Observer Design for Semi-Active Suspension Control

This paper presents an observer for automotive semi-active suspension control. Automotive suspensions are disturbance affected dynamic systems and semi-active suspensions can be represented as a bilinear model. An observer for semi-active suspensions is formulated such that the estimation error is independent of unknown external disturbance. The proposed observer uses easily accessible measurements such as accelerations and guarantees exponentially convergent state estimation for suspension deflections and velocities. Absolute sprung mass and unsprung mass velocities can be estimated using the proposed observer. Simulations and experimental rig tests show that all states of a semi-active suspension can be estimated only with acceleration measurements. The estimated states are used to improve ride quality in a semi-active suspension.     

Observer Design for Electronic Suspension Applications*

SUMMARY

This paper proposes a new methodology for designing observers for automotive suspensions. Automotive suspensions are disturbance-affected dynamic systems. Semi-active suspensions are bilinear while active suspensions with hydraulic actuators are nonlinear. The proposed methodology guarantees exponentially convergent state estimation for both these systems. It uses easily accessible and inexpensive measurements. The fact that sprung mass absolute velocity of the suspension cannot be estimated in an exponentially stable manner with such measurements is also demonstrated.

Controllers using estimated states are implemented experimentally on the Berkeley Active Suspension Test Rig. Experimental results for two cases are presented : use of observer states to improve ride quality in an active suspension and use of observer states to reduce dynamic tire loading in a semi-active heavy vehicle suspension.     

Adaptive Suspension Concepts for Road Vehicles

Most vehicle suspensions are composed of passive spring and damper devices, although improved suspension performance is possible if an active system is used to control forces or relative velocities. The complexity, power requirements, and cost of fully active suspensions have restricted their use. Various partially active suspensions have been proposed and suspensions with slow load levelers and variable dampers are in widespread use. Here we analyze a class of basically passive suspensions the parameters of which can be varied actively in response to various measured signals on the vehicle. These suspensions can come close to optimal performance with simpler means than many of the active or semi-active schemes previously proposed.     

Adaptive Suspension Concepts for Road Vehicles

SUMMARY

Most vehicle suspensions are composed of passive spring and damper devices, although improved suspension performance is possible if an active system is used to control forces or relative velocities. The complexity, power requirements, and cost of fully active suspensions have restricted their use. Various partially active suspensions have been proposed and suspensions with slow load levelers and variable dampers are in widespread use. Here we analyze a class of basically passive suspensions the parameters of which can be varied actively in response to various measured signals on the vehicle. These suspensions can come close to optimal performance with simpler means than many of the active or semi-active schemes previously proposed.     

Structured H2 Optimization of Vehicle Suspensions Based on Multi-Wheel Models

Summary Various control techniques, especially LQG optimal control, have been applied to the design of active and semi-active vehicle suspensions over the past several decades. However passive suspensions remain dominant in the automotive marketplace because they are simple, reliable, and inexpensive. The force generated by a passive suspension at a given wheel can depend only on the relative displacement and velocity at that wheel, and the suspension parameters for the left and right wheels are usually required to be equal. Therefore, a passive vehicle suspension can be viewed as a decentralized feedback controller with constraints to guarantee suspension symmetry. In this paper, we cast the optimization of passive vehicle suspensions as structure-constrained LQG/H2 optimal control problems. Correlated road random excitations are taken as the disturbance inputs; ride comfort, road handling, suspension travel, and vehicle-body attitude are included in the cost outputs. We derive a set of necessary conditions for optimality and then develop a gradient-based method to efficiently solve the structure-constrained H2 optimization problem. An eight-DOF four-wheel-vehicle model is studied as an example to illustrate application of the procedure, which is useful for design of both passive suspensions and active suspensions with controller-structure constraints.     

Road disturbance estimation for the optimal preview control of an active suspension systems based on tracked vehicle model

This research investigates stochastic estimation of a look-ahead sensor scheme using the optimal preview control for an active suspension system of a full tracked vehicle (FTV). In this scheme, wheel disturbance input to the front wheels are estimated using the dynamic equations of the system. The estimated road disturbance input at the front wheels are utilized as preview information for the control of subsequently following wheels of FTV. The design of optimal preview control is used as a classical linear quadratic Gaussian problem by combining dynamics of the original system and estimation of previewed road inputs. The effectiveness of the preview controller is evaluated by comparing the estimated information with the measured information for different road profiles, where Kalman filter is used for the state-variables estimation of the FTV. This research also considers the reduced order estimation using commonly available sensors in order to decrease the number of sensors and measurements. The simulation results’ using an active suspension system with different preview information shows that the proposed system can be beneficial for the improvement of ride comfort of tracked vehicles without using any specialized sensors for preview information calculation.     

State observer-based sliding mode control for semi-active hydro-pneumatic suspension

This paper proposes an improved virtual reference model for semi-active suspension to coordinate the vehicle ride comfort and handling stability. The reference model combines the virtues of sky-hook with ground-hook control logic, and the hybrid coefficient is tuned according to the longitudinal and lateral acceleration so as to improve the vehicle stability especially in high-speed condition. Suspension state observer based on unscented Kalman filter is designed. A sliding mode controller (SMC) is developed to track the states of the reference model. The stability of the SMC strategy is proven by means of Lyapunov function taking into account the nonlinear damper characteristics and sprung mass variation of the vehicle. Finally, the performance of the controller is demonstrated under three typical working conditions: the random road excitation, speed bump road and sharp acceleration and braking. The simulation results indicated that, compared with the traditional passive suspension, the proposed control algorithm can offer a better coordination between vehicle ride comfort and handling stability. This approach provides a viable alternative to costlier active suspension control systems for commercial vehicles.     

Optimal Performance of Variable Component Suspensions

Most vehicle suspension systems use fixed passive components that offer a compromise in performance between sprung mass isolation, suspension travel, and tireroad contact force. Recently, systems with discretely adjustable dampers and air springs been added to production vehicles. Active and semi-active damping concepts for vehicle suspensions have also been studied theoretically and with physical prototypes. This paper examines the optimal performance comparisons of variable component suspensions, including active damping and full-state feedback, for “quartercar” heave models. Two and three dimensional optimizations are computed using performance indicators to find the component parameters (control gains) that provide “optimal” performance for statistically described roadway inputs. The effects of performance weighting and feedback configuration are examined. Active damping is shown to be mainly important for vehicle isolation. A passive vehicle suspension can control suspension travel and tire contact force nearly as well as a full state feedback control strategy.     

Optimal Performance of Variable Component Suspensions

SUMMARY

Most vehicle suspension systems use fixed passive components that offer a compromise in performance between sprung mass isolation, suspension travel, and tireroad contact force. Recently, systems with discretely adjustable dampers and air springs been added to production vehicles. Active and semi-active damping concepts for vehicle suspensions have also been studied theoretically and with physical prototypes. This paper examines the optimal performance comparisons of variable component suspensions, including active damping and full-state feedback, for “quartercar” heave models. Two and three dimensional optimizations are computed using performance indicators to find the component parameters (control gains) that provide “optimal” performance for statistically described roadway inputs. The effects of performance weighting and feedback configuration are examined. Active damping is shown to be mainly important for vehicle isolation. A passive vehicle suspension can control suspension travel and tire contact force nearly as well as a full state feedback control strategy.     

Skyhook and H8 Control of Semi-active Suspensions: Some Practical Aspects

Summary This paper deals with single-wheel suspension car model. We aim to prove the benefits of controlled semi-active suspensions compared to passive ones. The contribution relies on H 8 control design to improve comfort and road holding of the car under industrial specifications, and on control validation through simulation on an exact nonlinear model of the suspension. Note that we define semi-active suspensions as control systems incorporating a parallel spring and an electronically controlled damper. However, the type of damper used in automotive industry can only dissipate energy. No additional force can be generated using external energy. The control issue is then to change, in an accurate way, the damping (friction) coefficient in real-time. This is what we call semi-active suspension. For this purpose, two control methodologies, H 8 and Skyhook control approaches, are developed, using a linear model of the suspension, and compared in terms of performances using industrial specifications. The performance analysis is done using the control-oriented linear model first, and then using an exact nonlinear model of the suspension incorporating the nonlinear characteristics of the suspension spring and damper.     

Skyhook and H8 Control of Semi-active Suspensions: Some Practical Aspects

Summary This paper deals with single-wheel suspension car model. We aim to prove the benefits of controlled semi-active suspensions compared to passive ones. The contribution relies on H 8 control design to improve comfort and road holding of the car under industrial specifications, and on control validation through simulation on an exact nonlinear model of the suspension. Note that we define semi-active suspensions as control systems incorporating a parallel spring and an electronically controlled damper. However, the type of damper used in automotive industry can only dissipate energy. No additional force can be generated using external energy. The control issue is then to change, in an accurate way, the damping (friction) coefficient in real-time. This is what we call semi-active suspension. For this purpose, two control methodologies, H 8 and Skyhook control approaches, are developed, using a linear model of the suspension, and compared in terms of performances using industrial specifications. The performance analysis is done using the control-oriented linear model first, and then using an exact nonlinear model of the suspension incorporating the nonlinear characteristics of the suspension spring and damper.     

Vehicle dynamic estimation with road bank angle consideration for rollover detection: theoretical and experimental studies

This article describes a method of vehicle dynamics estimation for impending rollover detection. This method is evaluated via a professional vehicle dynamics software and then through experimental results using a real test vehicle equipped with an inertial measurement unit. The vehicle dynamic states are estimated in the presence of the road bank angle (as a disturbance in the vehicle model) using a robust observer. The estimated roll angle and roll rate are used to compute the rollover index which is based on the prediction of the lateral load transfer. In order to anticipate the rollover detection, a new method is proposed in order to compute the time-to-rollover using the load transfer ratio. The used nonlinear model is deduced from the vehicle lateral dynamics and is represented by a Takagi–Sugeno (TS) fuzzy model. This representation is used in order to take into account the nonlinearities of lateral cornering forces. The proposed TS observer is designed with unmeasurable premise variables in order to consider the non-availability of the slip angles measurement. Simulation results show that the proposed observer and rollover detection method exhibit good efficiency.     

Preview-Based Control of Suspension Systems for Commercial Vehicles

An active suspension with preview is developed for the rear axle of a commercial vehicle. The obtained improvements are promising and justify further investigation of the more feasible semi-active suspensions with preview. The inherent non-linearity of semi-active suspensions with switching shock absorbers and the need for controllers that can handle a broad class of control objectives has led to the development of several numerical control methods for both multi-level and continuously variable shock absorbers. The most promising control method and shock absorber type are selected and mounted in a test vehicle. Some first experimental results are discussed.     

Preview suspension control for a full tracked vehicle

In this study, preview control algorithms for the active and semi-active suspension systems of a full tracked vehicle (FTV) are designed based on a 3-D.O.F model and evaluated. The main issue of this study is to make the ride comfort characteristics of a fast moving tracked vehicle better to keep an operator’s driving capability. Since road wheels almost trace the profiles of the road surface as long as the track doesn’t depart from the ground, the preview information can be obtained by measuring only the absolute position or velocity of the first road wheel. Simulation results show that the performance of the sky-hook suspension system almost follows that of full state feedback suspension system and the on-off semi-active system carries out remarkable performance with the combination of 12 on-off semi-active suspension units. The results simulated with 1^st and 2^nd weighting sets mean that the suspension system combined with the soft type of inner suspension and hard type of outer suspension can carry out better ride comfort characteristics than that with identical suspensions. The full tracked vehicle (FTV) system is uncontrollable and the system is split into controllable and uncontrollable subspace using singular value decomposition transformation. Frequency response curves to four types of inputs, such as heaving, pitching, rolling, and warping inputs, also demonstrate the merits of preview control in ride comfort. All the frequency characteristic responses confirm the continuous time results.     

Experimental Verification of Resistance Control, Semi-Active Damping

Electronically controlled vehicle suspensions offer substantial improvements in performance over conventional, passive suspensions but with the price of power, complexity, and actuating bandwidth. Low-bandwidth, semi-active damping addresses the problems of power and bandwidth by using low power modulation of controllable dampers at the frequency of the isolated mass. Resistance controlled, semi-active damping is experimentally verified to better sprung mass isolation while reducing suspension stroke, something that a passive system cannot do. It is also shown to compare reasonably well with computer simulation results. The experimental implementation is a 1/30 scale, two degree-of-freedom test bed that represents the standard quarter vehicle model.     

Preview-Based Control of Suspension Systems for Commercial Vehicles

An active suspension with preview is developed for the rear axle of a commercial vehicle. The obtained improvements are promising and justify further investigation of the more feasible semi-active suspensions with preview. The inherent non-linearity of semi-active suspensions with switching shock absorbers and the need for controllers that can handle a broad class of control objectives has led to the development of several numerical control methods for both multi-level and continuously variable shock absorbers. The most promising control method and shock absorber type are selected and mounted in a test vehicle. Some first experimental results are discussed.     

The Response of Active and Semi-active Suspensions to Realistic Feedback Signals

A simple vehicle model is presented incorporating passive, active, and semi-active suspensions. When the desired feedback variables are ideally available, the system response is well understood and excellent sprung mass isolation results. More often than not, the measured variables must be signal processed in some manner prior to their use in some control algorithm. This paper presents the expected response of a simple vehicle with an active and/or semi-active suspension, subject to non-ideal feedback information.     

基于微分几何理论的汽车半主动悬架非线性振动控制

针对汽车悬架系统的非线性特性,采用1／4汽车二自由度悬架模型分析半主动悬架控制。应用微分几何理论得到输出-干扰解耦方法,再经适当的坐标变换将该模型由非线性系统简化成一线性系统,并对此系统进行最优控制,然后通过非线性状态反馈实现对原系统的半主动控制。与被动悬架的仿真结果进行了比较,表明这种针对具有非线性特征的半主动悬架的非线性控制方法是可行的。通过功率谱分析,控制后系统的能量比被动悬架更趋于平均,悬架动态性能更稳定。     

Estimation of Tire-Road Friction Using Observer Based Identifiers

This paper presents methods for identifying the tire-road friction coefficient. The proposed methods are: an observer-based least square method and an observer/filtered-regressor-based method. These methods were designed assuming that some of the states are not available since physical parameter identification methods developed assuming that the system states are available are not attractive from a practical point of view. The observer is used to estimate signals which are difficult or expensive to measure. Using the estimated states of the system and the filtered-regressor, the parameter estimates are obtained. The proposed methods are evaluated on an eight state nonlinear vehicle/transmission simulation model with a Bakker-Pacejka's formula tire model. Vehicle tests have been performed on dry and wet roads to verify the performance of the methods. It has been shown through simulations and vehicle tests how the RPM sensors can be used with observer based identification methods to estimate the tire-road friction from measurements of engine rpm, transmission output speed and wheel speed. The proposed methods will be useful in the implementation and adaptation of vehicle collision warning/avoidance algorithm since the tire-road friction can be estimated only using the RPM sensors which are currently being used in production vehicles.     

电流变智能半主动悬架模糊PID控制

对带有电流变液智能阻尼器的半主动汽车悬架系统设计了一种模糊PID控制器。将半主动悬架簧载质量的位移及其导数作为模糊控制器的输入，PID控制器的3个增益参数作为其输出，利用电流变液智能阻尼器的阻尼力可随电压变化的特性来使车身的振动降为最小。仿真实验给出了最优被动悬架、固定参数PID控制智能半主动悬架和模糊PID控制智能半主动悬架在不同路面激励情况下的响应曲线。