An operational activity-based method to estimate CO2 emissions from container shipping considering empty container repositioning

This paper develops an operational activity-based method to estimate CO₂ emissions from container shipping in contrasts to the traditional aggregated activity-based method. Two case studies investigate the impacts of empty container repositioning policies and port handling capacity on CO₂ emission index. The results show that the aggregated method could well overestimate CO₂ emissions and the operational activity-based method is more appropriate. The paper also demonstrates that high port-handling capacity and efficient empty container repositioning could reduce CO₂ emissions in seaborne container transportation.     

The effectiveness and costs of speed reductions on emissions from international shipping

Greenhouse gas emissions from international shipping are an increasing concern. The paper evaluates whether vessel speed reduction can be a potentially cost-effective CO₂ mitigation option for ships calling on US ports. By applying a profit-maximizing equation to estimate route-specific, economically-efficient speeds, we explore policy impacts of a fuel tax and a speed reduction mandate on CO₂ emissions. The profit-maximizing function incorporates opportunity costs associated with speed reduction that go unobserved in more traditional marginal abatement cost analyses. We find that a fuel tax of about $150/ton fuel will lead to average speed-related CO₂ reductions of about 20–30%. Moreover, a speed reduction mandate targeted to achieve 20% CO₂ reduction in the container fleet costs between $30 and $200 per ton CO₂ abated, depending on how the fleet responds to a speed reduction mandate.     

The costs and benefits of reducing SO2 emissions from ships in the US West Coastal waters

Potential costs and benefits of policy options for reducing offshore ship pollution are examined using a meta-analysis of studies synthesized regionally for the US West Coast. Net benefits of reducing SO₂ emissions from cargo ships in the US West Coast waters are found to range between $98 million and $284 million, annually; the benefit–cost ratio varies between 1.8 and 3.36, depending on the size of the control area and the sulfur content limit. The results show that about 21,000 tons of on-land equivalent SO₂ emissions or about 33% of SO₂ emissions from all mobile sources in California in 2005 can be reduced annually if the US West Coast exclusive economic zone is designated as an International Maritime Organization-compliant SO_x emission control area (SECA) with fuel-sulfur content not exceeding 1.5%. The analysis demonstrates that designating this area reduces more emissions than establishing a smaller zone at a lower but favorable benefit-cost ratio. Control measures that require 0.5% low-sulfur fuels reduce more SO₂ emissions, and also may have higher net benefits. Technological alternatives may achieve benefits of emissions reductions on the US West Coast across higher ranges of potential fuel prices. Combinations of fuel switching and control technology strategies provide the most cost-effective benefits from SECAs on the US West Coast and other world regions.     

A system dynamics model of CO2 mitigation in China’s inter-city passenger transport

Mitigation of greenhouse gas emissions from transportation has become increasingly important and challenging especially for developing countries. This paper takes the inter-city passenger transport in China as a case, and develops a system dynamics model for policy assessment and CO₂ mitigation potential analysis. It is found that the future demand for China’s inter-city passenger transport is expected to be large, with the turnover volume growing at a rate of 9% per annum and amounting to 6600 billion p-km in 2020. Major emissions reduction potential exists in inter-city passenger transport. In 2020, comparing to the case without any specific policies stressing mitigation, the reduction of CO₂ emissions ranges from 26% to 32% under those scenarios with policy controls. Sensitivity analysis reveals that the CO₂ mitigation will be best achieved by accelerating the development of railway network, together with slowing down the extension of highway network and imposing fuel taxes.     

A regression on climate policy: The European Commission’s legislation to reduce CO2 emissions from automobiles

As part of its efforts to reach the targets of the Kyoto Protocol, in April 2009 the European Commission enacted new legislation to reduce the per-kilometer CO₂ emissions of newly registered automobiles. This paper critically assesses this legislation with respect to its economic and technological underpinnings. First, we argue that the reliance on targets based on per-kilometer emissions not only conceals the true cost of compliance and thereby stifles informed public discourse, but is also less cost-effective than alternative measures such as emissions trading. Second, the emission targets stipulated in this legislation are based on linear-regression methods that we demonstrate to be poorly justified and misleading. Using instead stochastic-frontier analysis, which is argued to more accurately reflect the industry’s technological status quo, alternative targets are consequently proposed.     

CO2 efficiency in road freight transportation: Status quo, measures and potential

Road freight transport continues to grow in Germany and generates 6% of the country’s CO₂ emissions. In logistics, many decisions influence the energy efficiency of trucks, but causalities are not well understood. Little work has been done on quantifying the potential for further CO₂ reduction and the effect of specific activities, such as introducing computer assisted scheduling systems to trucking firms. A survey was survey out and linked fuel consumption to transport performance parameters in 50 German haulage companies during 2003. Emission efficiency ranged from 0.8 tonne-km to 26 tonne-km for 1 kg CO₂ emissions. The results show potential for improvements given a low level of vehicle usage and load factor levels, scarce use of lightweight vehicle design, poorly selected vehicles and a high proportion of empty runs. IT-based scheduling systems with telematic application for data communication, positioning and navigation show positive effects on efficiency. Fuel use and transport performance was measured before and after the introduction of these systems.     

High-speed rail's potential for the reduction of carbon dioxide emissions from short haul aviation: a longitudinal study of modal substitution from an energy generation and renewable energy perspective

Abstract

This paper quantifies and evaluates, utilising a ‘bottom-up’ approach, the effect on CO₂ emissions of a modal shift from short-haul air travel to high-speed rail (HSR), based on projected passenger movements, between Sydney and Melbourne, Australia during the period 2010–2030. To date, peer-reviewed studies assessing the CO₂ emissions from these competing modes of high-speed transportation have been restricted principally to a cross-sectional assessment, with a Eurocentric bias. This present comparative study seeks to address a gap in the literature by assessing, longitudinally, the CO₂ emissions associated with the proposed operation of HSR against the ‘business-as-usual’ air scenario between Sydney and Melbourne. Under the assumed 50/50 modal shift, and the Australian government's current renewable electricity target, an annual reduction in CO₂ emissions of approximately 14% could be achieved when compared with a ‘business-as-usual’ air scenario. This percentage reduction represents a 62 kt reduction in base year, 2010, and a 114 kt reduction in the final year, 2030. In total, the overall reduction achieved by such a modal shift, under the assumed conditions, during the period 2010–2030, equates to approximately 1.87 Mt of CO₂. Importantly, if the electrical energy supply for HSR operations was further ‘decarbonised’, then it follows that a greater emission reduction would be achieved.     

Approaches and Techniques for Modelling CO2 Emissions from Road Transport

Abstract

Transport accounts for around a quarter of CO₂ emissions globally. Transport modelling provides a useful means to explore the dynamics, scale and magnitude of transport-related emissions. This paper explores the modelling tools available for analysing the emissions of CO₂ from transport. Covering a range of techniques from transport microsimulation to global techno-economic models, this review provides insights into the various advantages and shortcomings of these tools. The paper also examines the value of having a broad range of perspectives for analysing emissions from transport. The paper concludes by suggesting that the broad range of models creates a rich environment for exploring a spectrum of policy questions around the emissions from transport, and the potential for combining modelling approaches further enhances the understanding that can be attained.     

Modeling NOx and NO2 emissions from mobile sources: A case study for Hamilton, Ontario, Canada

This study characterizes the dispersion of emissions of oxides of nitrogen and nitrogen dioxide from traffic sources in the Hamilton census metropolitan area. The Integrated Model of Urban Landuse and Transportation for Environmental Analysis software was used to estimate emissions of oxides of nitrogen from traffic sources. The Air Pollution Model, was used to simulate dispersion of the traffic emissions over the city. The models account for the two primary wind directions in this region – the prevailing southwest and a secondary northeast direction. The results show a prominent triangle of high pollution defined by major roads and highways along the periphery of the Hamilton Harbour, at peak-hour. With southwest winds, residential areas along the northern shoreline of the Harbour are affected, while the western sections of the city are affected by northeast winds. High concentrations are persistent in some areas, for both wind directions. The resulting dispersion surfaces characterize the spatial distribution of traffic emissions and thus provide a means of assessing population exposure over the Hamilton area.     

Forecasting petrol demand and assessing the impact of selective strategies to reduce fuel consumption

Abstract

The use of fossil fuels in transportation is an important topic as a result of growing concerns over global warming. Automobile petrol demand has been of particular interest to researchers and policy-makers, given that the automobile is a major contributor to the enhanced greenhouse effect. This paper forecasts Australia's automobile petrol demand up to the year 2020 based on the best performing forecasting model selected out of eight models. In order to establish ways to reduce the demand for petrol, and the consequent by-product of reducing the amount of greenhouse gas emissions, we have estimated the impact on CO₂ for several potential policy instruments, using Transportation and Environment Strategy Impact Simulator (an integrated transport, land use and environmental strategy impact simulation programme). We find that a carbon tax of AU$0.50/kg can reduce automobile kilometres by 5.9%, resulting in reduced demand for petrol and a reduction in CO₂ of 1.5%.     

The viability of pure vegetable oil as an alternative fuel for large ships

Heavy fuels are likely to remain the dominant fuel source for two-stroke, low-speed diesel engines for large ship propulsion for the next decade or more. There is however, potential for increased use of pure vegetable oils (PVO) as an alternative and, by emitting lower levels of several pollutants, this can help the attainment of Annex VI of the MARPOL 73/78 convention aimed at large ships using fuels with less than 4.5% sulphur or 1.5% sulphur in SO_X emission control areas The use of alternative fuels can also influence the attainment of the Kyoto protocol that requires greenhouse gas emissions to be reduced by 5% by 2010 compared to 1990. This paper analyses the physical and chemical properties of various pure vegetable oils as an alternative to heavy fuel oil for large ship propulsion.     

Impacts of an emission based private car taxation policy - First year ex-post analysis

This paper assesses the impacts of a targeted policy designed to influence car purchasing trends towards lower CO₂ emitting vehicles. Vehicle registration tax and annual motor tax rates in Ireland changed in July 2008 from being based on engine size to emissions performance of cars. This paper provides a one year ex-post analysis of the first year of the tax change, tracking the change in purchasing trends arising from the measure related to specific CO₂ emissions, engine size and fuel, and the implications for car prices, CO₂ emissions abatement, and revenue gathered. While engine efficiency improvements had been offset by purchasing trends towards larger and generally less efficient cars in the past, with the average MJ/km remaining constant from 2000 to 2007, this analysis shows that in the first year of the new taxation system the average specific emissions of new cars fell by 13% to 145 g/km. This was brought about, not by a reduction in engine size, but rather through a significant shift to diesel cars. Despite an unexpected reduction in car sales due to a recession in 2008, the policy measure has had a larger than anticipated impact on CO₂ emissions, calculated to be 5.9 ktCO₂ in the first year of the measure. The strong price signal did however result in a 33% reduction in tax revenue from VRT, in financial terms amounting to a drop of €166 million compared to a baseline situation.