilisation are two of the most crucial concerns when an autonomous vehicle finds itself in emergency situations, which usually occur in a short time horizon and require large actuator inputs, together with highly nonlinear tyre cornering response. In order to avoid collision while stabilising autonomous vehicle under dynamic driving situations at handling limits, this paper proposes a novel emergency steering control strategy based on hierarchical control architecture consisting of decision-making layer and motion control layer. In decision-making layer, a dynamic threat assessment model continuously evaluates the risk associated with collision and destabilisation, and a path planner based on kinematics and dynamics of vehicle system determines a collision-free path when it suddenly encounters emergency scenarios. In motion control layer, a lateral motion controller considering nonlinearity of tyre cornering response and unknown external disturbance is designed using tyre lateral force estimation-based backstepping sliding-mode control to track a collision-free path, and to ensure the robustness and stability of the closed-loop system. Both simulation and experiment results show that the proposed control scheme can effectively perform an emergency collision avoidance manoeuvre while maintaining the stability of autonomous vehicle in different running conditions.     

铰接车辆转向侧翻过程仿真

建立了铰接式车辆转向侧翻过程的数学模型,根据铰接式车辆在转向侧翻过程中的一些重要特性,研究和分析了铰接车辆侧翻的影响参数,通过过程仿真,获得了实现铰按车辆安全转向的车速临界值.     

Method for control of steering angles for articulated vehicles using virtual rigid axles

Many methods we have been developed to control the rear wheels of a vehicle, but most of them are designed for automobiles with four wheels. The AWS (all wheel steering) control method for articulated vehicles is currently applied only to Phileas vehicles developed by APTS, but the control algorithm for this system has yet to be reported. In the present paper, a new algorithm is proposed after the AWS ECU (electronic control unit) of the Phileas vehicle was tested and analyzed in order to understand the existing steering algorithm. The new algorithm considers the vehicle geometry, stability of handling, and safety, and can be easily applied to multi-axle vehicles. In order to verify the AWS algorithm, the trajectory and steering angles of each algorithm were compared using the commercial software ADAMS. Turning radius, swing-out, and swept path width were also investigated to determine the turning performance of the proposed algorithm.     

Implementation of active steering on longer combination vehicles for enhanced lateral performance

A steering-based controller for improving lateral performance of longer combination vehicles (LCVs) is proposed. The controller steers the axles of the towed units to regulate the time span between the driver steering and generation of tyre lateral forces at the towed units and consequently reduces the yaw rate rearward amplification (RWA) and offtracking. The open-loop effectiveness of the controller is evaluated with simulations and its closed loop or driver in the loop effectiveness is verified on a test track with a truck–dolly–semitrailer test vehicle in a series of single- and double-lane change manoeuvres. The developed controller reduces the yaw rate RWA and offtracking considerably without diminishing the manoeuvrability. Furthermore, as a byproduct, it decreases the lateral acceleration RWA moderately. The obtained safety improvements by the proposed controller can promote the use of LCVs in traffic which will result in the reduction of congestion problem as well as environmental and economic benefits.     

Flow-field guided steering control for rigid autonomous ground vehicles in low-speed manoeuvring

ABSTRACT

This paper studies the low-speed manoeuvring problem for autono-mous ground vehicles operating in complex static environments. Making use of the intrinsic property of a fluid to naturally find its way to an outflow destination, a novel guidance method is proposed. In this approach, a reference flow field is calculated numerically through Computational Fluid Dynamics, based on which both the reference path topology and the steering reference to achieve the path are derived in a single process. Steering control considers three constraints: obstacle and boundary avoidance, rigidity of the vehicle, plus the non-holonomic velocity constraints due to the steering system. The influences of the parameters used during the flow field simulation and the control algorithm are discussed through numerical cases. A divergency field is defined to evaluate the quality of the flow field in guiding the vehicle. This is used to identify any problematic branching features of the flow, and control is adapted in the neighbourhood of such branching features to resolve possible ambiguities in the control reference. Results demonstrate the effectiveness of the method in finding smooth and feasible motion paths, even in complex environments.     

Application of rack type motor driven power steering control system for heavy vehicles

The Electric Power Steering (EPS) or Motor Driven Power Steering (MDPS) mechanism proves to be a bright prospect among passenger vehicles ensuring better vehicle safety and fuel economy. The car manufacturers are focusing on the production of Rack type EPS system (REPS). This paper describes the development of concurrent simulation technique using TruckSim and control strategy for analysing RMDPS control system with a dynamic vehicle system. A full Truck vehicle model interacting with RMDPS control algorithm was concurrently simulated on a sinusoidal steering input. The dynamic responses of vehicle chassis and steering system resulting were evaluated and compared with proving ground experimental data. The comparisons show reasonable agreement on steering wheel torque, lateral acceleration and yaw rate. This concurrent simulation research leads the possibility of RMDPS performance evaluation of Truck and Semi-bonnet cars.     

Coordinated collision avoidance for connected vehicles using relative kinetic energy density

Vehicular collision often leads to serious casualties and traffic congestion, and the consequences are worse for multiple-vehicle collision. Many previous works on collision avoidance have only focused on the case for two consecutive vehicles using on-board sensors, which ignored the influence on upstream traffic flow. This paper proposes a novel coordinated collision avoidance (CCA) strategy for connected vehicles, which has potential to avoid collision and smooth the braking behaviors of multiple vehicles, leading to an improvement of traffic smoothness. Specifically, model predictive control (MPC) framework is used to formulate the CCA into an optimization problem, where the objective is to minimize the total relative kinetic energy density (RKED) among connected vehicles. Monte Carlo simulations are used to demonstrate the effectiveness of proposed CCA strategy by comparison with other two strategies. Among all the three control strategies, the RKED based control strategy shows the best performance of collision avoidance, including the best crash prevention rates (99.2 % on dry asphalt road and 90.5 % on wet asphalt road) and the best control of distance headways between vehicles.     

Optimal control of brakes and steering for autonomous collision avoidance using modified Hamiltonian algorithm

ABSTRACT

This paper considers the problem of collision avoidance for road vehicles, operating at the limits of friction. A two-level modelling and control methodology is proposed, with the upper level using a friction-limited particle model for motion planning, and the lower level using a nonlinear 3DOF model for optimal control allocation. Motion planning adopts a two-phase approach: the first phase is to avoid the obstacle, the second is to recover lane keeping with minimal additional lateral deviation. This methodology differs from the more standard approach of path-planning/path-following, as there is no explicit path reference used; the control reference is a target acceleration vector which simultaneously induces changes in direction and speed. The lower level control distributes vehicle targets to the brake and steer actuators via a new and efficient method, the Modified Hamiltonian Algorithm (MHA). MHA balances CG acceleration targets with yaw moment tracking to preserve lateral stability. A nonlinear 7DOF two-track vehicle model confirms the overall validity of this novel methodology for collision avoidance.     

Design and hardware-in-loop implementation of collision avoidance algorithms for heavy commercial road vehicles

An important aspect from the perspective of operational safety of heavy road vehicles is the detection and avoidance of collisions, particularly at high speeds. The development of a collision avoidance system is the overall focus of the research presented in this paper. The collision avoidance algorithm was developed using a sliding mode controller (SMC) and compared to one developed using linear full state feedback in terms of performance and controller effort. Important dynamic characteristics such as load transfer during braking, tyre-road interaction, dynamic brake force distribution and pneumatic brake system response were considered. The effect of aerodynamic drag on the controller performance was also studied. The developed control algorithms have been implemented on a Hardware-in-Loop experimental set-up equipped with the vehicle dynamic simulation software, IPG/TruckMaker®. The evaluation has been performed for realistic traffic scenarios with different loading and road conditions. The Hardware-in-Loop experimental results showed that the SMC and full state feedback controller were able to prevent the collision. However, when the discrepancies in the form of parametric variations were included, the SMC provided better results in terms of reduced stopping distance and lower controller effort compared to the full state feedback controller.     

Design and validation of a robust active trailer steering system for multi-trailer articulated heavy vehicles

ABSTRACT

Multi-trailer articulated heavy vehicles (MTAHVs) are increasingly used around the world due to their economic and environmental benefits. However, MTAHVs exhibit poor maneuverability and low lateral stability, which may lead to fatal traffic accidents. Given the safety risks, it is necessary to solve the steering and stability problems of MTAHVs before they are safely mass deployed on our roads. To this end, active trailer steering (ATS) based on the linear quadratic regulator (LQR) technique has been explored. The LQR-based ATS demonstrates improved maneuverability and enhanced lateral stability. In the ATS design, the vehicle and operating parameters are assumed constant. Thus, it is natural to question the robustness of the ATS in presence of vehicle and operating parameter uncertainties. To address the problem, this paper proposes a robust ATS system. The robust ATS controller is designed using a linear matrix inequality (LMI) based LQR method. In the design, both vehicle and steering actuator parameter uncertainties are considered; to enhance the robustness of the ATS, the weighting matrices of the proposed controller are optimized. The robust controller is applied to an A-Train Double, one type of MTAHV. The effectiveness of the robust ATS is demonstrated using numerical and hardware-in-the-loop real-time simulations.     

Development of a hardware in the loop simulation system for electric power steering in vehicles

In this paper, a hardware-in-the-loop simulation (HILS) system was developed before the development of an electric power steering (EPS) system in a vehicle. This study was focused on the establishment of the HILS system. Driving conditions are simulated with the HILS system. The actual steering input parameters are confirmed on the monitor while driving the HILS system. The steering forces observed in the simulation with the developed HILS system are similar to those in real vehicle tests. The developed HILS system can be applied in the development of various types of EPS systems.     

Robust gain-scheduling automatic steering control of unmanned ground vehicles under velocity-varying motion

Owing to the fact that unmanned ground vehicles have the features of time-varying, parametric uncertainties and external disturbances, this paper mainly studies robust automatic steering control of unmanned ground vehicles. Firstly, a linear parameter varying lateral model for unmanned ground vehicle is constructed, in which the longitudinal velocity is represented by a polytope with finite vertices. Secondly, a robust gain scheduling automatic steering control scheme based on the linear matrix inequality technique is proposed to deal with the characteristics of time-varying and external disturbances. Finally, Simulation results based on Adams–Matlab joint platform using a nonlinear full vehicle model have demonstrated that the proposed control approach can simultaneously ensure the control accuracy and strong robustness of system.     

A closed-loop dynamic simulation-based design method for articulated heavy vehicles with active trailer steering systems

This paper presents a closed-loop dynamic simulation-based design method for articulated heavy vehicles (AHVs) with active trailer steering (ATS) systems. AHVs have poor manoeuvrability at low speeds and exhibit low lateral stability at high speeds. From the design point of view, there exists a trade-off relationship between AHVs’ manoeuvrability and stability. For example, fewer articulation points and longer wheelbases will improve high-speed lateral stability, but they will degrade low-speed manoeuvrability. To tackle this conflicting design problem, a systematic method is proposed for the design of AHVs with ATS systems. In order to evaluate vehicle performance measures under a well-defined testing manoeuvre, a driver model is introduced and it ‘drivers’ the vehicle model to follow a prescribed route at a given speed. Considering the interactions between the mechanical trailer and the ATS system, the proposed design method simultaneously optimises the active design variables of the controllers and passive design variables of the trailer in a single design loop (SDL). Through the design optimisation of an ATS system for an AHV with a truck and a drawbar trailer combination, this SDL method is compared against a published two design loop method. The benchmark investigation shows that the former can determine better trade-off design solutions than those derived by the latter. This SDL method provides an effective approach to automatically implement the design synthesis of AHVs with ATS systems.     

New insights from fractional order skyhook damping control for railway vehicles

Active suspensions for railway vehicles have been a topic of research for a number of decades and while their applications in service operation are limited, it seems clear that they will in due course see widespread adoption. Railway suspension design is a problem of compromise on the non-trivial trade-off of ride quality versus track following (guidance), and the skyhook damping control approach has been paramount in illustrating the potential benefits. Since skyhook damping control, various advanced control studies appeared contributing to redefine the boundaries of the aforementioned trade-off. Yet there is no study on the impact of fractional order (FO) methods in the context of skyhook railway active suspensions and in particular related to skyhook damping control. This is the area to which this paper strongly contributes. We present findings from a current project on FO controllers for railway vehicles active suspensions, in particular work on the effect of FO methods in basic skyhook damping control schemes, i.e. pure and intuitively based skyhook. First, we present a brief review of conventional skyhook damping control and then proceed to a rigorous investigation of the impact of FO on the ride quality/track following trade-off. The relevant benefits from FO methods are appraised and new insights highlighted.     

Risk management algorithm for rear-side collision avoidance using a combined steering torque overlay and differential braking

This paper describes a risk management algorithm for rear-side collision avoidance. The proposed risk management algorithm consists of a supervisor and a coordinator. The supervisor is designed to monitor collision risks between the subject vehicle and approaching vehicle in the adjacent lane. An appropriate criterion of intervention, which satisfies high acceptance to drivers through the consideration of a realistic traffic, has been determined based on the analysis of the kinematics of the vehicles in longitudinal and lateral directions. In order to assist the driver actively and increase driver's safety, a coordinator is designed to combine lateral control using a steering torque overlay by motor-driven power steering and differential braking by vehicle stability control. In order to prevent the collision while limiting actuator's control inputs and vehicle dynamics to safe values for the assurance of the driver's comfort, the Lyapunov theory and linear matrix inequalities based optimisation methods have been used. The proposed risk management algorithm has been evaluated via simulation using CarSim and MATLAB/Simulink.