Multi-criteria approach for the selection of alternative options for environmentally sustainable transport system in Delhi

The present study examines the impact of including various qualitative criteria for the selection of alternative transportation options in Delhi. Three alternative transport options viz. 4-stroke 2-wheelers, CNG cars and CNG buses are prioritized based on six different criteria––energy saving potential (energy), emission reduction potential (environment), cost of operation (cost), availability of technology (technology), adaptability of the option (adaptability) and barriers to implementation (barrier). Based on quantitative criteria ‘energy’, ‘environment’ and ‘cost’, CNG car showed more potential in contributing to environmentally sustainable transport system in Delhi followed by 4-stroke 2-wheelers and CNG buses. Qualitative criteria viz. ‘technology’, ‘adaptability’ and ‘barriers’ in prioritization process resulted in higher priority for 4-stroke 2-wheelers followed by CNG bus and CNG car. Integrated quantitative and qualitative criteria gave a contrasting result as compared to that of the conventional quantitative approach and qualitative approach with highest priority for CNG bus followed by 4-stroke 2-wheelers and CNG car. This could explain the reasons for failure of many potential alternative urban transport options.     

Passengers’ Perceived Service Quality of City Buses in Taipei: Scale Development and Measurement

Abstract

To understand fully passengers’ perceptions and expectations of the bus service quality in Taipei, business managers and governmental agencies must seek a proper scale that can reflect passengers’ opinions accurately. This study develops and tests a service quality scale designed for a city bus transit system in Taipei. Churchill’s paradigm and a focus group interview were combined into a multistage scale development procedure. Based on the procedure, Taipei city buses were selected as the example, for which a service quality scale was developed. The final scale contains four dimensions and 20 items. These four dimensions are ‘interaction with passengers’, ‘tangible service equipment’, ‘convenience of service’ and ‘operating management support’. Finally, the results of scale development and the managerial applications of the service quality scale for the city transit system are discussed.     

Maximizing bus discharge flows from multi-berth stops by regulating exit maneuvers

Upon having loaded and unloaded their passengers, buses are often free to exit a multi-berth bus stop without delay. A bus need not wait to perform this exit maneuver, even if it requires circumventing one or more other buses that are still dwelling in the stop’s downstream berths. Yet, many jurisdictions impose restrictions on bus entry maneuvers into a stop to limit disruptions to cars and other buses. Buses are typically prohibited from entering a stop whenever this would require maneuvering around other buses still dwelling in upstream berths. An entering bus is instead required to wait in queue until the upstream berths are vacated.Analytical models are formulated to predict how bus discharge flows from busy, multi-berth stops are affected by allowing buses to freely exit, but not freely enter berths. These models apply when: a bus queue is always present at the stop’s entrance; buses depart the entry queue and enter the stop as per the restriction described above; and the stop is isolated from the effects of nearby traffic signals and other bus stops. We find that for these restricted-entry stops, bus-carrying capacities can often be improved by regulating the exit maneuvers as well. This turns out to be particularly true when the stop’s number of berths is large. Simulations show that these findings still hold when a stop is only moderately busy with entry queues that persist for much, but not all of the time. The simulations also indicate that removing any restrictions on bus exit maneuvers is almost always productive when stops are not busy, such that short entry queues form only on occasion, and only for short periods. We argue why certain simple policies for regulating exit maneuvers would likely enhance bus-stop discharge flows.     

Enablers and Barriers to the Adoption of Alternatively Powered Buses

Abstract

This paper seeks to identify enablers and barriers that stimulate or prevent the adoption of alternatively powered buses (APBs) in cities. The research method concentrates on an in‐depth analysis of 21 European demonstration case studies of APBs. Considerable differences exist between these cities due to the different reference situation. The type of measurement and the situation in the demonstration cities influence the exact fuel consumption and emission reduction. Variables that could enable the adoption of all types of APBs are: (1) the compatibility with previously introduced ideas; (2) the already available necessary supporting infrastructure in the city; (3) a changed external appearance of the APB; (4) the acceptance of the APBs by passengers and bus drivers; and (5) political support in the city regarding the APBs. The main variables that could be determined as barriers are: the relative economic advantage (the outline of costs is higher than that of conventional buses); and the understanding of the APB for bus drivers and mechanics (because special training is needed for both groups).     

Evaluating bus transit performance of Chinese cities: Developing an overall bus comfort model

In order to improve the level of bus service, a field study was undertaken to develop a combined bus comfort model. This paper provides a comprehensive review of the different ways to predict the bus comfort, in addition to the variable experimental techniques used. It was found some environment parameters like noise, vibration, thermal comfort and the acceleration would affect the passengers’ experience. In this model, both the measurement of objective physical parameters and subjective questionnaire survey were conducted to gather the practical environment date, as well as to distribute questionnaires on board city buses during the same trips. By comparing the subjective views of bus passengers to objective physical parameters, a combined bus comfort model was established. This model helps to calculate the concrete value of passengers’ perceived bus comfort. An effective approach integrated the comfort model, measuring instrument and the driver monitor could greatly improve the bus service quality.     

Modeling the interaction between buses,passengers and cars on a bus route using a multi-agent system

This paper models part of a public transport network (PTN), specifically, a bus route, as a small-size multi-agent system (MAS). The proposed approach is applied to a case study considering a ‘real world’ bus line within the PTN in Auckland, New Zealand. The MAS-based analysis uses modeling and simulation to examine the characteristics of the observed system – autonomous agents interacting with one another – under different scenarios, considering bus capacity and frequency of service for existing and projected public transport (PT) demand. A simulation model of a bus route is developed, calibrated and validated. Several results are attained, such as when the PT passenger load is not close to bus capacity, this load has no effect on average passenger waiting time at bus stops. The model proposed can be useful to practitioners as a tool to model the interaction between buses and other agents.     

Natural variability in exposure to fine particles and their trace elements during typical workdays in an urban area

Studies on the natural human exposures to fine particulate matter (PM_2.5) and their elements composition are practically non-existent in South America. In order to understand the natural exposure of the typical Brazilian population to PM_2.5 and their trace element composition, we measured PM_2.5 concentrations and collected mass on filters for nine continuous hours during a typical workday of volunteers. In addition, bus routes were performed at peak and non-peak periods, mimicking the routine activity of the population. Mean concentrations of PM_2.5 in the bus and car groups were similar while the fraction of BCe was higher for the bus group. For all routes, mean PM_2.5 concentrations were higher during peak than non-peak hours, with an average of 43.5 ± 33.1 μg m⁻³ and 14.3 ± 10.2 μg m⁻³, respectively. The trace elements S, K and Na originated mainly from vehicle emissions; Na was associated with the presence of biofuel in diesel. Toxic elements (Pb, Cr, Cu, Ni, Zn, Mn) were found at low levels as evident by the total hazard index that ranged from 2.15 × 10⁻⁰³ to 1.38 for volunteers. For all routes, the hazard index ranged from 2.25 × 10⁻⁰³ to 5.03. Average PM_2.5 respiratory deposition dose was estimated to be 0.60 μg/kg-hour for peak hours. Potential health damages to people during their movements and at workplaces close to the traffic were identified. Improvements in the design of the building to reduce the entrance of air pollutants as well as the use of filters in the buses could help to limit population exposure.     

Alternative information technologies for the provision of spatial information to public transport passengers in France,Germany and Spain

In France, Germany and Spain, the availability of computer‐generated itineraries to travellers in the street is still very limited, though growing slowly. Although many French towns have an effective passenger information system via Minitel, which will calculate itineraries, this is available only from the home. The vast majority of decisions about routes for journeys by urban public transport are still made using the traditional forms of spatial information abundantly displayed at bus stops and in vehicles: usually a map of the network and diagrammatic maps of individual bus or underground lines. Unfortunately a map of the whole network is often too complicated to yield the desired information easily. Alternatively the traveller may have the difficult task of comparing several diagrammatic maps of the individual lines departing from that bus stop, none of which alone can answer his spatial query: which bus lines, if any, go to my destination? The priority for the application of the computer should be the use of a geographic information system to generate automatically two types of less‐complicated map. The ‘stop‐specific route map’ shows on one piece of paper the routes of all buses from that stop, excluding of course the portions before the stop. The ‘zone map’ shows only the bus lines which serve a specific limited zone of the city, including at a reduced scale the portions extending out to their various destinations beyond the limits of the zone itself.     

Bus maintenance systems and maintenance scheduling: model formulations and solutions

This paper deals with the problem of scheduling bus maintenance activities. The scheduling of maintenance activities is an important component in bus transit operations planning process. The other components include network route design, setting timetables, scheduling vehicles, and assignment of drivers. This paper presents a mathematical programming approach to the problem. This approach takes as input a given daily operating schedule for all buses assigned to a depot along with available maintenance resources. It, then, attempts to design daily inspection and maintenance schedules for the buses that are due for inspection so as to minimize the interruptions in the daily bus operating schedule, and maximize the utilization of the maintenance facilities. Three integer programming formulations are presented and different properties of the problem are discussed. Several heuristic methods are presented and tested. Some of these procedures produce very close to optimal solutions very efficiently. In some cases, the computational times required to obtain these solutions are less than 1% of the computational time required for the conventional branch and bound algorithm. Several small examples are offered and the computational results of solving the problem for an actual, 181-bus transit property are reported.     

Scheduling lane conversions for bus use on city-wide scales and in time-varying congested traffic

The paper explores what can occur when select street lanes throughout a city are periodically reserved for buses. Simulations of an idealized city were performed to that end. The city’s time-varying travel demand was studied parametrically. In all cases, queues formed throughout the city during a rush, and dissipated during the off-peak period that followed. Bus lanes were activated all at once across the city, and were eventually deactivated in like fashion. Activation and deactivation schedules varied parametrically as well. Schedules that roughly balanced the trip-time savings to bus riders against the added delays to car travelers were thus identified.Findings reveal why activating conversions near the start of a rush can degrade travel, both by car and by bus. Balance was struck by instead activating lane conversions nearer the end of the rush, when vehicle accumulation in the city was at or near its maximum. Most of the time savings to bus riders accrued after the conversions had been left in place for only 30 min. Leaving them for longer durations often brought modest additional savings to bus travelers. Yet, the added delays to cars often grew large as a result.These findings held even when buses garnered high ridership shares. This was the case when lane conversions gradually induced new bus trips among residents who formerly did not travel. It was also true when high ridership was a pre-existing feature of the city. Activating conversions a bit earlier in a rush was found to make sense only if commuters shifted from cars to buses in very large numbers. Findings also unveiled how to fine-tune activation and deactivation schedules to suit a city’s congestion level. Guidelines for scheduling conversions in real settings are furnished. So is discussion on how these schedules might be adapted to daily variations in city-wide traffic states. Roles for technology are discussed as well.     

Examining the benefits of using bio-CNG in urban bus operations

Public service fleets offer an attractive option for introducing new renewable fuels on a large scale, which allow for the reduction of both greenhouse gas emissions and exhaust air pollutants. This study examines the use of biomethane (bio-CNG) and compressed natural gas for part of the bus fleet in Dublin, Ireland. The emissions produced from the 2008 fleet based at one of the city’s seven bus depots are compared to use of new diesel and bio-CNG buses. The optimum feedstock for bio-CNG production in Ireland was then investigated, as well as the quantity of feedstock needed to produce the required bio-CNG to fuel the bus fleet examined. As expected the results showed a substantial decrease in all exhaust emissions from the use of bio-CNG buses compared the 2008 fleet. Grass silage was chosen as the optimum feedstock for production of bio-CNG in Ireland.     

An improved headway-based holding strategy for bus transit

Abstract

This paper presents an improved headway-based holding strategy integrating bus transit travel and dwelling time prediction. A support vector machine-based (SVM) model is developed to predict the baseline travel and dwell times of buses based on recent data. In order to reduce prediction errors, an adaptive algorithm is used together with real-time bus operational information and estimated baseline times from SVM models. The objective of the improved holding strategy is to minimize the total waiting times of passengers at the current stop and at successive stops. Considering the time-varying features of bus running, a ‘forgetting factor’ is introduced to weight the most recent data and reduce the disturbance from unexpected incidents. Finally, the improved holding strategy proposed in this study is illustrated using the microscopic simulation model Paramics and some conclusions are drawn.     

Assessing the quality of intercity road transportation of passengers: An exploratory study in Brazil

In Brazil, buses represent the main mode of public transportation. However, in recent years intercity and interstate bus companies have been facing a growing competition with other forms of transportation such as bus companies competitors, illegal transportation companies, chartered buses, and, more recently, air companies. In this scenario characterized by growing competition, it is essential to evaluate the quality of road transportation of passengers. In order to contribute to the analysis of this issue, this paper presents a methodological approach to assess the quality of intercity road transportation of passengers, according to the customers’ perspective. By conducting a case study in a city of almost 500,000 inhabitants from the interior of Rio de Janeiro, an Importance–Satisfaction Analysis (ISA) and an assignment procedure were used in order to obtain: (i) the main factors (criteria) that influence the quality of service intercity road transportation of passengers, (ii) the importance degree of criteria related to road transportation of passengers, (iii) the satisfaction of the users of road transportation under the considered criteria, (iv) the critical criteria/items, and (v) the categories which best represent the quality of service intercity road transportation according to the passengers’ perspective. Finally, several possible corrective actions to improve the quality of services considering each critical item/criterion were highlighted and special recommendations were done for the critical process (ticket sales).     

Life cycle ownership cost and environmental externality of alternative fuel options for transit buses

This paper assesses alternative fuel options for transit buses. We consider the following options for a 40-foot and a 60-foot transit bus: a conventional bus powered by either diesel or a biodiesel blend (B20 or B100), a diesel hybrid-electric bus, a sparking-ignition bus powered by Compressed Natural Gas (CNG) or Liquefied Natural Gas (LNG), and a battery electric bus (BEB) (rapid or slow charging). We estimate life cycle ownership costs (for buses and infrastructure) and environmental externalities caused by greenhouse gases (GHGs) and criteria air pollutants (CAPs) emitted from the life cycle of bus operations. We find that all alternative fuel options lead to higher life cycle ownership and external costs than conventional diesel. When external funding is available to pay for 80% of vehicle purchase expenditures (which is usually the case for U.S. transit agencies), BEBs yield large reductions (17–23%) in terms of ownership and external costs compared to diesel. Furthermore, BEBs’ advantages are robust to changes in operation and economic assumptions when external funding is available. BEBs are able to reduce CAP emissions significantly in Pittsburgh’s hotspot areas, where existing bus fleets contribute to 1% of particulate matter emissions from mobile sources. We recognize that there are still practical barriers for BEBs, e.g. range limits, land to build the charging infrastructure, and coordination with utilities. However, favorable trends such as better battery performance and economics, cleaner electricity grid, improved technology maturity, and accumulated operation experience may favor use of BEBs where feasible.     

The economics of bus deregulation in Britain

This paper reviews some of the arguments which have been put forward on the economics of bus deregulation, particularly the paper by Gwilliam and others. It argues that the experience of road haulage licensing is relevant. The evidence there suggests that liberalization has not had the adverse effects that many predicted and that in most respects one could expect bus deregulation to have no less favourable consequences. The main difference between buses and road haulage is over how far bus drivers might revert to the old practices of the 1920s of chasing, tailing, etc. which were said at the time to be a major cause of consumer dissatisfaction. The paper reviews the economics of some of these practices and suggests which might be discounted and which need further attention.     

Transit user perceptions of driverless buses

This paper reports the results of a stated preference survey of regular transit users’ willingness to ride and concerns about driverless buses in the Philadelphia region. As automated technologies advance, driverless buses may offer significant efficiency, safety, and operational improvements over traditional bus services. However, unfamiliarity with automated vehicle technology may challenge its acceptance among the general public and slow the adoption of new technologies. Using a mixed logit modeling framework, this research examines which types of transit users are most willing to ride in driverless buses and whether having a transit employee on board to monitor the vehicle operations and/or provide customer service matters. Of the 891 surveyed members of University of Pennsylvania’s transit pass benefit program, two-thirds express a willingness to ride in a driverless bus when a transit employee is on board to monitor vehicle operations and provide customer service. By contrast, only 13% would agree to ride a bus without an employee on board. Males and those in younger age groups (18–34) are more willing to ride in driverless buses than females and those in older age groups. Findings suggest that, so long as a transit employee is onboard, many transit passengers will willingly board early generation automated buses. An abrupt shift to buses without employees on board, by contrast, will likely alienate many transit users.

     

Energy consumption and cost-benefit analysis of hybrid and electric city buses

This paper presents a cost-benefit analysis (CBA) of hybrid and electric city buses in fleet operation. The analysis is founded on an energy consumption analysis, which is carried out on the basis of extensive simulations in different bus routes. A conventional diesel city bus is used as a reference for the CBA. Five different full size hybrid and electric city bus configurations were considered in this study; two parallel and two series hybrid buses, and one electric city bus. Overall, the simulation results indicate that plug-in hybrid and electric city buses have the best potential to reduce energy consumption and emissions. The capital and energy storage system costs of city buses are the most critical factors for improving the cost-efficiency of these alternative city bus configurations. Furthermore, the operation schedule and route planning are important to take into account when selecting hybrid and electric city buses for fleet operation.     

Analysis of intended bus usage

In order to plan bus operations, it is necessary for transit planners to understand what factors may influence travelers’ choice of buses for travels within a city. The proposed method involves various scenarios of a hypothetical bus operation which was rated by a group of individuals.

Analysis of Covariance technique is employed to analyze people's sensitivities to their perceived levels of bus service characteristics. The technique involves:

1. testing for the significant effects of varying levels of service characteristics upon people's intentions to use bus service, and

2. assessing differences among various population segments in their sensitivity patterns towards bus service characteristics.

Results from the application of the technique to attitudinal data collected by the Orange County Transit District indicate that bus service characteristics do influence, independently and jointly, respondents’ stated intentions to use buses.

Sensitivity pattern differed across the five homogeneous segments identified in an earlier research based on socioeconomic characteristics.

One segment (an older, predominatly male population segment with higher home ownership level and lower income than the rest of the sample) was relatively insensitive to changes in bus fare and was influenced by changes in headway independent of changes in access distance. Another segment consisting of fewer registered voters with lower education also exhibited similar independent impact of headway and access distance.

The technique is especially useful in reducing a large number of proposed alternative bus systems to a smaller set for further planning considerations by specifying the ranges within which variation of service characteristic would cause substantial changes in the intended usage responses.     

The effects of eco-driving motivation,knowledge and reward intervention on fuel efficiency

Every year, bus companies consume millions of litres of fuel, and their fuel costs often exceed millions of US dollars. These companies have an obvious interest in reducing their fuel consumption. One way to encourage drivers to engage in eco-driving behaviours, as well as their related beliefs, is to use a monetary reward system. The aim of this study was to explore the incentive effects of such a reward system to encourage better driving behaviours among bus drivers. This study collected fuel-efficiency data before and after the implementation of a reward system. Furthermore, to study the effects that the system had on driver behaviours, this study adopted the theory of Motivation–Opportunity–Ability (MOA) to construct the regression model. The results for the average fuel consumption efficiency for the buses before and after the reward system was introduced showed an improvement of more than 10% and thus a reduction in carbon emissions.     

Reduction of capacity and projected costs associated with seat belt installation on school buses

This study examines the potential effects the installation of seat belts on school buses would have on the fleet capacity in Alabama and the resulting cost implications. The study also documents the myriad research studies and professional opinions offered on the potential safety effects of equipping school buses with safety restraints/seat belts. Four seat configurations for the school buses were analyzed. The first configuration represents the most common current bus seating configuration without seat belts, 3 seats on each side of the aisle and 12 rows (3/3-12). The physical space required for seat belt hardware may result in a loss of a row of seats and may reduce the number of students seated per row. Thus, three more configurations were studied: loss of a row of seats (3/3-11), loss of one seat per row (3/2-12), and loss of both a row of seats and a seat per row (3/2-11). The capacity for each configuration for each bus using current pupil loads was determined. The costs associated with installation of seat belts, and purchase and operation of new buses were obtained. Should school bus seat belts become mandatory in Alabama, the results obtained in this study can be used by any school system to determine the optimum configuration for their pupils, which will identify the number of additional buses that must be purchased by the school system. This study found that many of the buses that would become overloaded due to seat belt installation and the resultant loss of seating will be carrying only a few excess pupils. Transportation supervisors may be able to handle such overloads by transferring these pupils to other buses or by adjusting their bus routes to minimize purchase of new buses. Additional suggestions for handling bus overloads were offered in the body of this report.