External Costs of Domestic Container Transportation: Short‐Sea Shipping versus Trucking in Taiwan

Abstract

This paper explores the external costs of domestic container transportation in Taiwan by analysing the origin and destination of current container cargoes. After reviewing an extensive literature survey of methods of external cost, a comparison of external costs between trucking and short sea shipping (SSS) by corridor is made by using a model developed in this paper. Based on the findings that external costs of SSS are considerably lower than truck transport and can be a viable alternative to current domestic container cargo transportation, we discuss the significance and managerial implications of SSS from the perspective of green logistics. In so doing, a top‐down approach is employed for developing government policies, which aim to not only reduce the external costs of domestic container transportation but also promote SSS in Taiwan.     

Liner container assignment model with transit-time-sensitive container shipment demand and its applications

This paper proposes a practical tactical-level liner container assignment model for liner shipping companies, in which the container shipment demand is a non-increasing function of the transit time. Given the transit-time-sensitive demand, the model aims to determine which proportion of the demand to fulfill and how to transport these containers in a liner shipping network to maximize the total profit. Although the proposed model is similar to multi-commodity network-flow (MCNF) with side constraints, unlike the MCNF with time delay constraints or reliability constraints that is NP-hard, we show that the liner container assignment model is polynomially solvable due to its weekly schedule characteristics by developing two link-based linear programing formulations. A number of practical extensions and applications are analyzed and managerial insights are discussed. The polynomially solvable liner container assignment model is then applied to address several important decision problems proposed by a global liner shipping company.     

Longer and heavier vehicles in Belgium: A threat for the intermodal sector?

To achieve transport cost reductions and to reduce the environmental impact of road transport, different European countries are allowing or testing longer and heavier vehicles on their road network. In Belgium, the Flanders region started a trial in 2015 allowing a limited number of longer and heavier vehicles on a selection of approved routes. A concern among intermodal operators is however that an allowance of longer and heavier vehicles could trigger a reverse modal shift away from rail and inland waterways container transport. Starting from experiences in other European countries, this paper discusses the potential spatial impact of allowing longer and heavier vehicles on the market areas of intermodal transhipment terminals using a geographic information systems-based location analysis model. In a second step, external transport costs are incorporated in this model, to quantify the spatially diversified societal costs of a potential reverse modal shift.     

Intermodal freight transport planning – A receding horizon control approach

This paper investigates intermodal freight transport planning problems among deep-sea terminals and inland terminals in hinterland haulage for a horizontally fully integrated intermodal freight transport operator at the tactical container flow level. An intermodal freight transport network (IFTN) model is first developed to capture the key characteristics of intermodal freight transport such as the modality change phenomena at intermodal terminals, physical capacity constraints of the network, time-dependent transport times on freeways, and time schedules for trains and barges. After that, the intermodal freight transport planning problem is formulated as an optimal intermodal container flow control problem from a system and control perspective with the use of the proposed IFTN model. To deal with the dynamic transport demands and dynamic traffic conditions in the IFTN, a receding horizon intermodal container flow control (RIFC) approach is proposed to control and to reassign intermodal container flows in a receding horizon way. This container flow control approach involves solving linear programming problems and is suited for transport planning on large-sized networks. Both an all-or-nothing approach and the proposed RIFC approach are evaluated through simulation studies. Simulation results show the potential of the proposed RIFC approach.     

A set-covering model for a bidirectional multi-shift full truckload vehicle routing problem

This paper introduces a bidirectional multi-shift full truckload transportation problem with operation dependent service times. The problem is different from the previous container transport problems and the existing approaches for container transport problems and vehicle routing pickup and delivery are either not suitable or inefficient. In this paper, a set covering model is developed for the problem based on a novel route representation and a container-flow mapping. It was demonstrated that the model can be applied to solve real-life, medium sized instances of the container transport problem at a large international port. A lower bound of the problem is also obtained by relaxing the time window constraints to the nearest shifts and transforming the problem into a service network design problem. Implications and managerial insights of the results by the lower bound results are also provided.     

Exploring transport carbon futures using population microsimulation and travel diaries: Beijing to 2030

Evaluating transport policy for cities in developing countries is often constrained by data availability that limits the use of conventional appraisal models. Here, we present a new ‘bottom-up’ methodology to estimate transport CO₂ emission from daily urban passenger travel for Beijing, a megacity with relatively sparse data on travel behaviour. A spatial microsimulation, based on an activity diary survey and two sample population censuses, is used to simulate, for Beijing’s urban districts, a realistic synthetic population, and their daily travel and CO₂ emission over 2000–2010. This approach provides greater insight into the spatial variability of transport CO₂ emission than has previously been possible for Beijing, and further, enables an examination of the role of socio-demographics, urban form and transport developments in contributing to emissions over the modelled period.Using the 2000–2010 CO₂ emission estimates as a baseline, CO₂ emissions from passenger travel are then modelled to 2030 under scenarios exploring politically plausible strategies on transport (public transport infrastructure investment, and vehicle constraint), urban development (compaction) and vehicle technology (faster adoption of clean vehicle technology). The results showed that, compared to the trend scenario, employing both transport and urban development policies could reduce total passenger CO₂ emission to 2030 by 24%, and by 43% if all strategies were applied together. The study reveals the potential of microsimulation in emission estimation for large cities in developing countries where data availability may constrain more traditional approaches.     

The impact of terminal handling charges on overall shipping charges: an empirical study

Before the introduction of terminal handling charges (THCs), traditional freight rates included both ocean freight charges and terminal charges at ports. Since the introduction of THCs in 1991, the freight rate has become a “port-to-port” charge that covers only the sea leg, while the on-shore costs of using the container terminals are charged separately as THCs. Although both THCs and freight rates are collectively set by conferences, in this study we argue that the former are easier to enforce because they are invariant to other attributes such as haulage distance, inland transport services and types of commodity being shipped. This argument is consistent with the empirical findings from this study that suggest the separation of ocean freight rates from terminal charges has increased the overall shipping charges. In addition, we find that THCs affect the Hong Kong container handling industry by lowering its throughput.     

The relation between daily travel and use of the home computer

On the basis of the Norwegian national personal travel survey (NPTS) 1997/98 and a connected mail back survey of the use of information – and communication technology at home, the relation between mobility and use of stationary communication has been studied. On the basis of these results we cannot see any direct substitutionary effects of the use of stationary technology at people's home on the use of mobile technology. Access to and use of information technology seems not to have a significant impact on travel activities in everyday life. Stationary communication seems to be a supplement to activities based on mobile technology. For people who work more than “normal” weekly working hours, stationary technology seems to give them greater flexibility in regard to where to work, but it does not necessarily reduce their travel activity. There is a tendency that people who own home computers make less work trips, but this does not affect the total number of daily trips. The spatial flexibility give a temporal flexibility, which means that work trips and other trips can be more dispersed over the day than is the situation today. The positive consequence can be a reduction in the rush-hour traffic; the negative is that it is more difficult to offer a high frequent public transport service when travel needs are more spread in time. Ownership and use of both mobile and stationary technologies are unequally distributed. Men, people with high education and income are the most frequent owners and users.     

In Search of the Link between Ship Size and Operations

Abstract

Since 1990s the liner shipping industry has faced a period of restructuring and consolidation, and been confronted with a continuing increase in container vessel scale. The impact of these changes is noticeable in trade patterns, cargo handling methods and shipping routes, in short ‘operations’. After listing factors influencing size, growth in container ship size is explained by economies of scale in deploying larger vessels. In order to quantify economies of scale, this paper uses the liner service cash flow model. A novelty in the model is the inclusion of +6000-20-foot Equivalent Unit (TEU) vessels and the distinction in costs between single and twin propeller units on ships. The results illustrate that scale economies have been – and will continue to be – the driving force behind the deployment of larger container vessels. The paper then assesses the link between ship size and operations, given current discussions about the increase in container vessel scale. It is found that (a) ship size and operations are linked; (b) optimal ship size depends on transport segment (deep-sea vs. short-sea shipping, SSS), terminal type (transhipment terminals vs. other terminals), trade lane (East-West vs. North-South trades) and technology; and (c) a ship optimal for one trade can be suboptimal for another.     

An analysis of rail freight operational efficiency and mode share in the British port-hinterland container market

The growth in container shipping poses considerable challenges to efforts to reduce the negative externalities associated with freight transport. There are particular concerns about the impacts of the associated port-hinterland freight flows. Through empirical research, this paper examines trends in the operational efficiency of the British port-hinterland container rail freight market and to assess the impacts of any changes on the overall sustainability of this market. Original survey work conducted in 2007 and 2015 has allowed longitudinal and cross-sectional analysis of the characteristics of this market.The survey findings reveal that rail’s mode share of port container throughput (in TEU) has increased from 14.7% in 2007 to 16.6% in 2015 and it is likely that its share of the associated hinterland activity has also risen. Rail was carrying 25% more TEU by 2015 without an increase in train service provision. Increases in mean train capacity and mean load factor were observed, leading to growth in the mean train load from 44 TEU in 2007 to 55 TEU in 2015. This considerable improvement in operational efficiency is expected to have reduced the negative externalities per unit of transport activity associated with the rail-borne hinterland container flows, though scope is identified for further improvements in sustainability.     

Coordination problems in container barging in the port of Rotterdam: an institutional analysis

Container barging has gained in importance in port-related transport along with the need for sustainable transport. Nevertheless, coordination problems between terminal operator and barge operator exist, and performance lags behind. This paper analyses factors that may hinder or stimulate a better future performance of container barging in the port of Rotterdam. A case study is accomplished and guided by a framework rooted in Institutional Economics. Despite favourable conditions set by governments and the port authority, the share of container barging has hardly grown. The container barging sector in Rotterdam is embedded in a history with many alliances, a high degree of organisation, and a good track record in the development of institutional arrangements to solve coordination problems. However, the present contractual relations in the transport chain form an inadequate condition. From a theoretical perspective, the paper shows the value of studying port-related transport chains by acknowledging their institutional context.     

Traffic consolidation in East Asian container ports: A network flow analysis

The proliferation of hub-and-spoke operations in maritime container transportation has resulted in the widespread consolidation of traffic flows. Utilising liner shipping network configurations, this paper assesses the impact of freight traffic consolidation in the container port industry by exploring the spatial pattern of traffic flow movements and identifying the variety of roles that container ports play within this context. On the basis of the network concept, the spatial inequality of freight traffic consolidation is determined by the density and direction of all meaningful connections (i.e. significant flows) identified by applying Multiple Linkage Analysis (MLA) to an initial traffic flow matrix.The effectiveness of the chosen methodology is tested empirically using a sample comprising the 18 major container ports in East Asia, together with another 21 important container ports located on the East–West trading route. Based on this sample network, the spatial structure of traffic flow consolidation reveals the nature and structure of hub-and-spoke operations within a port system, the relative hub-dependence of ports, the variety of roles which individual ports play within the overall structure of inter-port interactions and the hierarchical configuration of the port industry structure. The paper concludes that MLA offers new insights into the distributional inequality of traffic flows, the spatial and economic interactions between ports and the extent to which hinterlands overlap. Furthermore, the analysis clearly shows that inter-port relationships can no longer be evaluated as isolated phenomena; any change in a specific port’s competitiveness will directly impact upon the structure of the whole maritime transportation system. Port authorities and terminal operators will need, therefore, to carefully analyse and disentangle specific inter-port relationships in order to provide the most appropriate basis for their decision making.     

Profit-based maritime container assignment models for liner shipping networks

We propose the problem of profit-based container assignment (P-CA), in which the container shipment demand is dependent on the freight rate, similar to the “elastic demand” in the literature on urban transportation networks. The problem involves determining the optimal freight rates, the number of containers to transport and how to transport the containers in a liner shipping network to maximize the total profit. We first consider a tactical-level P-CA with known demand functions that are estimated based on historical data and formulate it as a nonlinear optimization model. The tactical-level P-CA can be used for evaluating and improving the container liner shipping network. We then address the operational-level P-CA with unknown demand functions, which aims to design a mechanism that adjusts the freight rates to maximize the profit. A theoretically convergent trial-and-error approach, and a practical trial-and-error approach, are developed. A numerical example is reported to illustrate the application of the models and approaches.     

Automated shunting of rail container wagons in ports and terminal areas

The development of intermodal container transport is hampered in part by the cost associated with the shunting of trains in marshalling yards, inland and port railway terminals. Many new technologies have been developed in the past decade, but have still not been applied because of high capital investment costs, lack of sufficient market demand and uncertain rates of return. The key for increasing the competitiveness of intermodal container transport by rail is the operation of heavy haul container trains between port and inland railway terminals more frequently with fast, flexible and automatic transhipment, shunting and coupling of container wagons. The operation of self-driven railcars equipped with automatic centre coupling on terminal tracks, which can also be train-hauled on conventional hinterland railway lines, would enable a reduction of shunting and transhipment time and costs in intermodal container terminals by more than 30%.     

A tabu search algorithm to solve the integrated planning of container on an inter-terminal network connected with a hinterland rail network

Transport demand for containers has been increasing for decades, which places pressure on road transport. As a result, rail transport is stimulated to provide better intermodal freight transport services. This paper investigates mathematical models for the planning of container movements in a port area, integrating the inter-terminal transport of containers (ITT, within the port area) with the rail freight formation and transport process (towards the hinterland). An integer linear programming model is used to formulate the container transport across operations at container terminals, the network interconnecting them, railway yards and the railway networks towards the hinterland. A tabu search algorithm is proposed to solve the problem. The practical applicability of the algorithm is tested in a realistic infrastructure case and different demand scenarios. Our results show the degree by which internal (ITT) and external (hinterland) transport processes interact, and the potential for improvement of overall operations when the integrated optimization proposed is used. Instead, if the planning of containers in the ITT system is optimized as a stand-alone problem, the railway terminals may suffer from longer delay times or additional train cancellations. When planning the transport of 4060 TEU containers within one day, the benefits of the ITT planning without considering railway operations account for 17% ITT cost reduction but 93% railway operational cost growth, while the benefits of integrating ITT and railway account for a reduction of 20% in ITT cost and 44% in railway operational costs.     

A queuing model analysis of the performance of the Hong Kong container terminals

The growth of container‐handling industry and its impact on Hong Kong's economy have aroused considerable attention in recent decades. Within the recent twenty years, the rapid growth of container‐handling industry has led Hong Kong to become one of the world's busiest container port with over 11 million T.E.U. s (Twenty Feet Equivalent Units) container throughput in one year period. Also the container throughput is expected to reach 15.5 million T.E.U. s by year 2004.

As the success of container‐handling industry is significant, many studies have been conducted relating to this subject. In this paper, an application of a queuing theory model to Kwai Chung Container Terminals is developed and described. Specifically, we consider seasonal changes at the Terminals and focus on their effects on inter‐arrival time and service time of container vessel.

A crucial component of the study relates to the empirical data collected. Besides verifying the validity of the model, those data provide guidelines for developing schemes to manage the seasonal fluctuation of container throughput of the Terminals.     

Using connected vehicle technology to improve the efficiency of intersections

Information from connected vehicles, such as the position and speed of individual vehicles, can be used to optimize traffic operations at an intersection. This paper proposes such an algorithm for two one-way-streets assuming that only a certain percentage of cars are equipped with this technology. The algorithm enumerates different sequences of cars discharging from the intersection to minimize the objective function. Benefits of platooning (multiple cars consecutively discharging from a queue) and signal flexibility (adaptability to demand) are also considered. The goal is to gain insights about the value (in terms of delay savings) of using connected vehicle technology for intersection control.Simulations are conducted for different total demand values and demand ratios to understand the effects of changing the minimum green time at the signal and the penetration rate of connected cars. Using autonomous vehicle control systems, the signal could rapidly change the direction of priority without relying on the reaction of drivers. However, without this technology a minimum green time is necessary. The results of the simulations show that a minimum green time increases the delay only for the low and balanced demand scenarios. Therefore, the value of using cars with autonomous vehicle control can only be seen at intersections with this kind of demand patterns, and could result in up to 7% decrease in delay. On the other hand, using information from connected vehicles to better adapt the traffic signal has proven to be indeed very valuable. Increases in the penetration rate from 0% up to 60% can significantly reduce the average delay (in low demand scenarios a decrease in delay of up to 60% can be observed). That being said, after a penetration rate of 60%, while the delays continue to decrease, the rate of reduction decreases and the marginal value of information from communication technologies diminishes. Overall, it is observed that connected vehicle technology could significantly improve the operation of traffic at signalized intersections, at least under the proposed algorithm.     

Monitoring urban spatial dynamics

As urban systems increase in size and diversity, the factors which influence spatial change increase in number and their interactions become more complex. Increasing emphasis is thus being placed by some governments and agencies on regular reviews of policies and programs, to ensure that they are consistent with and facilitate the evolving urban form. Consequently, the monitoring of urban transport and activity systems is of increasing importance, to aid the review processes. This paper considers the progress which has been made in and use of procedures for monitoring urban, transport-related spatial changes. The specification, estimation and presentation of appropriate indicators is briefly discussed. Experience with the use of spatial monitoring procedures on data for two Australian cities has revealed several possible implications for transport investment practice and the development of monitoring and modelling procedures. These are discussed and the paper then indicates the approach which is currently being taken at ARRB towards developing a monitoring system.     

广西沿海铁路建设双层集装箱通道必要性研究

广西沿海铁路作为大西南的重要出海通道,是防城、钦州、北海等重要沿海港口主要的后方集疏运干线。文章提出了广西沿海铁路开行双层集装箱列车的意义,预测了广西沿海铁路集装箱的运量,从经济与通过能力方面分析了广西沿海铁路开行双层集装箱列车的必要性。     

Should subsidies to urban passenger transport be increased? A spatial CGE analysis for a German metropolitan area

In many countries passenger transport is significantly subsidized in a variety of ways for various reasons. The objective of this paper is to examine efficiency, distributional, environmental (CO₂ emissions) and spatial effects of increasing different kinds of passenger transport subsidies discriminating between household types, travel purposes and travel modes. The effects are calculated by applying a numerical spatial general equilibrium approach calibrated to an average German metropolitan area. In extension to most studies focusing on only one kind of subsidy, we compare the effects of different transport subsidies within the same unified framework that allows to account for two features not yet considered simultaneously in studies on transport subsidies: endogenous labor supply and location decisions. Furthermore, congestion, travel mode choice, travel related CO₂ emissions and institutional details regarding the tax system in Germany are taken into account. The results suggest that optimal subsidy levels are either small or even zero. While subsidizing public transport is welfare enhancing, subsidies to urban road traffic reduce aggregate urban welfare. Concerning the latter it is shown that making investments in urban road infrastructure capacity or reducing gasoline taxes may even be harmful to residents using predominantly automobile. In contrast, pure commuting subsidies hardly affect aggregate urban welfare, but distributional effects are substantial. All policies cause suburbanization of city residents and (except for subsidizing public transport) contribute to urban sprawl by raising the spatial imbalance of residences and jobs but the effect is relatively small. In addition, the policies induce a very differentiated pattern regarding distributional effects, benefits of landowners and environmental effects.