Assessment of air quality near traffic intersections in Bangalore city using air quality indices

Air quality indices are used for local and regional air quality management in many metro cities of the world. In the present study, air quality indices have been calculated using the US Environmental Protection Agency procedure to assess the status of ambient air quality near busy traffic intersections in Bangalore, India. The measured 24 h average criteria pollutants such as sulfur dioxide, oxides of nitrogen, respirable suspended particulate matter and suspended particulate matter for the period from 1997 to 2005 at three air quality monitoring stations are used for the development of AQIs. The result indicated that the air pollution at all the three air quality monitoring stations can be characterized as ‘good’ and ‘moderate’ for SO₂ and NO_x concentrations for all days from 1997 to 2004. Analysis of air quality indices values for both forms of suspended matter concentrations during 1999–2005 indicates 91% and 94% of the times days are in category ‘good’ and ‘moderate’. The yearly average air quality indices values of respirable suspended particulate matter and suspended particulate matter concentrations indicated decreasing trend and are coming under the category of ‘good’ and ‘moderate’ form the category of ‘poor’ and ‘very poor’.     

Accounting for traffic speed dynamics when calculating COPERT and PHEM pollutant emissions at the urban scale

Coupling a traffic microsimulation with an emission model is a means of assessing fuel consumptions and pollutant emissions at the urban scale. Dealing with congested states requires the efficient capture of traffic dynamics and their conditioning for the emission model. Two emission models are investigated here: COPERT IV and PHEM v11. Emission calculations were performed at road segments over 6 min periods for an area of Paris covering 3 km². The resulting network fuel consumption (FC) and nitrogen oxide (NOx) emissions are then compared. This article investigates: (i) the sensitivity of COPERT to the mean speed definition, and (ii) how COPERT emission functions can be adapted to cope with vehicle dynamics related to congestion. In addition, emissions are evaluated using detailed traffic output (vehicle trajectories) paired with the instantaneous emission model, PHEM.COPERT emissions are very sensitive to mean speed definition. Using a degraded speed definition leads to an underestimation ranging from −13% to −25% for fuel consumption during congested periods (from −17% to −36% respectively for NOx emissions). Including speed distribution with COPERT leads to higher emissions, especially under congested conditions (+13% for FC and +16% for NOx). Finally, both these implementations are compared to the instantaneous modeling chain results. Performance indicators are introduced to quantify the sensitivity of the coupling to traffic dynamics. Using speed distributions, performance indicators are more or less doubled compared to traditional implementation, but remain lower than when relying on trajectories paired with the PHEM emission model.     

Analyzing spatiotemporal traffic line source emissions based on massive didi online car-hailing service data

Nowadays, the massive car-hailing data has become a popular source for analyzing traffic operation and road congestion status, which unfortunately has seldom been extended to capture detailed on-road traffic emissions. This study aims to investigate the relationship between road traffic emissions and the related built environment factors, as well as land uses. The Computer Program to Calculate Emissions from Road Transport (COPERT) model from European Environment Agency (EEA) was introduced to estimate the 24-h NOx emission pattern of road segments with the parameters extracted from Didi massive trajectory data. Then, the temporal Fuzzy C-Means (FCM) Clustering was used to classify road segments based on the 24-h emission rates, while Geographical Detector and MORAN’s I were introduced to verify the impact of built environment on line source emissions and the similarity of emissions generated from the nearby road segments. As a result, the spatial autoregressive moving average (SARMA) regression model was incorporated to assess the impact of selected built environment factors on the road segment emission rate based on the probabilistic results from FCM. It was found that short road length, being close to city center, high density of bus stations, more ramps nearby and high proportion of residential or commercial land would substantially increase the emission rate. Finally, the 24-h atmospheric NO₂ concentrations were obtained from the environmental monitor stations, to calculate the time variational trend by comparing with the line source traffic emissions, which to some extent explains the contribution of on-road traffic to the overall atmospheric pollution. Result of this study could guide urban planning, so as to avoid transportation related built environment attributes which may contribute to serious atmospheric environment pollutions.     

An integrated modeling approach for facilitating emission estimations of alternative fueled vehicles

This paper develops an integrated model for reliable estimation of daily vehicle fuel savings and emissions using an integrated traffic emission modeling approach created by incorporating the US Environmental Protection Agency’s vehicle emission model, MOVES, and the PARAMICS microscopic traffic simulation package. A case study is conducted to validate the model using a well-calibrated road network in Greenville, South Carolina. For each transportation fuel considered, both emission and fuel consumption impacts are evaluated based on market shares.     

Estimation of road transport related air pollution in Saint Petersburg using European and Russian calculation models

The paper analyzes Russian and European emission and dispersion models aimed at the estimation of road transport related air pollution on street and regional scale as exemplified with St. Petersburg, Russia. It demonstrates the results of model calculations of peak concentrations of main harmful substances (NО_X, CO and PM₁₀) along the St. Petersburg Ring Road at high traffic volume and adverse meteorological conditions (calm, temperature inversion) executed by means of a Russian street pollution model, and it evaluates the computed results against the measurements from monitoring stations. The paper also examines the ways of adaptation of the COPERT IV model – a software tool for calculation of air pollutant and greenhouse gas emissions from road transport on regional or country scale – to the inventory conditions of the Russian Federation, compares the COPERT IV numerical estimates with the national inventory data. It also reveals the obstacles and possibilities in the harmonization of the Russian and European approaches.     

Modal analysis of real-time,real world vehicular exhaust emissions under heterogeneous traffic conditions

This study presents the characteristics of real world, real time, on-road vehicular exhaust emission namely, carbon monoxide (CO), nitric oxide (NO), hydrocarbons (HC), and carbon dioxide (CO₂) emitted under heterogeneous traffic conditions. Field experiments were performed on major category of vehicles in developing countries, i.e. two-wheelers, auto-rickshaws, cars and buses. The on-board monitoring was carried out on different corridors with varying road geometry. Results revealed that the driving cycle was dependent on the road geometry, with two lane mixed flow corridor having lot of short term events compared to that of arterial road. Vehicular emissions during idling and cruising were generally low compared to emissions during acceleration. It was also found that emissions were significantly dependent on short term events such as rapid acceleration and braking during a trip. Also, the standard emission models like COPERT and CMEM under predicted the real world emissions by 30–200% depending upon different driving modes. The on-road emissions measurements were able to capture the emission characteristics during the micro events of real world driving scenarios which were not represented by standard vehicle emission measured at laboratory conditions.     

VISSIM/MOVES integration to investigate the effect of major key parameters on CO2 emissions

This paper looks at CO₂ emissions on limited access highways in a microscopic and stochastic environment using an optimal design approach. Estimating vehicle emissions based on second-by-second vehicle operation allows the integration of a microscopic traffic simulation model with the latest US Environmental Protection Agency’s mobile source emissions model to improve accuracy. A factorial experiment on a test bed prototype of the I-4 urban limited access highway corridor located in Orlando, Florida was conducted to identify the optimal settings for CO₂ emissions reduction and to develop a microscopic transportation emission prediction model. An exponentially decaying function towards a limiting value expressed in the freeway capacity is found to correlate with CO₂ emission rates. Moreover, speeds between 55 and 60 mph show emission rate reduction effect while maintaining up to 90% of the freeway’s capacity. The results show that speed has a significant impact on CO₂ emissions when detailed and microscopic analysis of vehicle operations of acceleration and deceleration are considered.     

Enhanced, multi criteria based site selection to measure mobile source toxic air pollutants

A multi-criteria-based site selection process that was developed for the Las Vegas near-road study is used to select the most appropriate near-road measurement sites in the Detroit area. The study measures particulate matter with aerodynamic diameters ?2.5 μm and mobile source air toxic compounds, and to document the rationale for selecting or rejecting specific sites. An application of this multi-criteria decision analysis may be the recent US Environmental Protection Agency rule requiring the siting of NO₂ monitors within 50 m of major roads as well as siting for the measurement of community-wide NO₂ concentrations.     

A method to measure the eco-efficiency of diesel locomotive

Brazilian railroads transport over 490 million tons a year using diesel-electric locomotives. These locomotives emit several pollutants into the atmosphere and because of that, the railroads seek to reduce emissions and achieve global emission standards. Thus, it is important to analyze the environmental impact of the use of diesel and alternative fuels to reach environmental standards. This paper makes use of a method based upon the World Business Council for Sustainable Development (WBCSD) metrics to evaluate the locomotives’ eco-efficiency. The method was applied to Estrada de Ferro Vitória a Minas (EFVM). Different scenarios representing the exchange of fuel sources and technologies were developed, tested and analyzed. The impacts were evaluated by seven eco-efficiency performance indicators and compared with United States Environmental Protection Agency (EPA) standards. The results offered cost savings and emissions reduction opportunities.     

Commuters’ willingness-to-pay for improvement of transfer facilities in and around metro stations – A case study in Kolkata

Although several cities in India are developing the metro system, there are lacunas associated with transfer facilities in and around metro stations. The present work aims to investigate the perception of commuters of Kolkata city, India in terms of their willingness-to-pay (WTP) for improvement of transfer facilities. A stated preference survey instrument was designed to collect choice responses from metro commuters and the database was analysed by developing random parameter logit (RPL) models. The decomposition effects of various socioeconomic and trip characteristics on mean estimates were also investigated in random parameter logit models with heterogeneity. The work indicates significantly high WTP of metro commuters as compared to the average metro fare for improvement of various qualitative attributes of transfer facility such as ‘facility for level change’, ‘visual communication’, ‘pedestrian crossing’, and ‘pedestrian environment’. The WTP values are also found to vary across different groups of commuter formed on the basis of ‘trip purpose’, ‘monthly household income’, ‘station type’ and ‘metro fare’. ‘Work trip’ commuters are found to have higher WTP for improvement of access time, pedestrian environment and use of an escalator over the elevator. On the other hand, ‘high-income group’ commuters have shown higher WTP for improvement of access time, pedestrian crossing, and pedestrian environment. While ‘high fare group’ commuters have higher WTP for access time and pedestrian environment, heterogeneity is also observed in WTP for facility for level change, pedestrian crossing, and pedestrian environment across commuters using different ‘station type’ (underground, at-grade, and elevated). The findings from the study provide a basis for formulating policies for the improvement of transfer facilities in and around metro stations giving due attention to the preference of commuters having different socioeconomic and trip characteristics.     

Impact of horizontal geometric design of two-lane rural roads on vehicle co2 emissions

In 2014, highway vehicles accounted for 72.8% of all Greenhouse Gases emissions from transportation in Europe. In the United States (US), emissions follow a similar trend. Although many initiatives try to mitigate emissions by focusing on traffic operations, little is known about the relationship between emissions and road design. It is feasible that some designs may increase average flow speed and reduce accelerations, consequently minimizing emissions.This study aims to evaluate the impact of road horizontal alignment on CO₂ emissions produced by passenger cars using a new methodology based on naturalistic data collection. Individual continuous speed profiles were collected from actual drivers along eleven two-lane rural road sections that were divided into 29 homogeneous road segments. The CO₂ emission rate for each homogeneous road segment was estimated as the average of CO₂ emission rates of all vehicles driving, estimated by applying the VT-Micro model.The analysis concluded that CO₂ emission rates increase with the Curvature Change Rate. Smooth road segments normally allowed drivers to reach higher speeds and maintain them with fewer accelerations. Additionally, smother segments required less time to cover the same distance, so emissions per length were lower. It was also observed that low mean speeds produce high CO₂ emission rates and they increase even more on roads with high speed dispersions.Based on this data, several regression models were calibrated for different vehicle types to estimate CO₂ emissions on a specific road segment. These results could be used to incorporate sustainability principles to highway geometric design.     

The treatment of traffic in the Dutch environmental outlooks: the role of science in policy making and policy evaluation

The Dutch National Institute of Public Health and Environmental Protection publishes Environmental Outlooks in which 25‐year projections are made. These Outlooks quantifying the environmental problems, form the scientific basis for Dutch environmental policy. Traffic and transport is one of the main sectors causing environmental problems. The emissions and energy use of all relevant categories (road traffic, non‐road traffic) are based on model simulations with models. This paper describes the main models used.

If present policy is implemented only a minority of the environmental targets will be met.

If a sustainable transport system for the Netherlands means a large reducton in CO₂ emissions and energy use after 2010 a stronger emphasis on both technical and non‐technical measures (such as land‐use planning combined with public transport improvements) for the period until 2010 is needed than proposed in the Second Transport Structure Plan, unless a sustainable energy source becomes available.     

A Multiple Criteria Decision‐Making Approach for Prioritizing Accident Hotspots in the Absence of Crash Data

Abstract

In an efficient transportation system, traffic safety is an important issue and it is influenced by many factors. In a country like Iran, until now safety improvements are mainly concentrated on road engineering activities, without much attention for vehicle technology or driving behaviour. One important aspect of road safety engineering activities is the so‐called treatment of hotspots or dangerous accident locations. Until recently, accident hotspots were identified and remedied by the esxperts’ personal judgements and a handful of statistics without taking into account other important factors such as geometric and traffic conditions of the road network. This paper therefore aims to define and identify the criteria for accident hotspots, then giving a value to each criterion in order to develop a model to prioritize accident hotspots when traffic accident data is not available. To do this, the ‘Delphi’ method has been adopted and a prioritization model is produced by the use of a ‘Multiple Criteria Decision‐Making’ method. The procedure is illustrated on a collection of 20 road sections in Iran. In addition, the model is validated against an existing database of road sections containing safe locations and hotspots. Finally, a sensitivity analysis is carried out on the proposed method.     

Uncertain socioeconomic projections used in travel demand and emissions models: could plausible errors result in air quality nonconformity?

A sensitivity analysis of plausible errors in population, employment, fuel price, and income projections is conducted using the travel demand and emissions models of the Sacramento, CA, USA, region for their transportation plan. The results of the analyses indicate that plausible error ranges for household income and fuel prices are not a significant source of uncertainty with respect to the region's travel demand and emissions projections. However, plausible errors in population and employment projections (within approximately one standard deviation) may result in the region's transportation plan not meeting the conformity test for nitrogens of oxides (NO_x) in the year 2005 (i.e., an approximately 16% probability). This outcome is also possible in the year 2015 but less likely (within approximately two standard deviations or a 2.5% probability). Errors in socioeconomic projections are only one of many sources of error in travel demand and emissions models. These results have several policy implications. First, regions like Sacramento that meet their conformity tests by a very small margin should rethink new highway investment and consider contingency transportation plans that incorporate more aggressive emissions reduction policies. Second, regional transportation planning agencies should conduct sensitivity analyses as part of their conformity analysis to make explicit significant uncertainties in the methods and to identify the probability of their transportation plan not conforming. Third, the US Environmental Protection Agency (EPA) should clarify the interpretation of “demonstrate” conformity of transportation plans; that is, specify the level of certainty that it considers a sufficient demonstration of conformity.     

Improving fuel consumption and CO2 emissions calculations in urban areas by coupling a dynamic micro traffic model with an instantaneous emissions model

Τhis study demonstrates the combination of a microscopic traffic simulator (AIMSUN) with an instantaneous emissions model (AVL CRUISE) to investigate the impact of traffic congestion on fuel consumption on an urban arterial road. The micro traffic model was enhanced by an improved car-following law according to Morello et al. (2014) and was calibrated to replicate measured driving patterns over an urban corridor in Turin, Italy, operating under adaptive urban traffic control (UTC). The method was implemented to study the impact of congestion on fuel consumption for the category of Euro 5 diesel <1.4 l passenger cars. Free flow and congested conditions led to respective consumption differences of −25.8% and 20.9% over normal traffic. COPERT 5 rather well predicted the impact of congestion but resulted to a much lower relative reduction in free flow conditions. Start and stop system was estimated to reduce consumption by 6% and 11.9% under normal and congested conditions, respectively. Using the same modelling approach, UTC was found to have a positive impact on CO₂ emissions of 8.1% and 4.5% for normal and congested conditions, respectively, considering the Turin vehicle fleet mix for the year 2013. Overall, the study demonstrates that the combination of detailed and validated micro traffic and emissions models offers a powerful combination to study traffic and powertrain impacts on greenhouse gas and fuel consumption of on road vehicles over a city network.     

Modeling regional mobile source emissions in a geographic information system framework

Suburban sprawl, population growth, and automobile dependency contribute directly to air pollution problems in US metropolitan areas. As metropolitan regions attempt to mitigate these problems, they are faced with the difficult task of balancing the mobility needs of a growing population and economy, while simultaneously lowering or maintaining levels of ambient pollutants. Although ambient air quality can be directly monitored, predicting the amount and fraction of the mobile source components presents special challenges. A modeling framework that can correlate spatial and temporal emission-specific vehicle activities is required for the complex photochemical models used to predict pollutant concentrations. This paper discusses the GIS-based modeling approach called the Mobile Emission Assessment System for Urban and Regional Evaluation (MEASURE). MEASURE provides researchers and planners with a means of assessing motor vehicle emission reduction strategies. Estimates of spatially resolved fleet composition and activity are combined with activity-specific emission rates to predict engine start and running exhaust emissions. Engine start emissions are estimated using aggregate zonal information. Running exhaust emissions are predicted using road segment specific information and aggregate zonal information. The paper discusses the benefits and challenges related to mobile source emissions modeling in a GIS framework and identifies future GIS mobile emissions modeling research needs.     

Sensitive analysis of emission rates in MOVES for developing site-specific emission database

With the rapid social and economic development, vehicle emissions have been identified as a major source of urban air pollutions in China. Therefore, the study on vehicle emission estimations is necessary. In light of the limitation of emission data for establishing a local comprehensive emission database, this paper analyzes the characteristics of emission rates in MOVES released by U.S. Environmental Protection Agency (EPA) to investigate the feasibility and to design a method for developing site-specific emission database. Sensitive analysis for model year, age group and speed interval is performed, and the regularity is concluded. The result shows that emission rates are almost constant with model year, but increase with age groups because of emission deterioration. With respect to speed intervals, the emission rates in 25–50 mph are higher than both those <25 mph and >50 mph in the same VSP (vehicle specific power) bins. In addition, an analysis of local emission data in Beijing is conducted to build the relationship between vehicle activities and emission rates. After that, a comparison of emission rates by VSP bins in MOVES and in local database is conducted in this study. The result shows that the absolute values are different because of regulatory emission standards, fuel quality, and other factors. However, the relative changes described by normalizing emission rates have a good consistency. Hence, the regularities of emission rates by VSP bins in MOVES can be used to develop local emission database in Beijing.     

The impact of road grade on carbon dioxide (CO2) emission of a passenger vehicle in real-world driving

To accurately estimate real-world vehicle emission at 1 Hz the road grade for each second of data must be quantified. Failure to incorporate road grade can result in over or underestimation of a vehicle’s power output and hence cause inaccuracy in the instantaneous emission estimate. This study proposes a simple LiDAR (Light Detection And Ranging) – GIS (Geographic Information System) road grade estimation methodology, using GIS software to interpolate the elevation for each second of data from a Digital Terrain Map (DTM). On-road carbon dioxide (CO₂) emissions from a passenger car were recorded by Portable Emission Measurement System (PEMS) over 48 test laps through an urban-traffic network. The test lap was divided into 8 sections for micro-scale analysis. The PHEM instantaneous emission model (Hausberger, 2003) was employed to estimate the total CO₂ emission through each lap and section. The addition of the LiDAR-GIS road grade to the PHEM modelling improved the accuracy of the CO₂ emission predictions. The average PHEM estimate (with road grade) of the PEMS measured section total CO₂ emission (n = 288) was 93%, with 90% of the PHEM estimates between 80% and 110% of the PEMS recorded value. The research suggests that instantaneous emission modelling with LiDAR-GIS calculated road grade is a viable method for generating accurate real-world micro-scale CO₂ emission estimates. The sensitivity of the CO₂ emission predictions to road grade was also tested by lessening and exaggerating the gradient profiles, and demonstrates that assuming a flat profile could cause considerable error in real-world CO₂ emission estimation.     

Modelling of the pavement acoustic longevity in Hong Kong through machine learning techniques

Traffic noise emission has long been a pervasive environmental and ecological problem, especially in the metropolitan cities with large-scale traffic network and high population density. Low noise road surface (LNRS) has been actively developed and applied as an effective measure to maintain the quieter environment of mobility service system. However, when LNRS is applied for noise abatement, the relationship between the acoustic performance and degradation of pavement has not been fully understood yet. To this end, this study aims to model the acoustic longevity of asphalt pavement as a function of the thickness, binder content, maximum aggregate size, and air void content of the pavement surface, as well as vehicle speed based on the long-term tyre-road noise data collected from 270 asphalt pavement sections in Hong Kong. Two machine learning techniques, namely artificial neural networks (ANN) and support vector machines (SVM), were employed and compared. It was found that both ANN and SVM could successfully model the pavement acoustic performance with acceptable model performance metrics. A case study showed that the ANN model was more aligned with the aging mechanisms of porous road surface, but the SVM model showed better training performance. The predicted acoustic deterioration rates of the porous surface case varied from −0.1 to 0.28 dB(A)/month rather than keeping a constant linear increasing trend, depending on pavement ageing periods and vehicle speed levels. The two-dimension sensitivity analysis (2D-SA) revealed the relative importance of pavement age and vehicle speed in controlling the acoustic performance.     

Methods of analysis for vehicle soak time data

Vehicle soak time, the duration of time a vehicle’s engine is at rest prior to being started, and its distribution function are important transportation activity data inputs for mobile emissions inventory estimation due to their impacts on vehicle start and evaporative emissions. This paper provides vehicle emission researchers with an overview of statistical analysis methods relevant to analyzing vehicle soak time data. Many of these methods are already in use in emissions research and have appeared in the literature. These methods are reviewed and further details regarding the implementation and interpretation of these methods are provided. Statistical methods relevant to the analysis of soak time data that have yet to appear in the emissions literature, including kernel density estimation and generalized linear models, are also introduced. Advantages and disadvantages of the methods are compared and theoretical justification is provided. Issues of correlated observations and censored data are discussed. General guidelines for the analysis of soak time data, such as stratification by start type and geographical region, are established. Finally, a subset of the statistical methods discussed is used to analyze the US Environmental Protection Agency’s 3-city data.