Determination of structural stress for fatigue assessment of welded aluminum ship details

The main objective of this paper has been to review and to verify already published hot-spot stress extrapolation procedures for plate structures, and to develop and verify a new and general method for the structural stress extrapolation to be used together with a hot-spot design S-N curve for aluminum ship structures. The proposed extrapolation method has been based on the asymptotic behavior of the stresses adjacent to an idealized notch (‘singularity’). On basis of the fatigue test S-N data obtained in this study, relevant S-N curves to be used together with a proposed extrapolation procedure and with already published extrapolation methods have been suggested. A hot-spot design S-N curve with a characteristic strength of 32 was suggested as a suitable choice for the fatigue assessment of profile ground fillet welded stiffener/bracket connections while a design hot-spot design S-N curve with a characteristic strength of 25 was suggested for as-welded stiffener/bracket connections.     

大型邮轮救生艇替代设计定性分析

以大型邮轮救生系统为研究对象,进行大型邮轮救生艇替代设计定性分析。确定替代设计的安全目标和影响替代设计的相关法规,分析受替代设计影响的相关布置和系统以及主要的操作场景。在此基础上开展危险识别,即对各种危险及其事故场景进行分析,并按其相对于所考虑问题的风险水平进行排序,对于风险等级高的事故场景,提出相应的风险控制措施。确定需要通过定量分析作进一步研究的事故场景、采用的性能衡准和评估方法,进而为大型邮轮救生艇替代设计及相关定性分析提供指导。     

近场动力学方法及其应用

近场动力学作为一种非局部理论,能够通过键的失效来自发模拟材料的失效、破坏,其在海洋工程领域已取得初步的研究成果,尤其是在冰区船舶与海洋工程领域,更显出了该方法的优越性。为了更好地了解近场动力学在冰区船舶和海洋工程中的应用,对近场动力学在冰区船舶与海洋工程应用中的问题进行梳理,主要包括冰材料本构模型、冰−结构作用模型、冰−水耦合方法、结构物力学模型、水下爆炸破冰应用及结构表面覆冰除冰的应用等。同时,在全面回顾已有研究成果的基础上,分析其特点和面临的挑战,探讨相应的解决思路和未来的研究方向。     

Prediction of slamming pressure considering fluid-structure interaction. Part II: Derivation of empirical formulations

This is Part II in a series of papers. Part I [1] investigated the slamming responses of flexible flat stiffened steel and aluminum plates using the nonlinear explicit finite element code LS-Dyna with the Multi-Material Arbitrary Lagrangian-Eulerian (MMALE) solver. Subsequently, a simplified finite element FSI model of water hitting structures that is realistically close to the slamming phenomenon occurring on the bottom part of offshore structures was proposed. The proposed FSI methodology presented in Part I was verified by comparison with the relevant test data. It was evident that the use of the proposed numerical method presented in Part I was very effective for a benchmarking investigation of slamming load considering the hydroelastic effect. However, the method required much effort in terms of computation time and power analysis resources. The present study, Part II, aimed, as an alternative to the FSI analysis approach, to develop empirical formulae for prediction of slamming loads acting on deformable flat stiffened plates used in marine applications. This paper begins by describing the limitations of the existing approaches based on theoretical, experimental and even numerical studies conducted in the past for estimation of slamming loads. Next, it presents, based on the simulation methodology developed in Part I, rigorous parametric studies that had been performed on actual scantlings of marine-seagoing structures. The effects of structural geometry and water impact velocity on slamming pressure are then investigated in detail. Subsequently, the parametric results are analyzed and utilized to derive empirical formulations for the prediction of slamming loads acting on flat stiffened plates of marine structures. The accuracy and reliability of the proposed formulations are established by comparison with the results of the test and other existing formulations. The proposed formulations are expected to be used for the purposes of the design without any time-consuming FSI analysis of advanced and optimal structures that are robust to slamming.     

曹妃甸矿石码头一期工程冰荷载研究

结合我国冰荷载研究现状,介绍曹妃甸矿石码头结构抗冰设计研究成果及冰荷载的设计标准和计算方法,以及由此得到的一些体会和启示,供设计人员参考。     

Development of simplified method for prediction of structural response of stiffened plates under explosion loads

During their lifetime, marine structures may be exposed to accidental loadings such as from collisions or explosions, as well as environmental loadings such as from slamming, sloshing and green water. Such loadings can cause damage to structures. Therefore, to minimize such damage, advanced and robust design guidelines should be formulated. Among those loads, in this study, explosions imparting an impulsive pressure loading containing a rapid increase in pressure and a short duration that can cause serious casualties, property losses, and marine pollution were considered. In this paper, a practical and robust method for damage assessment of marine structures exposed to explosion loads based on a single degree of freedom (SDOF) system and numerical simulations is proposed. The SDOF method was improved by introduction of new and better idealization resistance for the system and consideration of the effect of strain-rate, and subsequently was verified by a numerical method developed using the commercial ABAQUS software package. The numerical method was itself validated by comparison with relevant pulse pressure test data available in the open literature (good correlation was shown). Based on the validated numerical models, a rigorous parametric study of the structural response of stiffened plates having actual scantlings of offshore structures was performed. The numerically obtained maximum deformations were compared with the results from the improved SDOF method in a parametric study, and the variation of both methods was verified. Finally, simple yet accurate and reliable formulations for prediction of structural response were empirically derived. These formulations are expected to be usefully employed as a first-hand tool for prediction of damage extent of marine structures (including offshore structures) due to explosion loads.     

大型散货船灯光信号设计

结合相关规范、公约及运河规则,总结了无限航区大型散货船的灯光信号设计,详细介绍了灯光信号的种类、技术规格、配置要求、布置要求及系统的供电与控制。以57000DWT散货船为例,对其灯光信号布置及系统设计加以分析和说明。对同类船型的灯光信号设计有一定的借鉴作用。最后对未来灯光信号设计的系统优化作了简要论述。     

FRP筋混凝土简支深梁力学性能试验研究

为解决海港工程中钢筋混凝土结构钢筋锈蚀问题,采用纤维增强塑料筋(FRP)代替传统钢筋,开展了不同配筋情况下FRP筋增强混凝土深梁的力学性能试验,对FRP深梁在荷栽作用下的截面特性、裂缝宽度、极限承载力和破坏形式等力学特性进行深入研究,为进一步在工程中开展应用提供了试验参考.     

Optimal investment priority in container port development

The aim of this paper is to develop realistic and relevant investment planning models for inland container transportation systems. The models may be utilized to identify the most effective investment plan for inland transportation infrastructure development and to evaluate the inland container transportation system. The procedure enables determination of the optimal locations, sizes and time of container port developments as well as the optimal container cargo flows through transportation networks. A heuristic algorithm was developed for the purpose of evaluating alternative investment plans. Dynamic and linear programming methods are applied to each of the two planning problems: the former for the optimum container port capacity development problem and the latter for the optimal allocation of inland container traffic movements. The model has been applied to concrete inland container transportation system problems in Korea.     

Optimal investment priority in container port development

The aim of this paper is to develop realistic and relevant investment planning models for inland container transportation systems. The models may be utilized to identify the most effective investment plan for inland transportation infrastructure development and to evaluate the inland container transportation system. The procedure enables determination of the optimal locations, sizes and time of container port developments as well as the optimal container cargo flows through transportation networks. A heuristic algorithm was developed for the purpose of evaluating alternative investment plans. Dynamic and linear programming methods are applied to each of the two planning problems: the former for the optimum container port capacity development problem and the latter for the optimal allocation of inland container traffic movements. The model has been applied to concrete inland container transportation system problems in Korea.     

IMO成员国强制性审核对中国VTS的影响及履约策略

文中在梳理国际海事组织(IMO)强制性审核机制以及相关公约和国际航标协会(IALA)规则基础上,结合国内船舶交通服务(VTS)发展现状,综合分析了IMO强制性审核对VTS的影响,总结出中国VTS应对审核的要点,并从法律和技术层面对中国VTS应对IMO强制性审核提出了履约策略。     

The expansion of the Panama Canal and its impact on global CO2 emissions from ships

As part of the discussions of the environmental effects of the expansion of the Canal through the construction of a third set of locks, the Panama Canal Authority (PCA) began to consider measuring the impact of the project on global CO₂ emissions in 2006. The hypothesis PCA intends to investigate whether the third set of locks will prompt reductions in total world CO₂ emissions or not. The Canal's third set of locks will prevent reaching the saturation point, and will avoid diversion of traffic to potentially longer alternative routes, such as the Suez Canal and Cape Horn, thereby reducing distances and fuel consumption. In addition, the widening of the Canal may promote the construction of modern-type post-Panamax vessels, making transportation of freight more efficient through economies of scale. This white paper will initiate an exploratory research on the subject based on two possible scenarios: an existing Canal and an expanded Canal. Both scenarios will take physical distances, closest alternative routes, as well as fuel consumption of vessels and other relevant modes of transportation into consideration.     

柴油机水下排气海水倒灌现象的理论分析

柴油机水下排气时存在海水由排气管倒灌入柴油机进而导致柴油机严重损坏的风险。通过分析管内气液两相逆向流动特性和国内外相关研究成果,指出水下排气管内海水倒流的物理机制,并给出了基于Wallis无因次气相速度的水下排气管海水倒流判断准则。进而以某柴油机排气参数为基础,计算分析了排气管管径、排气口水位深度及排气温度等因素对管内倒流界限气速的影响,所得结果对水下排气柴油机防止海水倒灌具有指导意义。     

构建船舶与海洋工程数字化性能平台促进科技自主创新

作为对船舶设计基础共性技术研发的一种思考,提出构建“船舶与海洋工程数字化性能平台”的设想。这一性能平台是以信息化、数字化为核心,以虚拟技术、网络协同、远程交互技术为手段,开放式和加盟式一体化的综合集成系统。在这种数字化性能平台上,运用计算流体动力学方法,可以全面地对船舶的安全性能、综合航行性能和海洋工程结构物的流体动力特性进行预报、评估和优化,成为新型舰船、新型海洋平台和海洋结构物研究开发的重要工具和手段,促进船型开发和设计的自主创新。     

Stochastic modelling of quadratic wave components

This paper deals with stochastic wave models and their influence on wave load modelling of marine structures. The need for more refined theories is underlined for some applications and an entirely new quadratic model for the wave elevation is outlined. Finally, a number of physical phenomena relevant to waves are illustrated which are likely to be important for marine structures and could, in the near future, require ad hoc modelling.     

完善行政复议举证责任分配制度的法律思考

文中借鉴诉讼举证责任的分配原理,结合行政复议实践,从法理基础、关联因素、制度选择等方面对行政复议举证责任分配制度的建立进行了深入分析并提出了一些建议,可供立法部门建立和完善行政复议举证责任分配制度时参考。     

Towards a holistic digital twin solution for real-time monitoring of aquaculture net cage systems

Digital twins and relevant concepts are being applied in a wide variety of ways, and they are of most use when an actual real-world physical system or process (a physical twin) is changing over time and when measurement data correlated with this change can be captured. In this work, a digital twin model was implemented for real-time monitoring of aquaculture net cage systems, which is notoriously challenging because of several difficult-to-measure properties, such as forces on and deformation of the flexible netting structures, waves and flow field alterations around the cage and complex stiffness behaviour of the mooring elements made by fibre ropes. These properties were set to be adaptable according to the resultant outputs, such as cage responses and mooring loads that were continuously compared with the measurement data obtained from remote monitoring sensors. In this way, real-time sensor data were assimilated into the numerical simulation model for representing the actual net cage system. No dedicated sensors were used for fish monitoring, but the fish behavioural responses to current, wave and cage deformation were modelled according to relevant field observational data. A wireless sensor network has also been tested for the digital twin implementation, which was found to be suitable for practical uses in fish farms.     

游艇码头设计

目前国内游艇码头的设计尚处于起步阶段,缺乏建设经验和相关标准、规范。游艇码头技术研究是在设计实践和国内、外调研、考察的基础上完成的。本文简述了游艇码头的选址、总平面布置、工艺系统、水工结构的一般要求和主要参数的确定,供同类码头设计时参考、借鉴。