共查询到20条相似文献,搜索用时 171 毫秒
1.
2.
3.
通过建立水下航行体空间的操纵运动数学模型,运用Visual C++设计开发水下航行体操纵运动预报系统,对水下航行体水平面、垂直面及空间典型操纵运动进行数值预报,数值模拟结果合理,能够较为全面地预报水下航行体的空间操纵运动。 相似文献
4.
5.
喷水推进船的操纵性预报及运动仿真 总被引:2,自引:0,他引:2
根据船舶的船型特点和航行状态,采用日本操纵运动数学模型小组(MMG)提出的非线性数学模型来模拟喷水推进船的操纵运动。为获得操纵运动参数,选用四阶定步长龙格.库塔法来求解该数学模型,并将理论计算结果与实船试验结果进行了比较,说明用该方法来预报喷水推进船的操纵性能是可靠的。最后,在Visual C 平台上结合OpenGL图形接口技术,进行舰艇的运动仿真,其仿真结果比较可靠,具有重要的参考价值。 相似文献
6.
7.
8.
操纵性能是无人潜器(UUV)航行的重要性能之一,其优劣直接影响到UUV的航行安全和稳定性,UUV操纵性能评判和优化是UUV优化设计的重要组成部分.基于AUTOSUB型无人潜器的设计模型,在充分分析艇体操纵性能的基础上,重点研究UUV水平运动和垂直运动性能,提出了较为完备的UUV操纵性能优化数学模型.采用模糊评判方法构造操纵性系统总目标函数,利用专家咨询法确定了各子系统的权重;通过大量艇体操纵性能数据对各个性能指标进行统计分析,选择模糊数学中对应的隶属度函数进行拟合,确定相应隶属度函数参数;利用禁忌搜索算法对遗传算法的改进而得到的遗传禁忌搜索算法(GA-TS),由并行和分层策略改进遗传算法得到的并行遗传算法(PGA)以及遗传二次载波算法(LGA),将数学模型与这3种算法集成,利用C++语言编写了UUV操纵性能优化软件.通过对总系统优化得到的遗传禁忌搜索算法寻优能力最强,利用该算法研究水平面运动和垂直面运动2个子系统,得到各个性能指标权重对系统目标函数影响程度的排序,同时分别得到-组最佳性能的权重分配. 相似文献
9.
内河航道船舶航行操纵平面二维数值模拟初步研究 总被引:1,自引:0,他引:1
船舶航行操纵数学模型包括水流数学模型和船舶航行数学模型,其中水流数学模型是船舶航行模拟的基础。基于船舶航行操纵数学模型的基本原理,研究开发了船舶航行操纵平面二维数学模型,其中水流数学模型采用贴体坐标系下的平面二维水流数学模型,采用有限体积法对水流基本控制方程进行了离散,在求解过程中采用了欠松弛技术和逐线迭代法,船舶航行数学模型采用比较流行的"组合型"水动力模型,并采用有限差分法离散求解船舶运动方程。根据实船或船模在静水条件及均匀流条件下的航行试验资料,对所建立的船舶航行操纵数模进行了验证和参数率定,结果表明该船舶数模能够正确模拟船舶的航行操纵性能。 相似文献
10.
11.
利用差分进化法对一阶和二阶非线性船舶操纵KT方程中的参数进行辨识,采用积分的方法处理试验数据以获得辨识所需的样本,将辨识结果与前人的方法进行比较,证明该方法能有效提高辨识精度.另外,辨识过程采用平行处理法代替分步辨识法,解决了辨识中的参数相消现象,同时也简化了辨识流程. 相似文献
12.
基于最小二乘支持向量机(LS-SVM)和积分型辨识样本结构开展了船舶操纵运动的在线建模.以整体型Abkow-itz模型为辨识对象,大阪号油轮作为具体研究对象.在操纵运动仿真时,采用40个粘性类水动力导数的Abkowitz模型,但是在参数辨识时,采用了仅具有20个粘性类水动力导数的简化模型.为了对建模方法的有效性进行检验,将辨识得到的水动力导数与其原始值进行了比较,同时也针对辨识模型和原始模型的操纵运动仿真进行了比较.辨识结果表明,使用简化模型进行船舶操纵运动的在线建模是合适的,具有较好的预报效果和较高的精度. 相似文献
13.
应用支持向量机的船舶操纵运动响应模型辨识 总被引:1,自引:0,他引:1
建模是评估船舶操纵性和可控性的重要前提.基于自由自航船模试验的系统辨识方法是求取船舶操纵运动数学模型中的水动力系数的有效手段之一.文中提出了一种使用支持向量回归估计的船舶操纵运动响应模型辨识方法,该方法通过训练自由自航试验数据样本得到参数回归模型.辨识和仿真结果验证了文中所提出的方法的有效性. 相似文献
14.
15.
16.
17.
Takuya Ohmori 《Journal of Marine Science and Technology》1998,3(2):82-93
A finite-volume method of computing the viscous flow field about a ship in maneuvering motion was developed. The time-dependent
Navier-Stokes equation discretized in the generalized boundary-fitted curvilinear coordinate system is solved numerically.
A third-order upwind differencing scheme, a marker and cell (MAC)-type explicit time marching solution algorithm and a simplified
subgrid scale (SGS) turbulence model are adopted. The simulation method is formulated, including the movement of a computational
grid fitted to the body boundary that allows computation of the flow field around a body under unsteady motion.
To estimate the maneuvering ability of a ship, the accurate prediction of the hydrodynamic forces and moments of the hull
is important. Therefore, experimental methods of finding the hydrodynamic forces of a ship in maneuvering motion, such as
the oblique towing test, the circular motion test (CMT) and planar motion mechanism (PMM) test, were established. Numerical
simulation methods for those captive model experiments were developed introducing computational fluid dynamics (CFD).
First, numerical methods for steady oblique tow and steady turn simulation were developed and then extended to unsteady forced
motion. Simulations were conducted about several realistic hulls, and the results were verified by comparisons with measured
results obtained in model experiments. Hydrodynamic forces and the moment, the longitudinal distribution of the hydrodynamic
lateral force, and the pressure distribution on the hull surface showed good agreement. 相似文献
18.
基于越南电力中心沿海海港工程,阐述了水深不能满足要求的项目的水域平面尺度设计方法。除根据各国标准规范及设计者的经验判断来决定外,结合船舶操纵模拟试验验证并优化设计方案,更能保证船舶在港内操纵航行的可行性、安全性和经济性。同时分析了模型试验存在的局限性,提醒设计者需要在建模和操纵等环节尽量减少模拟和实际情况的误差,保证试验准确可靠。相关设计方法与思路可为类似港口水域平面设计提供参考。 相似文献
19.
In this paper, Neural Networks (NNs) are used in the modeling of ship maneuvering motion. A nonlinear response model and a linear hydrodynamic model of ship maneuvering motion are also investigated. The maneuverability indices and linear non-dimensional hydrodynamic derivatives in the models are identified by using two-layer feed forward NNs. The stability of parametric estimation is confirmed. Then, the ship maneuvering motion is predicted based on the obtained models. A comparison between the predicted results and the model test results demonstrates the validity of the proposed modeling method. 相似文献