Patterns of car usage and restraint modelling

Transport demand forecasting procedures have traditionally employed household based modal split models implicitly assuming a selection of mode for each trip based on relative generalised cost. A detailed examination of the trip patterns of a sample of household in West Yorkshire shows that in fact there is little discretionary choice of public transport; public transport trips in car owning households generally being explained in terms of the specific unavailability of the car for such trips. Two versions of a category analysis model for modal split are based on this observation and applied to household data for Glamorgan and Monmouthshire to show that such a procedure is workable and produces results comparing favourably with traditional approaches. The likely implications of three types of restraint policy are examined and it is concluded that the existing interdependence in trip patterns and modal choice within the household is of great significance in determining their effects. In particular it appears that positive attempts to increase vehicle occupancy at the peak are likely to be more favourable to public transport finances than the more negative policies to restrain use of the car for journey to work, or second car ownership.     

A maximum entropy-least squares estimator for elastic origin-destination trip matrix estimation

In transportation subnetwork-supernetwork analysis, it is well known that the origin-destination (O-D) flow table of a subnetwork is not only determined by trip generation and distribution, but also a result from traffic routing and diversion, due to the existence of internal-external, external-internal and external-external flows. This result indicates the variable nature of subnetwork O-D flows. This paper discusses an elastic O-D flow table estimation problem for subnetwork analysis. The underlying assumption is that each cell of the subnetwork O-D flow table contains an elastic demand function rather than a fixed demand rate and the demand function can capture all traffic diversion effect under various network changes. We propose a combined maximum entropy-least squares estimator, by which O-D flows are distributed over the subnetwork in terms of the maximum entropy principle, while demand function parameters are estimated for achieving the least sum of squared estimation errors. While the estimator is powered by the classic convex combination algorithm, computational difficulties emerge within the algorithm implementation until we incorporate partial optimality conditions and a column generation procedure into the algorithmic framework. Numerical results from applying the combined estimator to a couple of subnetwork examples show that an elastic O-D flow table, when used as input for subnetwork flow evaluations, reflects network flow changes significantly better than its fixed counterpart.     

Link choice proportions from trip distribution and assignment models: An overview and comparison

A number of estimation procedures have been suggested for the situation where a prior estimate of an origin-destination matrix is to be updated on the basis of recently-acquired traffic counts. These procedures assume that both the link flows and the proportionate usage of each link made by each origin-destination flow (referred to collectively as the link choice proportions) are known. This paper examines the possibility and methods for estimating the link choice proportions. Three methods are presented: (1) using ad hoc iteration between trip distribution and traffic assignment; (2) combining trip distribution and assignment in one step; (3) solving a new optimization problem in which the path flows are directly considered as variables and its optimal solution is governed by a logit type formula. The algorithms, covergencies and computational efficiencies of these methods are investigated. Results of testing the three methods on example networks are discussed.     

Validation of a schedule‐based capacity restraint transit assignment model for a large‐scale network

This paper describes the application of a capacity restraint trip assignment algorithm to a real, large‐scale transit network and the validation of the results. Unlike the conventional frequency‐based approach, the network formulation of the proposed model is dynamic and schedule‐based. Transit vehicles are assumed to operate to a set of pre‐determined schedules. Passengers are assumed to select paths based on a generalized cost function including in‐vehicle and out‐of‐vehicle time and line change penalty. The time‐varying passenger demand is loaded onto the network by a time increment simulation method, which ensures that the capacity restraint of each vehicle during passenger boarding is strictly observed. The optimal‐path and path‐loading algorithms are applied iteratively by the method of successive averages until the network converges to the predictive dynamic user equilibrium. The Hong Kong Mass Transit Railway network is used to validate the model results. The potential applications of the model are also discussed.     

A new fuzzy approach to estimate the O–D matrix from link volumes

Abstract

Estimation of the origin–destination (O–D) trip demand matrix plays a key role in travel analysis and transportation planning and operations. Many researchers have developed different O–D matrix estimation methods using traffic counts, which allow simple data collection as opposed to the costly traditional direct estimation methods based on home and roadside interviews.

In this paper, we present a new fuzzy model to estimate the O–D matrix from traffic counts. Since link data only represent a snapshot situation, resulting in inconsistency of data and poor quality of the estimated O–Ds, the proposed method considers the link data as a fuzzy number that varies within a certain bandwidth. Shafahi and Ramezani's fuzzy assignment method is improved upon and used to assign the estimated O–D matrix, which causes the assigned volumes to be fuzzy numbers similar to what is proposed for observed link counts. The shortest path algorithm of the proposed method is similar to the Floyd–Warshall algorithm, and we call it the Fuzzy Floyd–Warshall Algorithm. A new fuzzy comparing index is proposed by improving the fuzzy comparison method developed by Dubois and Prade to estimate and compare the distance between the assigned and observed link volumes. The O–D estimation model is formulated as a convex minimization problem based on the proposed fuzzy index to minimize the fuzzy distance between the observed and assigned link volumes. A gradient-based method is used to solve the problem. To ensure the original O–D matrix does not change more than necessary during the iterations, a fuzzy rule-based approach is proposed to control the matrix changes.     

Dynamic network equilibrium for daily activity-trip chains of heterogeneous travelers: application to large-scale networks

Applications of dynamic network equilibrium models have, mostly, considered the unit of traffic demand either as one-way trip, or as multiple independent trips. However, individuals’ travel patterns typically follow a sequence of trips chained together. In this study we aim at developing a general simulation-based dynamic network equilibrium algorithm for assignment of activity-trip chain demand. The trip chain of each individual trip maker is defined by the departure time at origin, sequence of activity destination locations, including the location of their intermediate destinations and their final destination, and activity duration at each of the intermediate destinations. Spatial and temporal dependency of subsequent trips on each other necessitate time and memory consuming calculations and storage of node-to-node time-dependent least generalized cost path trees, which is not practical for very large metropolitan area networks. We first propose a reformulation of the trip-based demand gap function formulation for the variational inequality formulation of the Bi-criterion Dynamic User Equilibrium (BDUE) problem. Next, we propose a solution algorithm for solving the BDUE problem with daily chain of activity-trips. Implementation of the algorithm for very large networks circumvents the need to store memory-intensive node-to-node time-dependent shortest path trees by implementing a destination-based time-dependent least generalized cost path finding algorithm, while maintaining the spatial and temporal dependency of subsequent trips. Numerical results for a real-world large scale network suggest that recognizing the dependency of multiple trips of a chain, and maintaining the departure time consistency of subsequent trips provide sharper drops in gap values, hence, the convergence could be achieved faster (compared to when trips are considered independent of each other).     

Path-constrained traffic assignment: A trip chain analysis under range anxiety

This paper proposes and analyzes a distance-constrained traffic assignment problem with trip chains embedded in equilibrium network flows. The purpose of studying this problem is to develop an appropriate modeling tool for characterizing traffic flow patterns in emerging transportation networks that serve a massive adoption of plug-in electric vehicles. This need arises from the facts that electric vehicles suffer from the “range anxiety” issue caused by the unavailability or insufficiency of public electricity-charging infrastructures and the far-below-expectation battery capacity. It is suggested that if range anxiety makes any impact on travel behaviors, it more likely occurs on the trip chain level rather than the trip level, where a trip chain here is defined as a series of trips between two possible charging opportunities (Tamor et al., 2013). The focus of this paper is thus given to the development of the modeling and solution methods for the proposed traffic assignment problem. In this modeling paradigm, given that trip chains are the basic modeling unit for individual decision making, any traveler’s combined travel route and activity location choices under the distance limit results in a distance-constrained, node-sequenced shortest path problem. A cascading labeling algorithm is developed for this shortest path problem and embedded into a linear approximation framework for equilibrium network solutions. The numerical result derived from an illustrative example clearly shows the mechanism and magnitude of the distance limit and trip chain settings in reshaping network flows from the simple case characterized merely by user equilibrium.     

The impact of ignoring intrazonal trips in assignment models: a stochastic approach

Transportation - In transportation modeling, intrazonal trips are frequently omitted during trip assignment. These trips are not assigned to the network because their origin and destination are in...     

An integrated multi‐objective model to determine the optimal rescue path and traffic controlled arcs for disaster relief operations under uncertainty environments

This study proposes an integrated multi‐objective model to determine the optimal rescue path and traffic controlled arcs for disaster relief operations under uncertainty environments. The model consists of three sub‐models: rescue shortest path model, post‐disaster traffic assignment model, and traffic controlled arcs selection model to minimize four objectives: travel time of rescue path, total detour travel time, number of unconnected trips of non‐victims, and number of police officers required. Since these sub‐models are inter‐related with each other, they are solved simultaneously. This study employs genetic algorithms incorporated with traffic assignment and K‐shortest path methods to determine optimal rescue path and controlled arcs. To cope with uncertain information associated with the damaged network, fuzzy system reliability theory (weakest t‐norm method) is used to measure the access reliability of rescue path. To investigate the validity and applicability of the proposed model, studies on an exemplified case and a field case of Chi‐Chi earthquake in Taiwan are conducted. The performances of three rescue strategies: without traffic control, selective traffic control (i.e. the proposed model) and absolute traffic control are compared. The results show that the proposed model can maintain the efficiency of rescue activity with minimal impact to ordinary trips and number of police officers required.     

Trip assignment to radial major roads

The problem of flow-dependent trip assignment is considered for a city with a small number of radial major roads. CBD-based work trips are assigned to these radial major roads on the basis that each commuter seeks to minimise his individual travel time. A system of differential equations is derived for the spatial pattern of trip assignment in a model city with a continuous distribution of home locations and a ring-radial road network. This system is then solved for the special case of a uniform distribution of home locations.     

A specialized equilibrium assignment algorithm for air quality modeling

A multiple user class equilibrium assignment algorithm is formulated to determine vehicle trips and the vehicle miles of travel (VMT) in various operating modes on highway links. A heuristic solution algorithm based on the Frank–Wolfe decomposition of the equilibrium assignment problem is presented. The treatment of intrazonal trips, which are very important for emission studies is also discussed. The solution algorithm is implemented in a traffic assignment program for emission studies, referred to as TAPES. The use of the algorithm is demonstrated through a TAPES model case study on a Charlotte, NC network database for 1990 AM peak period. The operating mode mix of VMT in cold transient, hot transient and hot stabilized modes, also known as the mix of cold-starts, hot-starts and stabilized mode trips, is derived on a link by link basis. The results are aggregated by facility type and the location of link segments. It is observed that the operating mode fractions in transient and stabilized modes could vary widely across different facility types geographic locations. The aggregated operating mode fractions derived from the assignment analysis indicates that a lesser proportion of VMT operates in cold and hot transient modes when compared to the operating mode mix derived from the Federal Test Procedure (FTP).     

Where do cyclists ride? A route choice model developed with revealed preference GPS data

To better understand bicyclists’ preferences for facility types, GPS units were used to observe the behavior of 164 cyclists in Portland, Oregon, USA for several days each. Trip purpose and several other trip-level variables recorded by the cyclists, and the resulting trips were coded to a highly detailed bicycle network. The authors used the 1449 non-exercise, utilitarian trips to estimate a bicycle route choice model. The model used a choice set generation algorithm based on multiple permutations of path attributes and was formulated to account for overlapping route alternatives. The findings suggest that cyclists are sensitive to the effects of distance, turn frequency, slope, intersection control (e.g. presence or absence of traffic signals), and traffic volumes. In addition, cyclists appear to place relatively high value on off-street bike paths, enhanced neighborhood bikeways with traffic calming features (aka “bicycle boulevards”), and bridge facilities. Bike lanes more or less exactly offset the negative effects of adjacent traffic, but were no more or less attractive than a basic low traffic volume street. Finally, route preferences differ between commute and other utilitarian trips; cyclists were more sensitive to distance and less sensitive to other infrastructure characteristics for commute trips.     

A comparative analysis of traditional four-step and activity-based travel demand modeling: a case study of Tampa,Florida

Activity-based travel demand modeling (ABTDM) has often been viewed as an advanced approach, due to its higher fidelity and better policy sensitivity. However, a review of the literature indicates that no study has been undertaken to investigate quantitatively the differences and accuracy between an ABTDM approach and a traditional four-step travel demand model. In this paper we provide a comparative analysis against each step – trip generation, trip distribution, mode split, and network assignment – between an ABTDM developed using travel diary data from the Tampa Bay Region in Florida and the Tampa Bay Regional Planning Model (TBRPM), an existing traditional four-step model for the same area. Results show salient differences between the TBRPM and the ABTDM, in terms of modeling performance and accuracy, in each of the four steps. For example, trip production rates calculated from the travel diary data are found to be either double or a quarter less than those used in the TBRPM. On the other hand, trip attraction rates computed from activity-based travel simulations are found to be either more than double or one tenth less than those used in the TBRPM. The trip distribution curves from the two models are similar, but both average and peak trip lengths of the two are significantly different. Mode split analyses show that the TBRPM may underestimate driving trips and fail to capture any usage of alternative modes, such as taxi and nonmotorized (e.g., walking and bicycling) modes. In addition, the ABTDMs are found to be less capable of reproducing observed traffic counts when compared to the TBRPM, most likely due to not considering external and through trips. The comparative results presented can help transportation engineers and planners better understand the strengths and weaknesses of the two types of model and this should assist decision-makers in choosing a better modeling tool for their planning initiatives.     

Inferences on trip matrices from observations on link volumes: A Bayesian statistical approach

Previous methods for estimating a trip matrix from traffic volume counts have used the principles of maximum entropy and minimum information. These techniques implicitly give as little weight to prior information on the trip matrix as possible. The new method proposed here is based on Bayesian statistical inference and has several advantages over these earlier approaches. It allows complete flexibility in the degree of belief placed on the prior estimate of the trip matrix and also allows for different degrees of belief in diffeent parts of the prior estimate. Furthermore under certain assumptions the method reduces to a simple updating scheme in which observations on the link flows successively modify the trip matrix. At the end of the scheme confidence intervals are available for the estimates of the trip matrix elements.     

An investigation of the reliability of real-time information for route choice decisions in a congested traffic system

This paper investigates the reliability of information on prevailing trip times on the links of a network as a basis for route choice decisions by individual drivers. It considers a type of information strategy in which no attempt is made by some central controller or coordinating entity to predict what the travel times on each link would be by the time it is reached by a driver that is presently at a given location. A specially modified model combining traffic simulation and path assignment capabilities is used to analyze the reliability of the real-time information supplied to the drivers. This is accomplished by comparing the supplied travel times (at the link and path levels) to the actual trip times experienced in the network after the information has been given. In addition, the quality of the decisions made by drivers on the basis of this information (under alternative path switching rules) is evaluated ex-post by comparing the actually experienced travel time (given the decision made) to the time that the driver would have experienced without the real-time information. Results of a series of simulation experiments under recurrent congestion conditions are discussed, illustrating the interactions between information reliability and user response.     

Effects of household structure and selected travel characteristics on trip chaining

This paper analyzes trip chaining, focusing on how households organize non-work travel. A trip chaining typology is developed using household survey data from Portland, Oregon. Households are organized according to demographic structure, allowing analysis of trip chaining differences among household types. A logit model of the propensity to link non-work trips to the work commute is estimated. A more general model of household allocation of non-work travel among three alternative chain types — work commutes, multi-stop non-work journeys, and unlinked trips — is also developed and estimated. Empirical results indicate that the likelihood of linking work and non-work travel, and the more general organization of non-work travel, varies with respect to household structure and other factors which previous studies have found to be important. The effects of two congestion indicators on trip chaining were mixed: workers who commuted in peak periods were found to have lower propensity to form work/non-work chains, while a more general congestion indicator had no effect on the allocation of non-work trips among alternative chains.     

Estimating time dependent O‐D trip tables during peak periods

Intelligent transportation systems (ITS) have been used to alleviate congestion problems arising due to demand during peak periods. The success of ITS strategies relies heavily on two factors: 1) the ability to accurately estimate the temporal and spatial distribution of travel demand on the transportation network during peak periods, and, 2) providing real‐time route guidance to users. This paper addresses the first factor. A model to estimate time dependent origin‐destination (O‐D) trip tables in urban areas during peak periods is proposed. The daily peak travel period is divided into several time slices to facilitate simulation and modeling. In urban areas, a majority of the trips during peak periods are work trips. For illustration purposes, only peak period work trips are considered in this paper. The proposed methodology is based on the arrival pattern of trips at a traffic analysis zone (TAZ) and the distribution of their travel times. The travel time matrix for the peak period, the O‐D trip table for the peak period, and the number of trips expected to arrive at each TAZ at different work start times are inputs to the model. The model outputs are O‐D trip tables for each time slice in the peak period. 1995 data for the Las Vegas metropolitan area are considered for testing and validating the model, and its application. The model is reasonably robust, but some lack of precision was observed. This is due to two possible reasons: 1) rounding‐off, and, 2) low ratio of total number of trips to total number of O‐D pair combinations. Hence, an attempt is made to study the effect of increasing this ratio on error estimates. The ratio is increased by multiplying each O‐D pair trip element with a scaling factor. Better estimates were obtained. Computational issues involved with the simulation and modeling process are discussed.     

An empirical study of simulation-based dynamic traffic assignment procedures

Abstract

Under Intelligent Transportation Systems (ITS), real-time operations of traffic management measures depend on long-term planning results, such as the origin–destination (OD) trip distribution; however, results from current planning procedures are unable to provide fundamental data for dynamic analysis. In order to capture dynamic traffic characteristics, transportation planning models should play an important role to integrate basic data with real-time traffic management and control. In this paper, a heuristic algorithm is proposed to establish the linkage between daily OD trips and dynamic traffic assignment (DTA) procedures; thus results from transportation planning projects, in terms of daily OD trips, can be extended to estimate time-dependent OD trips. Field data from Taiwan are collected and applied in the calibration and validation processes. Dynamic Network Assignment-Simulation Model for Advanced Road Telematics (DYNASMART-P), a simulation-based DTA model, is applied to generate time-dependent flows. The results from the validation process show high agreement between actual flows from vehicle detectors (VDs) and simulated flows from DYNAMSART-P.     

Some developments in equilibrium traffic assignment

A network optimization problem is formulated which yields a probabilistic equilibrated traffic assignment incorporating congestion effects and which as a special case, reduces to a user optimized equilibrium solution. In the resulting model, path choice is determined by a logit formula in which path costs are functions of the assigned flows. The article also demonstrates the similarity between some fixed demand incremental methods of traffic assignment and the minimization problem associated with computing the user equilibrium assignment.     

A note on trip matrix estimation from link traffic count data

In this note, a simple network equilibrium based approach for estimating a trip matrix using link traffic count data is proposed. In essence a combined distribution and assignment model is formulated in which the link flow data serve to furnish an estimate for the sum of the integrals of the link cost functions. A comparison of this model with others proposed previously is made.