40t桅式吊机回转平台支承座孔优化加工工艺

通过设计专用加工设备，使大尺寸回转平台的加工由竖向转为卧式，实现了以一个基准面加工支承座孔孔径及端面，提高了支承座孔加工精度及效率。     

船舶机械零件的深孔工艺及其改进方法

很多机械零件具有深孔,如车床主轴、液压传动轴的油缸等。加工深孔时,刀具细长,钻头容易将孔钻偏,使孔中心歪斜;切屑不易排出,散热能力较差,刀具易磨损;当工件精度和光洁度要求较高时,受刀具刚度的限制,需要采取适当措施,以保证工件质量和生产效率。     

深孔喷吸钻内管用工具设计

在使用双管系统钻头进行深孔加工时,如何解决深孔喷吸钻内钻管喇叭口的快速磨损是生产中面临的一大难题。通过工具设计、制造与应用,证实了所设计的新工具能有效提高钻管的耐用度,并降低深孔加工的危险系数。     

气缸盖深孔钻削专用机床

上海船厂为使引进柴油机制造的关键零部件立足于国内生产,并在研制成气缸套深孔钻削专用机床后,运用国内一些较成熟的经验,又于1984年7月研制成功了气缸盖深孔钻削专用机床。通过对RLB56型柴油机气缸盖冷却水孔的加工,在直线度、光洁度、歪斜度、孔距等分性等主要技术指     

增加调节参数代替联动坐标加工特种回转面刀具

提出了通过增加安装调节参数来代替部分数控联动坐标,加工特种回转面刀具的方法,该方法减少了对机床的要求,又改善了加工条件和齿槽形状,只要用 3坐标联动的机床或数控装置便可加工出原本需5坐标甚至6坐标数控才能加工的刀具。     

双拐板传动24轴多头钻床

我厂在生产6135型柴油机中,机体孔的加工,多年来一直是在摇臂钻床上,单孔逐个地进行钻削的。仅机体顶面孔就有78个,而且孔径大小不一,深浅各异,工人同志渴望能有一种专用机床进行机体孔的加工作业。为此,我厂试制成功了一台双拐板传动半自动多头钻床。这台自行设计制造的机床,经过一年半的生产使用,表明其性能可靠、加工质量完全符合生产要求,工作效率比原工艺提高20倍以上。现将这台机床的原理、结构简要叙述如下。     

新型开关触头系统的高精度锥孔加工工艺

本文通过对新型电动短接开关触头系统的软连接母排的结构工艺分析,提出了一种专用刀具和数控加工技术相结合的复合加工高精度锥孔的工艺方法,通过数控加工程序优化,有效地提高产品加工质量和生产效率。     

高耐磨性、高韧性复合氮化硅陶瓷刀具

采用这种新型刀具,可以提高生产效率,节省加工工时、加工用电,机床占用台数和生产面积。新型刀具的技术性能如下: 1.高耐磨、长寿命新型复合氮化硅陶瓷刀具的切削寿命约为硬质合金刀具的10～100倍;     

中南光学仪器厂电潜泵机壳定货量大增

中南光学仪器厂发挥其加工长轴、深孔、薄壁机械产品的优势,为天津电机厂(这个厂引进美国技术,生产先进水平的深潜电动抽油泵)加工长5.575米、孔径0.095米、壁厚仅0.006米的潜泵机壳(此件原由美国提供),质量达到美国设计要求,受到用户信     

三相双控位功率监控器

三相双控位功率监控器能广泛用于机床和其它加工机械来监控刀具磨损和机器运行故障,保护刀具和设备,保护人身安全,能使操作者合理使用设备,提高生产率和节约     

Errata

正In the paper"Influence of Fouling Assemblage on the Corrosion Behaviour of Mild Steel in the Coastal Waters of The Gulf of Mannar,India"in Vol.12,No.4,Page:509,References were lost,and the two authors’biographies were identical.The correct text is shown below.We apologize to the authors and our readers for any inconvenience caused by the errors.     

Journal of Marine Science and Application 2014 Sum. Contents

正~~     

第34届海洋、离岸及极地工程国际会议(英文)

正St.John's,Newfoundland,Canada,May 31-June 5,2015 OMAE2015 is the ideal forum for researchers,engineers,managers,technicians and students from the scientific and industrial communities from around the world to: meet and present advances in technology and its scientific support;     

联合作战计划和执行系统

全球指挥控制系统(GCCS)实施当前美国海军网络中心战信息基础设施的联合计划网络。联合作战计划和执行系统(JOPES)支持GCCS实现联合计划。JOPES有两类计划：时间不限的精密预案计划生成作战计划、方案计划或职能计划；时间敏感的危机行动计划生成作战命令或战役方案。前者在和平时期创建的作战计划是后者的计划基础，加速应付危机的能力。     

Eastbound or westbound ?

In terms of equal sailing distances, where is the inflexion when ships depart from ports in the Asian Continent to New York via Suez and/or Panama？
The answer is China South Port Group （Hong Kong, Shenzhen and Guangzhou）.     

Recent progress on wave induced loading measurements in warships

Recent measurements of wave induced hull strain and flexure in RN warships are presented together with the derivation of the current design criteria for extreme hull girder bending loads. The history of the development of the shipboard instrumentation used is given and recent developments to improve the quality and ease of analysis of the data are described. An unexpectedly high transverse asymmetry in the longitudinal strains measured in destroyers is shown to be the result of a combination of vertical and lateral bending in oblique seas. Finally recent theoretical comparisons between the loading of Deep-Vee hulls and conventional UK rounded bilge hulls are presented which demonstrate the higher loading experienced by this type of hull form.     

桥梁防撞设施物理模型试验

物理模型试验是预报防撞设施所受撞击力及优化设计方案的主要方法之一。结合杭州湾大桥柔性防撞设施及东海大桥独立式防撞体设计方案,阐述了船—防撞体撞击试验的基本原理、方法、试验方案及相关试验结果。提出了柔性防撞系统的优化方案。试验结果表明,该方案经济有效,可供预报类似桥梁防撞设施撞击力时参考。     

印尼某电厂码头水工建筑物设计

印尼某电厂项目码头水工建筑物包括码头、防波堤和护岸等主要组成部分。在该项目水工建筑物的设计过程中,综合考虑当地的自然条件、施工能力和材料来源等因素,不断优化结构选型和结构断面。根据不同使用要求,护岸分别采用直立式和斜坡式2种结构型式,推荐的设计方案节省投资、施工方便,可供同类工程设计参考。     

Impact of regulation on the performances of long-distance transport services: A comparison of the different approaches in Sweden and Norway

Despite the many socio-economic similarities between Sweden and Norway, differences in jurisdiction, organisation, cooperation, and financing of long-distance passenger train and coach services have led to the development of four distinctively different ways of serving the markets. This paper describes how the train and coach markets have developed in the two countries, with emphasis on regulatory and industrial structure and a couple of performance variables.Looking at passenger rail, both countries separated infrastructure from operation over a decade ago. However, while Norwegian rail is characterised by an almost monopoly supplier, rail services in Sweden are partly decentralised to the responsibility of county authorities and are widely subjected to competitive tendering. The rest of the network is about to be opened up for on-the-track competition. Swedish Rail (SJ) has spent the last decades consolidating its core business (passenger rail) and sold out its other businesses. In contrast, the Norwegian state rail (NSB) has expanded its business to become a major bus operator and property owner, with extensions also into the Swedish market.The coach industry was more recently deregulated in both countries. The Swedish coach market is dominated by privately owned companies operating services to and from Stockholm. In Norway, state-owned NSB is a major coach operator on medium distance routes, and is also the largest partner of Nor-Way Bussekspress which totally dominates long-distance coach services. Further, the Norwegian coach market is characterised by cross-ownership and cooperation which has enabled an extensive route network which covers most of Norway.We find distinct differences in achievements in the two modes and in the two countries. Swedish rail services have succeeded in winning market shares and in renewing and developing both infrastructure and service levels to a greater extent than the Norwegian model. On the other hand, the Norwegian coach market seems to be more developed and efficient compared to its Swedish counterpart.The paper concludes with a discussion on the possible links between the different approaches and the performance observed, with the aim to stimulate further and more detailed research on some important issues.     

开放式数据挖掘系统模型

目前国内已经出现了少量的数据挖掘相关产品。国内数据挖掘软件无论从数量还是质量上比较，都与国外软件存在着较大的差距。随着数据仓库技术的普及，数据挖掘应用的需求越来越强烈，如何缩短这种差距，研发数据挖掘软件产品成为国内业界的一个重要问题。通过引用目前国际通用数据挖掘标准技术来构建开放式的数据挖掘系统模型，该系统模型从可扩展性、可重用性、易用性等方面得到了加强。